Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
	drivers/net/wimax/i2400m/usb-notif.c

4 files changed, 6352 insertions, 5 deletions

diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 1462ed86d40a..a3a83d38f96f 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -12,7 +12,8 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
-	    mac80211.xml debugobjects.xml sh.xml regulator.xml
+	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
+	    alsa-driver-api.xml writing-an-alsa-driver.xml
 
 ###
 # The build process is as follows (targets):
diff --git a/Documentation/DocBook/alsa-driver-api.tmpl b/Documentation/DocBook/alsa-driver-api.tmpl
new file mode 100644
index 000000000000..0230a96f0564
--- /dev/null
+++ b/Documentation/DocBook/alsa-driver-api.tmpl
@@ -0,0 +1,109 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<!-- ****************************************************** -->
+<!-- Header  -->
+<!-- ****************************************************** -->
+<book id="ALSA-Driver-API">
+  <bookinfo>
+    <title>The ALSA Driver API</title>
+
+    <legalnotice>
+    <para>
+    This document is free; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version. 
+    </para>
+
+    <para>
+    This document is distributed in the hope that it will be useful,
+    but <emphasis>WITHOUT ANY WARRANTY</emphasis>; without even the
+    implied warranty of <emphasis>MERCHANTABILITY or FITNESS FOR A
+    PARTICULAR PURPOSE</emphasis>. See the GNU General Public License
+    for more details.
+    </para>
+
+    <para>
+    You should have received a copy of the GNU General Public
+    License along with this program; if not, write to the Free
+    Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    MA 02111-1307 USA
+    </para>
+    </legalnotice>
+
+  </bookinfo>
+
+<toc></toc>
+
+  <chapter><title>Management of Cards and Devices</title>
+     <sect1><title>Card Management</title>
+!Esound/core/init.c
+     </sect1>
+     <sect1><title>Device Components</title>
+!Esound/core/device.c
+     </sect1>
+     <sect1><title>Module requests and Device File Entries</title>
+!Esound/core/sound.c
+     </sect1>
+     <sect1><title>Memory Management Helpers</title>
+!Esound/core/memory.c
+!Esound/core/memalloc.c
+     </sect1>
+  </chapter>
+  <chapter><title>PCM API</title>
+     <sect1><title>PCM Core</title>
+!Esound/core/pcm.c
+!Esound/core/pcm_lib.c
+!Esound/core/pcm_native.c
+     </sect1>
+     <sect1><title>PCM Format Helpers</title>
+!Esound/core/pcm_misc.c
+     </sect1>
+     <sect1><title>PCM Memory Management</title>
+!Esound/core/pcm_memory.c
+     </sect1>
+  </chapter>
+  <chapter><title>Control/Mixer API</title>
+     <sect1><title>General Control Interface</title>
+!Esound/core/control.c
+     </sect1>
+     <sect1><title>AC97 Codec API</title>
+!Esound/pci/ac97/ac97_codec.c
+!Esound/pci/ac97/ac97_pcm.c
+     </sect1>
+     <sect1><title>Virtual Master Control API</title>
+!Esound/core/vmaster.c
+!Iinclude/sound/control.h
+     </sect1>
+  </chapter>
+  <chapter><title>MIDI API</title>
+     <sect1><title>Raw MIDI API</title>
+!Esound/core/rawmidi.c
+     </sect1>
+     <sect1><title>MPU401-UART API</title>
+!Esound/drivers/mpu401/mpu401_uart.c
+     </sect1>
+  </chapter>
+  <chapter><title>Proc Info API</title>
+     <sect1><title>Proc Info Interface</title>
+!Esound/core/info.c
+     </sect1>
+  </chapter>
+  <chapter><title>Miscellaneous Functions</title>
+     <sect1><title>Hardware-Dependent Devices API</title>
+!Esound/core/hwdep.c
+     </sect1>
+     <sect1><title>Jack Abstraction Layer API</title>
+!Esound/core/jack.c
+     </sect1>
+     <sect1><title>ISA DMA Helpers</title>
+!Esound/core/isadma.c
+     </sect1>
+     <sect1><title>Other Helper Macros</title>
+!Iinclude/sound/core.h
+     </sect1>
+  </chapter>
+
+</book>
diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
index 52e1b79ce0e6..8f6e3b2403c7 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -42,6 +42,13 @@ GPL version 2.
 
 <revhistory>
 	<revision>
+	<revnumber>0.8</revnumber>
+	<date>2008-12-24</date>
+	<authorinitials>hjk</authorinitials>
+	<revremark>Added name attributes in mem and portio sysfs directories.
+		</revremark>
+	</revision>
+	<revision>
 	<revnumber>0.7</revnumber>
 	<date>2008-12-23</date>
 	<authorinitials>hjk</authorinitials>
@@ -303,12 +310,19 @@ interested in translating it, please email me
 	appear if the size of the mapping is not 0.
 </para>
 <para>
-	Each <filename>mapX/</filename> directory contains two read-only files
-	that show start address and size of the memory:
+	Each <filename>mapX/</filename> directory contains four read-only files
+	that show attributes of the memory:
 </para>
 <itemizedlist>
 <listitem>
 	<para>
+	<filename>name</filename>: A string identifier for this mapping. This
+	is optional, the string can be empty. Drivers can set this to make it
+	easier for userspace to find the correct mapping.
+	</para>
+</listitem>
+<listitem>
+	<para>
 	<filename>addr</filename>: The address of memory that can be mapped.
 	</para>
 </listitem>
@@ -366,12 +380,19 @@ offset = N * getpagesize();
 	<filename>/sys/class/uio/uioX/portio/</filename>.
 </para>
 <para>
-	Each <filename>portX/</filename> directory contains three read-only
-	files that show start, size, and type of the port region:
+	Each <filename>portX/</filename> directory contains four read-only
+	files that show name, start, size, and type of the port region:
 </para>
 <itemizedlist>
 <listitem>
 	<para>
+	<filename>name</filename>: A string identifier for this port region.
+	The string is optional and can be empty. Drivers can set it to make it
+	easier for userspace to find a certain port region.
+	</para>
+</listitem>
+<listitem>
+	<para>
 	<filename>start</filename>: The first port of this region.
 	</para>
 </listitem>
diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
new file mode 100644
index 000000000000..46b08fef3744
--- /dev/null
+++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -0,0 +1,6216 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<!-- ****************************************************** -->
+<!-- Header  -->
+<!-- ****************************************************** -->
+<book id="Writing-an-ALSA-Driver">
+  <bookinfo>
+    <title>Writing an ALSA Driver</title>
+    <author>
+      <firstname>Takashi</firstname>
+      <surname>Iwai</surname>
+      <affiliation>
+        <address>
+          <email>tiwai@suse.de</email>
+        </address>
+      </affiliation>
+     </author>
+
+     <date>Oct 15, 2007</date>
+     <edition>0.3.7</edition>
+
+    <abstract>
+      <para>
+        This document describes how to write an ALSA (Advanced Linux
+        Sound Architecture) driver.
+      </para>
+    </abstract>
+
+    <legalnotice>
+    <para>
+    Copyright (c) 2002-2005  Takashi Iwai <email>tiwai@suse.de</email>
+    </para>
+
+    <para>
+    This document is free; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version. 
+    </para>
+
+    <para>
+    This document is distributed in the hope that it will be useful,
+    but <emphasis>WITHOUT ANY WARRANTY</emphasis>; without even the
+    implied warranty of <emphasis>MERCHANTABILITY or FITNESS FOR A
+    PARTICULAR PURPOSE</emphasis>. See the GNU General Public License
+    for more details.
+    </para>
+
+    <para>
+    You should have received a copy of the GNU General Public
+    License along with this program; if not, write to the Free
+    Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    MA 02111-1307 USA
+    </para>
+    </legalnotice>
+
+  </bookinfo>
+
+<!-- ****************************************************** -->
+<!-- Preface  -->
+<!-- ****************************************************** -->
+  <preface id="preface">
+    <title>Preface</title>
+    <para>
+      This document describes how to write an
+      <ulink url="http://www.alsa-project.org/"><citetitle>
+      ALSA (Advanced Linux Sound Architecture)</citetitle></ulink>
+      driver. The document focuses mainly on PCI soundcards.
+      In the case of other device types, the API might
+      be different, too. However, at least the ALSA kernel API is
+      consistent, and therefore it would be still a bit help for
+      writing them.
+    </para>
+
+    <para>
+    This document targets people who already have enough
+    C language skills and have basic linux kernel programming
+    knowledge.  This document doesn't explain the general
+    topic of linux kernel coding and doesn't cover low-level
+    driver implementation details. It only describes
+    the standard way to write a PCI sound driver on ALSA.
+    </para>
+
+    <para>
+      If you are already familiar with the older ALSA ver.0.5.x API, you
+    can check the drivers such as <filename>sound/pci/es1938.c</filename> or
+    <filename>sound/pci/maestro3.c</filename> which have also almost the same
+    code-base in the ALSA 0.5.x tree, so you can compare the differences.
+    </para>
+
+    <para>
+      This document is still a draft version. Any feedback and
+    corrections, please!!
+    </para>
+  </preface>
+
+
+<!-- ****************************************************** -->
+<!-- File Tree Structure  -->
+<!-- ****************************************************** -->
+  <chapter id="file-tree">
+    <title>File Tree Structure</title>
+
+    <section id="file-tree-general">
+      <title>General</title>
+      <para>
+        The ALSA drivers are provided in two ways.
+      </para>
+
+      <para>
+        One is the trees provided as a tarball or via cvs from the
+      ALSA's ftp site, and another is the 2.6 (or later) Linux kernel
+      tree. To synchronize both, the ALSA driver tree is split into
+      two different trees: alsa-kernel and alsa-driver. The former
+      contains purely the source code for the Linux 2.6 (or later)
+      tree. This tree is designed only for compilation on 2.6 or
+      later environment. The latter, alsa-driver, contains many subtle
+      files for compiling ALSA drivers outside of the Linux kernel tree,
+      wrapper functions for older 2.2 and 2.4 kernels, to adapt the latest kernel API,
+      and additional drivers which are still in development or in
+      tests.  The drivers in alsa-driver tree will be moved to
+      alsa-kernel (and eventually to the 2.6 kernel tree) when they are
+      finished and confirmed to work fine.
+      </para>
+
+      <para>
+        The file tree structure of ALSA driver is depicted below. Both
+        alsa-kernel and alsa-driver have almost the same file
+        structure, except for <quote>core</quote> directory. It's
+        named as <quote>acore</quote> in alsa-driver tree. 
+
+        <example>
+          <title>ALSA File Tree Structure</title>
+          <literallayout>
+        sound
+                /core
+                        /oss
+                        /seq
+                                /oss
+                                /instr
+                /ioctl32
+                /include
+                /drivers
+                        /mpu401
+                        /opl3
+                /i2c
+                        /l3
+                /synth
+                        /emux
+                /pci
+                        /(cards)
+                /isa
+                        /(cards)
+                /arm
+                /ppc
+                /sparc
+                /usb
+                /pcmcia /(cards)
+                /oss
+          </literallayout>
+        </example>
+      </para>
+    </section>
+
+    <section id="file-tree-core-directory">
+      <title>core directory</title>
+      <para>
+        This directory contains the middle layer which is the heart
+      of ALSA drivers. In this directory, the native ALSA modules are
+      stored. The sub-directories contain different modules and are
+      dependent upon the kernel config. 
+      </para>
+
+      <section id="file-tree-core-directory-oss">
+        <title>core/oss</title>
+
+        <para>
+          The codes for PCM and mixer OSS emulation modules are stored
+        in this directory. The rawmidi OSS emulation is included in
+        the ALSA rawmidi code since it's quite small. The sequencer
+        code is stored in <filename>core/seq/oss</filename> directory (see
+        <link linkend="file-tree-core-directory-seq-oss"><citetitle>
+        below</citetitle></link>).
+        </para>
+      </section>
+
+      <section id="file-tree-core-directory-ioctl32">
+        <title>core/ioctl32</title>
+
+        <para>
+          This directory contains the 32bit-ioctl wrappers for 64bit
+        architectures such like x86-64, ppc64 and sparc64. For 32bit
+        and alpha architectures, these are not compiled. 
+        </para>
+      </section>
+
+      <section id="file-tree-core-directory-seq">
+        <title>core/seq</title>
+        <para>
+          This directory and its sub-directories are for the ALSA
+        sequencer. This directory contains the sequencer core and
+        primary sequencer modules such like snd-seq-midi,
+        snd-seq-virmidi, etc. They are compiled only when
+        <constant>CONFIG_SND_SEQUENCER</constant> is set in the kernel
+        config. 
+        </para>
+      </section>
+
+      <section id="file-tree-core-directory-seq-oss">
+        <title>core/seq/oss</title>
+        <para>
+          This contains the OSS sequencer emulation codes.
+        </para>
+      </section>
+
+      <section id="file-tree-core-directory-deq-instr">
+        <title>core/seq/instr</title>
+        <para>
+          This directory contains the modules for the sequencer
+        instrument layer. 
+        </para>
+      </section>
+    </section>
+
+    <section id="file-tree-include-directory">
+      <title>include directory</title>
+      <para>
+        This is the place for the public header files of ALSA drivers,
+      which are to be exported to user-space, or included by
+      several files at different directories. Basically, the private
+      header files should not be placed in this directory, but you may
+      still find files there, due to historical reasons :) 
+      </para>
+    </section>
+
+    <section id="file-tree-drivers-directory">
+      <title>drivers directory</title>
+      <para>
+        This directory contains code shared among different drivers
+      on different architectures.  They are hence supposed not to be
+      architecture-specific.
+      For example, the dummy pcm driver and the serial MIDI
+      driver are found in this directory. In the sub-directories,
+      there is code for components which are independent from
+      bus and cpu architectures. 
+      </para>
+
+      <section id="file-tree-drivers-directory-mpu401">
+        <title>drivers/mpu401</title>
+        <para>
+          The MPU401 and MPU401-UART modules are stored here.
+        </para>
+      </section>
+
+      <section id="file-tree-drivers-directory-opl3">
+        <title>drivers/opl3 and opl4</title>
+        <para>
+          The OPL3 and OPL4 FM-synth stuff is found here.
+        </para>
+      </section>
+    </section>
+
+    <section id="file-tree-i2c-directory">
+      <title>i2c directory</title>
+      <para>
+        This contains the ALSA i2c components.
+      </para>
+
+      <para>
+        Although there is a standard i2c layer on Linux, ALSA has its
+      own i2c code for some cards, because the soundcard needs only a
+      simple operation and the standard i2c API is too complicated for
+      such a purpose. 
+      </para>
+
+      <section id="file-tree-i2c-directory-l3">
+        <title>i2c/l3</title>
+        <para>
+          This is a sub-directory for ARM L3 i2c.
+        </para>
+      </section>
+    </section>
+
+    <section id="file-tree-synth-directory">
+        <title>synth directory</title>
+        <para>
+          This contains the synth middle-level modules.
+        </para>
+
+        <para>
+          So far, there is only Emu8000/Emu10k1 synth driver under
+        the <filename>synth/emux</filename> sub-directory. 
+        </para>
+    </section>
+
+    <section id="file-tree-pci-directory">
+      <title>pci directory</title>
+      <para>
+        This directory and its sub-directories hold the top-level card modules
+      for PCI soundcards and the code specific to the PCI BUS.
+      </para>
+
+      <para>
+        The drivers compiled from a single file are stored directly
+      in the pci directory, while the drivers with several source files are
+      stored on their own sub-directory (e.g. emu10k1, ice1712). 
+      </para>
+    </section>
+
+    <section id="file-tree-isa-directory">
+      <title>isa directory</title>
+      <para>
+        This directory and its sub-directories hold the top-level card modules
+      for ISA soundcards. 
+      </para>
+    </section>
+
+    <section id="file-tree-arm-ppc-sparc-directories">
+      <title>arm, ppc, and sparc directories</title>
+      <para>
+        They are used for top-level card modules which are
+      specific to one of these architectures. 
+      </para>
+    </section>
+
+    <section id="file-tree-usb-directory">
+      <title>usb directory</title>
+      <para>
+        This directory contains the USB-audio driver. In the latest version, the
+      USB MIDI driver is integrated in the usb-audio driver. 
+      </para>
+    </section>
+
+    <section id="file-tree-pcmcia-directory">
+      <title>pcmcia directory</title>
+      <para>
+        The PCMCIA, especially PCCard drivers will go here. CardBus
+      drivers will be in the pci directory, because their API is identical
+      to that of standard PCI cards. 
+      </para>
+    </section>
+
+    <section id="file-tree-oss-directory">
+      <title>oss directory</title>
+      <para>
+        The OSS/Lite source files are stored here in Linux 2.6 (or
+      later) tree. In the ALSA driver tarball, this directory is empty,
+      of course :) 
+      </para>
+    </section>
+  </chapter>
+
+
+<!-- ****************************************************** -->
+<!-- Basic Flow for PCI Drivers  -->
+<!-- ****************************************************** -->
+  <chapter id="basic-flow">
+    <title>Basic Flow for PCI Drivers</title>
+
+    <section id="basic-flow-outline">
+      <title>Outline</title>
+      <para>
+        The minimum flow for PCI soundcards is as follows:
+
+        <itemizedlist>
+          <listitem><para>define the PCI ID table (see the section
+          <link linkend="pci-resource-entries"><citetitle>PCI Entries
+          </citetitle></link>).</para></listitem> 
+          <listitem><para>create <function>probe()</function> callback.</para></listitem>
+          <listitem><para>create <function>remove()</function> callback.</para></listitem>
+          <listitem><para>create a <structname>pci_driver</structname> structure
+	  containing the three pointers above.</para></listitem>
+          <listitem><para>create an <function>init()</function> function just calling
+	  the <function>pci_register_driver()</function> to register the pci_driver table
+	  defined above.</para></listitem>
+          <listitem><para>create an <function>exit()</function> function to call
+	  the <function>pci_unregister_driver()</function> function.</para></listitem>
+        </itemizedlist>
+      </para>
+    </section>
+
+    <section id="basic-flow-example">
+      <title>Full Code Example</title>
+      <para>
+        The code example is shown below. Some parts are kept
+      unimplemented at this moment but will be filled in the
+      next sections. The numbers in the comment lines of the
+      <function>snd_mychip_probe()</function> function
+      refer to details explained in the following section. 
+
+        <example>
+          <title>Basic Flow for PCI Drivers - Example</title>
+          <programlisting>
+<![CDATA[
+  #include <linux/init.h>
+  #include <linux/pci.h>
+  #include <linux/slab.h>
+  #include <sound/core.h>
+  #include <sound/initval.h>
+
+  /* module parameters (see "Module Parameters") */
+  /* SNDRV_CARDS: maximum number of cards supported by this module */
+  static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+  static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+  static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+
+  /* definition of the chip-specific record */
+  struct mychip {
+          struct snd_card *card;
+          /* the rest of the implementation will be in section
+           * "PCI Resource Management"
+           */
+  };
+
+  /* chip-specific destructor
+   * (see "PCI Resource Management")
+   */
+  static int snd_mychip_free(struct mychip *chip)
+  {
+          .... /* will be implemented later... */
+  }
+
+  /* component-destructor
+   * (see "Management of Cards and Components")
+   */
+  static int snd_mychip_dev_free(struct snd_device *device)
+  {
+          return snd_mychip_free(device->device_data);
+  }
+
+  /* chip-specific constructor
+   * (see "Management of Cards and Components")
+   */
+  static int __devinit snd_mychip_create(struct snd_card *card,
+                                         struct pci_dev *pci,
+                                         struct mychip **rchip)
+  {
+          struct mychip *chip;
+          int err;
+          static struct snd_device_ops ops = {
+                 .dev_free = snd_mychip_dev_free,
+          };
+
+          *rchip = NULL;
+
+          /* check PCI availability here
+           * (see "PCI Resource Management")
+           */
+          ....
+
+          /* allocate a chip-specific data with zero filled */
+          chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+          if (chip == NULL)
+                  return -ENOMEM;
+
+          chip->card = card;
+
+          /* rest of initialization here; will be implemented
+           * later, see "PCI Resource Management"
+           */
+          ....
+
+          err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+          if (err < 0) {
+                  snd_mychip_free(chip);
+                  return err;
+          }
+
+          snd_card_set_dev(card, &pci->dev);
+
+          *rchip = chip;
+          return 0;
+  }
+
+  /* constructor -- see "Constructor" sub-section */
+  static int __devinit snd_mychip_probe(struct pci_dev *pci,
+                               const struct pci_device_id *pci_id)
+  {
+          static int dev;
+          struct snd_card *card;
+          struct mychip *chip;
+          int err;
+
+          /* (1) */
+          if (dev >= SNDRV_CARDS)
+                  return -ENODEV;
+          if (!enable[dev]) {
+                  dev++;
+                  return -ENOENT;
+          }
+
+          /* (2) */
+          err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+          if (err < 0)
+                  return err;
+
+          /* (3) */
+          err = snd_mychip_create(card, pci, &chip);
+          if (err < 0) {
+                  snd_card_free(card);
+                  return err;
+          }
+
+          /* (4) */
+          strcpy(card->driver, "My Chip");
+          strcpy(card->shortname, "My Own Chip 123");
+          sprintf(card->longname, "%s at 0x%lx irq %i",
+                  card->shortname, chip->ioport, chip->irq);
+
+          /* (5) */
+          .... /* implemented later */
+
+          /* (6) */
+          err = snd_card_register(card);
+          if (err < 0) {
+                  snd_card_free(card);
+                  return err;
+          }
+
+          /* (7) */
+          pci_set_drvdata(pci, card);
+          dev++;
+          return 0;
+  }
+
+  /* destructor -- see the "Destructor" sub-section */
+  static void __devexit snd_mychip_remove(struct pci_dev *pci)
+  {
+          snd_card_free(pci_get_drvdata(pci));
+          pci_set_drvdata(pci, NULL);
+  }
+]]>
+          </programlisting>
+        </example>
+      </para>
+    </section>
+
+    <section id="basic-flow-constructor">
+      <title>Constructor</title>
+      <para>
+        The real constructor of PCI drivers is the <function>probe</function> callback.
+      The <function>probe</function> callback and other component-constructors which are called
+      from the <function>probe</function> callback should be defined with
+      the <parameter>__devinit</parameter> prefix. You 
+      cannot use the <parameter>__init</parameter> prefix for them,
+      because any PCI device could be a hotplug device. 
+      </para>
+
+      <para>
+        In the <function>probe</function> callback, the following scheme is often used.
+      </para>
+
+      <section id="basic-flow-constructor-device-index">
+        <title>1) Check and increment the device index.</title>
+        <para>
+          <informalexample>
+            <programlisting>
+<![CDATA[
+  static int dev;
+  ....
+  if (dev >= SNDRV_CARDS)
+          return -ENODEV;
+  if (!enable[dev]) {
+          dev++;
+          return -ENOENT;
+  }
+]]>
+            </programlisting>
+          </informalexample>
+
+        where enable[dev] is the module option.
+        </para>
+
+        <para>
+          Each time the <function>probe</function> callback is called, check the
+        availability of the device. If not available, simply increment
+        the device index and returns. dev will be incremented also
+        later (<link
+        linkend="basic-flow-constructor-set-pci"><citetitle>step
+        7</citetitle></link>). 
+        </para>
+      </section>
+
+      <section id="basic-flow-constructor-create-card">
+        <title>2) Create a card instance</title>
+        <para>
+          <informalexample>
+            <programlisting>
+<![CDATA[
+  struct snd_card *card;
+  int err;
+  ....
+  err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+]]>
+            </programlisting>
+          </informalexample>
+        </para>
+
+        <para>
+          The details will be explained in the section
+          <link linkend="card-management-card-instance"><citetitle>
+          Management of Cards and Components</citetitle></link>.
+        </para>
+      </section>
+
+      <section id="basic-flow-constructor-create-main">
+        <title>3) Create a main component</title>
+        <para>
+          In this part, the PCI resources are allocated.
+
+          <informalexample>
+            <programlisting>
+<![CDATA[
+  struct mychip *chip;
+  ....
+  err = snd_mychip_create(card, pci, &chip);
+  if (err < 0) {
+          snd_card_free(card);
+          return err;
+  }
+]]>
+            </programlisting>
+          </informalexample>
+
+          The details will be explained in the section <link
+        linkend="pci-resource"><citetitle>PCI Resource
+        Management</citetitle></link>.
+        </para>
+      </section>
+
+      <section id="basic-flow-constructor-main-component">
+        <title>4) Set the driver ID and name strings.</title>
+        <para>
+          <informalexample>
+            <programlisting>
+<![CDATA[
+  strcpy(card->driver, "My Chip");
+  strcpy(card->shortname, "My Own Chip 123");
+  sprintf(card->longname, "%s at 0x%lx irq %i",
+          card->shortname, chip->ioport, chip->irq);
+]]>
+            </programlisting>
+          </informalexample>
+
+          The driver field holds the minimal ID string of the
+        chip. This is used by alsa-lib's configurator, so keep it
+        simple but unique. 
+          Even the same driver can have different driver IDs to
+        distinguish the functionality of each chip type. 
+        </para>
+
+        <para>
+          The shortname field is a string shown as more verbose
+        name. The longname field contains the information
+        shown in <filename>/proc/asound/cards</filename>. 
+        </para>
+      </section>
+
+      <section id="basic-flow-constructor-create-other">
+        <title>5) Create other components, such as mixer, MIDI, etc.</title>
+        <para>
+          Here you define the basic components such as
+          <link linkend="pcm-interface"><citetitle>PCM</citetitle></link>,
+          mixer (e.g. <link linkend="api-ac97"><citetitle>AC97</citetitle></link>),
+          MIDI (e.g. <link linkend="midi-interface"><citetitle>MPU-401</citetitle></link>),
+          and other interfaces.
+          Also, if you want a <link linkend="proc-interface"><citetitle>proc
+        file</citetitle></link>, define it here, too.
+        </para>
+      </section>
+
+      <section id="basic-flow-constructor-register-card">
+        <title>6) Register the card instance.</title>
+        <para>
+          <informalexample>
+            <programlisting>
+<![CDATA[
+  err = snd_card_register(card);
+  if (err < 0) {
+          snd_card_free(card);
+          return err;
+  }
+]]>
+            </programlisting>
+          </informalexample>
+        </para>
+
+        <para>
+          Will be explained in the section <link
+        linkend="card-management-registration"><citetitle>Management
+        of Cards and Components</citetitle></link>, too. 
+        </para>
+      </section>
+
+      <section id="basic-flow-constructor-set-pci">
+        <title>7) Set the PCI driver data and return zero.</title>
+        <para>
+          <informalexample>
+            <programlisting>
+<![CDATA[
+        pci_set_drvdata(pci, card);
+        dev++;
+        return 0;
+]]>
+            </programlisting>
+          </informalexample>
+
+          In the above, the card record is stored. This pointer is
+        used in the remove callback and power-management
+        callbacks, too. 
+        </para>
+      </section>
+    </section>
+
+    <section id="basic-flow-destructor">
+      <title>Destructor</title>
+      <para>
+        The destructor, remove callback, simply releases the card
+      instance. Then the ALSA middle layer will release all the
+      attached components automatically. 
+      </para>
+
+      <para>
+        It would be typically like the following:
+
+        <informalexample>
+          <programlisting>
+<![CDATA[
+  static void __devexit snd_mychip_remove(struct pci_dev *pci)
+  {
+          snd_card_free(pci_get_drvdata(pci));
+          pci_set_drvdata(pci, NULL);
+  }
+]]>
+          </programlisting>
+        </informalexample>
+
+        The above code assumes that the card pointer is set to the PCI
+	driver data.
+      </para>
+    </section>
+
+    <section id="basic-flow-header-files">
+      <title>Header Files</title>
+      <para>
+        For the above example, at least the following include files
+      are necessary. 
+
+        <informalexample>
+          <programlisting>
+<![CDATA[
+  #include <linux/init.h>
+  #include <linux/pci.h>
+  #include <linux/slab.h>
+  #include <sound/core.h>
+  #include <sound/initval.h>
+]]>
+          </programlisting>
+        </informalexample>
+
+	where the last one is necessary only when module options are