diff options
| author | Mauro Carvalho Chehab <mchehab@s-opensource.com> | 2017-08-30 13:45:20 -0400 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@s-opensource.com> | 2017-09-05 05:57:35 -0400 |
| commit | 9d5e27cbc117671959a9f625e51c754f5a0666e3 (patch) | |
| tree | 93e17e7188062a82e851e4112ca0732b9cea90de | |
| parent | 8220ead805b6bab4ade2839857a198e9708b07de (diff) | |
media: dvb frontend docs: use kernel-doc documentation
Now that frontend.h contains most documentation for the frontend,
remove the duplicated information from Documentation/ and use the
kernel-doc auto-generated one instead.
That should simplify maintainership of DVB frontend uAPI, as most
of the documentation will stick with the header file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
17 files changed, 313 insertions, 1859 deletions
diff --git a/Documentation/media/frontend.h.rst.exceptions b/Documentation/media/frontend.h.rst.exceptions index 7656770f1936..f7c4df620a52 100644 --- a/Documentation/media/frontend.h.rst.exceptions +++ b/Documentation/media/frontend.h.rst.exceptions @@ -25,19 +25,9 @@ ignore define DTV_MAX_COMMAND ignore define MAX_DTV_STATS ignore define DTV_IOCTL_MAX_MSGS -# Stats enum is documented altogether -replace enum fecap_scale_params :ref:`frontend-stat-properties` -replace symbol FE_SCALE_COUNTER frontend-stat-properties -replace symbol FE_SCALE_DECIBEL frontend-stat-properties -replace symbol FE_SCALE_NOT_AVAILABLE frontend-stat-properties -replace symbol FE_SCALE_RELATIVE frontend-stat-properties - # the same reference is used for both get and set ioctls replace ioctl FE_SET_PROPERTY :c:type:`FE_GET_PROPERTY` -# Ignore struct used only internally at Kernel -ignore struct dtv_cmds_h - # Typedefs that use the enum reference replace typedef fe_sec_voltage_t :c:type:`fe_sec_voltage` @@ -45,3 +35,178 @@ replace typedef fe_sec_voltage_t :c:type:`fe_sec_voltage` replace define FE_TUNE_MODE_ONESHOT :c:func:`FE_SET_FRONTEND_TUNE_MODE` replace define LNA_AUTO dtv-lna replace define NO_STREAM_ID_FILTER dtv-stream-id + +# Those enums are defined at the frontend.h header, and not externally + +ignore symbol FE_IS_STUPID +ignore symbol FE_CAN_INVERSION_AUTO +ignore symbol FE_CAN_FEC_1_2 +ignore symbol FE_CAN_FEC_2_3 +ignore symbol FE_CAN_FEC_3_4 +ignore symbol FE_CAN_FEC_4_5 +ignore symbol FE_CAN_FEC_5_6 +ignore symbol FE_CAN_FEC_6_7 +ignore symbol FE_CAN_FEC_7_8 +ignore symbol FE_CAN_FEC_8_9 +ignore symbol FE_CAN_FEC_AUTO +ignore symbol FE_CAN_QPSK +ignore symbol FE_CAN_QAM_16 +ignore symbol FE_CAN_QAM_32 +ignore symbol FE_CAN_QAM_64 +ignore symbol FE_CAN_QAM_128 +ignore symbol FE_CAN_QAM_256 +ignore symbol FE_CAN_QAM_AUTO +ignore symbol FE_CAN_TRANSMISSION_MODE_AUTO +ignore symbol FE_CAN_BANDWIDTH_AUTO +ignore symbol FE_CAN_GUARD_INTERVAL_AUTO +ignore symbol FE_CAN_HIERARCHY_AUTO +ignore symbol FE_CAN_8VSB +ignore symbol FE_CAN_16VSB +ignore symbol FE_HAS_EXTENDED_CAPS +ignore symbol FE_CAN_MULTISTREAM +ignore symbol FE_CAN_TURBO_FEC +ignore symbol FE_CAN_2G_MODULATION +ignore symbol FE_NEEDS_BENDING +ignore symbol FE_CAN_RECOVER +ignore symbol FE_CAN_MUTE_TS + +ignore symbol QPSK +ignore symbol QAM_16 +ignore symbol QAM_32 +ignore symbol QAM_64 +ignore symbol QAM_128 +ignore symbol QAM_256 +ignore symbol QAM_AUTO +ignore symbol VSB_8 +ignore symbol VSB_16 +ignore symbol PSK_8 +ignore symbol APSK_16 +ignore symbol APSK_32 +ignore symbol DQPSK +ignore symbol QAM_4_NR + +ignore symbol SEC_VOLTAGE_13 +ignore symbol SEC_VOLTAGE_18 +ignore symbol SEC_VOLTAGE_OFF + +ignore symbol SEC_TONE_ON +ignore symbol SEC_TONE_OFF + +ignore symbol SEC_MINI_A +ignore symbol SEC_MINI_B + +ignore symbol FE_NONE +ignore symbol FE_HAS_SIGNAL +ignore symbol FE_HAS_CARRIER +ignore symbol FE_HAS_VITERBI +ignore symbol FE_HAS_SYNC +ignore symbol FE_HAS_LOCK +ignore symbol FE_REINIT +ignore symbol FE_TIMEDOUT + +ignore symbol FEC_NONE +ignore symbol FEC_1_2 +ignore symbol FEC_2_3 +ignore symbol FEC_3_4 +ignore symbol FEC_4_5 +ignore symbol FEC_5_6 +ignore symbol FEC_6_7 +ignore symbol FEC_7_8 +ignore symbol FEC_8_9 +ignore symbol FEC_AUTO +ignore symbol FEC_3_5 +ignore symbol FEC_9_10 +ignore symbol FEC_2_5 + +ignore symbol TRANSMISSION_MODE_AUTO +ignore symbol TRANSMISSION_MODE_1K +ignore symbol TRANSMISSION_MODE_2K +ignore symbol TRANSMISSION_MODE_8K +ignore symbol TRANSMISSION_MODE_4K +ignore symbol TRANSMISSION_MODE_16K +ignore symbol TRANSMISSION_MODE_32K +ignore symbol TRANSMISSION_MODE_C1 +ignore symbol TRANSMISSION_MODE_C3780 +ignore symbol TRANSMISSION_MODE_2K +ignore symbol TRANSMISSION_MODE_8K + +ignore symbol GUARD_INTERVAL_AUTO +ignore symbol GUARD_INTERVAL_1_128 +ignore symbol GUARD_INTERVAL_1_32 +ignore symbol GUARD_INTERVAL_1_16 +ignore symbol GUARD_INTERVAL_1_8 +ignore symbol GUARD_INTERVAL_1_4 +ignore symbol GUARD_INTERVAL_19_128 +ignore symbol GUARD_INTERVAL_19_256 +ignore symbol GUARD_INTERVAL_PN420 +ignore symbol GUARD_INTERVAL_PN595 +ignore symbol GUARD_INTERVAL_PN945 + +ignore symbol HIERARCHY_NONE +ignore symbol HIERARCHY_AUTO +ignore symbol HIERARCHY_1 +ignore symbol HIERARCHY_2 +ignore symbol HIERARCHY_4 + +ignore symbol INTERLEAVING_NONE +ignore symbol INTERLEAVING_AUTO +ignore symbol INTERLEAVING_240 +ignore symbol INTERLEAVING_720 + +ignore symbol PILOT_ON +ignore symbol PILOT_OFF +ignore symbol PILOT_AUTO + +ignore symbol ROLLOFF_35 +ignore symbol ROLLOFF_20 +ignore symbol ROLLOFF_25 +ignore symbol ROLLOFF_AUTO + +ignore symbol INVERSION_ON +ignore symbol INVERSION_OFF +ignore symbol INVERSION_AUTO + +ignore symbol SYS_UNDEFINED +ignore symbol SYS_DVBC_ANNEX_A +ignore symbol SYS_DVBC_ANNEX_B +ignore symbol SYS_DVBC_ANNEX_C +ignore symbol SYS_ISDBC +ignore symbol SYS_DVBT +ignore symbol SYS_DVBT2 +ignore symbol SYS_ISDBT +ignore symbol SYS_ATSC +ignore symbol SYS_ATSCMH +ignore symbol SYS_DTMB +ignore symbol SYS_DVBS +ignore symbol SYS_DVBS2 +ignore symbol SYS_TURBO +ignore symbol SYS_ISDBS +ignore symbol SYS_DAB +ignore symbol SYS_DSS +ignore symbol SYS_CMMB +ignore symbol SYS_DVBH + +ignore symbol ATSCMH_SCCC_BLK_SEP +ignore symbol ATSCMH_SCCC_BLK_COMB +ignore symbol ATSCMH_SCCC_BLK_RES + +ignore symbol ATSCMH_SCCC_CODE_HLF +ignore symbol ATSCMH_SCCC_CODE_QTR +ignore symbol ATSCMH_SCCC_CODE_RES + +ignore symbol ATSCMH_RSFRAME_ENS_PRI +ignore symbol ATSCMH_RSFRAME_ENS_SEC + +ignore symbol ATSCMH_RSFRAME_PRI_ONLY +ignore symbol ATSCMH_RSFRAME_PRI_SEC +ignore symbol ATSCMH_RSFRAME_RES + +ignore symbol ATSCMH_RSCODE_211_187 +ignore symbol ATSCMH_RSCODE_223_187 +ignore symbol ATSCMH_RSCODE_235_187 +ignore symbol ATSCMH_RSCODE_RES + +ignore symbol FE_SCALE_NOT_AVAILABLE +ignore symbol FE_SCALE_DECIBEL +ignore symbol FE_SCALE_RELATIVE +ignore symbol FE_SCALE_COUNTER diff --git a/Documentation/media/uapi/dvb/dtv-fe-stats.rst b/Documentation/media/uapi/dvb/dtv-fe-stats.rst deleted file mode 100644 index e8a02a1f138d..000000000000 --- a/Documentation/media/uapi/dvb/dtv-fe-stats.rst +++ /dev/null @@ -1,17 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. c:type:: dtv_fe_stats - -******************* -struct dtv_fe_stats -******************* - - -.. code-block:: c - - #define MAX_DTV_STATS 4 - - struct dtv_fe_stats { - __u8 len; - struct dtv_stats stat[MAX_DTV_STATS]; - } __packed; diff --git a/Documentation/media/uapi/dvb/dtv-properties.rst b/Documentation/media/uapi/dvb/dtv-properties.rst deleted file mode 100644 index 48c4e834ad11..000000000000 --- a/Documentation/media/uapi/dvb/dtv-properties.rst +++ /dev/null @@ -1,15 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. c:type:: dtv_properties - -********************* -struct dtv_properties -********************* - - -.. code-block:: c - - struct dtv_properties { - __u32 num; - struct dtv_property *props; - }; diff --git a/Documentation/media/uapi/dvb/dtv-property.rst b/Documentation/media/uapi/dvb/dtv-property.rst deleted file mode 100644 index 3ddc3474b00e..000000000000 --- a/Documentation/media/uapi/dvb/dtv-property.rst +++ /dev/null @@ -1,31 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. c:type:: dtv_property - -******************* -struct dtv_property -******************* - - -.. code-block:: c - - /* Reserved fields should be set to 0 */ - - struct dtv_property { - __u32 cmd; - __u32 reserved[3]; - union { - __u32 data; - struct dtv_fe_stats st; - struct { - __u8 data[32]; - __u32 len; - __u32 reserved1[3]; - void *reserved2; - } buffer; - } u; - int result; - } __attribute__ ((packed)); - - /* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */ - #define DTV_IOCTL_MAX_MSGS 64 diff --git a/Documentation/media/uapi/dvb/dtv-stats.rst b/Documentation/media/uapi/dvb/dtv-stats.rst deleted file mode 100644 index 35239e72bf74..000000000000 --- a/Documentation/media/uapi/dvb/dtv-stats.rst +++ /dev/null @@ -1,18 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. c:type:: dtv_stats - -**************** -struct dtv_stats -**************** - - -.. code-block:: c - - struct dtv_stats { - __u8 scale; /* enum fecap_scale_params type */ - union { - __u64 uvalue; /* for counters and relative scales */ - __s64 svalue; /* for 1/1000 dB measures */ - }; - } __packed; diff --git a/Documentation/media/uapi/dvb/dvbproperty-006.rst b/Documentation/media/uapi/dvb/dvbproperty-006.rst deleted file mode 100644 index 3343a0f306fe..000000000000 --- a/Documentation/media/uapi/dvb/dvbproperty-006.rst +++ /dev/null @@ -1,12 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -************** -Property types -************** - -On :ref:`FE_GET_PROPERTY and FE_SET_PROPERTY <FE_GET_PROPERTY>`, -the actual action is determined by the dtv_property cmd/data pairs. -With one single ioctl, is possible to get/set up to 64 properties. The -actual meaning of each property is described on the next sections. - -The available frontend property types are shown on the next section. diff --git a/Documentation/media/uapi/dvb/dvbproperty.rst b/Documentation/media/uapi/dvb/dvbproperty.rst index 843f1d70aff0..c40943be5925 100644 --- a/Documentation/media/uapi/dvb/dvbproperty.rst +++ b/Documentation/media/uapi/dvb/dvbproperty.rst @@ -2,8 +2,9 @@ .. _frontend-properties: -DVB Frontend properties -======================= +************** +Property types +************** Tuning into a Digital TV physical channel and starting decoding it requires changing a set of parameters, in order to control the tuner, @@ -20,10 +21,15 @@ enough to group the structs that would be required for those new standards. Also, extending it would break userspace. So, the legacy union/struct based approach was deprecated, in favor -of a properties set approach. +of a properties set approach. On such approach, +:ref:`FE_GET_PROPERTY and FE_SET_PROPERTY <FE_GET_PROPERTY>` are used +to setup the frontend and read its status. + +The actual action is determined by a set of dtv_property cmd/data pairs. +With one single ioctl, is possible to get/set up to 64 properties. This section describes the new and recommended way to set the frontend, -with suppports all digital TV delivery systems. +with supports all digital TV delivery systems. .. note:: @@ -63,12 +69,9 @@ Mbauds, those properties should be sent to The code that would that would do the above is show in :ref:`dtv-prop-example`. -.. _dtv-prop-example: - -Example: Setting digital TV frontend properties -=============================================== - .. code-block:: c + :caption: Example: Setting digital TV frontend properties + :name: dtv-prop-example #include <stdio.h> #include <fcntl.h> @@ -112,17 +115,12 @@ Example: Setting digital TV frontend properties provides methods for usual operations like program scanning and to read/write channel descriptor files. - .. toctree:: :maxdepth: 1 - dtv-stats - dtv-fe-stats - dtv-property - dtv-properties - dvbproperty-006 fe_property_parameters frontend-stat-properties frontend-property-terrestrial-systems frontend-property-cable-systems frontend-property-satellite-systems + frontend-header diff --git a/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst b/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst index 302db2857f90..473855584d7f 100644 --- a/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst +++ b/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst @@ -26,8 +26,7 @@ Arguments File descriptor returned by :ref:`open() <frontend_f_open>`. ``argp`` - pointer to struct - :c:type:`dvb_diseqc_slave_reply` + pointer to struct :c:type:`dvb_diseqc_slave_reply`. Description @@ -35,42 +34,7 @@ Description Receives reply from a DiSEqC 2.0 command. -.. c:type:: dvb_diseqc_slave_reply - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - -.. flat-table:: struct dvb_diseqc_slave_reply - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - - - .. row 1 - - - uint8_t - - - msg[4] - - - DiSEqC message (framing, data[3]) - - - .. row 2 - - - uint8_t - - - msg_len - - - Length of the DiSEqC message. Valid values are 0 to 4, where 0 - means no msg - - - .. row 3 - - - int - - - timeout - - - Return from ioctl after timeout ms with errorcode when no message - was received - +The received message is stored at the buffer pointed by ``argp``. Return Value ============ diff --git a/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst b/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst index e962f6ec5aaf..54d35517e784 100644 --- a/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst +++ b/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst @@ -26,7 +26,7 @@ Arguments File descriptor returned by :ref:`open() <frontend_f_open>`. ``tone`` - an integer enumered value described at :c:type:`fe_sec_mini_cmd` + An integer enumered value described at :c:type:`fe_sec_mini_cmd`. Description @@ -39,35 +39,6 @@ read/write permissions. It provides support for what's specified at `Digital Satellite Equipment Control (DiSEqC) - Simple "ToneBurst" Detection Circuit specification. <http://www.eutelsat.com/files/contributed/satellites/pdf/Diseqc/associated%20docs/simple_tone_burst_detec.pdf>`__ -.. c:type:: fe_sec_mini_cmd - -.. flat-table:: enum fe_sec_mini_cmd - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _SEC-MINI-A: - - ``SEC_MINI_A`` - - - Sends a mini-DiSEqC 22kHz '0' Tone Burst to select satellite-A - - - .. row 3 - - - .. _SEC-MINI-B: - - ``SEC_MINI_B`` - - - Sends a mini-DiSEqC 22kHz '1' Data Burst to select satellite-B - Return Value ============ diff --git a/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst b/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst index bbcab3df39b5..7392d6747ad6 100644 --- a/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst +++ b/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst @@ -33,34 +33,7 @@ Arguments Description =========== -Sends a DiSEqC command to the antenna subsystem. - - -.. c:type:: dvb_diseqc_master_cmd - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - -.. flat-table:: struct dvb_diseqc_master_cmd - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - - - .. row 1 - - - uint8_t - - - msg[6] - - - DiSEqC message (framing, address, command, data[3]) - - - .. row 2 - - - uint8_t - - - msg_len - - - Length of the DiSEqC message. Valid values are 3 to 6 +Sends the DiSEqC command pointed by ``argp`` to the antenna subsystem. Return Value ============ diff --git a/Documentation/media/uapi/dvb/fe-get-info.rst b/Documentation/media/uapi/dvb/fe-get-info.rst index e3d64b251f61..30dde8a791f3 100644 --- a/Documentation/media/uapi/dvb/fe-get-info.rst +++ b/Documentation/media/uapi/dvb/fe-get-info.rst @@ -40,112 +40,6 @@ takes a pointer to dvb_frontend_info which is filled by the driver. When the driver is not compatible with this specification the ioctl returns an error. -.. c:type:: dvb_frontend_info - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - -.. flat-table:: struct dvb_frontend_info - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - - - .. row 1 - - - char - - - name[128] - - - Name of the frontend - - - .. row 2 - - - fe_type_t - - - type - - - **DEPRECATED**. DVBv3 type. Should not be used on modern programs, - as a frontend may have more than one type. So, the DVBv5 API - should be used instead to enumerate and select the frontend type. - - - .. row 3 - - - uint32_t - - - frequency_min - - - Minimal frequency supported by the frontend - - - .. row 4 - - - uint32_t - - - frequency_max - - - Maximal frequency supported by the frontend - - - .. row 5 - - - uint32_t - - - frequency_stepsize - - - Frequency step - all frequencies are multiple of this value - - - .. row 6 - - - uint32_t - - - frequency_tolerance - - - Tolerance of the frequency - - - .. row 7 - - - uint32_t - - - symbol_rate_min - - - Minimal symbol rate (for Cable/Satellite systems), in bauds - - - .. row 8 - - - uint32_t - - - symbol_rate_max - - - Maximal symbol rate (for Cable/Satellite systems), in bauds - - - .. row 9 - - - uint32_t - - - symbol_rate_tolerance - - - Maximal symbol rate tolerance, in ppm - - - .. row 10 - - - uint32_t - - - notifier_delay - - - **DEPRECATED**. Not used by any driver. - - - .. row 11 - - - enum :c:type:`fe_caps` - - - caps - - - Capabilities supported by the frontend - - -.. note:: - - The frequencies are specified in Hz for Terrestrial and Cable - systems. They're specified in kHz for Satellite systems - frontend capabilities ===================== @@ -153,269 +47,7 @@ frontend capabilities Capabilities describe what a frontend can do. Some capabilities are supported only on some specific frontend types. -.. c:type:: fe_caps - -.. tabularcolumns:: |p{6.5cm}|p{11.0cm}| - -.. flat-table:: enum fe_caps - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _FE-IS-STUPID: - - ``FE_IS_STUPID`` - - - There's something wrong at the frontend, and it can't report its - capabilities - - - .. row 3 - - - .. _FE-CAN-INVERSION-AUTO: - - ``FE_CAN_INVERSION_AUTO`` - - - The frontend is capable of auto-detecting inversion - - - .. row 4 - - - .. _FE-CAN-FEC-1-2: - - ``FE_CAN_FEC_1_2`` - - - The frontend supports FEC 1/2 - - - .. row 5 - - - .. _FE-CAN-FEC-2-3: - - ``FE_CAN_FEC_2_3`` - - - The frontend supports FEC 2/3 - - - .. row 6 - - - .. _FE-CAN-FEC-3-4: - - ``FE_CAN_FEC_3_4`` - - - The frontend supports FEC 3/4 - - - .. row 7 - - - .. _FE-CAN-FEC-4-5: - - ``FE_CAN_FEC_4_5`` - - - The frontend supports FEC 4/5 - - - .. row 8 - - - .. _FE-CAN-FEC-5-6: - - ``FE_CAN_FEC_5_6`` - - - The frontend supports FEC 5/6 - - - .. row 9 - - - .. _FE-CAN-FEC-6-7: - - ``FE_CAN_FEC_6_7`` - - - The frontend supports FEC 6/7 - - - .. row 10 - - - .. _FE-CAN-FEC-7-8: - - ``FE_CAN_FEC_7_8`` - - - The frontend supports FEC 7/8 - - - .. row 11 - - - .. _FE-CAN-FEC-8-9: - - ``FE_CAN_FEC_8_9`` - - - The frontend supports FEC 8/9 - - - .. row 12 - - - .. _FE-CAN-FEC-AUTO: - - ``FE_CAN_FEC_AUTO`` - - - The frontend can autodetect FEC. - - - .. row 13 - - - .. _FE-CAN-QPSK: - - ``FE_CAN_QPSK`` - - - The frontend supports QPSK modulation - - - .. row 14 - - - .. _FE-CAN-QAM-16: - - ``FE_CAN_QAM_16`` - - - The frontend supports 16-QAM modulation - - - .. row 15 - - - .. _FE-CAN-QAM-32: - - ``FE_CAN_QAM_32`` - - - The frontend supports 32-QAM modulation - - - .. row 16 - - - .. _FE-CAN-QAM-64: - - ``FE_CAN_QAM_64`` - - - The frontend supports 64-QAM modulation - - - .. row 17 - - - .. _FE-CAN-QAM-128: - - ``FE_CAN_QAM_128`` - - - The frontend supports 128-QAM modulation - - - .. row 18 - - - .. _FE-CAN-QAM-256: - - ``FE_CAN_QAM_256`` - - - The frontend supports 256-QAM modulation - - - .. row 19 - - - .. _FE-CAN-QAM-AUTO: - - ``FE_CAN_QAM_AUTO`` - - - The frontend can autodetect modulation - - - .. row 20 - - - .. _FE-CAN-TRANSMISSION-MODE-AUTO: - - ``FE_CAN_TRANSMISSION_MODE_AUTO`` - - - The frontend can autodetect the transmission mode - - - .. row 21 - - - .. _FE-CAN-BANDWIDTH-AUTO: - - ``FE_CAN_BANDWIDTH_AUTO`` - - - The frontend can autodetect the bandwidth - - - .. row 22 - - - .. _FE-CAN-GUARD-INTERVAL-AUTO: - - ``FE_CAN_GUARD_INTERVAL_AUTO`` - - - The frontend can autodetect the guard interval - - - .. row 23 - - - .. _FE-CAN-HIERARCHY-AUTO: - - ``FE_CAN_HIERARCHY_AUTO`` - - - The frontend can autodetect hierarch - - - .. row 24 - - - .. _FE-CAN-8VSB: - - ``FE_CAN_8VSB`` - - - The frontend supports 8-VSB modulation - - - .. row 25 - - - .. _FE-CAN-16VSB: - - ``FE_CAN_16VSB`` - - - The frontend supports 16-VSB modulation - - - .. row 26 - - - .. _FE-HAS-EXTENDED-CAPS: - - ``FE_HAS_EXTENDED_CAPS`` - - - Currently, unused - - - .. row 27 - - - .. _FE-CAN-MULTISTREAM: - - ``FE_CAN_MULTISTREAM`` - - - The frontend supports multistream filtering - - - .. row 28 - - - .. _FE-CAN-TURBO-FEC: - - ``FE_CAN_TURBO_FEC`` - - - The frontend supports turbo FEC modulation - - - .. row 29 - - - .. _FE-CAN-2G-MODULATION: - - ``FE_CAN_2G_MODULATION`` - - - The frontend supports "2nd generation modulation" (DVB-S2/T2)> - - - .. row 30 - - - .. _FE-NEEDS-BENDING: - - ``FE_NEEDS_BENDING`` - - - Not supported anymore, don't use it - - - .. row 31 - - - .. _FE-CAN-RECOVER: - - ``FE_CAN_RECOVER`` - - - The frontend can recover from a cable unplug automatically - - - .. row 32 - - - .. _FE-CAN-MUTE-TS: - - ``FE_CAN_MUTE_TS`` - - - The frontend can stop spurious TS data output +The frontend capabilities are described at :c:type:`fe_caps`. Return Value diff --git a/Documentation/media/uapi/dvb/fe-get-property.rst b/Documentation/media/uapi/dvb/fe-get-property.rst index 015d4db597b5..b22e37c4a787 100644 --- a/Documentation/media/uapi/dvb/fe-get-property.rst +++ b/Documentation/media/uapi/dvb/fe-get-property.rst @@ -29,7 +29,7 @@ Arguments File descriptor returned by :ref:`open() <frontend_f_open>`. ``argp`` - pointer to struct :c:type:`dtv_properties` + Pointer to struct :c:type:`dtv_properties`. Description diff --git a/Documentation/media/uapi/dvb/fe-read-status.rst b/Documentation/media/uapi/dvb/fe-read-status.rst index 76b93e386552..21b2db3591fd 100644 --- a/Documentation/media/uapi/dvb/fe-read-status.rst +++ b/Documentation/media/uapi/dvb/fe-read-status.rst @@ -52,89 +52,6 @@ The fe_status parameter is used to indicate the current state and/or state changes of the frontend hardware. It is produced using the enum :c:type:`fe_status` values on a bitmask -.. c:type:: fe_status - -.. tabularcolumns:: |p{3.5cm}|p{14.0cm}| - -.. _fe-status: - -.. flat-table:: enum fe_status - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _FE-NONE: - - ``FE_NONE`` - - - The frontend doesn't have any kind of lock. That's the initial frontend status - - - .. row 3 - - - .. _FE-HAS-SIGNAL: - - ``FE_HAS_SIGNAL`` - - - The frontend has found something above the noise level - - - .. row 4 - - - .. _FE-HAS-CARRIER: - - ``FE_HAS_CARRIER`` - - - The frontend has found a DVB signal - - - .. row 5 - - - .. _FE-HAS-VITERBI: - - ``FE_HAS_VITERBI`` - - - The frontend FEC inner coding (Viterbi, LDPC or other inner code) - is stable - - - .. row 6 - - - .. _FE-HAS-SYNC: - - ``FE_HAS_SYNC`` - - - Synchronization bytes was found - - - .. row 7 - - - .. _FE-HAS-LOCK: - - ``FE_HAS_LOCK`` - - - The DVB were locked and everything is working - - - .. row 8 - - - .. _FE-TIMEDOUT: - - ``FE_TIMEDOUT`` - - - no lock within the last about 2 seconds - - - .. row 9 - - - .. _FE-REINIT: - - ``FE_REINIT`` - - - The frontend was reinitialized, application is recommended to - reset DiSEqC, tone and parameters - Return Value ============ diff --git a/Documentation/media/uapi/dvb/fe-set-tone.rst b/Documentation/media/uapi/dvb/fe-set-tone.rst index 84e4da3fd4c9..d0950acbbe64 100644 --- a/Documentation/media/uapi/dvb/fe-set-tone.rst +++ b/Documentation/media/uapi/dvb/fe-set-tone.rst @@ -45,36 +45,6 @@ this is done using the DiSEqC ioctls. capability of selecting the band. So, it is recommended that applications would change to SEC_TONE_OFF when the device is not used. -.. c:type:: fe_sec_tone_mode - -.. flat-table:: enum fe_sec_tone_mode - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _SEC-TONE-ON: - - ``SEC_TONE_ON`` - - - Sends a 22kHz tone burst to the antenna - - - .. row 3 - - - .. _SEC-TONE-OFF: - - ``SEC_TONE_OFF`` - - - Don't send a 22kHz tone to the antenna (except if the - FE_DISEQC_* ioctls are called) - Return Value ============ diff --git a/Documentation/media/uapi/dvb/fe_property_parameters.rst b/Documentation/media/uapi/dvb/fe_property_parameters.rst index 7bb7559c4500..c6eb74f59b00 100644 --- a/Documentation/media/uapi/dvb/fe_property_parameters.rst +++ b/Documentation/media/uapi/dvb/fe_property_parameters.rst @@ -6,6 +6,11 @@ Digital TV property parameters ****************************** +There are several different Digital TV parameters that can be used by +:ref:`FE_SET_PROPERTY and FE_GET_PROPERTY ioctls<FE_GET_PROPERTY>`. +This section describes each of them. Please notice, however, that only +a subset of them are needed to setup a frontend. + .. _DTV-UNDEFINED: |