MIPS: eXcite: Remove platform.

The platform has never been fully merged 

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Koeller <thomas.koeller@baslerweb.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Wim Van Sebroeck <wim@iguana.be>

75 files changed, 0 insertions, 3912 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 0be245d28a1d..f374ccac1917 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -50,23 +50,6 @@ config AR7
 	  Support for the Texas Instruments AR7 System-on-a-Chip
 	  family: TNETD7100, 7200 and 7300.
 
-config BASLER_EXCITE
-	bool "Basler eXcite smart camera"
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_COHERENT
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select IRQ_CPU_RM7K
-	select IRQ_CPU_RM9K
-	select MIPS_RM9122
-	select SYS_HAS_CPU_RM9000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	help
-	  The eXcite is a smart camera platform manufactured by
-	  Basler Vision Technologies AG.
-
 config BCM47XX
 	bool "BCM47XX based boards"
 	select CEVT_R4K
@@ -701,7 +684,6 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
-source "arch/mips/basler/excite/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index d2c39fdcdfeb..1893efd43fca 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -369,13 +369,6 @@ cflags-$(CONFIG_PMC_YOSEMITE)	+= -I$(srctree)/arch/mips/include/asm/mach-yosemit
 load-$(CONFIG_PMC_YOSEMITE)	+= 0xffffffff80100000
 
 #
-# Basler eXcite
-#
-core-$(CONFIG_BASLER_EXCITE)	+= arch/mips/basler/excite/
-cflags-$(CONFIG_BASLER_EXCITE)	+= -I$(srctree)/arch/mips/include/asm/mach-excite
-load-$(CONFIG_BASLER_EXCITE)	+= 0x80100000
-
-#
 # LASAT platforms
 #
 core-$(CONFIG_LASAT)		+= arch/mips/lasat/
diff --git a/arch/mips/basler/excite/Kconfig b/arch/mips/basler/excite/Kconfig
deleted file mode 100644
index ba506075608b..000000000000
--- a/arch/mips/basler/excite/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-config BASLER_EXCITE_PROTOTYPE
-	bool "Support for pre-release units"
-	depends on BASLER_EXCITE
-	default n
-	help
-	  Pre-series (prototype) units are different from later ones in
-	  some ways. Select this option if you have one of these. Please
-	  note that a kernel built with this option selected will not be
-	  able to run on normal units.
diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile
deleted file mode 100644
index cff29cf46d03..000000000000
--- a/arch/mips/basler/excite/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for Basler eXcite
-#
-
-obj-$(CONFIG_BASLER_EXCITE)	+= excite_irq.o excite_prom.o excite_setup.o \
-				   excite_device.o excite_procfs.o
-
-obj-m				+= excite_iodev.o
diff --git a/arch/mips/basler/excite/excite_device.c b/arch/mips/basler/excite/excite_device.c
deleted file mode 100644
index e00bc2d7f301..000000000000
--- a/arch/mips/basler/excite/excite_device.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- *  Copyright (C) 2004 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <linux/err.h>
-#include <linux/jiffies.h>
-#include <linux/sched.h>
-#include <asm/types.h>
-#include <asm/rm9k-ocd.h>
-
-#include <excite.h>
-#include <rm9k_eth.h>
-#include <rm9k_wdt.h>
-#include <rm9k_xicap.h>
-#include <excite_nandflash.h>
-
-#include "excite_iodev.h"
-
-#define RM9K_GE_UNIT	0
-#define XICAP_UNIT	0
-#define NAND_UNIT	0
-
-#define DLL_TIMEOUT	3		/* seconds */
-
-
-#define RINIT(__start__, __end__, __name__, __parent__) {	\
-	.name	= __name__ "_0",				\
-	.start	= (__start__),					\
-	.end	= (__end__),					\
-	.flags	= 0,						\
-	.parent	= (__parent__)					\
-}
-
-#define RINIT_IRQ(__irq__, __name__) {	\
-	.name	= __name__ "_0",	\
-	.start	= (__irq__),		\
-	.end	= (__irq__),		\
-	.flags	= IORESOURCE_IRQ,	\
-	.parent	= NULL			\
-}
-
-
-
-enum {
-	slice_xicap,
-	slice_eth
-};
-
-
-
-static struct resource
-	excite_ctr_resource __maybe_unused = {
-		.name		= "GPI counters",
-		.start		= 0,
-		.end		= 5,
-		.flags		= 0,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_gpislice_resource __maybe_unused = {
-		.name		= "GPI slices",
-		.start		= 0,
-		.end		= 1,
-		.flags		= 0,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_mdio_channel_resource __maybe_unused = {
-		.name		= "MDIO channels",
-		.start		= 0,
-		.end		= 1,
-		.flags		= 0,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_fifomem_resource __maybe_unused = {
-		.name		= "FIFO memory",
-		.start		= 0,
-		.end		= 767,
-		.flags		= 0,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_scram_resource __maybe_unused = {
-		.name		= "Scratch RAM",
-		.start		= EXCITE_PHYS_SCRAM,
-		.end		= EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1,
-		.flags		= IORESOURCE_MEM,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_fpga_resource __maybe_unused = {
-		.name		= "System FPGA",
-		.start		= EXCITE_PHYS_FPGA,
-		.end		= EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1,
-		.flags		= IORESOURCE_MEM,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_nand_resource __maybe_unused = {
-		.name		= "NAND flash control",
-		.start		= EXCITE_PHYS_NAND,
-		.end		= EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1,
-		.flags		= IORESOURCE_MEM,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_titan_resource __maybe_unused = {
-		.name		= "TITAN registers",
-		.start		= EXCITE_PHYS_TITAN,
-		.end		= EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1,
-		.flags		= IORESOURCE_MEM,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	};
-
-
-
-static void adjust_resources(struct resource *res, unsigned int n)
-{
-	struct resource *p;
-	const unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM
-				   | IORESOURCE_IRQ | IORESOURCE_DMA;
-
-	for (p = res; p < res + n; p++) {
-		const struct resource * const parent = p->parent;
-		if (parent) {
-			p->start += parent->start;
-			p->end   += parent->start;
-			p->flags =  parent->flags & mask;
-		}
-	}
-}
-
-
-
-#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE)
-static struct resource xicap_rsrc[] = {
-	RINIT(0x4840, 0x486f, XICAP_RESOURCE_FIFO_RX, &excite_titan_resource),
-	RINIT(0x4940, 0x494b, XICAP_RESOURCE_FIFO_TX, &excite_titan_resource),
-	RINIT(0x5040, 0x5127, XICAP_RESOURCE_XDMA, &excite_titan_resource),
-	RINIT(0x1000, 0x112f, XICAP_RESOURCE_PKTPROC, &excite_titan_resource),
-	RINIT(0x1100, 0x110f, XICAP_RESOURCE_PKT_STREAM, &excite_fpga_resource),
-	RINIT(0x0800, 0x0bff, XICAP_RESOURCE_DMADESC, &excite_scram_resource),
-	RINIT(slice_xicap, slice_xicap, XICAP_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
-	RINIT(0x0100, 0x02ff, XICAP_RESOURCE_FIFO_BLK, &excite_fifomem_resource),
-	RINIT_IRQ(TITAN_IRQ,  XICAP_RESOURCE_IRQ)
-};
-
-static struct platform_device xicap_pdev = {
-	.name		= XICAP_NAME,
-	.id		= XICAP_UNIT,
-	.num_resources	= ARRAY_SIZE(xicap_rsrc),
-	.resource	= xicap_rsrc
-};
-
-/*
- * Create a platform device for the GPI port that receives the
- * image data from the embedded camera.
- */
-static int __init xicap_devinit(void)
-{
-	unsigned long tend;
-	u32 reg;
-	int retval;
-
-	adjust_resources(xicap_rsrc, ARRAY_SIZE(xicap_rsrc));
-
-	/* Power up the slice and configure it. */
-	reg = titan_readl(CPTC1R);
-	reg &= ~(0x11100 << slice_xicap);
-	titan_writel(reg, CPTC1R);
-
-	/* Enable slice & DLL. */
-	reg= titan_readl(CPRR);
-	reg &= ~(0x00030003 << (slice_xicap * 2));
-	titan_writel(reg, CPRR);
-
-	/* Wait for DLLs to lock */
-	tend = jiffies + DLL_TIMEOUT * HZ;
-	while (time_before(jiffies, tend)) {
-		if (!(~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))))
-			break;
-		yield();
-	}
-
-	if (~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))) {
-		printk(KERN_ERR "%s: DLL not locked after %u seconds\n",
-		       xicap_pdev.name, DLL_TIMEOUT);
-		retval = -ETIME;
-	} else {
-		/* Register platform device */
-		retval = platform_device_register(&xicap_pdev);
-	}
-
-	return retval;
-}
-
-device_initcall(xicap_devinit);
-#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */
-
-
-
-#if defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE)
-static struct resource wdt_rsrc[] = {
-	RINIT(0, 0, WDT_RESOURCE_COUNTER, &excite_ctr_resource),
-	RINIT(0x0084, 0x008f, WDT_RESOURCE_REGS, &excite_titan_resource),
-	RINIT_IRQ(TITAN_IRQ,  WDT_RESOURCE_IRQ)
-};
-
-static struct platform_device wdt_pdev = {
-	.name		= WDT_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(wdt_rsrc),
-	.resource	= wdt_rsrc
-};
-
-/*
- * Create a platform device for the GPI port that receives the
- * image data from the embedded camera.
- */
-static int __init wdt_devinit(void)
-{
-	adjust_resources(wdt_rsrc, ARRAY_SIZE(wdt_rsrc));
-	return platform_device_register(&wdt_pdev);
-}
-
-device_initcall(wdt_devinit);
-#endif /* defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) */
-
-
-
-static struct resource excite_nandflash_rsrc[] = {
- 	RINIT(0x2000, 0x201f, EXCITE_NANDFLASH_RESOURCE_REGS,  &excite_nand_resource)
-};
-
-static struct platform_device excite_nandflash_pdev = {
-	.name		= "excite_nand",
-	.id		= NAND_UNIT,
-	.num_resources	= ARRAY_SIZE(excite_nandflash_rsrc),
-	.resource	= excite_nandflash_rsrc
-};
-
-/*
- * Create a platform device for the access to the nand-flash
- * port
- */
-static int __init excite_nandflash_devinit(void)
-{
-	adjust_resources(excite_nandflash_rsrc, ARRAY_SIZE(excite_nandflash_rsrc));
-
-        /* nothing to be done here */
-
-        /* Register platform device */
-	return platform_device_register(&excite_nandflash_pdev);
-}
-
-device_initcall(excite_nandflash_devinit);
-
-
-
-static struct resource iodev_rsrc[] = {
-	RINIT_IRQ(FPGA1_IRQ,  IODEV_RESOURCE_IRQ)
-};
-
-static struct platform_device io_pdev = {
-	.name		= IODEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(iodev_rsrc),
-	.resource	= iodev_rsrc
-};
-
-/*
- * Create a platform device for the external I/O ports.
- */
-static int __init io_devinit(void)
-{
-	adjust_resources(iodev_rsrc, ARRAY_SIZE(iodev_rsrc));
-	return platform_device_register(&io_pdev);
-}
-
-device_initcall(io_devinit);
-
-
-
-
-#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE)
-static struct resource rm9k_ge_rsrc[] = {
-	RINIT(0x2200, 0x27ff, RM9K_GE_RESOURCE_MAC, &excite_titan_resource),
-	RINIT(0x1800, 0x1fff, RM9K_GE_RESOURCE_MSTAT, &excite_titan_resource),
-	RINIT(0x2000, 0x212f, RM9K_GE_RESOURCE_PKTPROC, &excite_titan_resource),
-	RINIT(0x5140, 0x5227, RM9K_GE_RESOURCE_XDMA, &excite_titan_resource),
-	RINIT(0x4870, 0x489f, RM9K_GE_RESOURCE_FIFO_RX, &excite_titan_resource),
-	RINIT(0x494c, 0x4957, RM9K_GE_RESOURCE_FIFO_TX, &excite_titan_resource),
-	RINIT(0x0000, 0x007f, RM9K_GE_RESOURCE_FIFOMEM_RX, &excite_fifomem_resource),
-	RINIT(0x0080, 0x00ff, RM9K_GE_RESOURCE_FIFOMEM_TX, &excite_fifomem_resource),
-	RINIT(0x0180, 0x019f, RM9K_GE_RESOURCE_PHY, &excite_titan_resource),
-	RINIT(0x0000, 0x03ff, RM9K_GE_RESOURCE_DMADESC_RX, &excite_scram_resource),
-	RINIT(0x0400, 0x07ff, RM9K_GE_RESOURCE_DMADESC_TX, &excite_scram_resource),
-	RINIT(slice_eth, slice_eth, RM9K_GE_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
-	RINIT(0, 0, RM9K_GE_RESOURCE_MDIO_CHANNEL, &excite_mdio_channel_resource),
-	RINIT_IRQ(TITAN_IRQ,  RM9K_GE_RESOURCE_IRQ_MAIN),
-	RINIT_IRQ(PHY_IRQ, RM9K_GE_RESOURCE_IRQ_PHY)
-};
-
-static struct platform_device rm9k_ge_pdev = {
-	.name		= RM9K_GE_NAME,
-	.id		= RM9K_GE_UNIT,
-	.num_resources	= ARRAY_SIZE(rm9k_ge_rsrc),
-	.resource	= rm9k_ge_rsrc
-};
-
-
-
-/*
- * Create a platform device for the Ethernet port.
- */
-static int __init rm9k_ge_devinit(void)
-{
-	u32 reg;
-
-	adjust_resources(rm9k_ge_rsrc, ARRAY_SIZE(rm9k_ge_rsrc));
-
-	/* Power up the slice and configure it. */
-	reg = titan_readl(CPTC1R);
-	reg &= ~(0x11000 << slice_eth);
-	reg |= 0x100 << slice_eth;
-	titan_writel(reg, CPTC1R);
-
-	/* Take the MAC out of reset, reset the DLLs. */
-	reg = titan_readl(CPRR);
-	reg &= ~(0x00030000 << (slice_eth * 2));
-	reg |= 0x3 << (slice_eth * 2);
-	titan_writel(reg, CPRR);
-
-	return platform_device_register(&rm9k_ge_pdev);
-}
-
-device_initcall(rm9k_ge_devinit);
-#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */
-
-
-
-static int __init excite_setup_devs(void)
-{
-	int res;
-	u32 reg;
-
-	/* Enable xdma and fifo interrupts */
-	reg = titan_readl(0x0050);
-	titan_writel(reg | 0x18000000, 0x0050);
-
-	res = request_resource(&iomem_resource, &excite_titan_resource);
-	if (res)
-		return res;
-	res = request_resource(&iomem_resource, &excite_scram_resource);
-	if (res)
-		return res;
-	res = request_resource(&iomem_resource, &excite_fpga_resource);
-	if (res)
-		return res;
-	res = request_resource(&iomem_resource, &excite_nand_resource);
-	if (res)
-		return res;
-	excite_fpga_resource.flags = excite_fpga_resource.parent->flags &
-				   ( IORESOURCE_IO | IORESOURCE_MEM
-				   | IORESOURCE_IRQ | IORESOURCE_DMA);
-	excite_nand_resource.flags = excite_nand_resource.parent->flags &
-				   ( IORESOURCE_IO | IORESOURCE_MEM
-				   | IORESOURCE_IRQ | IORESOURCE_DMA);
-
-	return 0;
-}
-
-arch_initcall(excite_setup_devs);
-
diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c
deleted file mode 100644
index 733b2420418a..000000000000
--- a/arch/mips/basler/excite/excite_iodev.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- *  Copyright (C) 2005 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/compiler.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/poll.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/miscdevice.h>
-#include <linux/smp_lock.h>
-
-