powerpc: Remove platforms/wsp and associated pieces

__attribute__ ((unused))

WSP is the last user of CONFIG_PPC_A2, so we remove that as well.

Although CONFIG_PPC_ICSWX still exists, it's no longer selectable for
any Book3E platform, so we can remove the code in mmu-book3e.h that
depended on it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

32 files changed, 1 insertions, 4250 deletions

diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 21c9f304e96c..790352f93700 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -235,11 +235,6 @@ config PPC_EARLY_DEBUG_USBGECKO
 	  Select this to enable early debugging for Nintendo GameCube/Wii
 	  consoles via an external USB Gecko adapter.
 
-config PPC_EARLY_DEBUG_WSP
-	bool "Early debugging via WSP's internal UART"
-	depends on PPC_WSP
-	select PPC_UDBG_16550
-
 config PPC_EARLY_DEBUG_PS3GELIC
 	bool "Early debugging through the PS3 Ethernet port"
 	depends on PPC_PS3
diff --git a/arch/powerpc/configs/chroma_defconfig b/arch/powerpc/configs/chroma_defconfig
deleted file mode 100644
index 4f35fc462385..000000000000
--- a/arch/powerpc/configs/chroma_defconfig
+++ /dev/null
@@ -1,307 +0,0 @@
-CONFIG_PPC64=y
-CONFIG_PPC_BOOK3E_64=y
-# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=256
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=19
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_CGROUP_MEMCG_SWAP=y
-CONFIG_NAMESPACES=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_SCOM_DEBUGFS=y
-CONFIG_PPC_A2_DD2=y
-CONFIG_KVM_GUEST=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_MISC=y
-CONFIG_NUMA=y
-# CONFIG_MIGRATION is not set
-CONFIG_PPC_64K_PAGES=y
-CONFIG_SCHED_SMT=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE=""
-# CONFIG_SECCOMP is not set
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_PCI_MSI=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_XFRM_SUB_POLICY=y
-CONFIG_XFRM_STATISTICS=y
-CONFIG_NET_KEY=m
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
-CONFIG_IPV6_TUNNEL=y
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_IPV6_MROUTE=y
-CONFIG_IPV6_PIMSM_V2=y
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NET_TCPPROBE=y
-# CONFIG_WIRELESS is not set
-CONFIG_NET_9P=y
-CONFIG_NET_9P_DEBUG=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_MISC_DEVICES=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
-CONFIG_SCSI_SRP_ATTRS=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_SIL24=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_SIL=y
-CONFIG_PATA_CMD64X=y
-CONFIG_PATA_MARVELL=y
-CONFIG_PATA_SIL680=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=y
-CONFIG_DM_MIRROR=y
-CONFIG_DM_ZERO=y
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_TUN=y
-CONFIG_E1000E=y
-CONFIG_TIGON3=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=1024
-# CONFIG_HWMON is not set
-# CONFIG_VGA_ARB is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1511=y
-CONFIG_RTC_DRV_DS1553=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_FUSE_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=m
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_FTRACE_SYSCALLS=y
-CONFIG_PPC_EMULATED_STATS=y
-CONFIG_XMON=y
-CONFIG_XMON_DEFAULT=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_PPC_EARLY_DEBUG=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_VIRTUALIZATION=y
diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 901dac6b6cb7..d0918e09557f 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -223,10 +223,6 @@ typedef struct {
 	unsigned int	id;
 	unsigned int	active;
 	unsigned long	vdso_base;
-#ifdef CONFIG_PPC_ICSWX
-	struct spinlock *cop_lockp;	/* guard cop related stuff */
-	unsigned long acop;		/* mask of enabled coprocessor types */
-#endif /* CONFIG_PPC_ICSWX */
 #ifdef CONFIG_PPC_MM_SLICES
 	u64 low_slices_psize;   /* SLB page size encodings */
 	u64 high_slices_psize;  /* 4 bits per slice for now */
diff --git a/arch/powerpc/include/asm/reg_a2.h b/arch/powerpc/include/asm/reg_a2.h
index 3d52a1132f3d..3ba9c6f096fc 100644
--- a/arch/powerpc/include/asm/reg_a2.h
+++ b/arch/powerpc/include/asm/reg_a2.h
@@ -110,15 +110,6 @@
 #define TLB1_UR			ASM_CONST(0x0000000000000002)
 #define TLB1_SR			ASM_CONST(0x0000000000000001)
 
-#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
-#define WSP_UART_PHYS	0xffc000c000
-/* This needs to be careful chosen to hit a !0 congruence class
- * in the TLB since we bolt it in way 3, which is already occupied
- * by our linear mapping primary bolted entry in CC 0.
- */
-#define WSP_UART_VIRT	0xf000000000001000
-#endif
-
 /* A2 erativax attributes definitions */
 #define ERATIVAX_RS_IS_ALL		0x000
 #define ERATIVAX_RS_IS_TID		0x040
diff --git a/arch/powerpc/include/asm/wsp.h b/arch/powerpc/include/asm/wsp.h
deleted file mode 100644
index c7dc83088a33..000000000000
--- a/arch/powerpc/include/asm/wsp.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- *  Copyright 2011 Michael Ellerman, IBM Corp.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-#ifndef __ASM_POWERPC_WSP_H
-#define __ASM_POWERPC_WSP_H
-
-extern int wsp_get_chip_id(struct device_node *dn);
-
-#endif /* __ASM_POWERPC_WSP_H */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index fab19ec25597..670c312d914e 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -43,7 +43,6 @@ obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_power.o
 obj-$(CONFIG_PPC_BOOK3S_64)	+= mce.o mce_power.o
 obj64-$(CONFIG_RELOCATABLE)	+= reloc_64.o
 obj-$(CONFIG_PPC_BOOK3E_64)	+= exceptions-64e.o idle_book3e.o
-obj-$(CONFIG_PPC_A2)		+= cpu_setup_a2.o
 obj-$(CONFIG_PPC64)		+= vdso64/
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o
 obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
diff --git a/arch/powerpc/kernel/cpu_setup_a2.S b/arch/powerpc/kernel/cpu_setup_a2.S
deleted file mode 100644
index 61f079e05b61..000000000000
--- a/arch/powerpc/kernel/cpu_setup_a2.S
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- *  A2 specific assembly support code
- *
- *  Copyright 2009 Ben Herrenschmidt, IBM Corp.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <asm/asm-offsets.h>
-#include <asm/ppc_asm.h>
-#include <asm/ppc-opcode.h>
-#include <asm/processor.h>
-#include <asm/reg_a2.h>
-#include <asm/reg.h>
-#include <asm/thread_info.h>
-
-/*
- * Disable thdid and class fields in ERATs to bump PID to full 14 bits capacity.
- * This also prevents external LPID accesses but that isn't a problem when not a
- * guest. Under PV, this setting will be ignored and MMUCR will return the right
- * number of PID bits we can use.
- */
-#define MMUCR1_EXTEND_PID \
-	(MMUCR1_ICTID | MMUCR1_ITTID | MMUCR1_DCTID | \
-	 MMUCR1_DTTID | MMUCR1_DCCD)
-
-/*
- * Use extended PIDs if enabled.
- * Don't clear the ERATs on context sync events and enable I & D LRU.
- * Enable ERAT back invalidate when tlbwe overwrites an entry.
- */
-#define INITIAL_MMUCR1 \
-	(MMUCR1_EXTEND_PID | MMUCR1_CSINV_NEVER | MMUCR1_IRRE | \
-	 MMUCR1_DRRE | MMUCR1_TLBWE_BINV)
-
-_GLOBAL(__setup_cpu_a2)
-	/* Some of these are actually thread local and some are
-	 * core local but doing it always won't hurt
-	 */
-
-#ifdef CONFIG_PPC_ICSWX
-	/* Make sure ACOP starts out as zero */
-	li	r3,0
-	mtspr   SPRN_ACOP,r3
-
-	/* Skip the following if we are in Guest mode */
-	mfmsr	r3
-	andis.	r0,r3,MSR_GS@h
-	bne	_icswx_skip_guest
-
-	/* Enable icswx instruction */
-	mfspr   r3,SPRN_A2_CCR2
-	ori     r3,r3,A2_CCR2_ENABLE_ICSWX
-	mtspr   SPRN_A2_CCR2,r3
-
-	/* Unmask all CTs in HACOP */
-	li      r3,-1
-	mtspr   SPRN_HACOP,r3
-_icswx_skip_guest:
-#endif /* CONFIG_PPC_ICSWX */
-
-	/* Enable doorbell */
-	mfspr   r3,SPRN_A2_CCR2
-	oris     r3,r3,A2_CCR2_ENABLE_PC@h
-	mtspr   SPRN_A2_CCR2,r3
-	isync
-
-	/* Setup CCR0 to disable power saving for now as it's busted
-	 * in the current implementations. Setup CCR1 to wake on
-	 * interrupts normally (we write the default value but who
-	 * knows what FW may have clobbered...)
-	 */
-	li	r3,0
-	mtspr	SPRN_A2_CCR0, r3
-	LOAD_REG_IMMEDIATE(r3,0x0f0f0f0f)
-	mtspr	SPRN_A2_CCR1, r3
-
-	/* Initialise MMUCR1 */
-	lis	r3,INITIAL_MMUCR1@h
-	ori	r3,r3,INITIAL_MMUCR1@l
-	mtspr	SPRN_MMUCR1,r3
-
-	/* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */
-	LOAD_REG_IMMEDIATE(r3, 0x000a7531)
-	mtspr	SPRN_MMUCR2,r3
-
-	/* Set MMUCR3 to write all thids bit to the TLB */
-	LOAD_REG_IMMEDIATE(r3, 0x0000000f)
-	mtspr	SPRN_MMUCR3,r3
-
-	/* Don't do ERAT stuff if running guest mode */
-	mfmsr	r3
-	andis.	r0,r3,MSR_GS@h
-	bne	1f
-
-	/* Now set the I-ERAT watermark to 15 */
-	lis	r4,(MMUCR0_TLBSEL_I|MMUCR0_ECL)@h
-	mtspr	SPRN_MMUCR0, r4
-	li	r4,A2_IERAT_SIZE-1
-	PPC_ERATWE(R4,R4,3)
-
-	/* Now set the D-ERAT watermark to 31 */
-	lis	r4,(MMUCR0_TLBSEL_D|MMUCR0_ECL)@h
-	mtspr	SPRN_MMUCR0, r4
-	li	r4,A2_DERAT_SIZE-1
-	PPC_ERATWE(R4,R4,3)
-
-	/* And invalidate the beast just in case. That won't get rid of
-	 * a bolted entry though it will be in LRU and so will go away eventually
-	 * but let's not bother for now
-	 */
-	PPC_ERATILX(0,0,R0)
-1:
-	blr
-
-_GLOBAL(__restore_cpu_a2)
-	b	__setup_cpu_a2
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 11da04a4625a..965291b4c2fa 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -2149,44 +2149,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 	}
 #endif /* CONFIG_PPC32 */
 #endif /* CONFIG_E500 */
-
-#ifdef CONFIG_PPC_A2
-	{	/* Standard A2 (>= DD2) + FPU core */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00480000,
-		.cpu_name		= "A2 (>= DD2)",
-		.cpu_features		= CPU_FTRS_A2,
-		.cpu_user_features	= COMMON_USER_PPC64,
-		.mmu_features		= MMU_FTRS_A2,
-		.icache_bsize		= 64,
-		.dcache_bsize		= 64,
-		.num_pmcs		= 0,
-		.cpu_setup		= __setup_cpu_a2,
-		.cpu_restore		= __restore_cpu_a2,
-		.machine_check		= machine_check_generic,
-		.platform		= "ppca2",
-	},
-	{	/* This is a default entry to get going, to be replaced by
-		 * a real one at some stage
-		 */
-#define CPU_FTRS_BASE_BOOK3E	(CPU_FTR_USE_TB | \
-	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \
-	    CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
-		.pvr_mask		= 0x00000000,
-		.pvr_value		= 0x00000000,
-		.cpu_name		= "Book3E",
-		.cpu_features		= CPU_FTRS_BASE_BOOK3E,
-		.cpu_user_features	= COMMON_USER_PPC64,
-		.mmu_features		= MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX |
-					  MMU_FTR_USE_TLBIVAX_BCAST |
-					  MMU_FTR_LOCK_BCAST_INVAL,
-		.icache_bsize		= 64,
-		.dcache_bsize		= 64,
-		.num_pmcs		= 0,
-		.machine_check		= machine_check_generic,
-		.platform		= "power6",
-	},
-#endif /* CONFIG_PPC_A2 */
 };
 
 static struct cpu_spec the_cpu_spec;
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 771b4e92e5d9..bb9cac6c8051 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -1467,22 +1467,6 @@ a2_tlbinit_after_linear_map:
 	.globl  a2_tlbinit_after_iprot_flush
 a2_tlbinit_after_iprot_flush:
 
-#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
-	/* Now establish early debug mappings if applicable */
-	/* Restore the MAS0 we used for linear mapping load */
-	mtspr	SPRN_MAS0,r11
-
-	lis	r3,(MAS1_VALID | MAS1_IPROT)@h
-	ori	r3,r3,(BOOK3E_PAGESZ_4K << MAS1_TSIZE_SHIFT)
-	mtspr	SPRN_MAS1,r3
-	LOAD_REG_IMMEDIATE(r3, WSP_UART_VIRT | MAS2_I | MAS2_G)
-	mtspr	SPRN_MAS2,r3
-	LOAD_REG_IMMEDIATE(r3, WSP_UART_PHYS | MAS3_SR | MAS3_SW)
-	mtspr	SPRN_MAS7_MAS3,r3
-	/* re-use the MAS8 value from the linear mapping */
-	tlbwe
-#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
-
 	PPC_TLBILX(0,0,R0)
 	sync
 	isync
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index a15837519dca..b7aa07279a63 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -62,8 +62,6 @@ void __init udbg_early_init(void)
 	udbg_init_cpm();
 #elif defined(CONFIG_PPC_EARLY_DEBUG_USBGECKO)
 	udbg_init_usbgecko();
-#elif defined(CONFIG_PPC_EARLY_DEBUG_WSP)
-	udbg_init_wsp();
 #elif defined(CONFIG_PPC_EARLY_DEBUG_MEMCONS)
 	/* In memory console */
 	udbg_init_memcons();
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 75702e207b29..6e7c4923b5ea 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -296,14 +296,3 @@ void __init udbg_init_40x_realmode(void)
 }
 
 #endif /* CONFIG_PPC_EARLY_DEBUG_40x */
-
-
-#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
-
-void __init udbg_init_wsp(void)
-{
-	udbg_uart_init_mmio((void *)WSP_UART_VIRT, 1);
-	udbg_uart_setup(57600, 50000000);
-}
-
-#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index bf9c6d4cd26c..391b3f6b54a3 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -19,7 +19,6 @@ source "arch/powerpc/platforms/embedded6xx/Kconfig"
 source "arch/powerpc/platforms/44x/Kconfig"
 source "arch/powerpc/platforms/40x/Kconfig"
 source "arch/powerpc/platforms/amigaone/Kconfig"
-source "arch/powerpc/platforms/wsp/Kconfig"
 
 config KVM_GUEST
 	bool "KVM Guest support"
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 43b65ad1970a..a41bd023647a 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -148,10 +148,6 @@ config POWER4
 	depends on PPC64 && PPC_BOOK3S
 	def_bool y
 
-config PPC_A2
-	bool
-	depends on PPC_BOOK3E_64
-
 config TUNE_CELL
 	bool "Optimize for Cell Broadband Engine"
 	depends on PPC64 && PPC_BOOK3S
@@ -280,7 +276,7 @@ config VSX
 
 config PPC_ICSWX
 	bool "Support for PowerPC icswx coprocessor instruction"
-	depends on POWER4 || PPC_A2
+	depends on POWER4
 	default n
 	---help---
 
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 879b4a448498..469ef170d218 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -22,4 +22,3 @@ obj-$(CONFIG_PPC_CELL)		+= cell/
 obj-$(CONFIG_PPC_PS3)		+= ps3/
 obj-$(CONFIG_EMBEDDED6xx)	+= embedded6xx/
 obj-$(CONFIG_AMIGAONE)		+= amigaone/
-obj-$(CONFIG_PPC_WSP)		+= wsp/
diff --git a/arch/powerpc/platforms/wsp/Kconfig b/arch/powerpc/platforms/wsp/Kconfig
deleted file mode 100644
index 422a175b10ee..000000000000
--- a/arch/powerpc/platforms/wsp/Kconfig
+++ /dev/null
@@ -1,30 +0,0 @@
-config PPC_WSP
-	bool
-	select PPC_A2
-	select GENERIC_TBSYNC
-	select PPC_ICSWX
-	select PPC_SCOM
-	select PPC_XICS
-	select PPC_ICP_NATIVE
-	select PCI
-	select PPC_IO_WORKAROUNDS if PCI
-	select PPC_INDIRECT_PIO if PCI
-	default n
-
-menu "WSP platform selection"
-	depends on PPC_BOOK3E_64
-
-config PPC_PSR2
-	bool "PowerEN System Reference Platform 2"
-	select EPAPR_BOOT
-	select PPC_WSP
-	default y
-
-config PPC_CHROMA
-	bool "PowerEN PCIe Chroma Card"
-	select EPAPR_BOOT
-	select PPC_WSP
-	select OF_DYNAMIC
-	default y
-
-endmenu
diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile
deleted file mode 100644
index 162fc60125a2..000000000000
--- a/arch/powerpc/platforms/wsp/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-ccflags-y			+= $(NO_MINIMAL_TOC)
-
-obj-y				+= setup.o ics.o wsp.o
-obj-$(CONFIG_PPC_PSR2)		+= psr2.o
-obj-$(CONFIG_PPC_CHROMA)	+= chroma.o h8.o
-obj-$(CONFIG_PPC_WSP)		+= opb_pic.o
-obj-$(CONFIG_PPC_WSP)		+= scom_wsp.o
-obj-$(CONFIG_SMP)		+= smp.o scom_smp.o
-obj-$(CONFIG_PCI)		+= wsp_pci.o
-obj-$(CONFIG_PCI_MSI)		+= msi.o
diff --git a/arch/powerpc/platforms/wsp/chroma.c b/arch/powerpc/platforms/wsp/chroma.c
deleted file mode 100644
index aaa46b353715..000000000000
--- a/arch/powerpc/platforms/wsp/chroma.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright 2008-2011, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/of.h>
-#include <linux/smp.h>
-#include <linux/time.h>
-#include <linux/of_fdt.h>
-
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-
-#include "ics.h"
-#include "wsp.h"
-
-void __init chroma_setup_arch(void)
-{
-	wsp_setup_arch();
-	wsp_setup_h8();
-
-}
-
-static int __init chroma_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "ibm,wsp-chroma"))
-		return 0;
-
-	return 1;
-}
-
-define_machine(chroma_md) {
-	.name			= "Chroma PCIe",
-	.probe			= chroma_probe,
-	.setup_arch		= chroma_setup_arch,
-	.restart		= wsp_h8_restart,
-	.power_off		= wsp_h8_power_off,
-	.halt			= wsp_halt,
-	.calibrate_decr		= generic_calibrate_decr,
-	.init_IRQ		= wsp_setup_irq,
-	.progress		= udbg_progress,
-	.power_save		= book3e_idle,
-};
-
-machine_arch_initcall(chroma_md, wsp_probe_devices);
diff --git a/arch/powerpc/platforms/wsp/h8.c b/arch/powerpc/platforms/wsp/h8.c
deleted file mode 100644
index a3c87f395750..000000000000
--- a/arch/powerpc/platforms/wsp/h8.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright 2008-2011, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/io.h>
-#include <linux/of_address.h>
-
-#include "wsp.h"
-
-/*
- * The UART connection to the H8 is over ttyS1 which is just a 16550.
- * We assume that FW has it setup right and no one messes with it.
- */
-
-
-static u8 __iomem *h8;
-
-#define RBR 0		/* Receiver Buffer Register */
-#define THR 0		/* Transmitter Holding Register */
-#define LSR 5		/* Line Status Register */
-#define LSR_DR 0x01	/* LSR value for Data-Ready */
-#define LSR_THRE 0x20	/* LSR value for Transmitter-Holding-Register-Empty */
-static void wsp_h8_putc(int c)
-{
-	u8 lsr;
-
-	do {
-		lsr = readb(h8 + LSR);
-	} while ((lsr & LSR_THRE) != LSR_THRE);
-	writeb(c, h8 + THR);
-}
-
-static int wsp_h8_getc(void)
-{
-	u8 lsr;
-
-	do {
-		lsr = readb(h8 + LSR);
-	} while ((lsr & LSR_DR) != LSR_DR);
-
-	return readb(h8 + RBR);
-}
-
-static void wsp_h8_puts(const char *s, int sz)
-{
-	int i;
-
-	for (i = 0; i < sz; i++) {
-		wsp_h8_putc(s[i]);
-
-		/* no flow control so wait for echo */
-		wsp_h8_getc();
-	}
-	wsp_h8_putc('\r');
-	wsp_h8_putc('\n');
-}
-
-static void wsp_h8_terminal_cmd(const char *cmd, int sz)
-{
-	hard_irq_disable();
-	wsp_h8_puts(cmd, sz);
-	/* should never return, but just in case */
-	for (;;)
-		continue;
-}
-
-
-void wsp_h8_restart(char *cmd)
-{
-	static const char restart[] = "warm-reset";
-
-	(void)cmd;
-	wsp_h8_terminal_cmd(restart, sizeof(restart) - 1);
-}
-
-void wsp_h8_power_off(void)
-{
-	static const char off[] = "power-off";
-
-	wsp_h8_terminal_cmd(off, sizeof(off) - 1);
-}
-
-static void __iomem *wsp_h8_getaddr(void)
-{
-	struct device_node *aliases;
-	struct device_node *uart;
-	struct property *path;
-	void __iomem *va = NULL;
-
-	/*
-	 * there is nothing in the devtree to tell us which is mapped
-	 * to the H8, but se know it is the second serial port.
-	 */
-
-	aliases = of_find_node_by_path("/aliases");
-	if (aliases == NULL)
-		return NULL;
-
-	path = of_find_property(aliases, "serial1", NULL);
-	if (path == NULL)
-		goto out;
-
-	uart = of_find_node_by_path(path->value);
-	if (uart == NULL)
-		goto out;
-
-	va = of_iomap(uart, 0);
-
-	/* remove it so no one messes with it */
-	of_detach_node(uart);
-	of_node_put(uart);
-
-o