Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86

* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (78 commits)
  x86: fix RTC lockdep warning: potential hardirq recursion
  x86: cpa, micro-optimization
  x86: cpa, clean up code flow
  x86: cpa, eliminate CPA_ enum
  x86: cpa, cleanups
  x86: implement gbpages support in change_page_attr()
  x86: support gbpages in pagetable dump
  x86: add gbpages support to lookup_address
  x86: add pgtable accessor functions for gbpages
  x86: add PUD_PAGE_SIZE
  x86: add feature macros for the gbpages cpuid bit
  x86: switch direct mapping setup over to set_pte
  x86: fix page-present check in cpa_flush_range
  x86: remove cpa warning
  x86: remove now unused clear_kernel_mapping
  x86: switch pci-gart over to using set_memory_np() instead of clear_kernel_mapping()
  x86: cpa selftest, skip non present entries
  x86: CPA fix pagetable split
  x86: rename LARGE_PAGE_SIZE to PMD_PAGE_SIZE
  x86: cpa, fix lookup_address
  ...

68 files changed, 821 insertions, 814 deletions

diff --git a/Documentation/x86_64/00-INDEX b/Documentation/x86_64/00-INDEX
new file mode 100644
index 000000000000..92fc20ab5f0e
--- /dev/null
+++ b/Documentation/x86_64/00-INDEX
@@ -0,0 +1,16 @@
+00-INDEX
+	- This file
+boot-options.txt
+	- AMD64-specific boot options.
+cpu-hotplug-spec
+	- Firmware support for CPU hotplug under Linux/x86-64
+fake-numa-for-cpusets
+	- Using numa=fake and CPUSets for Resource Management
+kernel-stacks
+	- Context-specific per-processor interrupt stacks.
+machinecheck
+	- Configurable sysfs parameters for the x86-64 machine check code.
+mm.txt
+	- Memory layout of x86-64 (4 level page tables, 46 bits physical).
+uefi.txt
+	- Booting Linux via Unified Extensible Firmware Interface.
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 99af1272ab1d..59eef1c7fdaa 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -306,6 +306,7 @@ config X86_RDC321X
 	select M486
 	select X86_REBOOTFIXUPS
 	select GENERIC_GPIO
+	select LEDS_CLASS
 	select LEDS_GPIO
 	help
 	  This option is needed for RDC R-321x system-on-chip, also known
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 8978e98bed5b..364865b1b08d 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -92,7 +92,6 @@ KBUILD_AFLAGS += $(cfi) $(cfi-sigframe)
 KBUILD_CFLAGS += $(cfi) $(cfi-sigframe)
 
 LDFLAGS := -m elf_$(UTS_MACHINE)
-OBJCOPYFLAGS := -O binary -R .note -R .comment -S
 
 # Speed up the build
 KBUILD_CFLAGS += -pipe
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 349b81a39c40..f88458e83ef0 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -26,7 +26,7 @@ SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
 #RAMDISK := -DRAMDISK=512
 
 targets		:= vmlinux.bin setup.bin setup.elf zImage bzImage
-subdir- 	:= compressed
+subdir-		:= compressed
 
 setup-y		+= a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o
 setup-y		+= header.o main.o mca.o memory.o pm.o pmjump.o
@@ -43,9 +43,17 @@ setup-y		+= video-vesa.o
 setup-y		+= video-bios.o
 
 targets		+= $(setup-y)
-hostprogs-y	:= tools/build
+hostprogs-y	:= mkcpustr tools/build
 
-HOSTCFLAGS_build.o := $(LINUXINCLUDE)
+HOST_EXTRACFLAGS += $(LINUXINCLUDE)
+
+$(obj)/cpu.o: $(obj)/cpustr.h
+
+quiet_cmd_cpustr = CPUSTR  $@
+      cmd_cpustr = $(obj)/mkcpustr > $@
+targets		+= cpustr.h
+$(obj)/cpustr.h: $(obj)/mkcpustr FORCE
+	$(call if_changed,cpustr)
 
 # ---------------------------------------------------------------------------
 
@@ -80,6 +88,7 @@ $(obj)/zImage $(obj)/bzImage: $(obj)/setup.bin \
 	$(call if_changed,image)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 
+OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
 $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
 
@@ -90,7 +99,6 @@ $(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
 	$(call if_changed,ld)
 
 OBJCOPYFLAGS_setup.bin	:= -O binary
-
 $(obj)/setup.bin: $(obj)/setup.elf FORCE
 	$(call if_changed,objcopy)
 
@@ -98,7 +106,7 @@ $(obj)/compressed/vmlinux: FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
 
 # Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
-FDARGS = 
+FDARGS =
 # Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel
 FDINITRD =
 
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index fe24ceabd909..d2b9f3bb87c0 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -22,6 +22,7 @@ $(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $
 	$(call if_changed,ld)
 	@:
 
+OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 1ccb38a7f0d2..e8657b98c902 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -80,8 +80,8 @@ startup_32:
 
 #ifdef CONFIG_RELOCATABLE
 	movl	%ebp, %ebx
-	addl	$(LARGE_PAGE_SIZE -1), %ebx
-	andl	$LARGE_PAGE_MASK, %ebx
+	addl	$(PMD_PAGE_SIZE -1), %ebx
+	andl	$PMD_PAGE_MASK, %ebx
 #else
 	movl	$CONFIG_PHYSICAL_START, %ebx
 #endif
@@ -220,8 +220,8 @@ ENTRY(startup_64)
 	/* Start with the delta to where the kernel will run at. */
 #ifdef CONFIG_RELOCATABLE
 	leaq	startup_32(%rip) /* - $startup_32 */, %rbp
-	addq	$(LARGE_PAGE_SIZE - 1), %rbp
-	andq	$LARGE_PAGE_MASK, %rbp
+	addq	$(PMD_PAGE_SIZE - 1), %rbp
+	andq	$PMD_PAGE_MASK, %rbp
 	movq	%rbp, %rbx
 #else
 	movq	$CONFIG_PHYSICAL_START, %rbp
diff --git a/arch/x86/boot/cpu.c b/arch/x86/boot/cpu.c
index 2a5c32da5852..00e19edd852c 100644
--- a/arch/x86/boot/cpu.c
+++ b/arch/x86/boot/cpu.c
@@ -1,7 +1,7 @@
 /* -*- linux-c -*- ------------------------------------------------------- *
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
- *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2007-2008 rPath, Inc. - All Rights Reserved
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -9,7 +9,7 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/cpu.c
+ * arch/x86/boot/cpu.c
  *
  * Check for obligatory CPU features and abort if the features are not
  * present.
@@ -19,6 +19,8 @@
 #include "bitops.h"
 #include <asm/cpufeature.h>
 
+#include "cpustr.h"
+
 static char *cpu_name(int level)
 {
 	static char buf[6];
@@ -35,6 +37,7 @@ int validate_cpu(void)
 {
 	u32 *err_flags;
 	int cpu_level, req_level;
+	const unsigned char *msg_strs;
 
 	check_cpu(&cpu_level, &req_level, &err_flags);
 
@@ -51,13 +54,26 @@ int validate_cpu(void)
 		puts("This kernel requires the following features "
 		     "not present on the CPU:\n");
 
+		msg_strs = (const unsigned char *)x86_cap_strs;
+
 		for (i = 0; i < NCAPINTS; i++) {
 			u32 e = err_flags[i];
 
 			for (j = 0; j < 32; j++) {
-				if (e & 1)
-					printf("%d:%d ", i, j);
-
+				int n = (i << 5)+j;
+				if (*msg_strs < n) {
+					/* Skip to the next string */
+					do {
+						msg_strs++;
+					} while (*msg_strs);
+					msg_strs++;
+				}
+				if (e & 1) {
+					if (*msg_strs == n && msg_strs[1])
+						printf("%s ", msg_strs+1);
+					else
+						printf("%d:%d ", i, j);
+				}
 				e >>= 1;
 			}
 		}
diff --git a/arch/x86/boot/mkcpustr.c b/arch/x86/boot/mkcpustr.c
new file mode 100644
index 000000000000..bbe76953bae9
--- /dev/null
+++ b/arch/x86/boot/mkcpustr.c
@@ -0,0 +1,49 @@
+/* ----------------------------------------------------------------------- *
+ *
+ *   Copyright 2008 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2 or (at your
+ *   option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * This is a host program to preprocess the CPU strings into a
+ * compact format suitable for the setup code.
+ */
+
+#include <stdio.h>
+
+#include "../kernel/cpu/feature_names.c"
+
+#if NCAPFLAGS > 8
+# error "Need to adjust the boot code handling of CPUID strings"
+#endif
+
+int main(void)
+{
+	int i;
+	const char *str;
+
+	printf("static const char x86_cap_strs[] = \n");
+
+	for (i = 0; i < NCAPINTS*32; i++) {
+		str = x86_cap_flags[i];
+
+		if (i == NCAPINTS*32-1) {
+			/* The last entry must be unconditional; this
+			   also consumes the compiler-added null character */
+			if (!str)
+				str = "";
+			printf("\t\"\\x%02x\"\"%s\"\n", i, str);
+		} else if (str) {
+			printf("#if REQUIRED_MASK%d & (1 << %d)\n"
+			       "\t\"\\x%02x\"\"%s\\0\"\n"
+			       "#endif\n",
+			       i >> 5, i & 31, i, str);
+		}
+	}
+	printf("\t;\n");
+	return 0;
+}
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 6f813009d44b..21dc1a061bf1 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -37,7 +37,8 @@ obj-$(CONFIG_X86_MSR)		+= msr.o
 obj-$(CONFIG_X86_CPUID)		+= cpuid.o
 obj-$(CONFIG_MICROCODE)		+= microcode.o
 obj-$(CONFIG_PCI)		+= early-quirks.o
-obj-$(CONFIG_APM)		+= apm_32.o
+apm-y				:= apm_32.o
+obj-$(CONFIG_APM)		+= apm.o
 obj-$(CONFIG_X86_SMP)		+= smp_$(BITS).o smpboot_$(BITS).o tsc_sync.o
 obj-$(CONFIG_X86_32_SMP)	+= smpcommon_32.o
 obj-$(CONFIG_X86_64_SMP)	+= smp_64.o smpboot_64.o tsc_sync.o
@@ -74,7 +75,8 @@ ifdef CONFIG_INPUT_PCSPKR
 obj-y				+= pcspeaker.o
 endif
 
-obj-$(CONFIG_SCx200)		+= scx200_32.o
+obj-$(CONFIG_SCx200)		+= scx200.o
+scx200-y			+= scx200_32.o
 
 ###
 # 64 bit specific files
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index cfdb2f3bd763..a0c4d7c5dbd7 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-y			:= intel_cacheinfo.o addon_cpuid_features.o
+obj-y			+= feature_names.o
 
 obj-$(CONFIG_X86_32)	+= common.o proc.o bugs.o
 obj-$(CONFIG_X86_32)	+= amd.o
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index b7b2142b58e7..d9313d9adced 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -623,16 +623,6 @@ cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
  * They will insert themselves into the cpu_devs structure.
  * Then, when cpu_init() is called, we can just iterate over that array.
  */
-
-extern int intel_cpu_init(void);
-extern int cyrix_init_cpu(void);
-extern int nsc_init_cpu(void);
-extern int amd_init_cpu(void);
-extern int centaur_init_cpu(void);
-extern int transmeta_init_cpu(void);
-extern int nexgen_init_cpu(void);
-extern int umc_init_cpu(void);
-
 void __init early_cpu_init(void)
 {
 	intel_cpu_init();
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index ad6527a5beb1..e0b38c33d842 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -27,3 +27,12 @@ extern void display_cacheinfo(struct cpuinfo_x86 *c);
 extern void early_init_intel(struct cpuinfo_x86 *c);
 extern void early_init_amd(struct cpuinfo_x86 *c);
 
+/* Specific CPU type init functions */
+int intel_cpu_init(void);
+int amd_init_cpu(void);
+int cyrix_init_cpu(void);
+int nsc_init_cpu(void);
+int centaur_init_cpu(void);
+int transmeta_init_cpu(void);
+int nexgen_init_cpu(void);
+int umc_init_cpu(void);
diff --git a/arch/x86/kernel/cpu/feature_names.c b/arch/x86/kernel/cpu/feature_names.c
new file mode 100644
index 000000000000..ee975ac6bbcb
--- /dev/null
+++ b/arch/x86/kernel/cpu/feature_names.c
@@ -0,0 +1,83 @@
+/*
+ * Strings for the various x86 capability flags.
+ *
+ * This file must not contain any executable code.
+ */
+
+#include "asm/cpufeature.h"
+
+/*
+ * These flag bits must match the definitions in <asm/cpufeature.h>.
+ * NULL means this bit is undefined or reserved; either way it doesn't
+ * have meaning as far as Linux is concerned.  Note that it's important
+ * to realize there is a difference between this table and CPUID -- if
+ * applications want to get the raw CPUID data, they should access
+ * /dev/cpu/<cpu_nr>/cpuid instead.
+ */
+const char * const x86_cap_flags[NCAPINTS*32] = {
+	/* Intel-defined */
+	"fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
+	"cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
+	"pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
+	"fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
+
+	/* AMD-defined */
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
+	NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL,
+	NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm",
+	"3dnowext", "3dnow",
+
+	/* Transmeta-defined */
+	"recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+	/* Other (Linux-defined) */
+	"cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
+	NULL, NULL, NULL, NULL,
+	"constant_tsc", "up", NULL, "arch_perfmon",
+	"pebs", "bts", NULL, NULL,
+	"rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+	/* Intel-defined (#2) */
+	"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
+	"tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
+	NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt",
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+	/* VIA/Cyrix/Centaur-defined */
+	NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en",
+	"ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL,
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+	/* AMD-defined (#2) */
+	"lahf_lm", "cmp_legacy", "svm", "extapic",
+	"cr8_legacy", "abm", "sse4a", "misalignsse",
+	"3dnowprefetch", "osvw", "ibs", "sse5",
+	"skinit", "wdt", NULL, NULL,
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+	/* Auxiliary (Linux-defined) */
+	"ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+};
+
+const char *const x86_power_flags[32] = {
+	"ts",	/* temperature sensor */
+	"fid",  /* frequency id control */
+	"vid",  /* voltage id control */
+	"ttp",  /* thermal trip */
+	"tm",
+	"stc",
+	"100mhzsteps",
+	"hwpstate",
+	"",	/* tsc invariant mapped to constant_tsc */
+		/* nothing */
+};
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index d1c372b018db..fae31ce747bd 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -13,6 +13,7 @@
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
 #include <asm/ds.h>
+#include <asm/bugs.h>
 
 #include "cpu.h"
 
diff --git a/arch/x86/kernel/cpu/mtrr/cyrix.c b/arch/x86/kernel/cpu/mtrr/cyrix.c
index 8e139c70f888..ff14c320040c 100644
--- a/arch/x86/kernel/cpu/mtrr/cyrix.c
+++ b/arch/x86/kernel/cpu/mtrr/cyrix.c
@@ -7,8 +7,6 @@
 #include <asm/processor-flags.h>
 #include "mtrr.h"
 
-int arr3_protected;
-
 static void
 cyrix_get_arr(unsigned int reg, unsigned long *base,
 	      unsigned long *size, mtrr_type * type)
@@ -99,8 +97,6 @@ cyrix_get_free_region(unsigned long base, unsigned long size, int replace_reg)
 	case 4:
 		return replace_reg;
 	case 3:
-		if (arr3_protected)
-			break;
 	case 2:
 	case 1:
 	case 0:
@@ -115,8 +111,6 @@ cyrix_get_free_region(unsigned long base, unsigned long size, int replace_reg)
 	} else {
 		for (i = 0; i < 7; i++) {
 			cyrix_get_arr(i, &lbase, &lsize, &ltype);
-			if ((i == 3) && arr3_protected)
-				continue;
 			if (lsize == 0)
 				return i;
 		}
@@ -260,107 +254,6 @@ static void cyrix_set_all(void)
 	post_set();
 }
 
-#if 0
-/*
- * On Cyrix 6x86(MX) and M II the ARR3 is special: it has connection
- * with the SMM (System Management Mode) mode. So we need the following:
- * Check whether SMI_LOCK (CCR3 bit 0) is set
- *   if it is set, write a warning message: ARR3 cannot be changed!
- *     (it cannot be changed until the next processor reset)
- *   if it is reset, then we can change it, set all the needed bits:
- *   - disable access to SMM memory through ARR3 range (CCR1 bit 7 reset)
- *   - disable access to SMM memory (CCR1 bit 2 reset)
- *   - disable SMM mode (CCR1 bit 1 reset)
- *   - disable write protection of ARR3 (CCR6 bit 1 reset)
- *   - (maybe) disable ARR3
- * Just to be sure, we enable ARR usage by the processor (CCR5 bit 5 set)
- */
-static void __init
-cyrix_arr_init(void)
-{
-	struct set_mtrr_context ctxt;
-	unsigned char ccr[7];
-	int ccrc[7] = { 0, 0, 0, 0, 0, 0, 0 };
-#ifdef CONFIG_SMP
-	int i;
-#endif
-
-	/* flush cache and enable MAPEN */
-	set_mtrr_prepare_save(&ctxt);
-	set_mtrr_cache_disable(&ctxt);
-
-	/* Save all CCRs locally */
-	ccr[0] = getCx86(CX86_CCR0);
-	ccr[1] = getCx86(CX86_CCR1);
-	ccr[2] = getCx86(CX86_CCR2);
-	ccr[3] = ctxt.ccr3;
-	ccr[4] = getCx86(CX86_CCR4);
-	ccr[5] = getCx86(CX86_CCR5);
-	ccr[6] = getCx86(CX86_CCR6);
-
-	if (ccr[3] & 1) {
-		ccrc[3] = 1;
-		arr3_protected = 1;
-	} else {
-		/* Disable SMM mode (bit 1), access to SMM memory (bit 2) and
-		 * access to SMM memory through ARR3 (bit 7).
-		 */
-		if (ccr[1] & 0x80) {
-			ccr[1] &= 0x7f;
-			ccrc[1] |= 0x80;
-		}
-		if (ccr[1] & 0x04) {
-			ccr[1] &= 0xfb;
-			ccrc[1] |= 0x04;
-		}
-		if (ccr[1] & 0x02) {
-			ccr[1] &= 0xfd;
-			ccrc[1] |= 0x02;
-		}
-		arr3_protected = 0;
-		if (ccr[6] & 0x02) {
-			ccr[6] &= 0xfd;
-			ccrc[6] = 1;	/* Disable write protection of ARR3 */
-			setCx86(CX86_CCR6, ccr[6]);
-		}
-		/* Disable ARR3. This is safe now that we disabled SMM. */
-		/* cyrix_set_arr_up (3, 0, 0, 0, FALSE); */
-	}
-	/* If we changed CCR1 in memory, change it in the processor, too. */
-	if (ccrc[1])
-		setCx86(CX86_CCR1, ccr[1]);
-
-	/* Enable ARR usage by the processor */
-	if (!(ccr[5] & 0x20)) {
-		ccr[5] |= 0x20;
-		ccrc[5] = 1;