Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (73 commits)
  [SCSI] aic79xx: Add ASC-29320LPE ids to driver
  [SCSI] stex: version update
  [SCSI] stex: change wait loop code
  [SCSI] stex: add new device type support
  [SCSI] stex: update device id info
  [SCSI] stex: adjust default queue length
  [SCSI] stex: add value check in hard reset routine
  [SCSI] stex: fix controller_info command handling
  [SCSI] stex: fix biosparam calculation
  [SCSI] megaraid: fix MMIO casts
  [SCSI] tgt: fix undefined flush_dcache_page() problem
  [SCSI] libsas: better error handling in sas_expander.c
  [SCSI] lpfc 8.1.11 : Change version number to 8.1.11
  [SCSI] lpfc 8.1.11 : Misc Fixes
  [SCSI] lpfc 8.1.11 : Add soft_wwnn sysfs attribute, rename soft_wwn_enable
  [SCSI] lpfc 8.1.11 : Removed decoding of PCI Subsystem Id
  [SCSI] lpfc 8.1.11 : Add MSI (Message Signalled Interrupts) support
  [SCSI] lpfc 8.1.11 : Adjust LOG_FCP logging
  [SCSI] lpfc 8.1.11 : Fix Memory leaks
  [SCSI] lpfc 8.1.11 : Fix lpfc_multi_ring_support
  ...

83 files changed, 4760 insertions, 1126 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 15e4fed127f6..2e1898e4e8fd 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1416,6 +1416,11 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	scsi_logging=	[SCSI]
 
+	scsi_mod.scan=	[SCSI] sync (default) scans SCSI busses as they are
+			discovered.  async scans them in kernel threads,
+			allowing boot to proceed.  none ignores them, expecting
+			user space to do the scan.
+
 	selinux		[SELINUX] Disable or enable SELinux at boot time.
 			Format: { "0" | "1" }
 			See security/selinux/Kconfig help text.
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
index 75a535a975c3..6f70f2b9327e 100644
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@@ -375,7 +375,6 @@ Summary:
    scsi_add_device - creates new scsi device (lu) instance
    scsi_add_host - perform sysfs registration and set up transport class
    scsi_adjust_queue_depth - change the queue depth on a SCSI device
-   scsi_assign_lock - replace default host_lock with given lock
    scsi_bios_ptable - return copy of block device's partition table
    scsi_block_requests - prevent further commands being queued to given host
    scsi_deactivate_tcq - turn off tag command queueing
@@ -489,20 +488,6 @@ void scsi_adjust_queue_depth(struct scsi_device * sdev, int tagged,
 
 
 /**
- * scsi_assign_lock - replace default host_lock with given lock
- * @shost: a pointer to a scsi host instance
- * @lock: pointer to lock to replace host_lock for this host
- *
- *      Returns nothing
- *
- *      Might block: no
- *
- *      Defined in: include/scsi/scsi_host.h .
- **/
-void scsi_assign_lock(struct Scsi_Host *shost, spinlock_t *lock)
-
-
-/**
  * scsi_bios_ptable - return copy of block device's partition table
  * @dev:        pointer to block device
  *
@@ -1366,17 +1351,11 @@ Locks
 Each struct Scsi_Host instance has a spin_lock called struct 
 Scsi_Host::default_lock which is initialized in scsi_host_alloc() [found in 
 hosts.c]. Within the same function the struct Scsi_Host::host_lock pointer
-is initialized to point at default_lock with the scsi_assign_lock() function.
-Thereafter lock and unlock operations performed by the mid level use the
-struct Scsi_Host::host_lock pointer.
-
-LLDs can override the use of struct Scsi_Host::default_lock by
-using scsi_assign_lock(). The earliest opportunity to do this would
-be in the detect() function after it has invoked scsi_register(). It
-could be replaced by a coarser grain lock (e.g. per driver) or a
-lock of equal granularity (i.e. per host). Using finer grain locks 
-(e.g. per SCSI device) may be possible by juggling locks in
-queuecommand().
+is initialized to point at default_lock.  Thereafter lock and unlock
+operations performed by the mid level use the struct Scsi_Host::host_lock
+pointer.  Previously drivers could override the host_lock pointer but
+this is not allowed anymore.
+
 
 Autosense
 =========
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 5493c2fbbab1..b3e210723a71 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -277,7 +277,7 @@ static int sg_io(struct file *file, request_queue_t *q,
 	if (rq->bio)
 		blk_queue_bounce(q, &rq->bio);
 
-	rq->timeout = (hdr->timeout * HZ) / 1000;
+	rq->timeout = jiffies_to_msecs(hdr->timeout);
 	if (!rq->timeout)
 		rq->timeout = q->sg_timeout;
 	if (!rq->timeout)
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 562432d017b0..335a25540c08 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -622,8 +622,10 @@ NCR_700_scsi_done(struct NCR_700_Host_Parameters *hostdata,
 			dma_unmap_single(hostdata->dev, slot->dma_handle, sizeof(SCp->sense_buffer), DMA_FROM_DEVICE);
 			/* restore the old result if the request sense was
 			 * successful */
-			if(result == 0)
+			if (result == 0)
 				result = cmnd[7];
+			/* restore the original length */
+			SCp->cmd_len = cmnd[8];
 		} else
 			NCR_700_unmap(hostdata, SCp, slot);
 
@@ -1007,6 +1009,9 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
 				 * of the command */
 				cmnd[6] = NCR_700_INTERNAL_SENSE_MAGIC;
 				cmnd[7] = hostdata->status[0];
+				cmnd[8] = SCp->cmd_len;
+				SCp->cmd_len = 6; /* command length for
+						   * REQUEST_SENSE */
 				slot->pCmd = dma_map_single(hostdata->dev, cmnd, MAX_COMMAND_SIZE, DMA_TO_DEVICE);
 				slot->dma_handle = dma_map_single(hostdata->dev, SCp->sense_buffer, sizeof(SCp->sense_buffer), DMA_FROM_DEVICE);
 				slot->SG[0].ins = bS_to_host(SCRIPT_MOVE_DATA_IN | sizeof(SCp->sense_buffer));
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index cdd033724786..3075204915c8 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -2186,21 +2186,21 @@ static int __init BusLogic_init(void)
 
 	if (BusLogic_ProbeOptions.NoProbe)
 		return -ENODEV;
-	BusLogic_ProbeInfoList = (struct BusLogic_ProbeInfo *)
-	    kmalloc(BusLogic_MaxHostAdapters * sizeof(struct BusLogic_ProbeInfo), GFP_ATOMIC);
+	BusLogic_ProbeInfoList =
+	    kzalloc(BusLogic_MaxHostAdapters * sizeof(struct BusLogic_ProbeInfo), GFP_KERNEL);
 	if (BusLogic_ProbeInfoList == NULL) {
 		BusLogic_Error("BusLogic: Unable to allocate Probe Info List\n", NULL);
 		return -ENOMEM;
 	}
-	memset(BusLogic_ProbeInfoList, 0, BusLogic_MaxHostAdapters * sizeof(struct BusLogic_ProbeInfo));
-	PrototypeHostAdapter = (struct BusLogic_HostAdapter *)
-	    kmalloc(sizeof(struct BusLogic_HostAdapter), GFP_ATOMIC);
+
+	PrototypeHostAdapter =
+	    kzalloc(sizeof(struct BusLogic_HostAdapter), GFP_KERNEL);
 	if (PrototypeHostAdapter == NULL) {
 		kfree(BusLogic_ProbeInfoList);
 		BusLogic_Error("BusLogic: Unable to allocate Prototype " "Host Adapter\n", NULL);
 		return -ENOMEM;
 	}
-	memset(PrototypeHostAdapter, 0, sizeof(struct BusLogic_HostAdapter));
+
 #ifdef MODULE
 	if (BusLogic != NULL)
 		BusLogic_Setup(BusLogic);
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 9540eb8efdcb..69569096dae5 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -29,6 +29,13 @@ config SCSI
 	  However, do not compile this as a module if your root file system
 	  (the one containing the directory /) is located on a SCSI device.
 
+config SCSI_TGT
+	tristate "SCSI target support"
+	depends on SCSI && EXPERIMENTAL
+	---help---
+	  If you want to use SCSI target mode drivers enable this option.
+	  If you choose M, the module will be called scsi_tgt.
+
 config SCSI_NETLINK
 	bool
 	default	n
@@ -216,6 +223,23 @@ config SCSI_LOGGING
 	  there should be no noticeable performance impact as long as you have
 	  logging turned off.
 
+config SCSI_SCAN_ASYNC
+	bool "Asynchronous SCSI scanning"
+	depends on SCSI
+	help
+	  The SCSI subsystem can probe for devices while the rest of the
+	  system continues booting, and even probe devices on different
+	  busses in parallel, leading to a significant speed-up.
+	  If you have built SCSI as modules, enabling this option can
+	  be a problem as the devices may not have been found by the
+	  time your system expects them to have been.  You can load the
+	  scsi_wait_scan module to ensure that all scans have completed.
+	  If you build your SCSI drivers into the kernel, then everything
+	  will work fine if you say Y here.
+
+	  You can override this choice by specifying scsi_mod.scan="sync"
+	  or "async" on the kernel's command line.
+
 menu "SCSI Transports"
 	depends on SCSI
 
@@ -797,6 +821,20 @@ config SCSI_IBMVSCSI
 	  To compile this driver as a module, choose M here: the
 	  module will be called ibmvscsic.
 
+config SCSI_IBMVSCSIS
+	tristate "IBM Virtual SCSI Server support"
+	depends on PPC_PSERIES && SCSI_TGT && SCSI_SRP
+	help
+	  This is the SRP target driver for IBM pSeries virtual environments.
+
+	  The userspace component needed to initialize the driver and
+	  documentation can be found:
+
+	  http://stgt.berlios.de/
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ibmvstgt.
+
 config SCSI_INITIO
 	tristate "Initio 9100U(W) support"
 	depends on PCI && SCSI
@@ -944,8 +982,13 @@ config SCSI_STEX
 	tristate "Promise SuperTrak EX Series support"
 	depends on PCI && SCSI
 	---help---
-	  This driver supports Promise SuperTrak EX8350/8300/16350/16300
-	  Storage controllers.
+	  This driver supports Promise SuperTrak EX series storage controllers.
+
+	  Promise provides Linux RAID configuration utility for these
+	  controllers. Please visit <http://www.promise.com> to download.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stex.
 
 config SCSI_SYM53C8XX_2
 	tristate "SYM53C8XX Version 2 SCSI support"
@@ -1026,6 +1069,7 @@ config SCSI_IPR
 config SCSI_IPR_TRACE
 	bool "enable driver internal trace"
 	depends on SCSI_IPR
+	default y
 	help
 	  If you say Y here, the driver will trace all commands issued
 	  to the adapter. Performance impact is minimal. Trace can be
@@ -1034,6 +1078,7 @@ config SCSI_IPR_TRACE
 config SCSI_IPR_DUMP
 	bool "enable adapter dump support"
 	depends on SCSI_IPR
+	default y
 	help
 	  If you say Y here, the driver will support adapter crash dump.
 	  If you enable this support, the iprdump daemon can be used
@@ -1734,6 +1779,16 @@ config ZFCP
           called zfcp. If you want to compile it as a module, say M here
           and read <file:Documentation/modules.txt>.
 
+config SCSI_SRP
+	tristate "SCSI RDMA Protocol helper library"
+	depends on SCSI && PCI
+	select SCSI_TGT
+	help
+	  If you wish to use SRP target drivers, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called libsrp.
+
 endmenu
 
 source "drivers/scsi/pcmcia/Kconfig"
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index bcca39c3bcbf..bd7c9888f7f4 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -21,6 +21,7 @@ CFLAGS_seagate.o =   -DARBITRATE -DPARITY -DSEAGATE_USE_ASM
 subdir-$(CONFIG_PCMCIA)		+= pcmcia
 
 obj-$(CONFIG_SCSI)		+= scsi_mod.o
+obj-$(CONFIG_SCSI_TGT)		+= scsi_tgt.o
 
 obj-$(CONFIG_RAID_ATTRS)	+= raid_class.o
 
@@ -125,7 +126,9 @@ obj-$(CONFIG_SCSI_FCAL)		+= fcal.o
 obj-$(CONFIG_SCSI_LASI700)	+= 53c700.o lasi700.o
 obj-$(CONFIG_SCSI_NSP32)	+= nsp32.o
 obj-$(CONFIG_SCSI_IPR)		+= ipr.o
+obj-$(CONFIG_SCSI_SRP)		+= libsrp.o
 obj-$(CONFIG_SCSI_IBMVSCSI)	+= ibmvscsi/
+obj-$(CONFIG_SCSI_IBMVSCSIS)	+= ibmvscsi/
 obj-$(CONFIG_SCSI_HPTIOP)	+= hptiop.o
 obj-$(CONFIG_SCSI_STEX)		+= stex.o
 
@@ -141,6 +144,8 @@ obj-$(CONFIG_CHR_DEV_SCH)	+= ch.o
 # This goes last, so that "real" scsi devices probe earlier
 obj-$(CONFIG_SCSI_DEBUG)	+= scsi_debug.o
 
+obj-$(CONFIG_SCSI)		+= scsi_wait_scan.o
+
 scsi_mod-y			+= scsi.o hosts.o scsi_ioctl.o constants.o \
 				   scsicam.o scsi_error.o scsi_lib.o \
 				   scsi_scan.o scsi_sysfs.o \
@@ -149,6 +154,8 @@ scsi_mod-$(CONFIG_SCSI_NETLINK)	+= scsi_netlink.o
 scsi_mod-$(CONFIG_SYSCTL)	+= scsi_sysctl.o
 scsi_mod-$(CONFIG_SCSI_PROC_FS)	+= scsi_proc.o
 
+scsi_tgt-y			+= scsi_tgt_lib.o scsi_tgt_if.o
+
 sd_mod-objs	:= sd.o
 sr_mod-objs	:= sr.o sr_ioctl.o sr_vendor.o
 ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
diff --git a/drivers/scsi/NCR53c406a.c b/drivers/scsi/NCR53c406a.c
index d4613815f685..8578555d58fd 100644
--- a/drivers/scsi/NCR53c406a.c
+++ b/drivers/scsi/NCR53c406a.c
@@ -220,9 +220,11 @@ static void *addresses[] = {
 static unsigned short ports[] = { 0x230, 0x330, 0x280, 0x290, 0x330, 0x340, 0x300, 0x310, 0x348, 0x350 };
 #define PORT_COUNT ARRAY_SIZE(ports)
 
+#ifndef MODULE
 /* possible interrupt channels */
 static unsigned short intrs[] = { 10, 11, 12, 15 };
 #define INTR_COUNT ARRAY_SIZE(intrs)
+#endif /* !MODULE */
 
 /* signatures for NCR 53c406a based controllers */
 #if USE_BIOS
@@ -605,6 +607,7 @@ static int NCR53c406a_release(struct Scsi_Host *shost)
 	return 0;
 }
 
+#ifndef MODULE
 /* called from init/main.c */
 static int __init NCR53c406a_setup(char *str)
 {
@@ -661,6 +664,8 @@ static int __init NCR53c406a_setup(char *str)
 
 __setup("ncr53c406a=", NCR53c406a_setup);
 
+#endif /* !MODULE */
+
 static const char *NCR53c406a_info(struct Scsi_Host *SChost)
 {
 	DEB(printk("NCR53c406a_info called\n"));
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index eb3ed91bac79..4f8b4c53d435 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -11,8 +11,8 @@
  *----------------------------------------------------------------------------*/
 
 #ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 2409
-# define AAC_DRIVER_BRANCH "-mh2"
+# define AAC_DRIVER_BUILD 2423
+# define AAC_DRIVER_BRANCH "-mh3"
 #endif
 #define MAXIMUM_NUM_CONTAINERS	32
 
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 19e42ac07cb2..4893a6d06a33 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -518,6 +518,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
 			 */
 			unsigned long count = 36000000L; /* 3 minutes */
 			while (down_trylock(&fibptr->event_wait)) {
+				int blink;
 				if (--count == 0) {
 					spin_lock_irqsave(q->lock, qflags);
 					q->numpending--;
@@ -530,6 +531,14 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
 					}
 					return -ETIMEDOUT;
 				}
+				if ((blink = aac_adapter_check_health(dev)) > 0) {
+					if (wait == -1) {
+	        				printk(KERN_ERR "aacraid: aac_fib_send: adapter blinkLED 0x%x.\n"
+						  "Usually a result of a serious unrecoverable hardware problem\n",
+						  blink);
+					}
+					return -EFAULT;
+				}
 				udelay(5);
 			}
 		} else if (down_interruptible(&fibptr->event_wait)) {
@@ -1093,6 +1102,20 @@ static int _aac_reset_adapter(struct aac_dev *aac)
 		goto out;
 	}
 
+	/*
+	 *	Loop through the fibs, close the synchronous FIBS
+	 */
+	for (index = 0; index < (aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); index++) {
+		struct fib *fib = &aac->fibs[index];
+		if (!(fib->hw_fib->header.XferState & cpu_to_le32(NoResponseExpected | Async)) &&
+		  (fib->hw_fib->header.XferState & cpu_to_le32(ResponseExpected))) {
+			unsigned long flagv;
+			spin_lock_irqsave(&fib->event_lock, flagv);
+			up(&fib->event_wait);
+			spin_unlock_irqrestore(&fib->event_lock, flagv);
+			schedule