Merge tag 'mmc-v3.20-1' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Support for MMC power sequences.
   - SDIO function devicetree subnode parsing.
   - Refactor the hardware reset routines and enable it for SD cards.
   - Various code quality improvements, especially for slot-gpio.

  MMC host:
   - dw_mmc: Various fixes and cleanups.
   - dw_mmc: Convert to mmc_send_tuning().
   - moxart: Fix probe logic.
   - sdhci: Various fixes and cleanups
   - sdhci: Asynchronous request handling support.
   - sdhci-pxav3: Various fixes and cleanups.
   - sdhci-tegra: Fixes for T114, T124 and T132.
   - rtsx: Various fixes and cleanups.
   - rtsx: Support for SDIO.
   - sdhi/tmio: Refactor and cleanup of header files.
   - omap_hsmmc: Use slot-gpio and common MMC DT parser.
   - Make all hosts to deal with errors from mmc_of_parse().
   - sunxi: Various fixes and cleanups.
   - sdhci: Support for Fujitsu SDHCI controller f_sdh30"

* tag 'mmc-v3.20-1' of git://git.linaro.org/people/ulf.hansson/mmc: (117 commits)
  mmc: sdhci-s3c: solve problem with sleeping in atomic context
  mmc: pwrseq: add driver for emmc hardware reset
  mmc: moxart: fix probe logic
  mmc: core: Invoke mmc_pwrseq_post_power_on() prior MMC_POWER_ON state
  mmc: pwrseq_simple: Add optional reference clock support
  mmc: pwrseq: Document optional clock for the simple power sequence
  mmc: pwrseq_simple: Extend to support more pins
  mmc: pwrseq: Document that simple sequence support more than one GPIO
  mmc: Add hardware dependencies for sdhci-pxav3 and sdhci-pxav2
  mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes
  mmc: sdhci-pxav3: Extend binding with SDIO3 conf reg for the Armada 38x
  mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951
  mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x flavor
  mmc: sdhci: switch voltage before sdhci_set_ios in runtime resume
  mmc: tegra: Write xfer_mode, CMD regs in together
  mmc: Resolve BKOPS compatability issue
  mmc: sdhci-pxav3: fix setting of pdata->clk_delay_cycles
  mmc: dw_mmc: rockchip: remove incorrect __exit_p()
  mmc: dw_mmc: exynos: remove incorrect __exit_p()
  mmc: Fix menuconfig alignment of MMC_SDHCI_* options
  ...

68 files changed, 2152 insertions, 1180 deletions

diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
new file mode 100644
index 000000000000..0cb827bf9435
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
@@ -0,0 +1,25 @@
+* The simple eMMC hardware reset provider
+
+The purpose of this driver is to perform standard eMMC hw reset
+procedure, as descibed by Jedec 4.4 specification. This procedure is
+performed just after MMC core enabled power to the given mmc host (to
+fix possible issues if bootloader has left eMMC card in initialized or
+unknown state), and before performing complete system reboot (also in
+case of emergency reboot call). The latter is needed on boards, which
+doesn't have hardware reset logic connected to emmc card and (limited or
+broken) ROM bootloaders are unable to read second stage from the emmc
+card if the card is left in unknown or already initialized state.
+
+Required properties:
+- compatible : contains "mmc-pwrseq-emmc".
+- reset-gpios : contains a GPIO specifier. The reset GPIO is asserted
+	and then deasserted to perform eMMC card reset. To perform
+	reset procedure as described in Jedec 4.4 specification, the
+	gpio line should be defined as GPIO_ACTIVE_LOW.
+
+Example:
+
+	sdhci0_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	}
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
new file mode 100644
index 000000000000..a462c50f19a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
@@ -0,0 +1,25 @@
+* The simple MMC power sequence provider
+
+The purpose of the simple MMC power sequence provider is to supports a set of
+common properties between various SOC designs. It thus enables us to use the
+same provider for several SOC designs.
+
+Required properties:
+- compatible : contains "mmc-pwrseq-simple".
+
+Optional properties:
+- reset-gpios : contains a list of GPIO specifiers. The reset GPIOs are asserted
+	at initialization and prior we start the power up procedure of the card.
+	They will be de-asserted right after the power has been provided to the
+	card.
+- clocks : Must contain an entry for the entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entry:
+  "ext_clock" (External clock provided to the card).
+
+Example:
+
+	sdhci0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio1 12 0>;
+	}
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index b52628b18a53..438899e8829b 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -64,7 +64,43 @@ Optional SDIO properties:
 - keep-power-in-suspend: Preserves card power during a suspend/resume cycle
 - enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion
 
-Example:
+
+MMC power sequences:
+--------------------
+
+System on chip designs may specify a specific MMC power sequence. To
+successfully detect an (e)MMC/SD/SDIO card, that power sequence must be
+maintained while initializing the card.
+
+Optional property:
+- mmc-pwrseq: phandle to the MMC power sequence node. See "mmc-pwrseq-*"
+	for documentation of MMC power sequence bindings.
+
+
+Use of Function subnodes
+------------------------
+
+On embedded systems the cards connected to a host may need additional
+properties. These can be specified in subnodes to the host controller node.
+The subnodes are identified by the standard 'reg' property.
+Which information exactly can be specified depends on the bindings for the
+SDIO function driver for the subnode, as specified by the compatible string.
+
+Required host node properties when using function subnodes:
+- #address-cells: should be one. The cell is the slot id.
+- #size-cells: should be zero.
+
+Required function subnode properties:
+- compatible: name of SDIO function following generic names recommended practice
+- reg: Must contain the SDIO function number of the function this subnode
+       describes. A value of 0 denotes the memory SD function, values from
+       1 to 7 denote the SDIO functions.
+
+
+Examples
+--------
+
+Basic example:
 
 sdhci@ab000000 {
 	compatible = "sdhci";
@@ -77,4 +113,28 @@ sdhci@ab000000 {
 	max-frequency = <50000000>;
 	keep-power-in-suspend;
 	enable-sdio-wakeup;
+	mmc-pwrseq = <&sdhci0_pwrseq>
 }
+
+Example with sdio function subnode:
+
+mmc3: mmc@01c12000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&sdhci0_pwrseq>
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm43xx-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <10 8>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
new file mode 100644
index 000000000000..de2c53cff4f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
@@ -0,0 +1,30 @@
+* Fujitsu SDHCI controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci_f_sdh30 driver.
+
+Required properties:
+- compatible: "fujitsu,mb86s70-sdhci-3.0"
+- clocks: Must contain an entry for each entry in clock-names. It is a
+  list of phandles and clock-specifier pairs.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Should contain the following two entries:
+	"iface" - clock used for sdhci interface
+	"core"  - core clock for sdhci controller
+
+Optional properties:
+- vqmmc-supply: phandle to the regulator device tree node, mentioned
+  as the VCCQ/VDD_IO supply in the eMMC/SD specs.
+
+Example:
+
+	sdhci1: mmc@36600000 {
+		compatible = "fujitsu,mb86s70-sdhci-3.0";
+		reg = <0 0x36600000 0x1000>;
+		interrupts = <0 172 0x4>,
+			     <0 173 0x4>;
+		bus-width = <4>;
+		vqmmc-supply = <&vccq_sdhci1>;
+		clocks = <&clock 2 2 0>, <&clock 2 3 0>;
+		clock-names = "iface", "core";
+	};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
index 4dd6deb90719..3d1b449d6097 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
@@ -9,9 +9,13 @@ Required properties:
 - reg:
   * for "mrvl,pxav2-mmc" and "mrvl,pxav3-mmc", one register area for
     the SDHCI registers.
-  * for "marvell,armada-380-sdhci", two register areas. The first one
-    for the SDHCI registers themselves, and the second one for the
-    AXI/Mbus bridge registers of the SDHCI unit.
+
+  * for "marvell,armada-380-sdhci", three register areas. The first
+    one for the SDHCI registers themselves, the second one for the
+    AXI/Mbus bridge registers of the SDHCI unit, the third one for the
+    SDIO3 Configuration register
+- reg names: should be "sdhci", "mbus", "conf-sdio3". only mandatory
+  for "marvell,armada-380-sdhci"
 - clocks: Array of clocks required for SDHCI; requires at least one for
     I/O clock.
 - clock-names: Array of names corresponding to clocks property; shall be
@@ -35,7 +39,10 @@ sdhci@d4280800 {
 
 sdhci@d8000 {
 	compatible = "marvell,armada-380-sdhci";
-	reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+	reg-names = "sdhci", "mbus", "conf-sdio3";
+	reg = <0xd8000 0x1000>,
+		<0xdc000 0x100>;
+		<0x18454 0x4>;
 	interrupts = <0 25 0x4>;
 	clocks = <&gateclk 17>;
 	clock-names = "io";
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7f1708738c30..969e1003dd92 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -254,12 +254,14 @@ static void pandora_wl1251_init_card(struct mmc_card *card)
 	 * We have TI wl1251 attached to MMC3. Pass this information to
 	 * SDIO core because it can't be probed by normal methods.
 	 */
-	card->quirks |= MMC_QUIRK_NONSTD_SDIO;
-	card->cccr.wide_bus = 1;
-	card->cis.vendor = 0x104c;
-	card->cis.device = 0x9066;
-	card->cis.blksize = 512;
-	card->cis.max_dtr = 20000000;
+	if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
+		card->quirks |= MMC_QUIRK_NONSTD_SDIO;
+		card->cccr.wide_bus = 1;
+		card->cis.vendor = 0x104c;
+		card->cis.device = 0x9066;
+		card->cis.blksize = 512;
+		card->cis.max_dtr = 20000000;
+	}
 }
 
 static struct omap2_hsmmc_info omap3pandora_mmc[] = {
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 4409d79ed650..c69afb5e264e 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -2147,7 +2147,7 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
 	 */
 
 	snprintf(md->disk->disk_name, sizeof(md->disk->disk_name),
-		 "mmcblk%d%s", md->name_idx, subname ? subname : "");
+		 "mmcblk%u%s", md->name_idx, subname ? subname : "");
 
 	if (mmc_card_mmc(card))
 		blk_queue_logical_block_size(md->queue.queue,
@@ -2193,7 +2193,6 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
 static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
 {
 	sector_t size;
-	struct mmc_blk_data *md;
 
 	if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) {
 		/*
@@ -2209,9 +2208,8 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
 		size = card->csd.capacity << (card->csd.read_blkbits - 9);
 	}
 
-	md = mmc_blk_alloc_req(card, &card->dev, size, false, NULL,
+	return mmc_blk_alloc_req(card, &card->dev, size, false, NULL,
 					MMC_BLK_DATA_AREA_MAIN);
-	return md;
 }
 
 static int mmc_blk_alloc_part(struct mmc_card *card,
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index 0a7430f94d29..7dac4695163b 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -2342,20 +2342,16 @@ static int mmc_test_hw_reset(struct mmc_test_card *test)
 	struct mmc_host *host = card->host;
 	int err;
 
-	err = mmc_hw_reset_check(host);
+	if (!mmc_card_mmc(card) || !mmc_can_reset(card))
+		return RESULT_UNSUP_CARD;
+
+	err = mmc_hw_reset(host);
 	if (!err)
 		return RESULT_OK;
+	else if (err == -EOPNOTSUPP)
+		return RESULT_UNSUP_HOST;
 
-	if (err == -ENOSYS)
-		return RESULT_FAIL;
-
-	if (err != -EOPNOTSUPP)
-		return err;
-
-	if (!mmc_can_reset(card))
-		return RESULT_UNSUP_CARD;
-
-	return RESULT_UNSUP_HOST;
+	return RESULT_FAIL;
 }
 
 static const struct mmc_test_case mmc_test_cases[] = {
diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile
index 38ed210ce2f3..2c25138f28b7 100644
--- a/drivers/mmc/core/Makefile
+++ b/drivers/mmc/core/Makefile
@@ -8,5 +8,5 @@ mmc_core-y			:= core.o bus.o host.o \
 				   sdio.o sdio_ops.o sdio_bus.o \
 				   sdio_cis.o sdio_io.o sdio_irq.o \
 				   quirks.o slot-gpio.o
-
+mmc_core-$(CONFIG_OF)		+= pwrseq.o pwrseq_simple.o pwrseq_emmc.o
 mmc_core-$(CONFIG_DEBUG_FS)	+= debugfs.o
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 86d271148528..c5ef10065a4a 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
+#include <linux/of.h>
 #include <linux/pm_runtime.h>
 
 #include <linux/mmc/card.h>
@@ -321,6 +322,8 @@ int mmc_add_card(struct mmc_card *card)
 #endif
 	mmc_init_context_info(card->host);
 
+	card->dev.of_node = mmc_of_find_child_device(card->host, 0);
+
 	ret = device_add(&card->dev);
 	if (ret)
 		return ret;
@@ -349,6 +352,7 @@ void mmc_remove_card(struct mmc_card *card)
 				mmc_hostname(card->host), card->rca);
 		}
 		device_del(&card->dev);
+		of_node_put(card->dev.of_node);
 	}
 
 	put_device(&card->dev);
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 9584bffa8b22..23f10f72e5f3 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -40,6 +40,7 @@
 #include "bus.h"
 #include "host.h"
 #include "sdio_bus.h"
+#include "pwrseq.h"
 
 #include "mmc_ops.h"
 #include "sd_ops.h"
@@ -185,13 +186,14 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
 
 EXPORT_SYMBOL(mmc_request_done);
 
-static void
-mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
+static int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 {
 #ifdef CONFIG_MMC_DEBUG
 	unsigned int i, sz;
 	struct scatterlist *sg;
 #endif
+	if (mmc_card_removed(host->card))
+		return -ENOMEDIUM;
 
 	if (mrq->sbc) {
 		pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n",
@@ -251,6 +253,8 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 	mmc_host_clk_hold(host);
 	led_trigger_event(host->led, LED_FULL);
 	host->ops->request(host, mrq);
+
+	return 0;
 }
 
 /**
@@ -271,7 +275,7 @@ void mmc_start_bkops(struct mmc_card *card, bool from_exception)
 
 	BUG_ON(!card);
 
-	if (!card->ext_csd.bkops_en || mmc_card_doing_bkops(card))
+	if (!card->ext_csd.man_bkops_en || mmc_card_doing_bkops(card))
 		return;
 
 	err = mmc_read_bkops_status(card);
@@ -345,29 +349,34 @@ static void mmc_wait_done(struct mmc_request *mrq)
  */
 static int __mmc_start_data_req(struct mmc_host *host, struct mmc_request *mrq)
 {
+	int err;
+
 	mrq->done = mmc_wait_data_done;
 	mrq->host = host;
-	if (mmc_card_removed(host->card)) {
-		mrq->cmd->error = -ENOMEDIUM;
+
+	err = mmc_start_request(host, mrq);
+	if (err) {
+		mrq->cmd->error = err;
 		mmc_wait_data_done(mrq);
-		return -ENOMEDIUM;
 	}
-	mmc_start_request(host, mrq);
 
-	return 0;
+	return err;
 }
 
 static int __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq)
 {
+	int err;
+
 	init_completion(&mrq->completion);
 	mrq->done = mmc_wait_done;
-	if (mmc_card_removed(host->card)) {
-		mrq->cmd->error = -ENOMEDIUM;
+
+	err = mmc_start_request(host, mrq);
+	if (err) {
+		mrq->cmd->error = err;
 		complete(&mrq->completion);
-		return -ENOMEDIUM;
 	}
-	mmc_start_request(host, mrq);
-	return 0;
+
+	return err;
 }
 
 /*
@@ -1077,6 +1086,30 @@ void mmc_set_ungated(struct mmc_host *host)
 }
 #endif
 
+int mmc_execute_tuning(struct mmc_card *card)
+{
+	struct mmc_host *host = card->host;
+	u32 opcode;
+	int err;
+
+	if (!host->ops->execute_tuning)
+		return 0;
+
+	if (mmc_card_mmc(card))
+		opcode = MMC_SEND_TUNING_BLOCK_HS200;
+	else
+		opcode = MMC_SEND_TUNING_BLOCK;
+
+	mmc_host_clk_hold(host);
+	err = host->ops->execute_tuning(host, opcode);
+	mmc_host_clk_release(host);
+
+	if (err)
+		pr_err("%s: tuning execution failed\n", mmc_hostname(host));
+
+	return err;
+}
+
 /*
  * Change the bus mode (open drain/push-pull) of a host.
  */
@@ -1232,6 +1265,34 @@ EXPORT_SYMBOL(mmc_of_parse_voltage);
 
 #endif /* CONFIG_OF */
 
+static int mmc_of_get_func_num(struct device_node *node)
+{
+	u32 reg;
+	int ret;
+
+	ret = of_property_read_u32(node, "reg", &reg);
+	if (ret < 0)
+		return ret;
+
+	return reg;
+}
+
+struct device_node *mmc_of_find_child_device(struct mmc_host *host,
+		unsigned func_num)
+{
+	struct device_node *node;
+
+	if (!host->parent || !host->parent->of_node)
+		return NULL;
+
+	for_each_child_of_node(host->parent->of_node, node) {
+		if (mmc_of_get_func_num(node) == func_num)
+			return node;
+	}
+
+	return NULL;
+}
+
 #ifdef CONFIG_REGULATOR
 
 /**
@@ -1555,6 +1616,8 @@ void mmc_power_up(struct mmc_host *host, u32 ocr)
 
 	mmc_host_clk_hold(host);
 
+	mmc_pwrseq_pre_power_on(host);
+
 	host->ios.vdd = fls(ocr) - 1;
 	host->ios.power_mode = MMC_POWER_UP;
 	/* Set initial state and call mmc_set_ios */
@@ -1574,6 +1637,8 @@ void mmc_power_up(struct mmc_host *host, u32 ocr)
 	 */
 	mmc_delay(10);
 
+	mmc_pwrseq_post_power_on(host);
+
 	host->ios.clock = host->f_init;
 
 	host->ios.power_mode = MMC_POWER_ON;
@@ -1595,6 +1660,8 @@ void mmc_power_off(struct mmc_host *host)