Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: (36 commits)
  [PATCH] hwmon: add required idr locking
  [PATCH] I2C: hwmon: Rename register parameters
  [PATCH] I2C: Drop unneeded i2c-dev.h includes
  [PATCH] I2C: i2c-ixp4xx: Add hwmon class
  [PATCH] I2C: i2c-piix4: Add Broadcom HT-1000 support
  [PATCH] I2C: i2c-amd756-s4882: Improve static mutex initialization
  [PATCH] I2C: i2c-ali1535: Drop redundant mutex
  [PATCH] i2c: Cleanup isp1301_omap
  [PATCH] i2c: Fix i2c-ite name initialization
  [PATCH] i2c: Drop the i2c-frodo bus driver
  [PATCH] i2c: Optimize core_lists mutex usage
  [PATCH] w83781d: Don't reset the chip by default
  [PATCH] w83781d: Document the alarm and beep bits
  [PATCH] w83627ehf: Refactor the sysfs interface
  [PATCH] hwmon: Support the Pentium M VID code
  [PATCH] hwmon: Add support for the Winbond W83687THF
  [PATCH] hwmon: f71805f semaphore to mutex conversions
  [PATCH] hwmon: Semaphore to mutex conversions
  [PATCH] i2c: Semaphore to mutex conversions, part 3
  [PATCH] i2c: Semaphore to mutex conversions, part 2
  ...

81 files changed, 1706 insertions, 1786 deletions

diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf
index bbeaba680443..792231921241 100644
--- a/Documentation/hwmon/w83627hf
+++ b/Documentation/hwmon/w83627hf
@@ -18,6 +18,10 @@ Supported chips:
     Prefix: 'w83637hf'
     Addresses scanned: ISA address retrieved from Super I/O registers
     Datasheet: http://www.winbond.com/PDF/sheet/w83637hf.pdf
+  * Winbond W83687THF
+    Prefix: 'w83687thf'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet: Provided by Winbond on request
 
 Authors:
         Frodo Looijaard <frodol@dds.nl>,
diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d
index e5459333ba68..b1e9f80098ee 100644
--- a/Documentation/hwmon/w83781d
+++ b/Documentation/hwmon/w83781d
@@ -36,6 +36,11 @@ Module parameters
   Use 'init=0' to bypass initializing the chip.
   Try this if your computer crashes when you load the module.
 
+* reset int
+  (default 0)
+  The driver used to reset the chip on load, but does no more. Use
+  'reset=1' to restore the old behavior. Report if you need to do this.
+
 force_subclients=bus,caddr,saddr,saddr
   This is used to force the i2c addresses for subclients of
   a certain chip. Typical usage is `force_subclients=0,0x2d,0x4a,0x4b'
@@ -123,6 +128,25 @@ When an alarm goes off, you can be warned by a beeping signal through
 your computer speaker. It is possible to enable all beeping globally,
 or only the beeping for some alarms.
 
+Individual alarm and beep bits:
+
+0x000001: in0
+0x000002: in1
+0x000004: in2
+0x000008: in3
+0x000010: temp1
+0x000020: temp2 (+temp3 on W83781D)
+0x000040: fan1
+0x000080: fan2
+0x000100: in4
+0x000200: in5
+0x000400: in6
+0x000800: fan3
+0x001000: chassis
+0x002000: temp3 (W83782D and W83627HF only)
+0x010000: in7 (W83782D and W83627HF only)
+0x020000: in8 (W83782D and W83627HF only)
+
 If an alarm triggers, it will remain triggered until the hardware register
 is read at least once. This means that the cause for the alarm may
 already have disappeared! Note that in the current implementation, all
diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index 856b4b8b962c..a1c8f581afed 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -4,7 +4,7 @@ Supported adapters:
   * Intel 82371AB PIIX4 and PIIX4E
   * Intel 82443MX (440MX)
     Datasheet: Publicly available at the Intel website
-  * ServerWorks OSB4, CSB5 and CSB6 southbridges
+  * ServerWorks OSB4, CSB5, CSB6 and HT-1000 southbridges
     Datasheet: Only available via NDA from ServerWorks
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com
diff --git a/Documentation/i2c/busses/scx200_acb b/Documentation/i2c/busses/scx200_acb
index 08c8cd1df60c..f50e69981ec6 100644
--- a/Documentation/i2c/busses/scx200_acb
+++ b/Documentation/i2c/busses/scx200_acb
@@ -6,9 +6,10 @@ Module Parameters
 -----------------
 
 * base: int
-  Base addresses for the ACCESS.bus controllers
+  Base addresses for the ACCESS.bus controllers on SCx200 and SC1100 devices
 
 Description
 -----------
 
-Enable the use of the ACCESS.bus controllers of a SCx200 processor.
+Enable the use of the ACCESS.bus controller on the Geode SCx200 and
+SC1100 processors and the CS5535 and CS5536 Geode companion devices.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 7230d4e08196..99cdc612d2c6 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -406,13 +406,14 @@ config SENSORS_W83L785TS
 	  will be called w83l785ts.
 
 config SENSORS_W83627HF
-	tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
-	depends on HWMON && I2C && EXPERIMENTAL
+	tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
+	depends on HWMON && I2C
 	select I2C_ISA
 	select HWMON_VID
 	help
 	  If you say yes here you get support for the Winbond W836X7 series
-	  of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
+	  of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
+	  W83697HF.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called w83627hf.
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index 665612729cb9..2b6e74dd4a82 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 
 /* Addresses to scan */
@@ -92,7 +93,7 @@ struct adm1021_data {
 	struct class_device *class_dev;
 	enum chips type;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
@@ -162,10 +163,10 @@ static ssize_t set_##value(struct device *dev, struct device_attribute *attr, co
 	struct adm1021_data *data = i2c_get_clientdata(client);	\
 	int temp = simple_strtoul(buf, NULL, 10);		\
 								\
-	down(&data->update_lock);				\
+	mutex_lock(&data->update_lock);				\
 	data->value = TEMP_TO_REG(temp);			\
 	adm1021_write_value(client, reg, data->value);		\
-	up(&data->update_lock);					\
+	mutex_unlock(&data->update_lock);			\
 	return count;						\
 }
 set(temp_max, ADM1021_REG_TOS_W);
@@ -275,7 +276,7 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind)
 	strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
 	data->type = kind;
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -351,7 +352,7 @@ static struct adm1021_data *adm1021_update_device(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adm1021_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
@@ -375,7 +376,7 @@ static struct adm1021_data *adm1021_update_device(struct device *dev)
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 9331c56d2ba6..a4c859c9fbf8 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -53,6 +53,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /*
  * Addresses to scan
@@ -133,7 +134,7 @@ static struct i2c_driver adm1025_driver = {
 struct adm1025_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* in jiffies */
 
@@ -207,11 +208,11 @@ static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute
 	struct adm1025_data *data = i2c_get_clientdata(client); \
 	long val = simple_strtol(buf, NULL, 10); \
  \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	data->in_min[offset] = IN_TO_REG(val, in_scale[offset]); \
 	i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MIN(offset), \
 				  data->in_min[offset]); \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 } \
 static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
@@ -221,11 +222,11 @@ static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute
 	struct adm1025_data *data = i2c_get_clientdata(client); \
 	long val = simple_strtol(buf, NULL, 10); \
  \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	data->in_max[offset] = IN_TO_REG(val, in_scale[offset]); \
 	i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MAX(offset), \
 				  data->in_max[offset]); \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 } \
 static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
@@ -247,11 +248,11 @@ static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribut
 	struct adm1025_data *data = i2c_get_clientdata(client); \
 	long val = simple_strtol(buf, NULL, 10); \
  \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	data->temp_min[offset-1] = TEMP_TO_REG(val); \
 	i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_LOW(offset-1), \
 				  data->temp_min[offset-1]); \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 } \
 static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
@@ -261,11 +262,11 @@ static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribut
 	struct adm1025_data *data = i2c_get_clientdata(client); \
 	long val = simple_strtol(buf, NULL, 10); \
  \
-	down(&data->update_lock); \
+	mutex_lock(&data->update_lock); \
 	data->temp_max[offset-1] = TEMP_TO_REG(val); \
 	i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_HIGH(offset-1), \
 				  data->temp_max[offset-1]); \
-	up(&data->update_lock); \
+	mutex_unlock(&data->update_lock); \
 	return count; \
 } \
 static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
@@ -404,7 +405,7 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
 	/* We can fill in the remaining client fields */
 	strlcpy(new_client->name, name, I2C_NAME_SIZE);
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -523,7 +524,7 @@ static struct adm1025_data *adm1025_update_device(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adm1025_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
 		int i;
@@ -558,7 +559,7 @@ static struct adm1025_data *adm1025_update_device(struct device *dev)
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index fefe6e74fd02..6d4f8b8d358e 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -32,6 +32,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /* Addresses to scan */
 static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
@@ -260,10 +261,10 @@ struct pwm_data {
 struct adm1026_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct semaphore lock;
+	struct mutex lock;
 	enum chips type;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	int valid;		/* !=0 if following fields are valid */
 	unsigned long last_reading;	/* In jiffies */
 	unsigned long last_config;	/* In jiffies */
@@ -298,9 +299,8 @@ static int adm1026_attach_adapter(struct i2c_adapter *adapter);
 static int adm1026_detect(struct i2c_adapter *adapter, int address,
 	int kind);
 static int adm1026_detach_client(struct i2c_client *client);
-static int adm1026_read_value(struct i2c_client *client, u8 register);
-static int adm1026_write_value(struct i2c_client *client, u8 register,
-	int value); 
+static int adm1026_read_value(struct i2c_client *client, u8 reg);
+static int adm1026_write_value(struct i2c_client *client, u8 reg, int value);
 static void adm1026_print_gpio(struct i2c_client *client);
 static void adm1026_fixup_gpio(struct i2c_client *client); 
 static struct adm1026_data *adm1026_update_device(struct device *dev);
@@ -575,7 +575,7 @@ static struct adm1026_data *adm1026_update_device(struct device *dev)
 	int i;
 	long value, alarms, gpio;
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	if (!data->valid
 	    || time_after(jiffies, data->last_reading + ADM1026_DATA_INTERVAL)) {
 		/* Things that change quickly */
@@ -710,7 +710,7 @@ static struct adm1026_data *adm1026_update_device(struct device *dev)
 	dev_dbg(&client->dev, "Setting VID from GPIO11-15.\n");
 	data->vid = (data->gpio >> 11) & 0x1f;
 	data->valid = 1;
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return data;
 }
 
@@ -739,10 +739,10 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_min[nr] = INS_TO_REG(nr, val);
 	adm1026_write_value(client, ADM1026_REG_IN_MIN[nr], data->in_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count; 
 }
 static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
@@ -762,10 +762,10 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_max[nr] = INS_TO_REG(nr, val);
 	adm1026_write_value(client, ADM1026_REG_IN_MAX[nr], data->in_max[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -813,10 +813,10 @@ static ssize_t set_in16_min(struct device *dev, struct device_attribute *attr, c
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_min[16] = INS_TO_REG(16, val + NEG12_OFFSET);
 	adm1026_write_value(client, ADM1026_REG_IN_MIN[16], data->in_min[16]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count; 
 }
 static ssize_t show_in16_max(struct device *dev, struct device_attribute *attr, char *buf)
@@ -831,10 +831,10 @@ static ssize_t set_in16_max(struct device *dev, struct device_attribute *attr, c
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->in_max[16] = INS_TO_REG(16, val+NEG12_OFFSET);
 	adm1026_write_value(client, ADM1026_REG_IN_MAX[16], data->in_max[16]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -874,11 +874,11 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 	data->fan_min[nr] = FAN_TO_REG(val, data->fan_div[nr]);
 	adm1026_write_value(client, ADM1026_REG_FAN_MIN(nr),
 		data->fan_min[nr]);
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 	return count;
 }
 
@@ -939,7 +939,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
 	if (new_div == 0) {
 		return -EINVAL;
 	}
-	down(&data->update_lock);
+	mutex_lock(&data->updat