diff options
author | Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> | 2019-05-09 09:51:48 +0530 |
---|---|---|
committer | Wolfram Sang <wsa@the-dreams.de> | 2019-05-27 21:26:01 +0200 |
commit | c245d94ed106c4ebb8a4bc1d08b78e3c39c38afb (patch) | |
tree | d2ee8a420055f9721e2866c5670b917550b54eb9 | |
parent | a4b5363a51fc78fad89368ae5b7c504bcb10f66d (diff) |
i2c: iproc: Add multi byte read-write support for slave mode
Add multiple byte read-write support for slave mode.
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-rw-r--r-- | drivers/i2c/busses/i2c-bcm-iproc.c | 117 |
1 files changed, 53 insertions, 64 deletions
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index a845b8decac8..2c7f145a036e 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -165,12 +165,6 @@ enum i2c_slave_read_status { I2C_SLAVE_RX_END, }; -enum i2c_slave_xfer_dir { - I2C_SLAVE_DIR_READ = 0, - I2C_SLAVE_DIR_WRITE, - I2C_SLAVE_DIR_NONE, -}; - enum bus_speed_index { I2C_SPD_100K = 0, I2C_SPD_400K, @@ -203,7 +197,6 @@ struct bcm_iproc_i2c_dev { struct i2c_msg *msg; struct i2c_client *slave; - enum i2c_slave_xfer_dir xfer_dir; /* bytes that have been transferred */ unsigned int tx_bytes; @@ -219,7 +212,8 @@ struct bcm_iproc_i2c_dev { | BIT(IS_M_RX_THLD_SHIFT)) #define ISR_MASK_SLAVE (BIT(IS_S_START_BUSY_SHIFT)\ - | BIT(IS_S_RX_EVENT_SHIFT) | BIT(IS_S_RD_EVENT_SHIFT)) + | BIT(IS_S_RX_EVENT_SHIFT) | BIT(IS_S_RD_EVENT_SHIFT)\ + | BIT(IS_S_TX_UNDERRUN_SHIFT)) static int bcm_iproc_i2c_reg_slave(struct i2c_client *slave); static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave); @@ -297,15 +291,11 @@ static void bcm_iproc_i2c_slave_init( /* clear all pending slave interrupts */ iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE); - /* Enable interrupt register for any READ event */ - val = BIT(IE_S_RD_EVENT_SHIFT); /* Enable interrupt register to indicate a valid byte in receive fifo */ - val |= BIT(IE_S_RX_EVENT_SHIFT); + val = BIT(IE_S_RX_EVENT_SHIFT); /* Enable interrupt register for the Slave BUSY command */ val |= BIT(IE_S_START_BUSY_SHIFT); iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); - - iproc_i2c->xfer_dir = I2C_SLAVE_DIR_NONE; } static void bcm_iproc_i2c_check_slave_status( @@ -314,8 +304,11 @@ static void bcm_iproc_i2c_check_slave_status( u32 val; val = iproc_i2c_rd_reg(iproc_i2c, S_CMD_OFFSET); - val = (val >> S_CMD_STATUS_SHIFT) & S_CMD_STATUS_MASK; + /* status is valid only when START_BUSY is cleared after it was set */ + if (val & BIT(S_CMD_START_BUSY_SHIFT)) + return; + val = (val >> S_CMD_STATUS_SHIFT) & S_CMD_STATUS_MASK; if (val == S_CMD_STATUS_TIMEOUT) { dev_err(iproc_i2c->device, "slave random stretch time timeout\n"); @@ -327,70 +320,66 @@ static void bcm_iproc_i2c_check_slave_status( } static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c, - u32 status) + u32 status) { - u8 value; u32 val; - u32 rd_status; - u32 tmp; + u8 value, rx_status; - /* Start of transaction. check address and populate the direction */ - if (iproc_i2c->xfer_dir == I2C_SLAVE_DIR_NONE) { - tmp = iproc_i2c_rd_reg(iproc_i2c, S_RX_OFFSET); - rd_status = (tmp >> S_RX_STATUS_SHIFT) & S_RX_STATUS_MASK; - /* This condition checks whether the request is a new request */ - if (((rd_status == I2C_SLAVE_RX_START) && - (status & BIT(IS_S_RX_EVENT_SHIFT))) || - ((rd_status == I2C_SLAVE_RX_END) && - (status & BIT(IS_S_RD_EVENT_SHIFT)))) { - - /* Last bit is W/R bit. - * If 1 then its a read request(by master). - */ - iproc_i2c->xfer_dir = tmp & SLAVE_READ_WRITE_BIT_MASK; - if (iproc_i2c->xfer_dir == I2C_SLAVE_DIR_WRITE) - i2c_slave_event(iproc_i2c->slave, - I2C_SLAVE_READ_REQUESTED, &value); - else - i2c_slave_event(iproc_i2c->slave, + /* Slave RX byte receive */ + if (status & BIT(IS_S_RX_EVENT_SHIFT)) { + val = iproc_i2c_rd_reg(iproc_i2c, S_RX_OFFSET); + rx_status = (val >> S_RX_STATUS_SHIFT) & S_RX_STATUS_MASK; + if (rx_status == I2C_SLAVE_RX_START) { + /* Start of SMBUS for Master write */ + i2c_slave_event(iproc_i2c->slave, I2C_SLAVE_WRITE_REQUESTED, &value); - } - } - /* read request from master */ - if ((status & BIT(IS_S_RD_EVENT_SHIFT)) && - (iproc_i2c->xfer_dir == I2C_SLAVE_DIR_WRITE)) { - i2c_slave_event(iproc_i2c->slave, - I2C_SLAVE_READ_PROCESSED, &value); - iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, value); + val = iproc_i2c_rd_reg(iproc_i2c, S_RX_OFFSET); + value = (u8)((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK); + i2c_slave_event(iproc_i2c->slave, + I2C_SLAVE_WRITE_RECEIVED, &value); + } else if (status & BIT(IS_S_RD_EVENT_SHIFT)) { + /* Start of SMBUS for Master Read */ + i2c_slave_event(iproc_i2c->slave, + I2C_SLAVE_READ_REQUESTED, &value); + iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, value); - val = BIT(S_CMD_START_BUSY_SHIFT); - iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val); - } + val = BIT(S_CMD_START_BUSY_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val); - /* write request from master */ - if ((status & BIT(IS_S_RX_EVENT_SHIFT)) && - (iproc_i2c->xfer_dir == I2C_SLAVE_DIR_READ)) { - val = iproc_i2c_rd_reg(iproc_i2c, S_RX_OFFSET); - /* Its a write request by Master to Slave. - * We read data present in receive FIFO - */ - value = (u8)((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK); + /* + * Enable interrupt for TX FIFO becomes empty and + * less than PKT_LENGTH bytes were output on the SMBUS + */ + val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); + val |= BIT(IE_S_TX_UNDERRUN_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); + } else { + /* Master write other than start */ + value = (u8)((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK); + i2c_slave_event(iproc_i2c->slave, + I2C_SLAVE_WRITE_RECEIVED, &value); + } + } else if (status & BIT(IS_S_TX_UNDERRUN_SHIFT)) { + /* Master read other than start */ i2c_slave_event(iproc_i2c->slave, - I2C_SLAVE_WRITE_RECEIVED, &value); - - /* check the status for the last byte of the transaction */ - rd_status = (val >> S_RX_STATUS_SHIFT) & S_RX_STATUS_MASK; - if (rd_status == I2C_SLAVE_RX_END) - iproc_i2c->xfer_dir = I2C_SLAVE_DIR_NONE; + I2C_SLAVE_READ_PROCESSED, &value); - dev_dbg(iproc_i2c->device, "\nread value = 0x%x\n", value); + iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, value); + val = BIT(S_CMD_START_BUSY_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val); } /* Stop */ if (status & BIT(IS_S_START_BUSY_SHIFT)) { i2c_slave_event(iproc_i2c->slave, I2C_SLAVE_STOP, &value); - iproc_i2c->xfer_dir = I2C_SLAVE_DIR_NONE; + /* + * Enable interrupt for TX FIFO becomes empty and + * less than PKT_LENGTH bytes were output on the SMBUS + */ + val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); + val &= ~BIT(IE_S_TX_UNDERRUN_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); } /* clear interrupt status */ |