Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 - V4L2 API additions to better support JPEG compression control
 - media API additions to properly support MPEG decoders
 - V4L2 API additions for image crop/scaling
 - a few other V4L2 API DocBook fixes/improvements
 - two new DVB frontend drivers: m88rs2000 and rtl2830
 - two new DVB drivers: az6007 and rtl28xxu
 - a framework for ISA drivers, that removed lots of common code found
   at the ISA radio drivers
 - a new FM transmitter driver (radio-keene)
 - a GPIO-based IR receiver driver
 - a new sensor driver: mt9m032
 - some new video drivers: adv7183, blackfin, mx2_emmaprp, sii9234_drv,
   vs6624
 - several new board additions, driver fixes, improvements and cleanups.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (295 commits)
  [media] update CARDLIST.em28xx
  [media] partially reverts changeset fa5527c
  [media] stb0899: fix the limits for signal strength values
  [media] em28xx: support for 2304:0242 PCTV QuatroStick (510e)
  [media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e)
  [media] -EINVAL -> -ENOTTY
  [media] gspca - sn9c20x: Cleanup source
  [media] gspca - sn9c20x: Simplify register write for capture start/stop
  [media] gspca - sn9c20x: Add automatic JPEG compression mechanism
  [media] gspca - sn9c20x: Greater delay in case of sensor no response
  [media] gspca - sn9c20x: Optimize the code of write sequences
  [media] gspca - sn9c20x: Add the JPEG compression quality control
  [media] gspca - sn9c20x: Add a delay after Omnivision sensor reset
  [media] gspca - sn9c20x: Propagate USB errors to higher level
  [media] gspca - sn9c20x: Use the new video control mechanism
  [media] gspca - sn9c20x: Fix loss of frame start
  [media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k
  [media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor
  [media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support
  [media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5
  ...

11 files changed, 644 insertions, 66 deletions

diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml
index cea6fd3ed428..7dc65c592a87 100644
--- a/Documentation/DocBook/media/v4l/biblio.xml
+++ b/Documentation/DocBook/media/v4l/biblio.xml
@@ -128,6 +128,26 @@ url="http://www.ijg.org">http://www.ijg.org</ulink>)</corpauthor>
       <subtitle>Version 1.02</subtitle>
     </biblioentry>
 
+    <biblioentry id="itu-t81">
+      <abbrev>ITU-T.81</abbrev>
+      <authorgroup>
+	<corpauthor>International Telecommunication Union
+(<ulink url="http://www.itu.int">http://www.itu.int</ulink>)</corpauthor>
+      </authorgroup>
+      <title>ITU-T Recommendation T.81
+"Information Technology &mdash; Digital Compression and Coding of Continous-Tone
+Still Images &mdash; Requirements and Guidelines"</title>
+    </biblioentry>
+
+    <biblioentry id="w3c-jpeg-jfif">
+      <abbrev>W3C JPEG JFIF</abbrev>
+      <authorgroup>
+	<corpauthor>The World Wide Web Consortium (<ulink
+url="http://www.w3.org/Graphics/JPEG">http://www.w3.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>JPEG JFIF</title>
+    </biblioentry>
+
     <biblioentry id="smpte12m">
       <abbrev>SMPTE&nbsp;12M</abbrev>
       <authorgroup>
diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index a2485b3ff3d2..bce97c50391b 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -2393,6 +2393,20 @@ details.</para>
 	    to the <link linkend="control">User controls class</link>.
 	  </para>
         </listitem>
+        <listitem>
+	  <para>Added the device_caps field to struct v4l2_capabilities and added the new
+	  V4L2_CAP_DEVICE_CAPS capability.</para>
+        </listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 3.4</title>
+      <orderedlist>
+        <listitem>
+	  <para>Added <link linkend="jpeg-controls">JPEG compression control
+	  class</link>.</para>
+        </listitem>
       </orderedlist>
     </section>
 
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index a1be37897ad7..b84f25e9cc87 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -1286,6 +1286,49 @@ produce a slight hiss, but in the encoder itself, guaranteeing a fixed
 and reproducible audio bitstream. 0 = unmuted, 1 = muted.</entry>
 	      </row>
 	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-audio-dec-playback">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_audio_dec_playback</entry>
+	      </row><row><entry spanname="descr">Determines how monolingual audio should be played back.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO</constant>&nbsp;</entry>
+		      <entry>Automatically determines the best playback mode.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO</constant>&nbsp;</entry>
+		      <entry>Stereo playback.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT</constant>&nbsp;</entry>
+		      <entry>Left channel playback.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT</constant>&nbsp;</entry>
+		      <entry>Right channel playback.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO</constant>&nbsp;</entry>
+		      <entry>Mono playback.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO</constant>&nbsp;</entry>
+		      <entry>Stereo playback with swapped left and right channels.</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-audio-dec-multilingual-playback">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_audio_dec_playback</entry>
+	      </row><row><entry spanname="descr">Determines how multilingual audio should be played back.</entry>
+	      </row>
+	      <row><entry></entry></row>
 	      <row id="v4l2-mpeg-video-encoding">
 		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_ENCODING</constant>&nbsp;</entry>
 		<entry>enum&nbsp;v4l2_mpeg_video_encoding</entry>
@@ -1447,6 +1490,22 @@ of the video. The supplied 32-bit integer is interpreted as follows (bit
 		  </tbody>
 		</entrytbl>
 	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-video-dec-pts">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DEC_PTS</constant>&nbsp;</entry>
+		<entry>integer64</entry>
+	      </row><row><entry spanname="descr">This read-only control returns the
+33-bit video Presentation Time Stamp as defined in ITU T-REC-H.222.0 and ISO/IEC 13818-1 of
+the currently displayed frame. This is the same PTS as is used in &VIDIOC-DECODER-CMD;.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-video-dec-frame">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DEC_FRAME</constant>&nbsp;</entry>
+		<entry>integer64</entry>
+	      </row><row><entry spanname="descr">This read-only control returns the
+frame counter of the frame that is currently displayed (decoded). This value is reset to 0 whenever
+the decoder is started.</entry>
+	      </row>
 
 
 	      <row><entry></entry></row>
@@ -3377,6 +3436,167 @@ interface and may change in the future.</para>
 	</tbody>
       </tgroup>
       </table>
+    </section>
+
+    <section id="jpeg-controls">
+      <title>JPEG Control Reference</title>
+      <para>The JPEG class includes controls for common features of JPEG
+      encoders and decoders. Currently it includes features for codecs
+      implementing progressive baseline DCT compression process with
+      Huffman entrophy coding.</para>
+      <table pgwide="1" frame="none" id="jpeg-control-id">
+      <title>JPEG Control IDs</title>
 
+      <tgroup cols="4">
+	<colspec colname="c1" colwidth="1*" />
+	<colspec colname="c2" colwidth="6*" />
+	<colspec colname="c3" colwidth="2*" />
+	<colspec colname="c4" colwidth="6*" />
+	<spanspec namest="c1" nameend="c2" spanname="id" />
+	<spanspec namest="c2" nameend="c4" spanname="descr" />
+	<thead>
+	  <row>
+	    <entry spanname="id" align="left">ID</entry>
+	    <entry align="left">Type</entry>
+	  </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry>
+	  </row>
+	</thead>
+	<tbody valign="top">
+	  <row><entry></entry></row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_JPEG_CLASS</constant>&nbsp;</entry>
+	    <entry>class</entry>
+	  </row><row><entry spanname="descr">The JPEG class descriptor. Calling
+	  &VIDIOC-QUERYCTRL; for this control will return a description of this
+	  control class.
+
+	</entry>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_JPEG_CHROMA_SUBSAMPLING</constant></entry>
+	    <entry>menu</entry>
+	  </row>
+	  <row id="jpeg-chroma-subsampling-control">
+	    <entry spanname="descr">The chroma subsampling factors describe how
+	    each component of an input image is sampled, in respect to maximum
+	    sample rate in each spatial dimension. See <xref linkend="itu-t81"/>,
+	    clause A.1.1. for more details. The <constant>
+	    V4L2_CID_JPEG_CHROMA_SUBSAMPLING</constant> control determines how
+	    Cb and Cr components are downsampled after coverting an input image
+	    from RGB to Y'CbCr color space.
+	    </entry>
+	  </row>
+	  <row>
+	    <entrytbl spanname="descr" cols="2">
+	      <tbody valign="top">
+		<row>
+		  <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_444</constant>
+		  </entry><entry>No chroma subsampling, each pixel has
+		  Y, Cr and Cb values.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_422</constant>
+		  </entry><entry>Horizontally subsample Cr, Cb components
+		  by a factor of 2.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_420</constant>
+		  </entry><entry>Subsample Cr, Cb components horizontally
+		  and vertically by 2.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_411</constant>
+		  </entry><entry>Horizontally subsample Cr, Cb components
+		  by a factor of 4.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_410</constant>
+		  </entry><entry>Subsample Cr, Cb components horizontally
+		  by 4 and vertically by 2.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY</constant>
+		  </entry><entry>Use only luminance component.</entry>
+		</row>
+	      </tbody>
+	    </entrytbl>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_JPEG_RESTART_INTERVAL</constant>
+	    </entry><entry>integer</entry>
+	  </row>
+	  <row><entry spanname="descr">
+	      The restart interval determines an interval of inserting RSTm
+	      markers (m = 0..7). The purpose of these markers is to additionally
+	      reinitialize the encoder process, in order to process blocks of
+	      an image independently.
+	      For the lossy compression processes the restart interval unit is
+	      MCU (Minimum Coded Unit) and its value is contained in DRI
+	      (Define Restart Interval) marker. If <constant>
+	      V4L2_CID_JPEG_RESTART_INTERVAL</constant> control is set to 0,
+	      DRI and RSTm markers will not be inserted.
+	    </entry>
+	  </row>
+	  <row id="jpeg-quality-control">
+	    <entry spanname="id"><constant>V4L2_CID_JPEG_COMPRESION_QUALITY</constant></entry>
+	    <entry>integer</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">
+	      <constant>V4L2_CID_JPEG_COMPRESION_QUALITY</constant> control
+	      determines trade-off between image quality and size.
+	      It provides simpler method for applications to control image quality,
+	      without a need for direct reconfiguration of luminance and chrominance
+	      quantization tables.
+
+	      In cases where a driver uses quantization tables configured directly
+	      by an application, using interfaces defined elsewhere, <constant>
+	      V4L2_CID_JPEG_COMPRESION_QUALITY</constant> control should be set
+	      by driver to 0.
+
+	      <para>The value range of this control is driver-specific. Only
+	      positive, non-zero values are meaningful. The recommended range
+	      is 1 - 100, where larger values correspond to better image quality.
+	      </para>
+	    </entry>
+	    </row>
+	  <row id="jpeg-active-marker-control">
+	    <entry spanname="id"><constant>V4L2_CID_JPEG_ACTIVE_MARKER</constant></entry>
+	    <entry>bitmask</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">Specify which JPEG markers are included
+	    in compressed stream. This control is valid only for encoders.
+	    </entry>
+	  </row>
+	  <row>
+	    <entrytbl spanname="descr" cols="2">
+	      <tbody valign="top">
+		<row>
+		  <entry><constant>V4L2_JPEG_ACTIVE_MARKER_APP0</constant></entry>
+		  <entry>Application data segment APP<subscript>0</subscript>.</entry>
+		</row><row>
+		  <entry><constant>V4L2_JPEG_ACTIVE_MARKER_APP1</constant></entry>
+		  <entry>Application data segment APP<subscript>1</subscript>.</entry>
+		</row><row>
+		  <entry><constant>V4L2_JPEG_ACTIVE_MARKER_COM</constant></entry>
+		  <entry>Comment segment.</entry>
+		</row><row>
+		  <entry><constant>V4L2_JPEG_ACTIVE_MARKER_DQT</constant></entry>
+		  <entry>Quantization tables segment.</entry>
+		</row><row>
+		  <entry><constant>V4L2_JPEG_ACTIVE_MARKER_DHT</constant></entry>
+		  <entry>Huffman tables segment.</entry>
+		</row>
+	      </tbody>
+	    </entrytbl>
+	  </row>
+	  <row><entry></entry></row>
+	</tbody>
+      </tgroup>
+      </table>
+      <para>For more details about JPEG specification, refer
+      to <xref linkend="itu-t81"/>, <xref linkend="jfif"/>,
+      <xref linkend="w3c-jpeg-jfif"/>.</para>
     </section>
 </section>
diff --git a/Documentation/DocBook/media/v4l/selection-api.xml b/Documentation/DocBook/media/v4l/selection-api.xml
index 2f0bdb4d5551..b299e4779354 100644
--- a/Documentation/DocBook/media/v4l/selection-api.xml
+++ b/Documentation/DocBook/media/v4l/selection-api.xml
@@ -52,6 +52,10 @@ cropping and composing rectangles have the same size.</para>
 	  </textobject>
 	</mediaobject>
       </figure>
+
+For complete list of the available selection targets see table <xref
+linkend="v4l2-sel-target"/>
+
     </section>
 
   <section>
@@ -186,7 +190,7 @@ V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target.</para>
 
    <section>
 
-     <title>Scaling control.</title>
+     <title>Scaling control</title>
 
 <para>An application can detect if scaling is performed by comparing the width
 and the height of rectangles obtained using <constant> V4L2_SEL_TGT_CROP_ACTIVE
@@ -200,7 +204,7 @@ the scaling ratios using these values.</para>
 
   <section>
 
-    <title>Comparison with old cropping API.</title>
+    <title>Comparison with old cropping API</title>
 
 <para>The selection API was introduced to cope with deficiencies of previous
 <link linkend="crop"> API </link>, that was designed to control simple capture
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml
index e97c512861bb..8ae38876172e 100644
--- a/Documentation/DocBook/media/v4l/v4l2.xml
+++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -128,6 +128,22 @@ structs, ioctls) must be noted in more detail in the history chapter
 applications. -->
 
       <revision>
+	<revnumber>3.4</revnumber>
+	<date>2012-01-25</date>
+	<authorinitials>sn</authorinitials>
+	<revremark>Added <link linkend="jpeg-controls">JPEG compression
+	    control class.</link>
+	</revremark>
+      </revision>
+
+      <revision>
+	<revnumber>3.3</revnumber>
+	<date>2012-01-11</date>
+	<authorinitials>hv</authorinitials>
+	<revremark>Added device_caps field to struct v4l2_capabilities.</revremark>
+      </revision>
+
+      <revision>
 	<revnumber>3.2</revnumber>
 	<date>2011-08-26</date>
 	<authorinitials>hv</authorinitials>
@@ -417,7 +433,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 3.2</subtitle>
+ <subtitle>Revision 3.3</subtitle>
 
   <chapter id="common">
     &sub-common;
@@ -473,6 +489,7 @@ and discussions on the V4L mailing list.</revremark>
     &sub-cropcap;
     &sub-dbg-g-chip-ident;
     &sub-dbg-g-register;
+    &sub-decoder-cmd;
     &sub-dqevent;
     &sub-encoder-cmd;
     &sub-enumaudio;
diff --git a/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml b/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml
new file mode 100644
index 000000000000..74b87f6e480a
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml
@@ -0,0 +1,256 @@
+<refentry id="vidioc-decoder-cmd">
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_DECODER_CMD, VIDIOC_TRY_DECODER_CMD</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_DECODER_CMD</refname>
+    <refname>VIDIOC_TRY_DECODER_CMD</refname>
+    <refpurpose>Execute an decoder command</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>struct v4l2_decoder_cmd *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>&fd;</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>VIDIOC_DECODER_CMD, VIDIOC_TRY_DECODER_CMD</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <note>
+      <title>Experimental</title>
+
+      <para>This is an <link linkend="experimental">experimental</link>
+interface and may change in the future.</para>
+    </note>
+
+    <para>These ioctls control an audio/video (usually MPEG-) decoder.
+<constant>VIDIOC_DECODER_CMD</constant> sends a command to the
+decoder, <constant>VIDIOC_TRY_DECODER_CMD</constant> can be used to
+try a command without actually executing it. To send a command applications
+must initialize all fields of a &v4l2-decoder-cmd; and call
+<constant>VIDIOC_DECODER_CMD</constant> or <constant>VIDIOC_TRY_DECODER_CMD</constant>
+with a pointer to this structure.</para>
+
+    <para>The <structfield>cmd</structfield> field must contain the
+command code. Some commands use the <structfield>flags</structfield> field for
+additional information.
+</para>
+
+    <para>A <function>write</function>() or &VIDIOC-STREAMON; call sends an implicit
+START command to the decoder if it has not been started yet.
+</para>
+
+    <para>A <function>close</function>() or &VIDIOC-STREAMOFF; call of a streaming
+file descriptor sends an implicit immediate STOP command to the decoder, and all
+buffered data is discarded.</para>
+
+    <para>These ioctls are optional, not all drivers may support
+them. They were introduced in Linux 3.3.</para>
+
+    <table pgwide="1" frame="none" id="v4l2-decoder-cmd">
+      <title>struct <structname>v4l2_decoder_cmd</structname></title>
+      <tgroup cols="5">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>cmd</structfield></entry>
+            <entry></entry>
+            <entry></entry>
+	    <entry>The decoder command, see <xref linkend="decoder-cmds" />.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>flags</structfield></entry>
+            <entry></entry>
+            <entry></entry>
+	    <entry>Flags to go with the command. If no flags are defined for
+this command, drivers and applications must set this field to zero.</entry>
+	  </row>
+	  <row>
+	    <entry>union</entry>
+	    <entry>(anonymous)</entry>
+            <entry></entry>
+	    <entry></entry>
+            <entry></entry>
+	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry>struct</entry>
+            <entry><structfield>start</structfield></entry>
+            <entry></entry>
+            <entry>Structure containing additional data for the
+<constant>V4L2_DEC_CMD_START</constant> command.</entry>
+	  </row>
+	  <row>
+            <entry></entry>
+            <entry></entry>
+	    <entry>__s32</entry>
+	    <entry><structfield>speed</structfield></entry>
+            <entry>Playback speed and direction. The playback speed is defined as
+<structfield>speed</structfield>/1000 of the normal speed. So 1000 is normal playback.
+Negative numbers denote reverse playback, so -1000 does reverse playback at normal
+speed. Speeds -1, 0 and 1 have special meanings: speed 0 is shorthand for 1000
+(normal playback). A speed of 1 steps just one frame forward, a speed of -1 steps
+just one frame back.
+	    </entry>
+	  </row>
+	  <row>
+            <entry></entry>
+            <entry></entry>
+	    <entry>__u32</entry>
+	    <entry><structfield>format</structfield></entry>
+            <entry>Format restrictions. This field is set by the driver, not the
+application. Possible values are <constant>V4L2_DEC_START_FMT_NONE</constant> if
+there are no format restrictions or <constant>V4L2_DEC_START_FMT_GOP</constant>
+if the decoder operates on full GOPs (<wordasword>Group Of Pictures</wordasword>).
+This is usually the case for reverse playback: the decoder needs full GOPs, which
+it can then play in reverse order. So to implement reverse playback the application
+must feed the decoder the last GOP in the video file, then the GOP before that, etc. etc.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry>struct</entry>
+            <entry><structfield>stop</structfield></entry>
+            <entry></entry>
+            <entry>Structure containing additional data for the
+<constant>V4L2_DEC_CMD_STOP</constant> command.</entry>
+	  </row>
+	  <row>
+            <entry></entry>
+            <entry></entry>
+	    <entry>__u64</entry>
+	    <entry><structfield>pts</structfield></entry>
+            <entry>Stop playback at this <structfield>pts</structfield> or immediately
+if the playback is already past that timestamp. Leave to 0 if you want to stop after the
+last frame was decoded.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry>struct</entry>
+            <entry><structfield>raw</structfield></entry>
+            <entry></entry>
+            <entry></entry>
+	  </row>
+	  <row>
+            <entry></entry>
+            <entry></entry>
+	    <entry>__u32</entry>
+	    <entry><structfield>data</structfield>[16]</entry>
+	    <entry>Reserved for future extensions. Drivers and
+applications must set the array to zero.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="decoder-cmds">
+      <title>Decoder Commands</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>V4L2_DEC_CMD_START</constant></entry>
+	    <entry>0</entry>
+	    <entry>Start the decoder. When the decoder is already
+running or paused, this command will just change the playback speed.
+That means that calling <constant>V4L2_DEC_CMD_START</constant> when
+the decoder was paused will <emphasis>not</emphasis> resume the decoder.
+You have to explicitly call <constant>V4L2_DEC_CMD_RESUME</constant> for that.
+This command has one flag:
+<constant>V4L2_DEC_CMD_START_MUTE_AUDIO</constant>. If set, then audio will
+be muted when playing back at a non-standard speed.
+            </entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_DEC_CMD_STOP</constant></entry>
+	    <entry>1</entry>
+	    <entry>Stop the decoder. When the decoder is already stopped,
+this command does nothing. This command has two flags:
+if <constant>V4L2_DEC_CMD_STOP_TO_BLACK</constant> is set, then the decoder will
+set the picture to black after it stopped decoding. Otherwise the last image will
+repeat. If <constant>V4L2_DEC_CMD_STOP_IMMEDIATELY</constant> is set, then the decoder
+stops immediately (ignoring the <structfield>pts</structfield> value), otherwise it
+will keep decoding until timestamp >= pts or until the last of the pending data from
+its internal buffers was decoded.
+</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_DEC_CMD_PAUSE</constant></entry>
+	    <entry>2</entry>
+	    <entry>Pause the decoder. When the decoder has not been
+started yet, the driver will return an &EPERM;. When the decoder is
+already paused, this command does nothing. This command has one flag:
+if <constant>V4L2_DEC_CMD_PAUSE_TO_BLACK</constant> is set, then set the
+decoder output to black when paused.
+</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_DEC_CMD_RESUME</constant></entry>
+	    <entry>3</entry>
+	    <entry>Resume decoding after a PAUSE command. When the
+decoder has not been started yet, the driver will return an &EPERM;.
+When the decoder is already running, this command does nothing. No
+flags are defined for this command.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+
+    <variablelist>
+      <varlistentry>
+	<term><errorcode>EINVAL</errorcode></term>
+	<listitem>
+	  <para>The <structfield>cmd</structfield> field is invalid.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><errorcode>EPERM</errorcode></term>
+	<listitem>
+	  <para>The application sent a PAUSE or RESUME command when
+the decoder was not running.</para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml b/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml
index af7f3f2a36dd..f431b3ba79bd 100644
--- a/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml
@@ -74,15 +74,16 @@ only used by the STOP command and contains one bit: If the
 encoding will continue until the end of the current <wordasword>Group
 Of Pictures</wordasword>, otherwise it will stop immediately.</para>
 
-    <para>A <function>read</function>() call sends a START command to
-the encoder if it has not been started yet. After a STOP command,
+    <para>A <function>read</function>() or &VIDIOC-STREAMON; call sends an implicit
+START command to the encoder if it has not been started yet. After a STOP command,
 <function>read</function>() calls will read the remaining data
 buffered by the driver. When the buffer is empty,
 <function>read</function>() will return zero and the next
 <function>read</function>() call will restart the encoder.</para>
 
-    <para>A <function>close</function>() call sends an immediate STOP
-to the encoder, and all buffered data is discarded.</para>
+    <para>A <function>close</function>() or &VIDIOC-STREAMOFF; call of a streaming
+file descriptor sends an implicit immediate STOP to the encoder, and all buffered
+data is discarded.</para>
 
     <para>These ioctls are optional, not all drivers may support
 them. They were introduced in Linux 2.6.21.</para>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml b/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml
index 01ea24b84385..48748499c097 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml
@@ -57,6 +57,11 @@
   <refsect1>
     <title>Description</title>
 
+    <para>These ioctls are <emphasis role="bold">deprecated</emphasis>.
+    New drivers and applications should use <link linkend="jpeg-controls">
+    JPEG class controls</link> for image quality and JPEG markers control.
+    </para>
+
     <para>[to do]</para>
 
     <para>Ronald Bultje elaborates:</para>
@@ -86,7 +91,10 @@ to add them.</para>
 	  <row>
 	    <entry>int</entry>
 	    <entry><structfield>quality</structfield></entry>
-	    <entry></entry>
+	    <entry>Deprecated. If <link linkend="jpeg-quality-control"><constant>
+	    V4L2_CID_JPEG_IMAGE_QUALITY</constant></link> control is exposed by
+	    a driver applications should use it instead and ignore this field.
+	    </entry>
 	  </row>
 	  <row>
 	    <entry>int</entry>
@@ -116,7 +124,11 @@ to add them.</para>
 	  <row>
 	    <entry>__u32</entry>
 	    <entry><structfield>jpeg_markers</structfield></entry>
-	    <entry>See <xref linkend="jpeg-markers" />.</entry>
+	    <entry>See <xref linkend="jpeg-markers"/>. Deprecated.
+	    If <link linkend="jpeg-active-marker-control"><constant>
+	    V4L2_CID_JPEG_ACTIVE_MARKER</constant></link> control
+	    is exposed by a driver applications should use it instead
+	    and ignore this field.</entry>
 	  </row>
 	</tbody>
       </tgroup>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml
index a9d36e0c090e..bb04eff75f45 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml
@@ -58,43 +58,43 @@
 
     <para>The ioctls are used to query and configure selection rectangles.</para>
 
-<para> To query the cropping (composing) rectangle set <structfield>
-&v4l2-selection;::type </structfield> to the respective buffer type.  Do not
-use multiplanar buffers.  Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE
+<para> To query the cropping (composing) rectangle set &v4l2-selection;
+<structfield> type </structfield> field to the respective buffer type.
+Do not use multiplanar buffers.  Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE
 </constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE
 </constant>.  Use <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> instead of
 <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE </constant>.  The next step is
-setting <structfield> &v4l2-selection;::target </structfield> to value
-<constant> V4L2_SEL_TGT_CROP_ACTIVE </constant>