diff options
author | Arnd Bergmann <arnd@arndb.de> | 2020-05-21 15:51:39 +0200 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2020-05-21 15:51:40 +0200 |
commit | ca6bc7a19241459a77c148ea28fac1632b363763 (patch) | |
tree | 5a5743b1cf103d4d4d6a39e1f9b152a652739155 | |
parent | c380981efbcdba99b876e72eb3d88a8641180a5f (diff) | |
parent | c9ed436fd69b296001fccaa8469f329be3a12a96 (diff) |
Merge tag 'samsung-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.8
1. Add DTS for Exynos4210-based Samsung Galaxy S2 (GT-I9100)
mobile phone,
2. Enable WiFi and Bluetooth in multiple boards,
3. Add new features to S5Pv210-based Aries family of mobile phones
(e.g. Samsung Galaxy S): necessary configuration for suspend, audio
support, USB mux, touch keys, panel, i2c-gpio adapters, FM radio, ADC,
4. Many minor fixes (e.g. GPIO polarity, interrupts).
* tag 'samsung-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (29 commits)
ARM: dts: s5pv210: Set MAX8998 GPIO pulls on Aries boards
ARM: dts: s5pv210: Correct FIMC definitions
ARM: dts: s5pv210: Assign clocks to MMC devices on Aries boards
ARM: dts: s5pv210: Enable ADC on Aries boards
ARM: dts: s5pv210: Add an ADC node
ARM: dts: s5pv210: Disable pull for vibrator enable GPIO on Aries boards
ARM: dts: s5pv210: Add si470x FM radio to Galaxy S
ARM: dts: s5pv210: Add remaining i2c-gpio adapters to Aries boards
ARM: dts: s5pv210: Add panel support to Aries boards
ARM: dts: s5pv210: Add touchkey support to Aries boards
ARM: dts: s5pv210: Add FSA9480 support to Aries boards
ARM: dts: s5pv210: Add WM8994 support to Aries boards
ARM: dts: s5pv210: Disable pulls on GPIO I2C adapters for Aries
ARM: dts: s5pv210: Set keep-power-in-suspend for SDHCI1 on Aries
ARM: dts: s5pv210: Correct gpi pinctrl node name
ARM: dts: s5pv210: Add sleep GPIO configuration for Galaxy S
ARM: dts: s5pv210: Add sleep GPIO configuration for Fascinate4G
ARM: dts: s5pv210: Add helper define for sleep gpio config
ARM: dts: exynos: Enable WLAN support for the UniversalC210 board
ARM: dts: exynos: Enable WLAN support for the Rinato board
...
Link: https://lore.kernel.org/r/20200512122922.5700-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
19 files changed, 1820 insertions, 74 deletions
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index 63acd57c4799..eb92f9eefaba 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -52,6 +52,7 @@ properties: items: - enum: - insignal,origen # Insignal Origen + - samsung,i9100 # Samsung Galaxy S2 (GT-I9100) - samsung,smdkv310 # Samsung SMDKV310 eval - samsung,trats # Samsung Tizen Reference - samsung,universal_c210 # Samsung C210 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 4b5828d834f3..14e0602dd622 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -181,6 +181,7 @@ dtb-$(CONFIG_ARCH_EXYNOS3) += \ exynos3250-monk.dtb \ exynos3250-rinato.dtb dtb-$(CONFIG_ARCH_EXYNOS4) += \ + exynos4210-i9100.dtb \ exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 248bd372fe70..ca29d7ed8216 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -57,7 +57,8 @@ i2c_max77836: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 86c26a4edfd7..aba8350cfdaf 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -50,9 +50,15 @@ }; }; + wlan_pwrseq: mshc1-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; + }; + i2c_max77836: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; @@ -605,8 +611,6 @@ }; &mshc_0 { - #address-cells = <1>; - #size-cells = <0>; broken-cd; non-removable; cap-mmc-highspeed; @@ -625,10 +629,48 @@ status = "okay"; }; +&mshc_1 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + samsung,dw-mshc-ciu-div = <1>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>; + bus-width = <4>; + + mmc-pwrseq = <&wlan_pwrseq>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4334-fmac"; + reg = <1>; + + interrupt-parent = <&gpx1>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + &serial_0 { assigned-clocks = <&cmu CLK_SCLK_UART0>; assigned-clock-rates = <100000000>; status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + max-speed = <3000000>; + shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + clocks = <&s2mps14_osc S2MPS11_CLK_BT>; + }; }; &serial_1 { diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts new file mode 100644 index 000000000000..6d0c04d77a39 --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -0,0 +1,768 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos4210 based Galaxy S2 (GT-I9100 version) device tree + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2020 Stenkin Evgeniy <stenkinevgeniy@gmail.com> + * Copyright (c) 2020 Paul Cercueil <paul@crapouillou.net> + */ + +/dts-v1/; +#include "exynos4210.dtsi" +#include "exynos4412-ppmu-common.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> + +/ { + model = "Samsung Galaxy S2 (GT-I9100)"; + compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4"; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x40000000>; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + vemmc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + tsp_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "TSP_FIXED_VOLTAGES"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + }; + + cam_af_28v_reg: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "8M_AF_2.8V_EN"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + cam_io_en_reg: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "CAM_IO_EN"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + cam_io_12v_reg: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "8M_1.2V_EN"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vt_core_15v_reg: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "VT_CORE_1.5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + gpio-keys { + compatible = "gpio-keys"; + + vol-down { + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + label = "volume down"; + debounce-interval = <10>; + }; + + vol-up { + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + label = "volume up"; + debounce-interval = <10>; + }; + + power { + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "power"; + debounce-interval = <10>; + wakeup-source; + }; + + ok { + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_OK>; + label = "ok"; + debounce-interval = <10>; + }; + }; + + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>; + }; + + i2c_max17042_fuel: i2c-gpio { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sda-gpios = <&gpy4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpy4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; + + battery@36 { + compatible = "maxim,max17042"; + + interrupt-parent = <&gpx2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&max17042_fuel_irq>; + pinctrl-names = "default"; + + reg = <0x36>; + maxim,over-heat-temp = <700>; + maxim,over-volt = <4500>; + }; + }; + + spi-lcd { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + num-chipselects = <1>; + cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>; + sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>; + + lcd@0 { + compatible = "samsung,ld9040"; + reg = <0>; + + spi-max-frequency = <1200000>; + + vdd3-supply = <&vmipi_reg>; + vci-supply = <&vcclcd_reg>; + + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; + power-on-delay = <10>; + reset-delay = <10>; + + panel-width-mm = <90>; + panel-height-mm = <154>; + + display-timings { + timing { + clock-frequency = <23492370>; + hactive = <480>; + vactive = <800>; + hback-porch = <16>; + hfront-porch = <16>; + vback-porch = <2>; + vfront-porch = <28>; + hsync-len = <2>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <0>; + }; + }; + + port { + lcd_ep: endpoint { + remote-endpoint = <&fimd_dpi_ep>; + }; + }; + }; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 4 4>; + }; + }; + }; + }; +}; + +&camera { + status = "okay"; +}; + +&cpu0 { + cpu0-supply = <&varm_breg>; +}; + +&ehci { + status = "okay"; + + phys = <&exynos_usbphy 1>; + phy-names = "host"; +}; + +&exynos_usbphy { + status = "okay"; + + vbus-supply = <&safe1_sreg>; +}; + +&fimc_0 { + status = "okay"; + + assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_1 { + status = "okay"; + + assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_2 { + status = "okay"; + + assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock CLK_SCLK_FIMC2>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_3 { + status = "okay"; + + assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimd { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + samsung,invert-vden; + samsung,invert-vclk; + + pinctrl-0 = <&lcd_clk>, <&lcd_data24>; + pinctrl-names = "default"; + + port@3 { + reg = <3>; + + fimd_dpi_ep: endpoint { + remote-endpoint = <&lcd_ep>; + }; + }; +}; + +&gpu { + status = "okay"; + + mali-supply = <&vg3d_breg>; + regulator-microvolt-offset = <50000>; + regulator-microsecs-delay = <50>; +}; + +&hsotg { + status = "okay"; + + dr_mode = "otg"; + vusb_d-supply = <&vusb_reg>; + vusb_a-supply = <&vusbdac_reg>; +}; + +&i2c_3 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + + mxt224-touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + + interrupt-parent = <&gpx0>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&i2c_5 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + + pinctrl-0 = <&i2c5_bus>; + pinctrl-names = "default"; + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + reg = <0x66>; + + interrupts-extended = <&gpx0 7 IRQ_TYPE_NONE>, + <&gpx2 3 IRQ_TYPE_EDGE_FALLING>; + + max8997,pmic-buck1-uses-gpio-dvs; + max8997,pmic-buck2-uses-gpio-dvs; + max8997,pmic-buck5-uses-gpio-dvs; + + max8997,pmic-ignore-gpiodvs-side-effect; + max8997,pmic-buck125-default-dvs-idx = <0>; + + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, + <&gpx0 6 GPIO_ACTIVE_HIGH>, + <&gpl0 0 GPIO_ACTIVE_HIGH>; + + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, + <950000>, <900000>, + <1100000>, <1000000>, + <950000>, <900000>; + + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>; + pinctrl-names = "default"; + + regulators { + vadc_reg: LDO1 { + regulator-name = "VADC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + }; + valive_reg: LDO2 { + regulator-name = "VALIVE_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + + }; + + vusb_reg: LDO3 { + regulator-name = "VUSB_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vmipi_reg: LDO4 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vhsic_reg: LDO5 { + regulator-name = "VHSIC_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vpda_reg: LDO6 { + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcam_reg: LDO7 { + regulator-name = "CAM_ISP_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vusbdac_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vccpda_reg: LDO9 { + regulator-name = "VCC_2.8V_PDA"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vtouch_reg: LDO11 { + regulator-name = "TOUCH_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vpll_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vtcam_reg: LDO12 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcclcd_reg: LDO13 { + regulator-name = "VCC_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + vmotor_reg: LDO14 { + regulator-name = "VCC_2.8V_MOTOR"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vled_reg: LDO15 { + regulator-name = "LED_A_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + camsensor_reg: LDO16 { + regulator-name = "CAM_SENSOR_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vtf_reg: LDO17 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vtouchled_reg: LDO18 { + regulator-name = "TOUCH_LED_3.3V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + vddq_reg: LDO21 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + varm_breg: BUCK1 { + regulator-name = "VARM_1.2V_C210"; + regulator-min-microvolt = <65000>; + regulator-max-microvolt = <2225000>; + regulator-always-on; + }; + + vint_breg: BUCK2 { + regulator-name = "VINT_1.1V_C210"; + regulator-min-microvolt = <65000>; + regulator-max-microvolt = <2225000>; + regulator-always-on; + }; + + vg3d_breg: BUCK3 { + regulator-name = "G3D_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + camisp_breg: BUCK4 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vmem_breg: BUCK5 { + regulator-name = "VMEM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vccsub_breg: BUCK7 { + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + safe1_sreg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + }; + + safe2_sreg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + regulator-always-on; + }; + + chargercv_reg: CHARGER_CV { + regulator-name = "CHARGER_CV"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <4100000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c_7 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + + pinctrl-0 = <&i2c7_bus>; + pinctrl-names = "default"; + + ak8975@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + + gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; + }; +}; + +&pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep0>; + + sleep0: sleep-states { + gpa0-0 { + samsung,pins = "gpa0-0"; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + + gpa0-1 { + samsung,pins = "gpa0-1"; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + + gpa0-2 { + samsung,pins = "gpa0-2"; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + + gpa0-3 { + samsung,pins = "gpa0-3"; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + }; +}; + +&pinctrl_1 { + mhl_int: mhl-int { + samsung,pins = "gpf3-5"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i2c_mhl_bus: i2c-mhl-bus { + samsung,pins = "gpf0-4", "gpf0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + usb_sel: usb-sel { + samsung,pins = "gpl0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-val = <0>; + }; + + bt_en: bt-en { + samsung,pins = "gpl0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-val = <0>; + }; + + bt_res: bt-res { + samsung,pins = "gpl1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-val = <0>; + }; + + otg_gp: otg-gp { + samsung,pins = "gpx3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-val = <0>; + }; + + mag_mhl_gpio: mag-mhl-gpio { + samsung,pins = "gpd0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + max8997_irq: max8997-irq { + samsung,pins = "gpx0-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + max17042_fuel_irq: max17042-fuel-irq { + samsung,pins = "gpx2-3"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + tsp224_irq: tsp224-irq { + samsung,pins = "gpx0-4"; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + }; +}; + +&sdhci_0 { + status = "okay"; + + bus-width = <8>; + non-removable; + vmmc-supply = <&vemmc_reg>; + + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>; + pinctrl-names = "default"; +}; + +&sdhci_2 { + status = "okay"; + + bus-width = <4>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vtf_reg>; + + pinctrl-0 = <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>; + pinctrl-names = "default"; +}; + +&sdhci_3 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + bus-width = <4>; + mmc-pwrseq = <&wlan_pwrseq>; + vmmc-supply = <&vtf_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4330-fmac"; + reg = <1>; + + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&serial_0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_en>, <&bt_res>, <&uart0_data>, <&uart0_fctl>; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + + shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&tmu { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 0d1e1a9c2f6e..890525b10d22 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -251,12 +251,7 @@ }; buck1_reg: BUCK1 { - /* - * HACK: The real name is VDD_ARM_1.2V, - * but exynos-cpufreq does not support - * DT-based regulator lookup yet. - */ - regulator-name = "vdd_arm"; + regulator-name = "VDD_ARM_1.2V"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1350000>; regulator-always-on; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 7c39dd1c4d3a..3d791db6095c 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -121,6 +121,11 @@ }; }; + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>; + }; + fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; @@ -280,11 +285,10 @@ max8997_pmic@66 { compatible = "maxim,max8997-pmic"; - interrupts-extended = <&gpx0 7 0>, <&gpx2 3 0>; reg = <0x66>; - interrupt-parent = <&gpx0>; - interrupts = <7 IRQ_TYPE_NONE>; + interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>, + <&gpx2 3 IRQ_TYPE_EDGE_FALLING>; max8997,pmic-buck1-uses-gpio-dvs; max8997,pmic-buck2-uses-gpio-dvs; @@ -403,12 +407,7 @@ }; varm_breg: BUCK1 { - /* - * HACK: The real name is VARM_1.2V_C210, - * but exynos-cpufreq does not support - * DT-based regulator lookup yet. - */ - regulator-name = "vdd_arm"; + regulator-name = "VARM_1.2V_C210"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1350000>; regulator-always-on; @@ -471,6 +470,30 @@ status = "okay"; }; +&sdhci_3 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + bus-width = <4>; + mmc-pwrseq = <&wlan_pwrseq>; + vmmc-supply = <&tflash_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4330-fmac"; + reg = <1>; + + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + &serial_0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 9dda6bdb9253..02fde1a75ebd 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -50,6 +50,11 @@ enable-active-high; }; + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gp |