Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.3

Highlights:
- new SoC: S922X (G12B family, A73/A53 big.LITTLE)
- new board: Hardkernel odroid-N2 (SoC: G12B S922X)
- add/use ethernet PHY interrupt/reset lines
- G12A: add/enable audio, PWM, IR, i2c, SD/eMMC, WiFi, bluetooth, network
- gxbb-vega-s95 board: fix WiFi/BT, enable more peripherals

* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (79 commits)
  arm64: dts: meson: g12a: x96-max: add the Ethernet PHY interrupt line
  arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY interrupt line
  arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line
  arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings
  arm64: dts: meson: g12a: x96-max: fix the Ethernet PHY reset line
  arm64: dts: meson: g12a: sort sdio nodes correctly
  arm64: dts: meson-g12a-x96-max: add sound card
  arm64: dts: meson-g12b-odroid-n2: add sound card
  arm64: dts: meson: sei510: add sound card
  arm64: dts: meson: sei510: add max98357a DAC
  ASoC: meson: add tohdmitx DT bindings
  arm64: dts: meson: g12a: add the GPIO interrupt controller
  arm64: dts: meson-g12a-x96-max: bump bluetooth bus speed to 2Mbaud/s
  arm64: dts: meson-g12a-sei510: bump bluetooth bus speed to 2Mbaud/s
  arm64: dts: meson-g12a-x96-max: add 32k clock to bluetooth node
  arm64: dts: meson-g12a-sei510: add 32k clock to bluetooth node
  arm64: dts: meson-g12a-sei510: Enable Wifi SDIO module
  arm64: dts: meson-g12a-x96-max: Enable Wifi SDIO Module
  arm64: dts: meson-g12a-x96-max: add support for sdcard and emmc
  arm64: dts: meson: g12a: add SDIO controller
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

38 files changed, 3521 insertions, 350 deletions

diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
deleted file mode 100644
index 061f7b98a07f..000000000000
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ /dev/null
@@ -1,142 +0,0 @@
-Amlogic MesonX device tree bindings
--------------------------------------------
-
-Work in progress statement:
-
-Device tree files and bindings applying to Amlogic SoCs and boards are
-considered "unstable". Any Amlogic device tree binding may change at
-any time. Be sure to use a device tree binary and a kernel image
-generated from the same source tree.
-
-Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
-stable binding/ABI.
-
----------------------------------------------------------------
-
-Boards with the Amlogic Meson6 SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,meson6"
-
-Boards with the Amlogic Meson8 SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,meson8";
-
-Boards with the Amlogic Meson8b SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,meson8b";
-
-Boards with the Amlogic Meson8m2 SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,meson8m2";
-
-Boards with the Amlogic Meson GXBaby SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,meson-gxbb";
-
-Boards with the Amlogic Meson GXL S905X SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,s905x", "amlogic,meson-gxl";
-
-Boards with the Amlogic Meson GXL S905D SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,s905d", "amlogic,meson-gxl";
-
-Boards with the Amlogic Meson GXL S805X SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,s805x", "amlogic,meson-gxl";
-
-Boards with the Amlogic Meson GXL S905W SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,s905w", "amlogic,meson-gxl";
-
-Boards with the Amlogic Meson GXM S912 SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,s912", "amlogic,meson-gxm";
-
-Boards with the Amlogic Meson AXG A113D SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,a113d", "amlogic,meson-axg";
-
-Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,g12a";
-
-Board compatible values (alphabetically, grouped by SoC):
-
-  - "geniatech,atv1200" (Meson6)
-
-  - "minix,neo-x8" (Meson8)
-
-  - "endless,ec100" (Meson8b)
-  - "hardkernel,odroid-c1" (Meson8b)
-  - "tronfy,mxq" (Meson8b)
-
-  - "tronsmart,mxiii-plus" (Meson8m2)
-
-  - "amlogic,p200" (Meson gxbb)
-  - "amlogic,p201" (Meson gxbb)
-  - "friendlyarm,nanopi-k2" (Meson gxbb)
-  - "hardkernel,odroid-c2" (Meson gxbb)
-  - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
-  - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
-  - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
-  - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
-  - "wetek,hub" (Meson gxbb)
-  - "wetek,play2" (Meson gxbb)
-
-  - "amlogic,p212" (Meson gxl s905x)
-  - "hwacom,amazetv" (Meson gxl s905x)
-  - "khadas,vim" (Meson gxl s905x)
-  - "libretech,cc" (Meson gxl s905x)
-
-  - "amlogic,p230" (Meson gxl s905d)
-  - "amlogic,p231" (Meson gxl s905d)
-  - "phicomm,n1" (Meson gxl s905d)
-
-  - "amlogic,p241" (Meson gxl s805x)
-  - "libretech,aml-s805x-ac" (Meson gxl s805x)
-
-  - "amlogic,p281" (Meson gxl s905w)
-  - "oranth,tx3-mini" (Meson gxl s905w)
-
-  - "amlogic,q200" (Meson gxm s912)
-  - "amlogic,q201" (Meson gxm s912)
-  - "khadas,vim2" (Meson gxm s912)
-  - "kingnovel,r-box-pro" (Meson gxm S912)
-  - "nexbox,a1" (Meson gxm s912)
-  - "tronsmart,vega-s96" (Meson gxm s912)
-
-  - "amlogic,s400" (Meson axg a113d)
-
-  - "amlogic,u200" (Meson g12a s905d2)
-  - "amediatech,x96-max" (Meson g12a s905x2)
-  - "seirobotics,sei510" (Meson g12a s905x2)
-
-Amlogic Meson Firmware registers Interface
-------------------------------------------
-
-The Meson SoCs have a register bank with status and data shared with the
-secure firmware.
-
-Required properties:
- - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
-
-Properties should indentify components of this register interface :
-
-Meson GX SoC Information
-------------------------
-A firmware register encodes the SoC type, package and revision information on
-the Meson GX SoCs.
-If present, the following property should be added :
-
-Optional properties:
-  - amlogic,has-chip-id: If present, the interface gives the current SoC version.
-
-Example
--------
-
-ao-secure@140 {
-	compatible = "amlogic,meson-gx-ao-secure", "syscon";
-	reg = <0x0 0x140 0x0 0x140>;
-	amlogic,has-chip-id;
-};
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
new file mode 100644
index 000000000000..325c6fd3566d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/amlogic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic MesonX device tree bindings
+
+maintainers:
+  - Kevin Hilman <khilman@baylibre.com>
+
+description: |+
+  Work in progress statement:
+
+  Device tree files and bindings applying to Amlogic SoCs and boards are
+  considered "unstable". Any Amlogic device tree binding may change at
+  any time. Be sure to use a device tree binary and a kernel image
+  generated from the same source tree.
+
+  Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
+  stable binding/ABI.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Boards with the Amlogic Meson6 SoC
+        items:
+          - enum:
+              - geniatech,atv1200
+          - const: amlogic,meson6
+
+      - description: Boards with the Amlogic Meson8 SoC
+        items:
+          - enum:
+              - minix,neo-x8
+          - const: amlogic,meson8
+
+      - description: Boards with the Amlogic Meson8m2 SoC
+        items:
+          - enum:
+              - tronsmart,mxiii-plus
+          - const: amlogic,meson8m2
+
+      - description: Boards with the Amlogic Meson8b SoC
+        items:
+          - enum:
+              - endless,ec100
+              - hardkernel,odroid-c1
+              - tronfy,mxq
+          - const: amlogic,meson8b
+
+      - description: Boards with the Amlogic Meson GXBaby SoC
+        items:
+          - enum:
+              - amlogic,p200
+              - amlogic,p201
+              - friendlyarm,nanopi-k2
+              - hardkernel,odroid-c2
+              - nexbox,a95x
+              - wetek,hub
+              - wetek,play2
+          - const: amlogic,meson-gxbb
+
+      - description: Tronsmart Vega S95 devices
+        items:
+          - enum:
+              - tronsmart,vega-s95-pro
+              - tronsmart,vega-s95-meta
+              - tronsmart,vega-s95-telos
+          - const: tronsmart,vega-s95
+          - const: amlogic,meson-gxbb
+
+      - description: Boards with the Amlogic Meson GXL S805X SoC
+        items:
+          - enum:
+              - amlogic,p241
+              - libretech,aml-s805x-ac
+          - const: amlogic,s805x
+          - const: amlogic,meson-gxl
+
+      - description: Boards with the Amlogic Meson GXL S905W SoC
+        items:
+          - enum:
+              - amlogic,p281
+              - oranth,tx3-mini
+          - const: amlogic,s905w
+          - const: amlogic,meson-gxl
+
+      - description: Boards with the Amlogic Meson GXL S905X SoC
+        items:
+          - enum:
+              - amediatech,x96-max
+              - amlogic,p212
+              - hwacom,amazetv
+              - khadas,vim
+              - libretech,cc
+              - nexbox,a95x
+              - seirobotics,sei510
+          - const: amlogic,s905x
+          - const: amlogic,meson-gxl
+
+      - description: Boards with the Amlogic Meson GXL S905D SoC
+        items:
+          - enum:
+              - amlogic,p230
+              - amlogic,p231
+              - phicomm,n1
+          - const: amlogic,s905d
+          - const: amlogic,meson-gxl
+
+      - description: Boards with the Amlogic Meson GXM S912 SoC
+        items:
+          - enum:
+              - amlogic,q200
+              - amlogic,q201
+              - khadas,vim2
+              - kingnovel,r-box-pro
+              - nexbox,a1
+              - tronsmart,vega-s96
+          - const: amlogic,s912
+          - const: amlogic,meson-gxm
+
+      - description: Boards with the Amlogic Meson AXG A113D SoC
+        items:
+          - enum:
+              - amlogic,s400
+          - const: amlogic,a113d
+          - const: amlogic,meson-axg
+
+      - description: Boards with the Amlogic Meson G12A S905D2 SoC
+        items:
+          - enum:
+              - amlogic,u200
+          - const: amlogic,g12a
+
+      - description: Boards with the Amlogic Meson G12B S922X SoC
+        items:
+          - enum:
+              - hardkernel,odroid-n2
+          - const: amlogic,g12b
+
+...
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
new file mode 100644
index 000000000000..c67d9f48fb91
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
@@ -0,0 +1,28 @@
+Amlogic Meson Firmware registers Interface
+------------------------------------------
+
+The Meson SoCs have a register bank with status and data shared with the
+secure firmware.
+
+Required properties:
+ - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
+
+Properties should indentify components of this register interface :
+
+Meson GX SoC Information
+------------------------
+A firmware register encodes the SoC type, package and revision information on
+the Meson GX SoCs.
+If present, the following property should be added :
+
+Optional properties:
+  - amlogic,has-chip-id: If present, the interface gives the current SoC version.
+
+Example
+-------
+
+ao-secure@140 {
+	compatible = "amlogic,meson-gx-ao-secure", "syscon";
+	reg = <0x0 0x140 0x0 0x140>;
+	amlogic,has-chip-id;
+};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt b/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt
new file mode 100644
index 000000000000..aa6c35570d31
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt
@@ -0,0 +1,55 @@
+* Amlogic HDMI Tx control glue
+
+Required properties:
+- compatible: "amlogic,g12a-tohdmitx"
+- reg: physical base address of the controller and length of memory
+       mapped region.
+- #sound-dai-cells: should be 1.
+
+Example on the S905X2 SoC:
+
+tohdmitx: audio-controller@744 {
+	compatible = "amlogic,g12a-tohdmitx";
+	reg = <0x0 0x744 0x0 0x4>;
+	#sound-dai-cells = <1>;
+};
+
+Example of an 'amlogic,axg-sound-card':
+
+sound {
+	compatible = "amlogic,axg-sound-card";
+
+[...]
+
+	dai-link-x {
+		sound-dai = <&tdmif_a>;
+		dai-format = "i2s";
+		dai-tdm-slot-tx-mask-0 = <1 1>;
+
+		codec-0 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+		};
+
+		codec-1 {
+			sound-dai = <&external_dac>;
+		};
+	};
+
+	dai-link-y {
+		sound-dai = <&tdmif_c>;
+		dai-format = "i2s";
+		dai-tdm-slot-tx-mask-0 = <1 1>;
+
+		codec {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+		};
+	};
+
+	dai-link-z {
+		sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+		codec {
+			sound-dai = <&hdmi_tx>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index e129c03ced14..07b861fe5fa5 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 75fe1a2c49d0..4cd2d5951822 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -482,8 +482,8 @@
 
 /* emmc storage */
 &sd_emmc_c {
-	status = "disabled";
-	pinctrl-0 = <&emmc_pins>;
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 34704fecf756..6219337033a0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -171,7 +171,9 @@
 		ranges;
 
 		ethmac: ethernet@ff3f0000 {
-			compatible = "amlogic,meson-axg-dwmac", "snps,dwmac";
+			compatible = "amlogic,meson-axg-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
 			reg = <0x0 0xff3f0000 0x0 0x10000
 			       0x0 0xff634540 0x0 0x8>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
@@ -299,7 +301,7 @@
 				};
 
 				emmc_pins: emmc {
-					mux {
+					mux-0 {
 						groups = "emmc_nand_d0",
 							 "emmc_nand_d1",
 							 "emmc_nand_d2",
@@ -308,14 +310,26 @@
 							 "emmc_nand_d5",
 							 "emmc_nand_d6",
 							 "emmc_nand_d7",
-							 "emmc_clk",
-							 "emmc_cmd",
-							 "emmc_ds";
+							 "emmc_cmd";
+						function = "emmc";
+						bias-pull-up;
+					};
+
+					mux-1 {
+						groups = "emmc_clk";
 						function = "emmc";
 						bias-disable;
 					};
 				};
 
+				emmc_ds_pins: emmc_ds {
+					mux {
+						groups = "emmc_ds";
+						function = "emmc";
+						bias-pull-down;
+					};
+				};
+
 				emmc_clk_gate_pins: emmc_clk_gate {
 					mux {
 						groups = "BOOT_8";
@@ -559,13 +573,18 @@
 				};
 
 				sdio_pins: sdio {
-					mux {
+					mux-0 {
 						groups = "sdio_d0",
 							 "sdio_d1",
 							 "sdio_d2",
 							 "sdio_d3",
-							 "sdio_cmd",
-							 "sdio_clk";
+							 "sdio_cmd";
+						function = "sdio";
+						bias-pull-up;
+					};
+
+					mux-1 {
+						groups = "sdio_clk";
 						function = "sdio";
 						bias-disable;
 					};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 34b40587e5ef..c7a87368850b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -9,15 +9,12 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
 	compatible = "seirobotics,sei510", "amlogic,g12a";
 	model = "SEI Robotics SEI510";
 
-	aliases {
-		serial0 = &uart_AO;
-	};
-
 	adc_keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 0>;
@@ -31,13 +28,25 @@
 		};
 	};
 
-	ao_5v: regulator-ao_5v {
-		compatible = "regulator-fixed";
-		regulator-name = "AO_5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_in>;
-		regulator-always-on;
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	mono_dac: audio-codec-0 {
+		compatible = "maxim,max98357a";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "U16";
+		sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
+	};
+
+	dmics: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+		status = "okay";
+		sound-name-prefix = "MIC";
 	};
 
 	chosen {
@@ -54,21 +63,9 @@
 		};
 	};
 
-	dc_in: regulator-dc_in {
-		compatible = "regulator-fixed";
-		regulator-name = "DC_IN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	emmc_1v8: regulator-emmc_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "EMMC_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
 	};
 
 	hdmi-connector {
@@ -87,12 +84,30 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
 	};
 
 	vddao_3v3: regulator-vddao_3v3 {
@@ -122,6 +137,146 @@
 		vin-supply = <&vddao_3v3>;
 		regulator-always-on;
 	};
+
+	reserved-memory {
+		/* TEE Reserved Memory */
+		bl32_reserved: bl32@5000000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "G12A-SEI510";
+		audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
+				 <&tdmin_a>, <&tdmin_b>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TODDR_A IN 4", "PDM Capture",
+				"TODDR_B IN 4", "PDM Capture",
+				"TODDR_C IN 4", "PDM Capture",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TDMIN_B IN 0", "TDM_A Capture",
+				"TDMIN_B IN 3", "TDM_A Loopback",
+				"TDMIN_A IN 1", "TDM_B Capture",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* internal speaker interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&mono_dac>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-7 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec@0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* internal digital mics */
+		dai-link-8 {
+			sound-dai = <&pdm>;
+
+			codec {
+				sound-dai = <&dmics>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-9 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
 };
 
 &cec_AO {
@@ -138,27 +293,32 @@
 	hdmi-phandle = <&hdmi_tx>;
 };
 
+&clkc_audio {
+	status = "okay";
+};
+
 &cvbs_vdac_port {
 	cvbs_vdac_out: endpoint {
 		remote-endpoint = <&cvbs_connector_in>;
 	};
 };
 
-&saradc {
+&ethmac {
 	status = "okay";
-	vref-supply = <&vddio_ao1v8>;
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
 };
 
-&uart_A {
+&frddr_a {
 	status = "okay";
-	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
+};
 
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
-	};
+&frddr_b {
+	status = "okay";
+};