Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - support for inhibiting input devices at request from userspace. If a
   device implements open/close methods, it can also put device into low
   power state. This is needed, for example, to disable keyboard and
   touchpad on convertibles when they are transitioned into tablet mode

 - now that ordinary input devices can be configured for polling mode,
   dedicated input polling device implementation has been removed

 - GTCO tablet driver has been removed, as it used problematic custom
   HID parser, devices are EOL, and there is no interest from the
   manufacturer

 - a new driver for Dialog DA7280 haptic chips has been introduced

 - a new driver for power button on Dell Wyse 3020

 - support for eKTF2132 in ektf2127 driver

 - support for SC2721 and SC2730 in sc27xx-vibra driver

 - enhancements for Atmel touchscreens, AD7846 touchscreens, Elan
   touchpads, ADP5589, ST1232 touchscreen, TM2 touchkey drivers

 - fixes and cleanups to allow clean builds with W=1

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits)
  Input: da7280 - fix spelling mistake "sequemce" -> "sequence"
  Input: cyapa_gen6 - fix out-of-bounds stack access
  Input: sc27xx - add support for sc2730 and sc2721
  dt-bindings: input: Add compatible string for SC2721 and SC2730
  dt-bindings: input: Convert sc27xx-vibra.txt to json-schema
  Input: stmpe - add axis inversion and swapping capability
  Input: adp5589-keys - do not explicitly control IRQ for wakeup
  Input: adp5589-keys - do not unconditionally configure as wakeup source
  Input: ipx4xx-beeper - convert comma to semicolon
  Input: parkbd - convert comma to semicolon
  Input: new da7280 haptic driver
  dt-bindings: input: Add document bindings for DA7280
  MAINTAINERS: da7280 updates to the Dialog Semiconductor search terms
  Input: elantech - fix protocol errors for some trackpoints in SMBus mode
  Input: elan_i2c - add new trackpoint report type 0x5F
  Input: elants - document some registers and values
  Input: atmel_mxt_ts - simplify the return expression of mxt_send_bootloader_cmd()
  Input: imx_keypad - add COMPILE_TEST support
  Input: applespi - use new structure for SPI transfer delays
  Input: synaptics-rmi4 - use new structure for SPI transfer delays
  ...

121 files changed, 2989 insertions, 2381 deletions

diff --git a/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
new file mode 100644
index 000000000000..b4ad829d7383
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ariel-pwrbutton.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dell Wyse 3020 a.k.a. "Ariel" Power Button
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+description: |
+  The ENE Embedded Controller on the Ariel board has an interface to the
+  SPI bus that is capable of sending keyboard and mouse data. A single
+  power button is attached to it. This binding describes this
+  configuration.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: dell,wyse-ariel-ec-input
+      - const: ene,kb3930-input
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-button@0 {
+            compatible = "dell,wyse-ariel-ec-input", "ene,kb3930-input";
+            reg = <0>;
+            interrupt-parent = <&gpio>;
+            interrupts = <60 IRQ_TYPE_EDGE_RISING>;
+            spi-max-frequency = <33000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
deleted file mode 100644
index c88919480d37..000000000000
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Atmel maXTouch touchscreen/touchpad
-
-Required properties:
-- compatible:
-    atmel,maxtouch
-
-    The following compatibles have been used in various products but are
-    deprecated:
-	atmel,qt602240_ts
-	atmel,atmel_mxt_ts
-	atmel,atmel_mxt_tp
-	atmel,mXT224
-
-- reg: The I2C address of the device
-
-- interrupts: The sink for the touchpad's IRQ output
-    See ../interrupt-controller/interrupts.txt
-
-Optional properties for main touchpad device:
-
-- linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages
-    on GPIO bit changes. An array of up to 8 entries can be provided
-    indicating the Linux keycode mapped to each bit of the status byte,
-    starting at the LSB. Linux keycodes are defined in
-    <dt-bindings/input/input.h>.
-
-    Note: the numbering of the GPIOs and the bit they start at varies between
-    maXTouch devices. You must either refer to the documentation, or
-    experiment to determine which bit corresponds to which input. Use
-    KEY_RESERVED for unused padding values.
-
-- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
-