Merge branch 'x86' into docs-next

Merge the x86 docs conversion from Changbin Du, who writes:

> The kernel now uses Sphinx to generate intelligent and beautiful
> documentation from reStructuredText files. I converted all of the Linux
> x86 docs to rst format in this serias.
>
> For you to preview, please visit below url:
> http://www.bytemem.com:8080/kernel-doc/index.html
>
> Thank you!

The whole series was:

    Acked-by: Ingo Molnar <mingo@kernel.org>

35 files changed, 2559 insertions, 2060 deletions

diff --git a/Documentation/index.rst b/Documentation/index.rst
index 80a421cb935e..d65dd4934a1a 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -101,6 +101,7 @@ implementation.
 .. toctree::
    :maxdepth: 2
 
+   x86/index
    sh/index
 
 Filesystem Documentation
diff --git a/Documentation/x86/amd-memory-encryption.txt b/Documentation/x86/amd-memory-encryption.rst
index afc41f544dab..c48d452d0718 100644
--- a/Documentation/x86/amd-memory-encryption.txt
+++ b/Documentation/x86/amd-memory-encryption.rst
@@ -1,3 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+AMD Memory Encryption
+=====================
+
 Secure Memory Encryption (SME) and Secure Encrypted Virtualization (SEV) are
 features found on AMD processors.
 
@@ -34,7 +40,7 @@ is operating in 64-bit or 32-bit PAE mode, in all other modes the SEV hardware
 forces the memory encryption bit to 1.
 
 Support for SME and SEV can be determined through the CPUID instruction. The
-CPUID function 0x8000001f reports information related to SME:
+CPUID function 0x8000001f reports information related to SME::
 
 	0x8000001f[eax]:
 		Bit[0] indicates support for SME
@@ -48,14 +54,14 @@ CPUID function 0x8000001f reports information related to SME:
 			   addresses)
 
 If support for SME is present, MSR 0xc00100010 (MSR_K8_SYSCFG) can be used to
-determine if SME is enabled and/or to enable memory encryption:
+determine if SME is enabled and/or to enable memory encryption::
 
 	0xc0010010:
 		Bit[23]   0 = memory encryption features are disabled
 			  1 = memory encryption features are enabled
 
 If SEV is supported, MSR 0xc0010131 (MSR_AMD64_SEV) can be used to determine if
-SEV is active:
+SEV is active::
 
 	0xc0010131:
 		Bit[0]	  0 = memory encryption is not active
@@ -68,6 +74,7 @@ requirements for the system.  If this bit is not set upon Linux startup then
 Linux itself will not set it and memory encryption will not be possible.
 
 The state of SME in the Linux kernel can be documented as follows:
+
 	- Supported:
 	  The CPU supports SME (determined through CPUID instruction).
 
diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.rst
index 223e484a1304..08a2f100c0e6 100644
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.rst
@@ -1,5 +1,8 @@
-		     THE LINUX/x86 BOOT PROTOCOL
-		     ---------------------------
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+The Linux/x86 Boot Protocol
+===========================
 
 On the x86 platform, the Linux kernel uses a rather complicated boot
 convention.  This has evolved partially due to historical aspects, as
@@ -10,88 +13,91 @@ real-mode DOS as a mainstream operating system.
 
 Currently, the following versions of the Linux/x86 boot protocol exist.
 
-Old kernels:	zImage/Image support only.  Some very early kernels
+=============	============================================================
+Old kernels	zImage/Image support only.  Some very early kernels
 		may not even support a command line.
 
-Protocol 2.00:	(Kernel 1.3.73) Added bzImage and initrd support, as
+Protocol 2.00	(Kernel 1.3.73) Added bzImage and initrd support, as
 		well as a formalized way to communicate between the
 		boot loader and the kernel.  setup.S made relocatable,
 		although the traditional setup area still assumed
 		writable.
 
-Protocol 2.01:	(Kernel 1.3.76) Added a heap overrun warning.
+Protocol 2.01	(Kernel 1.3.76) Added a heap overrun warning.
 
-Protocol 2.02:	(Kernel 2.4.0-test3-pre3) New command line protocol.
+Protocol 2.02	(Kernel 2.4.0-test3-pre3) New command line protocol.
 		Lower the conventional memory ceiling.	No overwrite
 		of the traditional setup area, thus making booting
 		safe for systems which use the EBDA from SMM or 32-bit
 		BIOS entry points.  zImage deprecated but still
 		supported.
 
-Protocol 2.03:	(Kernel 2.4.18-pre1) Explicitly makes the highest possible
+Protocol 2.03	(Kernel 2.4.18-pre1) Explicitly makes the highest possible
 		initrd address available to the bootloader.
 
-Protocol 2.04:	(Kernel 2.6.14) Extend the syssize field to four bytes.
+Protocol 2.04	(Kernel 2.6.14) Extend the syssize field to four bytes.
 
-Protocol 2.05:	(Kernel 2.6.20) Make protected mode kernel relocatable.
+Protocol 2.05	(Kernel 2.6.20) Make protected mode kernel relocatable.
 		Introduce relocatable_kernel and kernel_alignment fields.
 
-Protocol 2.06:	(Kernel 2.6.22) Added a field that contains the size of
+Protocol 2.06	(Kernel 2.6.22) Added a field that contains the size of
 		the boot command line.
 
-Protocol 2.07:	(Kernel 2.6.24) Added paravirtualised boot protocol.
+Protocol 2.07	(Kernel 2.6.24) Added paravirtualised boot protocol.
 		Introduced hardware_subarch and hardware_subarch_data
 		and KEEP_SEGMENTS flag in load_flags.
 
-Protocol 2.08:	(Kernel 2.6.26) Added crc32 checksum and ELF format
+Protocol 2.08	(Kernel 2.6.26) Added crc32 checksum and ELF format
 		payload. Introduced payload_offset and payload_length
 		fields to aid in locating the payload.
 
-Protocol 2.09:	(Kernel 2.6.26) Added a field of 64-bit physical
+Protocol 2.09	(Kernel 2.6.26) Added a field of 64-bit physical
 		pointer to single linked list of struct	setup_data.
 
-Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
+Protocol 2.10	(Kernel 2.6.31) Added a protocol for relaxed alignment
 		beyond the kernel_alignment added, new init_size and
 		pref_address fields.  Added extended boot loader IDs.
 
-Protocol 2.11:	(Kernel 3.6) Added a field for offset of EFI handover
+Protocol 2.11	(Kernel 3.6) Added a field for offset of EFI handover
 		protocol entry point.
 
-Protocol 2.12:	(Kernel 3.8) Added the xloadflags field and extension fields
+Protocol 2.12	(Kernel 3.8) Added the xloadflags field and extension fields
 		to struct boot_params for loading bzImage and ramdisk
 		above 4G in 64bit.
 
-Protocol 2.13:	(Kernel 3.14) Support 32- and 64-bit flags being set in
+Protocol 2.13	(Kernel 3.14) Support 32- and 64-bit flags being set in
 		xloadflags to support booting a 64-bit kernel from 32-bit
 		EFI
+=============	============================================================
 
-**** MEMORY LAYOUT
 
-The traditional memory map for the kernel loader, used for Image or
-zImage kernels, typically looks like:
-
-	|			 |
-0A0000	+------------------------+
-	|  Reserved for BIOS	 |	Do not use.  Reserved for BIOS EBDA.
-09A000	+------------------------+
-	|  Command line		 |
-	|  Stack/heap		 |	For use by the kernel real-mode code.
-098000	+------------------------+	
-	|  Kernel setup		 |	The kernel real-mode code.
-090200	+------------------------+
-	|  Kernel boot sector	 |	The kernel legacy boot sector.
-090000	+------------------------+
-	|  Protected-mode kernel |	The bulk of the kernel image.
-010000	+------------------------+
-	|  Boot loader		 |	<- Boot sector entry point 0000:7C00
-001000	+------------------------+
-	|  Reserved for MBR/BIOS |
-000800	+------------------------+
-	|  Typically used by MBR |
-000600	+------------------------+ 
-	|  BIOS use only	 |
-000000	+------------------------+
+Memory Layout
+=============
 
+The traditional memory map for the kernel loader, used for Image or
+zImage kernels, typically looks like::
+
+		|			 |
+	0A0000	+------------------------+
+		|  Reserved for BIOS	 |	Do not use.  Reserved for BIOS EBDA.
+	09A000	+------------------------+
+		|  Command line		 |
+		|  Stack/heap		 |	For use by the kernel real-mode code.
+	098000	+------------------------+
+		|  Kernel setup		 |	The kernel real-mode code.
+	090200	+------------------------+
+		|  Kernel boot sector	 |	The kernel legacy boot sector.
+	090000	+------------------------+
+		|  Protected-mode kernel |	The bulk of the kernel image.
+	010000	+------------------------+
+		|  Boot loader		 |	<- Boot sector entry point 0000:7C00
+	001000	+------------------------+
+		|  Reserved for MBR/BIOS |
+	000800	+------------------------+
+		|  Typically used by MBR |
+	000600	+------------------------+
+		|  BIOS use only	 |
+	000000	+------------------------+
 
 When using bzImage, the protected-mode kernel was relocated to
 0x100000 ("high memory"), and the kernel real-mode block (boot sector,
@@ -116,36 +122,36 @@ zImage or old bzImage kernels, which need data written into the
 above the 0x9A000 point; too many BIOSes will break above that point.
 
 For a modern bzImage kernel with boot protocol version >= 2.02, a
-memory layout like the following is suggested:
-
-	~                        ~
-        |  Protected-mode kernel |
-100000  +------------------------+
-	|  I/O memory hole	 |
-0A0000	+------------------------+
-	|  Reserved for BIOS	 |	Leave as much as possible unused
-	~                        ~
-	|  Command line		 |	(Can also be below the X+10000 mark)
-X+10000	+------------------------+
-	|  Stack/heap		 |	For use by the kernel real-mode code.
-X+08000	+------------------------+	
-	|  Kernel setup		 |	The kernel real-mode code.
-	|  Kernel boot sector	 |	The kernel legacy boot sector.
-X       +------------------------+
-	|  Boot loader		 |	<- Boot sector entry point 0000:7C00
-001000	+------------------------+
-	|  Reserved for MBR/BIOS |
-000800	+------------------------+
-	|  Typically used by MBR |
-000600	+------------------------+ 
-	|  BIOS use only	 |
-000000	+------------------------+
-
-... where the address X is as low as the design of the boot loader
-permits.
-
-
-**** THE REAL-MODE KERNEL HEADER
+memory layout like the following is suggested::
+
+		~                        ~
+		|  Protected-mode kernel |
+	100000  +------------------------+
+		|  I/O memory hole	 |
+	0A0000	+------------------------+
+		|  Reserved for BIOS	 |	Leave as much as possible unused
+		~                        ~
+		|  Command line		 |	(Can also be below the X+10000 mark)
+	X+10000	+------------------------+
+		|  Stack/heap		 |	For use by the kernel real-mode code.
+	X+08000	+------------------------+
+		|  Kernel setup		 |	The kernel real-mode code.
+		|  Kernel boot sector	 |	The kernel legacy boot sector.
+	X       +------------------------+
+		|  Boot loader		 |	<- Boot sector entry point 0000:7C00
+	001000	+------------------------+
+		|  Reserved for MBR/BIOS |
+	000800	+------------------------+
+		|  Typically used by MBR |
+	000600	+------------------------+
+		|  BIOS use only	 |
+	000000	+------------------------+
+
+  ... where the address X is as low as the design of the boot loader permits.
+
+
+The Real-Mode Kernel Header
+===========================
 
 In the following text, and anywhere in the kernel boot sequence, "a
 sector" refers to 512 bytes.  It is independent of the actual sector
@@ -159,61 +165,63 @@ sectors (1K) and then examine the bootup sector size.
 
 The header looks like:
 
-Offset	Proto	Name		Meaning
-/Size
-
-01F1/1	ALL(1	setup_sects	The size of the setup in sectors
-01F2/2	ALL	root_flags	If set, the root is mounted readonly
-01F4/4	2.04+(2	syssize		The size of the 32-bit code in 16-byte paras
-01F8/2	ALL	ram_size	DO NOT USE - for bootsect.S use only
-01FA/2	ALL	vid_mode	Video mode control
-01FC/2	ALL	root_dev	Default root device number
-01FE/2	ALL	boot_flag	0xAA55 magic number
-0200/2	2.00+	jump		Jump instruction
-0202/4	2.00+	header		Magic signature "HdrS"
-0206/2	2.00+	version		Boot protocol version supported
-0208/4	2.00+	realmode_swtch	Boot loader hook (see below)
-020C/2	2.00+	start_sys_seg	The load-low segment (0x1000) (obsolete)
-020E/2	2.00+	kernel_version	Pointer to kernel version string
-0210/1	2.00+	type_of_loader	Boot loader identifier
-0211/1	2.00+	loadflags	Boot protocol option flags
-0212/2	2.00+	setup_move_size	Move to high memory size (used with hooks)
-0214/4	2.00+	code32_start	Boot loader hook (see below)
-0218/4	2.00+	ramdisk_image	initrd load address (set by boot loader)
-021C/4	2.00+	ramdisk_size	initrd size (set by boot loader)
-0220/4	2.00+	bootsect_kludge	DO NOT USE - for bootsect.S use only
-0224/2	2.01+	heap_end_ptr	Free memory after setup end
-0226/1	2.02+(3 ext_loader_ver	Extended boot loader version
-0227/1	2.02+(3	ext_loader_type	Extended boot loader ID
-0228/4	2.02+	cmd_line_ptr	32-bit pointer to the kernel command line
-022C/4	2.03+	initrd_addr_max	Highest legal initrd address
-0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
-0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
-0235/1	2.10+	min_alignment	Minimum alignment, as a power of two
-0236/2	2.12+	xloadflags	Boot protocol option flags
-0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
-023C/4	2.07+	hardware_subarch Hardware subarchitecture
-0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
-0248/4	2.08+	payload_offset	Offset of kernel payload
-024C/4	2.08+	payload_length	Length of kernel payload
-0250/8	2.09+	setup_data	64-bit physical pointer to linked list
-				of struct setup_data
-0258/8	2.10+	pref_address	Preferred loading address
-0260/4	2.10+	init_size	Linear memory required during initialization
-0264/4	2.11+	handover_offset	Offset of handover entry point
-
-(1) For backwards compatibility, if the setup_sects field contains 0, the
-    real value is 4.
-
-(2) For boot protocol prior to 2.04, the upper two bytes of the syssize
-    field are unusable, which means the size of a bzImage kernel
-    cannot be determined.
-
-(3) Ignored, but safe to set, for boot protocols 2.02-2.09.
+===========	========	=====================	============================================
+Offset/Size	Proto		Name			Meaning
+===========	========	=====================	============================================
+01F1/1		ALL(1)		setup_sects		The size of the setup in sectors
+01F2/2		ALL		root_flags		If set, the root is mounted readonly
+01F4/4		2.04+(2)	syssize			The size of the 32-bit code in 16-byte paras
+01F8/2		ALL		ram_size		DO NOT USE - for bootsect.S use only
+01FA/2		ALL		vid_mode		Video mode control
+01FC/2		ALL		root_dev		Default root device number
+01FE/2		ALL		boot_flag		0xAA55 magic number
+0200/2		2.00+		jump			Jump instruction
+0202/4		2.00+		header			Magic signature "HdrS"
+0206/2		2.00+		version			Boot protocol version supported
+0208/4		2.00+		realmode_swtch		Boot loader hook (see below)
+020C/2		2.00+		start_sys_seg		The load-low segment (0x1000) (obsolete)
+020E/2		2.00+		kernel_version		Pointer to kernel version string
+0210/1		2.00+		type_of_loader		Boot loader identifier
+0211/1		2.00+		loadflags		Boot protocol option flags
+0212/2		2.00+		setup_move_size		Move to high memory size (used with hooks)
+0214/4		2.00+		code32_start		Boot loader hook (see below)
+0218/4		2.00+		ramdisk_image		initrd load address (set by boot loader)
+021C/4		2.00+		ramdisk_size		initrd size (set by boot loader)
+0220/4		2.00+		bootsect_kludge		DO NOT USE - for bootsect.S use only
+0224/2		2.01+		heap_end_ptr		Free memory after setup end
+0226/1		2.02+(3)	ext_loader_ver		Extended boot loader version
+0227/1		2.02+(3)	ext_loader_type		Extended boot loader ID
+0228/4		2.02+		cmd_line_ptr		32-bit pointer to the kernel command line
+022C/4		2.03+		initrd_addr_max		Highest legal initrd address
+0230/4		2.05+		kernel_alignment	Physical addr alignment required for kernel
+0234/1		2.05+		relocatable_kernel	Whether kernel is relocatable or not
+0235/1		2.10+		min_alignment		Minimum alignment, as a power of two
+0236/2		2.12+		xloadflags		Boot protocol option flags
+0238/4		2.06+		cmdline_size		Maximum size of the kernel command line
+023C/4		2.07+		hardware_subarch	Hardware subarchitecture
+0240/8		2.07+		hardware_subarch_data	Subarchitecture-specific data
+0248/4		2.08+		payload_offset		Offset of kernel payload
+024C/4		2.08+		payload_length		Length of kernel payload
+0250/8		2.09+		setup_data		64-bit physical pointer to linked list
+							of struct setup_data
+0258/8		2.10+		pref_address		Preferred loading address
+0260/4		2.10+		init_size		Linear memory required during initialization
+0264/4		2.11+		handover_offset		Offset of handover entry point
+===========	========	=====================	============================================
+
+.. note::
+  (1) For backwards compatibility, if the setup_sects field contains 0, the
+      real value is 4.
+
+  (2) For boot protocol prior to 2.04, the upper two bytes of the syssize
+      field are unusable, which means the size of a bzImage kernel
+      cannot be determined.
+
+  (3) Ignored, but safe to set, for boot protocols 2.02-2.09.
 
 If the "HdrS" (0x53726448) magic number is not found at offset 0x202,
 the boot protocol version is "old".  Loading an old kernel, the
-following parameters should be assumed:
+following parameters should be assumed::
 
 	Image type = zImage
 	initrd not supported
@@ -225,7 +233,8 @@ setting fields in the header, you must make sure only to set fields
 supported by the protocol version in use.
 
 
-**** DETAILS OF HEADER FIELDS
+Details of Harder Fileds
+========================
 
 For each field, some are information from the kernel to the bootloader
 ("read"), some are expected to be filled out by the bootloader
@@ -239,106 +248,132 @@ boot loaders can ignore those fields.
 
 The byte order of all fields is littleendian (this is x86, after all.)
 
+============	===========
 Field name:	setup_sects
 Type:		read
 Offset/size:	0x1f1/1
 Protocol:	ALL
+============	===========
 
   The size of the setup code in 512-byte sectors.  If this field is
   0, the real value is 4.  The real-mode code consists of the boot
   sector (always one 512-byte sector) plus the setup code.
 
-Field name:	 root_flags
-Type:		 modify (optional)
-Offset/size:	 0x1f2/2
-Protocol:	 ALL
+============	=================
+Field name:	root_flags
+Type:		modify (optional)
+Offset/size:	0x1f2/2
+Protocol:	ALL
+============	=================
 
   If this field is nonzero, the root defaults to readonly.  The use of
   this field is deprecated; use the "ro" or "rw" options on the
   command line instead.
 
+============	===============================================
 Field name:	syssize
 Type:		read
 Offset/size:	0x1f4/4 (protocol 2.04+) 0x1f4/2 (protocol ALL)
 Protocol:	2.04+
+============	===============================================
 
   The size of the protected-mode code in units of 16-byte paragraphs.
   For protocol versions older than 2.04 this field is only two bytes
   wide, and therefore cannot be trusted for the size of a kernel if
   the LOAD_HIGH flag is set.
 
+============	===============
 Field name:	ram_size
 Type:		kernel internal
 Offset/size:	0x1f8/2
 Protocol:	ALL
+============	===============
 
   This field is obsolete.
 
+============	===================
 Field name:	vid_mode
 Type:		modify (obligatory)
 Offset/size:	0x1fa/2
+============	===================
 
   Please see the section on SPECIAL COMMAND LINE OPTIONS.
 
+============	=================
 Field name:	root_dev
 Type:		modify (optional)
 Offset/size:	0x1fc/2
 Protocol:	ALL
+============	=================
 
   The default root device device number.  The use of this field is
   deprecated, use the "root=" option on the command line instead.
 
+============	=========
 Field name:	boot_flag
 Type:		read
 Offset/size:	0x1fe/2
 Protocol:	ALL
+============	=========
 
   Contains 0xAA55.  This is the closest thing old Linux kernels have
   to a magic number.
 
+============	=======
 Field name:	jump
 Type:		read
 Offset/size:	0x200/2
 Protocol:	2.00+
+============	=======
 
   Contains an x86 jump instruction, 0xEB followed by a signed offset
   relative to byte 0x202.  This can be used to determine the size of
   the header.
 
+============	=======
 Field name:	header
 Type:		read
 Offset/size:	0x202/4
 Protocol:	2.00+
+============	=======
 
   Contains the magic number "HdrS" (0x53726448).
 
+============	=======
 Field name:	version
 Type:		read
 Offset/size:	0x206/2
 Protocol:	2.00+
+============	=======
 
   Contains the boot protocol version, in (major << 8)+minor format,
   e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
   10.17.
 
+============	=================
 Field name:	realmode_swtch
 Type:		modify (optional)
 Offset/size:	0x208/4
 Protocol:	2.00+
+============	=================
 
   Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
 
+============	=============
 Field name:	start_sys_seg
 Type:		read
 Offset/size:	0x20c/2
 Protocol:	2.00+
+============	=============
 
   The load low segment (0x1000).  Obsolete.
 
+============	==============
 Field name:	kernel_version
 Type:		read
 Offset/size:	0x20e/2
 Protocol:	2.00+
+============	==============
 
   If set to a nonzero value, contains a pointer to a NUL-terminated
   human-readable kernel version number string, less 0x200.  This can
@@ -348,17 +383,19 @@ Protocol:	2.00+
   For example, if this value is set to 0x1c00, the kernel version
   number string can be found at offset 0x1e00 in the kernel file.
   This is a valid value if and only if the "setup_sects" field
-  contains the value 15 or higher, as:
+  contains the value 15 or higher, as::
 
 	0x1c00  < 15*0x200 (= 0x1e00) but
 	0x1c00 >= 14*0x200 (= 0x1c00)
 
-	0x1c00 >> 9 = 14, so the minimum value for setup_secs is 15.
+	0x1c00 >> 9 = 14, So the minimum value for setup_secs is 15.
 
+============	==================
 Field name:	type_of_loader
 Type:		write (obligatory)
 Offset/size:	0x210/1
 Protocol:	2.00+
+============	==================
 
   If your boot loader has an assigned id (see table below), enter
   0xTV here, where T is an identifier for the boot loader and V is
@@ -369,17 +406,20 @@ Protocol:	2.00+
   Similarly, the ext_loader_ver field can be used to provide more than
   four bits for the bootloader version.
 
-  For example, for T = 0x15, V = 0x234, write:
+  For example, for T = 0x15, V = 0x234, write::
 
-  type_of_loader  <- 0xE4
-  ext_loader_type <- 0x05
-  ext_loader_ver  <- 0x23
+	type_of_loader  <- 0xE4
+	ext_loader_type <- 0x05
+	ext_loader_ver  <- 0x23
 
   Assigned boot loader ids (hexadecimal):
 
-	0  LILO			(0x00 reserved for pre-2.00 bootloader)
+	== =======================================
+	0  LILO
+	   (0x00 reserved for pre-2.00 bootloader)
 	1  Loadlin
-	2  bootsect-loader	(0x20, all other values reserved)
+	2  bootsect-loader
+	   (0x20, all other values reserved)
 	3  Syslinux
 	4  Etherboot/gPXE/iPXE
 	5  ELILO
@@ -390,55 +430,70 @@ Protocol:	2.00+
 	B  Qemu
 	C  Arcturus Networks uCbootloader
 	D  kexec-tools
-	E  Extended		(see ext_loader_type)
-	F  Special		(0xFF = undefined)
-       10  Reserved
-       11  Minimal Linux Bootloader <http://sebastian-plotz.blogspot.de>
-       12  OVMF UEFI virtualization stack
+	E  Extended (see ext_loader_type)
+	F  Special (0xFF = undefined)
+	10 Reserved
+	11 Minimal Linux Bootloader
+	   <http://sebastian-plotz.blogspot.de>
+	12 OVMF UEFI virtualization stack
+	== =======================================
 
-  Please contact <hpa@zytor.com> if you need a bootloader ID
-  value assigned.
+  Please contact <hpa@zytor.com> if you need a bootloader ID value assigned.
 
+============	===================
 Field name:	loadflags
 Type:		modify (obligatory)
 Offset/size:	0x211/1
 Protocol:	2.00+
+============	===================
 
   This field is a bitmask.
 
   Bit 0 (read):	LOADED_HIGH
+
 	- If 0, the protected-mode code is loaded at 0x10000.
 	- If 1, the protected-mode code is loaded at 0x100000.
 
   Bit 1 (kernel internal): KASLR_FLAG
+
 	- Used internally by the compressed kernel to communicate
 	  KASLR status to kernel proper.
-	  If 1, KASLR enabled.
-	  If 0, KASLR disabled.
+
+	    - If 1, KASLR enabled.
+	    - If 0, KASLR disabled.
 
   Bit 5 (write): QUIET_FLAG
+
 	- If 0, print early messages.
 	- If 1, suppress early messages.
+
 		This requests to the kernel (decompressor and early
 		kernel) to not write early messages that require
 		accessing the display hardware directly.
 
   Bit 6 (write): KEEP_SEGMENTS
+
 	Protocol: 2.07+
+
 	- If 0, reload the segment registers in the 32bit entry point.
 	- If 1, do not reload the segment registers in the 32bit entry point.
+
 		Assume that %cs %ds %ss %es are all set to flat segments with
 		a base of 0 (or the equivalent for their environment).
 
   Bit 7 (write): CAN_USE_HEAP
+
 	Set this bit to 1 to indicate that the value entered in the
 	heap_end_ptr is valid.  If this field is clear, some setup code
 	functionality will be disabled.
 
+
+============	===================
 Field name:	setup_move_size
 Type:		modify (obligatory)
 Offset/size:	0x212/2
 Protocol:	2.00-2.01
+============	===================
 
   When using protocol 2.00 or 2.01, if the real mode kernel is not
   loaded at 0x90000, it gets moved there later in the loading
@@ -447,14 +502,16 @@ Protocol:	2.00-2.01
   itself.
 
   The unit is bytes starting with the beginning of the boot sector.
-  
+
   This field is can be ignored when the protocol is 2.02 or higher, or
   if the real-mode code is loaded at 0x90000.
 
+============	========================
 Field name:	code32_start
 Type:		modify (optional, reloc)
 Offset/size:	0x214/4
 Protocol:	2.00+
+============	========================
 
   The address to jump to in protected mode.  This defaults to the load
   address of the kernel, and can be used by the boot loader to
@@ -462,47 +519,57 @@ Protocol:	2.00+
 
   This field can be modified for two purposes:
 
-  1. as a boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
+    1. as a boot loader hook (see Advanced Boot Loader Hooks below.)
 
-  2. if a bootloader which does not install a hook loads a
-     relocatable kernel at a nonstandard address it will have to modify
-     this field to point to the load address.
+    2. if a bootloader which does not install a hook loads a
+       relocatable kernel at a nonstandard address it will have to modify
+       this field to point to the load address.
 
+============	==================
 Field name:	ramdisk_image
 Type:		write (obligatory)
 Offset/size:	0x218/4
 Protocol:	2.00+
+============	==================
 
   The 32-bit linear address of the initial ramdisk or ramfs.  Leave at
   zero if there is no initial ramdisk/ramfs.
 
+============	==================
 Field name:	ramdisk_size
 Type:		write (obligatory)
 Offset/size:	0x21c/4
 Protocol:	2.00+
+============	==================
 
   Size of the initial ramdisk or ramfs.  Leave at zero if there is no
   initial ramdisk/ramfs.
 
+============	===============
 Field name:	bootsect_kludge
 Type:		kernel internal
 Offset/size:	0x220/4
 Protocol:	2.00+
+============	===============
 
   This field is obsolete.
 
+============	==================
 Field name:	heap_end_ptr
 Type:		write (obligatory)
 Offset/size:	0x224/2
 Protocol:	2.01+
+============	==================
 
   Set this field to the offset (from the beginning of the real-mode