Merge tag 'omap-for-v3.8/cleanup-timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

Timer clean-up to get us closer to moving timer code to drivers,
and to get rid of CONFIG_OMAP_32K_TIMER and rely on the board
or devicetree provided timer configuration.

Note that these changes are on top of the recent timer fixes.

By Jon Hunter (32) and others
via Tony Lindgren
* tag 'omap-for-v3.8/cleanup-timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (71 commits)
  ARM: OMAP3: cm-t3517: use GPTIMER for system clock
  ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER
  ARM: OMAP2+: Fix compiler warning for 32k timer
  ARM: OMAP: Remove unnecessary inclusion of dmtimer.h
  ARM: OMAP: Add platform data header for DMTIMERs
  ARM: OMAP: Remove unnecessary omap_dm_timer structure declaration
  ARM: OMAP2+: Remove unnecessary local variable in timer code
  ARM: OMAP: Don't store timers physical address
  ARM: OMAP: Define omap_dm_timer_prepare function as static
  ARM: OMAP: Clean-up dmtimer reset code
  ARM: OMAP: Remove __omap_dm_timer_set_source function
  ARM: OMAP: Remove unnecessary call to clk_get()
  ARM: OMAP: Add dmtimer interrupt disable function
  ARM: OMAP: Fix spurious interrupts when using timer match feature
  ARM: OMAP: Don't restore DMTIMER interrupt status register
  ARM: OMAP: Don't restore of DMTIMER TISTAT register
  ARM: OMAP: Fix dmtimer reset for timer1
  ARM: OMAP2+: Don't use __omap_dm_timer_reset()
  ARM: OMAP2/3: Define HWMOD software reset status for DMTIMERs
  ARM: OMAP3: Correct HWMOD DMTIMER SYSC register declarations
  ...

Change/change conflict in arch/arm/mach-omap2/board-cm-t3517.c.

Signed-off-by: Olof Johansson <olof@lixom.net>

45 files changed, 1993 insertions, 323 deletions

diff --git a/Documentation/devicetree/bindings/arm/omap/counter.txt b/Documentation/devicetree/bindings/arm/omap/counter.txt
new file mode 100644
index 000000000000..5bd8aa091315
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/counter.txt
@@ -0,0 +1,15 @@
+OMAP Counter-32K bindings
+
+Required properties:
+- compatible:	Must be "ti,omap-counter32k" for OMAP controllers
+- reg:		Contains timer register address range (base address and length)
+- ti,hwmods:	Name of the hwmod associated to the counter, which is typically
+		"counter_32k"
+
+Example:
+
+counter32k: counter@4a304000 {
+	compatible = "ti,omap-counter32k";
+	reg = <0x4a304000 0x20>;
+	ti,hwmods = "counter_32k";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/timer.txt b/Documentation/devicetree/bindings/arm/omap/timer.txt
new file mode 100644
index 000000000000..8732d4d41f8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/timer.txt
@@ -0,0 +1,31 @@
+OMAP Timer bindings
+
+Required properties:
+- compatible:		Must be "ti,omap2-timer" for OMAP2+ controllers.
+- reg:			Contains timer register address range (base address and
+			length).
+- interrupts: 		Contains the interrupt information for the timer. The
+			format is being dependent on which interrupt controller
+			the OMAP device uses.
+- ti,hwmods:		Name of the hwmod associated to the timer, "timer<X>",
+			where <X> is the instance number of the timer from the
+			HW spec.
+
+Optional properties:
+- ti,timer-alwon:	Indicates the timer is in an alway-on power domain.
+- ti,timer-dsp:		Indicates the timer can interrupt the on-chip DSP in
+			addition to the ARM CPU.
+- ti,timer-pwm: 	Indicates the timer can generate a PWM output.
+- ti,timer-secure: 	Indicates the timer is reserved on a secure OMAP device
+			and therefore cannot be used by the kernel.
+
+Example:
+
+timer12: timer@48304000 {
+	compatible = "ti,omap2-timer";
+	reg = <0x48304000 0x400>;
+	interrupts = <95>;
+	ti,hwmods = "timer12"
+	ti,timer-alwon;
+	ti,timer-secure;
+};
diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
index d2fe064a828b..63dd8051521c 100644
--- a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
+++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
@@ -2,9 +2,27 @@
 
 properties:
 - compatible : Should be "ti,omap-ocp2scp"
+- reg : Address and length of the register set for the device
 - #address-cells, #size-cells : Must be present if the device has sub-nodes
 - ranges : the child address space are mapped 1:1 onto the parent address space
 - ti,hwmods : must be "ocp2scp_usb_phy"
 
 Sub-nodes:
 All the devices connected to ocp2scp are described using sub-node to ocp2scp
+
+ocp2scp@4a0ad000 {
+	compatible = "ti,omap-ocp2scp";
+	reg = <0x4a0ad000 0x1f>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,hwmods = "ocp2scp_usb_phy";
+
+	subnode1 {
+	...
+	};
+
+	subnode2 {
+	...
+	};
+};
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 2f5322b119eb..446859fcdca4 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -55,5 +55,7 @@ st-micro,24c256		i2c serial eeprom  (24cxx)
 stm,m41t00		Serial Access TIMEKEEPER
 stm,m41t62		Serial real-time clock (RTC) with alarm
 stm,m41t80		M41T80 - SERIAL ACCESS RTC WITH ALARMS
+taos,tsl2550		Ambient Light Sensor with SMBUS/Two Wire Serial Interface
 ti,tsc2003		I2C Touch-Screen Controller
 ti,tmp102		Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
+ti,tmp275		Digital Temperature Sensor
diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
index ca8fa56e9f03..707c1a2dae06 100644
--- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
@@ -1,5 +1,7 @@
 AM33XX MUSB GLUE
  - compatible : Should be "ti,musb-am33xx"
+ - reg : offset and length of register sets, first usbss, then for musb instances
+ - interrupts : usbss, musb instance interrupts in order
  - ti,hwmods : must be "usb_otg_hs"
  - multipoint : Should be "1" indicating the musb controller supports
    multipoint. This is a MUSB configuration-specific setting.
@@ -12,3 +14,22 @@ AM33XX MUSB GLUE
    represents PERIPHERAL.
  - power : Should be "250". This signifies the controller can supply upto
    500mA when operating in host mode.
+
+Example:
+
+usb@47400000  {
+	compatible = "ti,musb-am33xx";
+	reg = <0x47400000 0x1000	/* usbss */
+	       0x47401000 0x800		/* musb instance 0 */
+	       0x47401800 0x800>;	/* musb instance 1 */
+	interrupts = <17		/* usbss */
+		      18		/* musb instance 0 */
+		      19>;		/* musb instance 1 */
+	multipoint = <1>;
+	num-eps = <16>;
+	ram-bits = <12>;
+	port0-mode = <3>;
+	port1-mode = <3>;
+	power = <250>;
+	ti,hwmods = "usb_otg_hs";
+};
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f37cf9fa5fa0..2458b69e2be6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -63,15 +63,17 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-m28evk.dtb \
 	imx28-tx28.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+	omap3-beagle.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
 	omap3-tobi.dtb \
 	omap4-panda.dtb \
-	omap4-pandaES.dtb \
-	omap4-var_som.dtb \
+	omap4-panda-es.dtb \
+	omap4-var-som.dtb \
 	omap4-sdp.dtb \
 	omap5-evm.dtb \
 	am335x-evm.dtb \
+	am335x-evmsk.dtb \
 	am335x-bone.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
 dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index c634f87e230e..2c338889df1b 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -13,11 +13,31 @@
 	model = "TI AM335x BeagleBone";
 	compatible = "ti,am335x-bone", "ti,am33xx";
 
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		user_leds_s0: user_leds_s0 {
+			pinctrl-single,pins = <
+				0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+				0x58 0x17	/* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
+				0x5c 0x7	/* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
+				0x60 0x17	/* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
+			>;
+		};
+	};
+
 	ocp {
 		uart1: serial@44e09000 {
 			status = "okay";
@@ -33,6 +53,36 @@
 
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led@2 {
+			label = "beaglebone:green:heartbeat";
+			gpios = <&gpio2 21 0>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "beaglebone:green:mmc0";
+			gpios = <&gpio2 22 0>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio2 23 0>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio2 24 0>;
+			default-state = "off";
+		};
+	};
 };
 
 /include/ "tps65217.dtsi"
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 185d6325a458..9f65f17ebdf8 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -13,11 +13,39 @@
 	model = "TI AM335x EVM";
 	compatible = "ti,am335x-evm", "ti,am33xx";
 
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
+
+		matrix_keypad_s0: matrix_keypad_s0 {
+			pinctrl-single,pins = <
+				0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+				0x58 0x7	/* gpmc_a6.gpio1_22, OUTPUT | MODE7 */
+				0x64 0x27	/* gpmc_a9.gpio1_25, INPUT | MODE7 */
+				0x68 0x27	/* gpmc_a10.gpio1_26, INPUT | MODE7 */
+				0x6c 0x27	/* gpmc_a11.gpio1_27, INPUT | MODE7 */
+			>;
+		};
+
+		volume_keys_s0: volume_keys_s0 {
+			pinctrl-single,pins = <
+				0x150 0x27	/* spi0_sclk.gpio0_2, INPUT | MODE7 */
+				0x154 0x27	/* spi0_d0.gpio0_3, INPUT | MODE7 */
+			>;
+		};
+	};
+
 	ocp {
 		uart1: serial@44e09000 {
 			status = "okay";
@@ -31,6 +59,49 @@
 				reg = <0x2d>;
 			};
 		};
+
+		i2c2: i2c@4802a000 {
+			status = "okay";
+			clock-frequency = <100000>;
+
+			lis331dlh: lis331dlh@18 {
+				compatible = "st,lis331dlh", "st,lis3lv02d";
+				reg = <0x18>;
+				Vdd-supply = <&lis3_reg>;
+				Vdd_IO-supply = <&lis3_reg>;
+
+				st,click-single-x;
+				st,click-single-y;
+				st,click-single-z;
+				st,click-thresh-x = <10>;
+				st,click-thresh-y = <10>;
+				st,click-thresh-z = <10>;
+				st,irq1-click;
+				st,irq2-click;
+				st,wakeup-x-lo;
+				st,wakeup-x-hi;
+				st,wakeup-y-lo;
+				st,wakeup-y-hi;
+				st,wakeup-z-lo;
+				st,wakeup-z-hi;
+				st,min-limit-x = <120>;
+				st,min-limit-y = <120>;
+				st,min-limit-z = <140>;
+				st,max-limit-x = <550>;
+				st,max-limit-y = <550>;
+				st,max-limit-z = <750>;
+			};
+
+			tsl2550: tsl2550@39 {
+				compatible = "taos,tsl2550";
+				reg = <0x39>;
+			};
+
+			tmp275: tmp275@48 {
+				compatible = "ti,tmp275";
+				reg = <0x48>;
+			};
+		};
 	};
 
 	vbat: fixedregulator@0 {
@@ -40,6 +111,53 @@
 		regulator-max-microvolt = <5000000>;
 		regulator-boot-on;
 	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio2 25 0	/* Bank1, pin25 */
+			     &gpio2 26 0	/* Bank1, pin26 */
+			     &gpio2 27 0>;	/* Bank1, pin27 */
+
+		col-gpios = <&gpio2 21 0	/* Bank1, pin21 */
+			     &gpio2 22 0>;	/* Bank1, pin22 */
+
+		linux,keymap = <0x0000008b	/* MENU */
+				0x0100009e	/* BACK */
+				0x02000069	/* LEFT */
+				0x0001006a	/* RIGHT */
+				0x0101001c	/* ENTER */
+				0x0201006c>;	/* DOWN */
+	};
+
+	gpio_keys: volume_keys@0 {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		switch@9 {
+			label = "volume-up";
+			linux,code = <115>;
+			gpios = <&gpio1 2 1>;
+			gpio-key,wakeup;
+		};
+
+		switch@10 {
+			label = "volume-down";
+			linux,code = <114>;
+			gpios = <&gpio1 3 1>;
+			gpio-key,wakeup;
+		};
+	};
 };
 
 /include/ "tps65910.dtsi"
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
new file mode 100644
index 000000000000..f5a6162a4ff2
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -0,0 +1,250 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * AM335x Starter Kit
+ * http://www.ti.com/tool/tmdssk3358
+ */
+
+/dts-v1/;
+
+/include/ "am33xx.dtsi"
+
+/ {
+	model = "TI AM335x EVM-SK";
+	compatible = "ti,am335x-evmsk", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>;
+
+		user_leds_s0: user_leds_s0 {
+			pinctrl-single,pins = <
+				0x10 0x7	/* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */
+				0x14 0x7	/* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */
+				0x18 0x7	/* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */
+				0x1c 0x7	/* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */
+			>;
+		};
+
+		gpio_keys_s0: gpio_keys_s0 {
+			pinctrl-single,pins = <
+				0x94 0x27	/* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */
+				0x90 0x27	/* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */
+				0x70 0x27	/* gpmc_wait0.gpio0_30, INPUT | MODE7 */
+				0x9c 0x27	/* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */
+			>;
+		};
+	};
+
+	ocp {
+		uart1: serial@44e09000 {
+			status = "okay";
+		};
+
+		i2c1: i2c@44e0b000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			tps: tps@2d {
+				reg = <0x2d>;
+			};
+
+			lis331dlh: lis331dlh@18 {
+				compatible = "st,lis331dlh", "st,lis3lv02d";
+				reg = <0x18>;
+				Vdd-supply = <&lis3_reg>;
+				Vdd_IO-supply = <&lis3_reg>;
+
+				st,click-single-x;
+				st,click-single-y;
+				st,click-single-z;
+				st,click-thresh-x = <10>;
+				st,click-thresh-y = <10>;
+				st,click-thresh-z = <10>;
+				st,irq1-click;
+				st,irq2-click;
+				st,wakeup-x-lo;
+				st,wakeup-x-hi;
+				st,wakeup-y-lo;
+				st,wakeup-y-hi;
+				st,wakeup-z-lo;
+				st,wakeup-z-hi;
+				st,min-limit-x = <120>;
+				st,min-limit-y = <120>;
+				st,min-limit-z = <140>;
+				st,max-limit-x = <550>;
+				st,max-limit-y = <550>;
+				st,max-limit-z = <750>;
+			};
+		};
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "evmsk:green:usr0";
+			gpios = <&gpio2 4 0>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "evmsk:green:usr1";
+			gpios = <&gpio2 5 0>;
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "evmsk:green:mmc0";
+			gpios = <&gpio2 6 0>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "evmsk:green:heartbeat";
+			gpios = <&gpio2 7 0>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	gpio_buttons: gpio_buttons@0 {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@1 {
+			label = "button0";
+			linux,code = <0x100>;
+			gpios = <&gpio3 3 0>;
+		};
+
+		switch@2 {
+			label = "button1";
+			linux,code = <0x101>;
+			gpios = <&gpio3 2 0>;
+		};
+
+		switch@3 {
+			label = "button2";
+			linux,code = <0x102>;
+			gpios = <&gpio1 30 0>;
+			gpio-key,wakeup;
+		};
+
+		switch@4 {
+			label = "button3";
+			linux,code = <0x103>;
+			gpios = <&gpio3 5 0>;
+		};
+	};
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index bb31bff01998..20a3f29a6bfe 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -12,6 +12,7 @@
 
 / {
 	compatible = "ti,am33xx";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		serial0 = &uart1;
@@ -25,6 +26,21 @@
 	cpus {
 		cpu@0 {
 			compatible = "arm,cortex-a8";
+
+			/*
+			 * To consider voltage drop between PMIC and SoC,
+			 * tolerance value is reduced to 2% from 4% and
+			 * voltage value is increased as a precaution.
+			 */
+			operating-points = <
+				/* kHz    uV */
+				720000  1285000
+				600000  1225000
+				500000  1125000
+				275000  1125000
+			>;
+			voltage-tolerance = <2>; /* 2 percentage */
+			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
 
@@ -40,6 +56,15 @@
 		};
 	};
 
+	am33xx_pinmux: pinmux@44e10800 {
+		compatible = "pinctrl-single";
+		reg = <0x44e10800 0x0238>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x7f>;
+	};
+
 	/*
 	 * XXX: Use a flat representation of the AM33XX interconnect.
 	 * The real AM33XX interconnect network is quite complex.Since
@@ -70,7 +95,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x44e07000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <96>;
 		};
 
@@ -82,7 +106,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x4804c000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <98>;
 		};
 
@@ -94,7 +117,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x481ac000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <32>;
 		};
 
@@ -106,7 +128,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x481ae000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <62>;
 		};
 
@@ -115,7 +136,6 @@
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 			reg = <0x44e09000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <72>;
 			status = "disabled";
 		};
@@ -125,7 +145,6 @@
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 			reg = <0x48022000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <73>;
 			status = "disabled";
 		};
@@ -135,7 +154,6 @@
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 			reg = <0x48024000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <74>;
 			status = "disabled";
 		};
@@ -145,7 +163,6 @@
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 			reg = <0x481a6000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <44>;
 			status = "disabled";
 		};
@@ -155,7 +172,6 @@
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 			reg = <0x481a8000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <45>;
 			status = "disabled";
 		};
@@ -165,7 +181,6 @@
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 			reg = <0x481aa000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <46>;
 			status = "disabled";
 		};
@@ -176,7 +191,6 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
 			reg = <0x44e0b000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <70>;
 			status = "disabled";<