Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  Input: use full RCU API
  Input: remove tsdev interface
  Input: add support for Blackfin BF54x Keypad controller
  Input: appletouch - another fix for idle reset logic
  HWMON: hdaps - switch to using input-polldev
  Input: add support for SEGA Dreamcast keyboard
  Input: omap-keyboard - don't pretend we support changing keymap
  Input: lifebook - fix X and Y axis range
  Input: usbtouchscreen - add support for GeneralTouch devices
  Input: fix open count handling in input interfaces
  Input: keyboard - add CapsShift lock
  Input: adbhid - produce all CapsLock key events
  Input: ALPS - add signature for ThinkPad R61
  Input: jornada720_kbd - send MSC_SCAN events
  Input: add support for the HP Jornada 7xx (710/720/728) touchscreen
  Input: add support for HP Jornada 7xx onboard keyboard
  Input: add support for HP Jornada onboard keyboard (HP6XX)
  Input: ucb1400_ts - use schedule_timeout_uninterruptible
  Input: xpad - fix dependancy on LEDS class
  Input: auto-select INPUT for MAC_EMUMOUSEBTN option
  ...

Resolved conflicts manually in drivers/hwmon/applesmc.c: converting from
a class device to a device and converting to use input-polldev created a
few apparently trivial clashes..

42 files changed, 3774 insertions, 2174 deletions

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 63df2262d41a..fb8258ebc577 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -205,20 +205,6 @@ Who:	Len Brown <len.brown@intel.com>
 
 ---------------------------
 
-What:	Compaq touchscreen device emulation
-When:	Oct 2007
-Files:	drivers/input/tsdev.c
-Why:	The code says it was obsolete when it was written in 2001.
-	tslib is a userspace library which does anything tsdev can do and
-	much more besides in userspace where this code belongs. There is no
-	longer any need for tsdev and applications should have converted to
-	use tslib by now.
-	The name "tsdev" is also extremely confusing and lots of people have
-	it loaded when they don't need/use it.
-Who:	Richard Purdie <rpurdie@rpsys.net>
-
----------------------------
-
 What:	i2c-ixp2000, i2c-ixp4xx and scx200_i2c drivers
 When:	September 2007
 Why:	Obsolete. The new i2c-gpio driver replaces all hardware-specific
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index fdd6dbcf864e..085e4a095eaa 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1890,9 +1890,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format:
 			<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
 
-	tsdev.xres=	[TS] Horizontal screen resolution.
-	tsdev.yres=	[TS] Vertical screen resolution.
-
 	turbografx.map[2|3]=	[HW,JOY]
 			TurboGraFX parallel port interface
 			Format:
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 2c47db494f7d..046e6d84bbfc 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -88,7 +88,7 @@ static struct platform_device bf54x_lq043_device = {
 #endif
 
 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
-static int bf548_keymap[] = {
+static const unsigned int bf548_keymap[] = {
 	KEYVAL(0, 0, KEY_ENTER),
 	KEYVAL(0, 1, KEY_HELP),
 	KEYVAL(0, 2, KEY_0),
@@ -110,8 +110,8 @@ static int bf548_keymap[] = {
 static struct bfin_kpad_platform_data bf54x_kpad_data = {
 	.rows			= 4,
 	.cols			= 4,
-	.keymap 		= bf548_keymap,
-	.keymapsize 		= ARRAY_SIZE(bf548_keymap),
+	.keymap			= bf548_keymap,
+	.keymapsize		= ARRAY_SIZE(bf548_keymap),
 	.repeat			= 0,
 	.debounce_time		= 5000,	/* ns (5ms) */
 	.coldrive_time		= 1000, /* ns (1ms) */
diff --git a/drivers/char/ec3104_keyb.c b/drivers/char/ec3104_keyb.c
deleted file mode 100644
index 020011495d91..000000000000
--- a/drivers/char/ec3104_keyb.c
+++ /dev/null
@@ -1,457 +0,0 @@
-/*
- * linux/drivers/char/ec3104_keyb.c
- * 
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- *
- * based on linux/drivers/char/pc_keyb.c, which had the following comments:
- *
- * Separation of the PC low-level part by Geert Uytterhoeven, May 1997
- * See keyboard.c for the whole history.
- *
- * Major cleanup by Martin Mares, May 1997
- *
- * Combined the keyboard and PS/2 mouse handling into one file,
- * because they share the same hardware.
- * Johan Myreen <jem@iki.fi> 1998-10-08.
- *
- * Code fixes to handle mouse ACKs properly.
- * C. Scott Ananian <cananian@alumni.princeton.edu> 1999-01-29.
- */
-/* EC3104 note:
- * This code was written without any documentation about the EC3104 chip.  While
- * I hope I got most of the basic functionality right, the register names I use
- * are most likely completely different from those in the chip documentation.
- *
- * If you have any further information about the EC3104, please tell me
- * (prumpf@tux.org).
- */
-
-
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/mm.h>
-#include <linux/signal.h>
-#include <linux/init.h>
-#include <linux/kbd_ll.h>
-#include <linux/delay.h>
-#include <linux/random.h>
-#include <linux/poll.h>
-#include <linux/miscdevice.h>
-#include <linux/slab.h>
-#include <linux/kbd_kern.h>
-#include <linux/bitops.h>
-
-#include <asm/keyboard.h>
-#include <asm/uaccess.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/ec3104.h>
-
-#include <asm/io.h>
-
-/* Some configuration switches are present in the include file... */
-
-#include <linux/pc_keyb.h>
-
-#define MSR_CTS 0x10
-#define MCR_RTS 0x02
-#define LSR_DR 0x01
-#define LSR_BOTH_EMPTY 0x60
-
-static struct e5_struct {
-	u8 packet[8];
-	int pos;
-	int length;
-
-	u8 cached_mcr;
-	u8 last_msr;
-} ec3104_keyb;
-	
-/* Simple translation table for the SysRq keys */
-
-
-#ifdef CONFIG_MAGIC_SYSRQ
-unsigned char ec3104_kbd_sysrq_xlate[128] =
-	"\000\0331234567890-=\177\t"			/* 0x00 - 0x0f */
-	"qwertyuiop[]\r\000as"				/* 0x10 - 0x1f */
-	"dfghjkl;'`\000\\zxcv"				/* 0x20 - 0x2f */
-	"bnm,./\000*\000 \000\201\202\203\204\205"	/* 0x30 - 0x3f */
-	"\206\207\210\211\212\000\000789-456+1"		/* 0x40 - 0x4f */
-	"230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */
-	"\r\000/";					/* 0x60 - 0x6f */
-#endif
-
-static void kbd_write_command_w(int data);
-static void kbd_write_output_w(int data);
-#ifdef CONFIG_PSMOUSE
-static void aux_write_ack(int val);
-static void __aux_write_ack(int val);
-#endif
-
-static DEFINE_SPINLOCK(kbd_controller_lock);
-static unsigned char handle_kbd_event(void);
-
-/* used only by send_data - set by keyboard_interrupt */
-static volatile unsigned char reply_expected;
-static volatile unsigned char acknowledge;
-static volatile unsigned char resend;
-
-
-int ec3104_kbd_setkeycode(unsigned int scancode, unsigned int keycode)
-{
-	return 0;
-}
-
-int ec3104_kbd_getkeycode(unsigned int scancode)
-{
-	return 0;
-}
-
-
-/* yes, it probably would be faster to use an array.  I don't care. */
-
-static inline unsigned char ec3104_scan2key(unsigned char scancode)
-{
-	switch (scancode) {
-	case  1: /* '`' */
-		return 41;
-		
-	case  2 ... 27:
-		return scancode;
-		
-	case 28: /* '\\' */
-		return 43;
-
-	case 29 ... 39:
-		return scancode + 1;
-
-	case 40: /* '\r' */
-		return 28;
-
-	case 41 ... 50:
-		return scancode + 3;
-
-	case 51: /* ' ' */
-		return 57;
-		
-	case 52: /* escape */
-		return 1;
-
-	case 54: /* insert/delete (labelled delete) */
-		/* this should arguably be 110, but I'd like to have ctrl-alt-del
-		 * working with a standard keymap */
-		return 111;
-
-	case 55: /* left */
-		return 105;
-	case 56: /* home */
-		return 102;
-	case 57: /* end */
-		return 107;
-	case 58: /* up */
-		return 103;
-	case 59: /* down */
-		return 108;
-	case 60: /* pgup */
-		return 104;
-	case 61: /* pgdown */
-		return 109;
-	case 62: /* right */
-		return 106;
-
-	case 79 ... 88: /* f1 - f10 */
-		return scancode - 20;
-
-	case 89 ... 90: /* f11 - f12 */
-		return scancode - 2;
-
-	case 91: /* left shift */
-		return 42;
-
-	case 92: /* right shift */
-		return 54;
-
-	case 93: /* left alt */
-		return 56;
-	case 94: /* right alt */
-		return 100;
-	case 95: /* left ctrl */
-		return 29;
-	case 96: /* right ctrl */
-		return 97;
-
-	case 97: /* caps lock */
-		return 58;
-	case 102: /* left windows */
-		return 125;
-	case 103: /* right windows */
-		return 126;
-
-	case 106: /* Fn */
-		/* this is wrong. */
-		return 84;
-
-	default:
-		return 0;
-	}
-}
-		
-int ec3104_kbd_translate(unsigned char scancode, unsigned char *keycode,
-		    char raw_mode)
-{
-	scancode &= 0x7f;
-
-	*keycode = ec3104_scan2key(scancode);
-
- 	return 1;
-}
-
-char ec3104_kbd_unexpected_up(unsigned char keycode)
-{
-	return 0200;
-}
-
-static inline void handle_keyboard_event(unsigned char scancode)
-{
-#ifdef CONFIG_VT
-	handle_scancode(scancode, !(scancode & 0x80));
-#endif				
-	tasklet_schedule(&keyboard_tasklet);
-}	
-
-void ec3104_kbd_leds(unsigned char leds)
-{
-}
-
-static u8 e5_checksum(u8 *packet, int count)
-{
-	int i;
-	u8 sum = 0;
-
-	for (i=0; i<count; i++)
-		sum ^= packet[i];
-		
-	if (sum & 0x80)
-		sum ^= 0xc0;
-
-	return sum;
-}
-
-static void e5_wait_for_cts(struct e5_struct *k)
-{
-	u8 msr;
-		
-	do {
-		msr = ctrl_inb(EC3104_SER4_MSR);
-	} while (!(msr & MSR_CTS));
-}
-
-
-static void e5_send_byte(u8 byte, struct e5_struct *k)
-{
-	u8 status;
-		
-	do {
-		status = ctrl_inb(EC3104_SER4_LSR);
-	} while ((status & LSR_BOTH_EMPTY) != LSR_BOTH_EMPTY);
-	
-	printk("<%02x>", byte);
-
-	ctrl_outb(byte, EC3104_SER4_DATA);
-
-	do {
-		status = ctrl_inb(EC3104_SER4_LSR);
-	} while ((status & LSR_BOTH_EMPTY) != LSR_BOTH_EMPTY);
-	
-}
-
-static int e5_send_packet(u8 *packet, int count, struct e5_struct *k)
-{
-	int i;
-
-	disable_irq(EC3104_IRQ_SER4);
-	
-	if (k->cached_mcr & MCR_RTS) {
-		printk("e5_send_packet: too slow\n");
-		enable_irq(EC3104_IRQ_SER4);
-		return -EAGAIN;
-	}
-
-	k->cached_mcr |= MCR_RTS;
-	ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
-
-	e5_wait_for_cts(k);
-
-	printk("p: ");
-
-	for(i=0; i<count; i++)
-		e5_send_byte(packet[i], k);
-
-	e5_send_byte(e5_checksum(packet, count), k);
-
-	printk("\n");
-
-	udelay(1500);
-
-	k->cached_mcr &= ~MCR_RTS;
-	ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
-
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	
-	
-
-	enable_irq(EC3104_IRQ_SER4);
-
-	
-
-	return 0;
-}
-
-/*
- * E5 packets we know about:
- * E5->host 0x80 0x05 <checksum> - resend packet
- * host->E5 0x83 0x43 <contrast> - set LCD contrast
- * host->E5 0x85 0x41 0x02 <brightness> 0x02 - set LCD backlight
- * E5->host 0x87 <ps2 packet> 0x00 <checksum> - external PS2 
- * E5->host 0x88 <scancode> <checksum> - key press
- */
-
-static void e5_receive(struct e5_struct *k)
-{
-	k->packet[k->pos++] = ctrl_inb(EC3104_SER4_DATA);
-
-	if (k->pos == 1) {
-		switch(k->packet[0]) {
-		case 0x80:
-			k->length = 3;
-			break;
-			
-		case 0x87: /* PS2 ext */
-			k->length = 6;
-			break;
-
-		case 0x88: /* keyboard */
-			k->length = 3;
-			break;
-
-		default:
-			k->length = 1;
-			printk(KERN_WARNING "unknown E5 packet %02x\n",
-			       k->packet[0]);
-		}
-	}
-
-	if (k->pos == k->length) {
-		int i;
-
-		if (e5_checksum(k->packet, k->length) != 0)
-			printk(KERN_WARNING "E5: wrong checksum\n");
-
-#if 0
-		printk("E5 packet [");
-		for(i=0; i<k->length; i++) {
-			printk("%02x ", k->packet[i]);
-		}
-
-		printk("(%02x)]\n", e5_checksum(k->packet, k->length-1));
-#endif
-
-		switch(k->packet[0]) {
-		case 0x80:
-		case 0x88:
-			handle_keyboard_event(k->packet[1]);
-			break;
-		}
-
-		k->pos = k->length = 0;
-	}
-}
-
-static void ec3104_keyb_interrupt(int irq, void *data)
-{
-	struct e5_struct *k = &ec3104_keyb;
-	u8 msr, lsr;
-
-	msr = ctrl_inb(EC3104_SER4_MSR);
-	
-	if ((msr & MSR_CTS) && !(k->last_msr & MSR_CTS)) {
-		if (k->cached_mcr & MCR_RTS)
-			printk("confused: RTS already high\n");
-		/* CTS went high.  Send RTS. */
-		k->cached_mcr |= MCR_RTS;
-		
-		ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
-	} else if ((!(msr & MSR_CTS)) && (k->last_msr & MSR_CTS)) {
-		/* CTS went low. */
-		if (!(k->cached_mcr & MCR_RTS))
-			printk("confused: RTS already low\n");
-
-		k->cached_mcr &= ~MCR_RTS;
-
-		ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
-	}
-
-	k->last_msr = msr;
-
-	lsr = ctrl_inb(EC3104_SER4_LSR);
-
-	if (lsr & LSR_DR)
-		e5_receive(k);
-}
-
-static void ec3104_keyb_clear_state(void)
-{
-	struct e5_struct *k = &ec3104_keyb;
-	u8 msr, lsr;
-	
-	/* we want CTS to be low */
-	k->last_msr = 0;
-
-	for (;;) {
-		msleep(100);
-
-		msr = ctrl_inb(EC3104_SER4_MSR);
-	
-		lsr = ctrl_inb(EC3104_SER4_LSR);
-		
-		if (lsr & LSR_DR) {
-			e5_receive(k);
-			continue;
-		}
-
-		if ((msr & MSR_CTS) && !(k->last_msr & MSR_CTS)) {
-			if (k->cached_mcr & MCR_RTS)
-				printk("confused: RTS already high\n");
-			/* CTS went high.  Send RTS. */
-			k->cached_mcr |= MCR_RTS;
-		
-			ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
-		} else if ((!(msr & MSR_CTS)) && (k->last_msr & MSR_CTS)) {
-			/* CTS went low. */
-			if (!(k->cached_mcr & MCR_RTS))
-				printk("confused: RTS already low\n");
-			
-			k->cached_mcr &= ~MCR_RTS;
-			
-			ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
-		} else
-			break;
-
-		k->last_msr = msr;
-
-		continue;
-	}
-}
-
-void __init ec3104_kbd_init_hw(void)
-{
-	ec3104_keyb.last_msr = ctrl_inb(EC3104_SER4_MSR);
-	ec3104_keyb.cached_mcr = ctrl_inb(EC3104_SER4_MCR);
-
-	ec3104_keyb_clear_state();
-
-	/* Ok, finally allocate the IRQ, and off we go.. */
-	request_irq(EC3104_IRQ_SER4, ec3104_keyb_interrupt, 0, "keyboard", NULL);
-}
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e47f88170806..700a1657554f 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -158,6 +158,7 @@ config SENSORS_K8TEMP
 config SENSORS_AMS
 	tristate "Apple Motion Sensor driver"
 	depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
+	select INPUT_POLLDEV
 	help
 	  Support for the motion sensor included in PowerBooks. Includes
 	  implementations for PMU and I2C.
@@ -701,6 +702,7 @@ config SENSORS_W83627EHF
 config SENSORS_HDAPS
 	tristate "IBM Hard Drive Active Protection System (hdaps)"
 	depends on INPUT && X86
+	select INPUT_POLLDEV
 	default n
 	help
 	  This driver provides support for the IBM Hard Drive Active Protection
@@ -722,6 +724,7 @@ config SENSORS_APPLESMC
 	depends on INPUT && X86
 	select NEW_LEDS
 	select LEDS_CLASS
+	select INPUT_POLLDEV
 	default n
 	help
 	  This driver provides support for the Apple System Management
diff --git a/drivers/hwmon/ams/ams-input.c b/drivers/hwmon/ams/ams-input.c
index ca7095d96ad0..7b81e0c2c2d9 100644
--- a/drivers/hwmon/ams/ams-input.c
+++ b/drivers/hwmon/ams/ams-input.c
@@ -27,47 +27,32 @@ static unsigned int invert;
 module_param(invert, bool, 0644);
 MODULE_PARM_DESC(invert, "Invert input data on X and Y axis");
 
-static int ams_input_kthread(void *data)
+static void ams_idev_poll(struct input_polled_dev *dev)
 {
+	struct input_dev *idev = dev->input;
 	s8 x, y, z;
 
-	while (!kthread_should_stop()) {
-		mutex_lock(&ams_info.lock);
-
-		ams_sensors(&x, &y, &z);
-
-		x -= ams_info.xcalib;
-		y -= ams_info.ycalib;
-		z -= ams_info.zcalib;
-
-		input_report_abs(ams_info.idev, ABS_X, invert ? -x : x);
-		input_report_abs(ams_info.idev, ABS_Y, invert ? -y : y);
-		input_report_abs(ams_info.idev, ABS_Z, z);
+	mutex_lock(&ams_info.lock);
 
-		input_sync(ams_info.idev);
+	ams_sensors(&x, &y, &z);
 
-		mutex_unlock(&ams_info.lock);
+	x -= ams_info.xcalib;
+	y -= ams_info.ycalib;
+	z -= ams_info.zcalib;
 
-		msleep(25);
-	}
+	input_report_abs(idev, ABS_X, invert ? -x : x);
+	input_report_abs(idev, ABS_Y, invert ? -y : y);
+	input_report_abs(idev, ABS_Z, z);
 
-	return 0;
-}
+	input_sync(idev);
 
-static int ams_input_open(struct input_dev *dev)
-{
-	ams_info.kthread = kthread_run(ams_input_kthread, NULL, "kams");
-	return IS_ERR(ams_info.kthread) ? PTR_ERR(ams_info.kthread) : 0;
-}
-
-static void ams_input_close(struct input_dev *dev)
-{
-	kthread_stop(ams_info.kthread);
+	mutex_unlock(&ams_info.lock);
 }
 
 /* Call with ams_info.lock held! */
 static void ams_input_enable(void)
 {
+	struct input_dev *input;
 	s8 x, y, z;
 
 	if (ams_info.idev)
@@ -78,27 +63,29 @@ static void ams_input_enable(void)
 	ams_info.ycalib = y;
 	ams_info.zcalib = z;
 
-	ams_info.idev = input_allocate_device();
+	ams_info.idev = input_allocate_polled_device();
 	if (!ams_info.idev)
 		return;
 
-	ams_info.idev->name = "Apple Motion Sensor";
-	ams_info.idev->id.bustype = ams_info.bustype;
-	ams_info.idev->id.vendor = 0;
-	ams_info.idev->open = ams_input_open;
-	ams_info.idev->close = ams_input_close;
-	ams_info.idev->dev.parent = &ams_info.of_dev->dev;
+	ams_info.idev->poll = ams_idev_poll;
+	ams_info.idev->poll_interval = 25;
+
+	input = ams_info.idev->input;
+	input->name = "Apple Motion Sensor";
+	input->id.bustype = ams_info.bustype;
+	input->id.vendor = 0;
+	input->dev.parent = &ams_info.of_dev->dev;
 
-	input_set_abs_params(ams_info.idev, ABS_X, -50, 50, 3, 0);
-	input_set_abs_params(ams_info.idev, ABS_Y, -50, 50, 3, 0);
-	input_set_abs_params(ams_info.idev, ABS_Z, -50, 50, 3, 0);
+	input_set_abs_params(input, ABS_X, -50, 50, 3, 0);
+	input_set_abs_params(input, ABS_Y, -50, 50, 3, 0);
+	input_set_abs_params(input, ABS_Z, -50, 50, 3, 0);
 
-	set_bit(EV_ABS, ams_info.idev->evbit);
-	set_bit(EV_KEY, ams_info.idev->evbit);
-	set_bit(BTN_TOUCH, ams_info.idev->keybit);
+	set_bit(EV_ABS, input->evbit);
+	set_bit(EV_KEY, input->evbit);
+	set_bit(BTN_TOUCH, input->keybit);
 
-	if (input_register_device(ams_info.idev)) {
-		input_free_device(ams_info.idev);
+	if (input_register_polled_device(ams_info.idev)) {
+		input_free_polled_device(ams_info.idev);
 		ams_info.idev = NULL;
 		return;
 	}
@@ -108,7 +95,8 @@ static void ams_input_enable(void)
 static void ams_input_disable(void)
 {
 	if (ams_info.idev) {
-		input_unregister_device(ams_info.idev);
+		input_unregister_polled_device(ams_info.idev);
+		input_free_polled_device(ams_info.idev);
 		ams_info.idev = NULL;
 	}
 }
diff --git a/drivers/hwmon/ams/ams.h b/drivers/hwmon/ams/ams.h
index 240730e6bcde..a6221e5dd984 100644
--- a/drivers/hwmon/ams/ams.h
+++ b/drivers/hwmon/ams/ams.h
@@ -1,5 +1,5 @@
 #include <linux/i2c.h>
-#include <linux/input.h>
+#include <linux/input-polldev.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
@@ -52,8 +52,7 @@ struct ams {
 #endif
 
 	/* Joystick emulation */
-	struct task_struct *kthread;
-	struct input_dev *idev;
+	struct input_polled_dev *idev;
 	__u16 bustype;
 
 	/* calibrated null values */
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index f37fd7ebf65a..4879125b4cdc 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -28,7 +28,7 @@
 
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <linux/input.h>
+#include <linux/input-polldev.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/timer.h>
@@ -59,9 +59,9 @@
 
 #define LIGHT_SENSOR_LEFT_KEY	"ALV0" /* r-o {alv (6 bytes) */
 #define LIGHT_SENSOR_RIGHT_KEY	"ALV1" /* r-o {alv (6 bytes) */
-#define BACKLIGHT_KEY 		"LKSB" /* w-o {lkb (2 bytes) */
+#define BACKLIGHT_KEY		"LKSB" /* w-o {lkb (2 bytes) */
 
-#define CLAMSHELL_KEY 		"MSLD" /* r-o ui8 (unused) */
+#define CLAMSHELL_KEY		"MSLD" /* r-o ui8 (unused) */
 
 #define MOTION_SENSOR_X_KEY	"MO_X" /* r-o sp78 (2 bytes) */
 #define MOTION_SENSOR_Y_KEY	"MO_Y" /* r-o sp78 (2 bytes) */
@@ -103,7 +103,7 @@ static const char* fan_speed_keys[] = {
 #define INIT_TIMEOUT_MSECS	5000	/* wait up to 5s for device init ... */
 #define INIT_WAIT_MSECS		50	/* ... in 50ms increments */
 
-#define APPLESMC_POLL_PERIOD	(HZ/20)	/* poll for input every 1/20s */
+#define APPLESMC_POLL_INTERVAL	50	/* msecs */
 #define APPLESMC_INPUT_FUZZ	4	/* input event threshold */
 #define APPLESMC_INPUT_FLAT	4
 
@@ -125,9 +125,8 @@ static const int debug;
 static struct platform_device *pdev;
 static s16 rest_x;
 static s16 rest_y;
-static struct timer_list applesmc_timer;
-static struct input_dev *applesmc_idev;
 static struct device *hwmon_dev;
+static struct input_polled_dev *applesmc_idev;
 
 /* Indicates whether this computer has an accelerometer. */
 static unsigned int applesmc_accelerometer;
@@ -138,7 +137,7 @@ static unsigned int applesmc_light;
 /* Indicates which temperature sensors set to use. */
 static unsigned int applesmc_temperature_set;
 
-static struct mutex applesmc_lock;
+static DEFINE_MUTEX(applesmc_lock);
 
 /*
  * Last index written to key_at_index sysfs file, and value to use for all other
@@ -455,27 +454,12 @@ static void applesmc_calibrate(void)
 	rest_x = -rest_x;
 }
 
-static int applesmc_idev_open(struct input_dev *dev)
-{
-	add_timer(&applesmc_timer);
-
-	return 0;
-}
-
-static void applesmc_idev_close(struct input_dev *dev)
-{
-	del_timer_sync(&applesmc_timer);
-}
-
-static void applesmc_idev_poll(unsigned long unused)
+static void applesmc_idev_poll(struct input_polled_dev *dev)
 {
+	struct input_dev *idev = dev->input;
 	s16 x, y;
 
-	/* Cannot sleep.  Try nonblockingly.  If we fail, try again later. */
-	if (!mutex_trylock(&applesmc_lock)) {
-		mod_timer(&applesmc_timer, jiffies + APPLESMC_POLL_PERIOD);
-		return;
-	}
+	mutex_lock(&applesmc_lock);
 
 	if (applesmc_read_motion_sensor(SENSOR_X, &x))
 		goto out;
@@ -483,13 +467,11 @@ static void applesmc_idev_poll(unsigned long unused)
 		goto out;
 
 	x = -x;
-	input_report_abs(applesmc_idev, ABS_X, x - rest_x);
-	input_report_abs(applesmc_idev, ABS_Y, y - rest_y);
-	input_sync(applesmc_idev);
+	input_report_abs(idev, ABS_X, x - rest_x);
+	input_report_abs(idev, ABS_Y, y - rest_y);
+	input_sync(idev);
 
 out:
-	mod_timer(&applesmc_timer, jiffies + APPLESMC_POLL_PERIOD);
-
 	mutex_unlock(&applesmc_lock);
 }
 
@@ -821,8 +803,7 @@ static ssize_t applesmc_key_at_index_read_show(struct device *dev,
 
 	if (!ret) {
 		return info[0];
-	}
-	else {
+	} else {
 		return ret;
 	}
 }
@@ -1093,6 +1074,7 @@ static int applesmc_dmi_match(const struct dmi_system_id *id)
 /* Create accelerometer ressources */
 static int applesmc_create_accelerometer(void)
 {
+	struct input_dev *idev;
 	int ret;
 
 	ret = sysfs_create_group(&a