diff options
author | Kai-Heng Feng <kai.heng.feng@canonical.com> | 2018-10-19 16:14:50 +0800 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2018-11-07 13:23:18 +0100 |
commit | 781f0766cc41a9dd2e5d118ef4b1d5d89430257b (patch) | |
tree | bd0c7b489f471e7754f3adbd78f44ca555b42bc5 /Documentation/admin-guide/kernel-parameters.txt | |
parent | 651022382c7f8da46cb4872a545ee1da6d097d2a (diff) |
USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub
Devices connected under Terminus Technology Inc. Hub (1a40:0101) may
fail to work after the system resumes from suspend:
[ 206.063325] usb 3-2.4: reset full-speed USB device number 4 using xhci_hcd
[ 206.143691] usb 3-2.4: device descriptor read/64, error -32
[ 206.351671] usb 3-2.4: device descriptor read/64, error -32
Info for this hub:
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1a40 ProdID=0101 Rev=01.11
S: Product=USB 2.0 Hub
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
Some expirements indicate that the USB devices connected to the hub are
innocent, it's the hub itself is to blame. The hub needs extra delay
time after it resets its port.
Hence wait for extra delay, if the device is connected to this quirky
hub.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'Documentation/admin-guide/kernel-parameters.txt')
-rw-r--r-- | Documentation/admin-guide/kernel-parameters.txt | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 81d1d5a74728..19f4423e70d9 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -4713,6 +4713,8 @@ prevent spurious wakeup); n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a pause after every control message); + o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra + delay after resetting its port); Example: quirks=0781:5580:bk,0a5c:5834:gij usbhid.mousepoll= |