Merge tag 'wireless-drivers-next-for-davem-2018-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.17

The biggest changes are the bluetooth related patches to the rsi
driver. It adds a new bluetooth driver which communicates directly
with the wireless driver and the interface is defined in
include/net/rsi_91x.h.

Major changes:

wl1251

* read the MAC address from the NVS file

rtlwifi

* enable mac80211 fast-tx support

mt76

* add capability to select tx/rx antennas

mt7601

* let mac80211 validate rx CCMP Packet Number (PN)

rsi

* bluetooth: add new btrsi driver

* btcoex support with the new btrsi driver
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

98 files changed, 2065 insertions, 727 deletions

diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
index ba8acca036df..cb0f1aad20b7 100644
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -55,7 +55,7 @@ config BCMA_DRIVER_PCI
 
 config BCMA_DRIVER_PCI_HOSTMODE
 	bool "Driver for PCI core working in hostmode"
-	depends on MIPS && BCMA_DRIVER_PCI && PCI_DRIVERS_LEGACY
+	depends on MIPS && BCMA_DRIVER_PCI && PCI_DRIVERS_LEGACY && BCMA = y
 	help
 	  PCI core hostmode operation (external PCI bus).
 
diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
index f1eb4d3e1d57..f4161064365c 100644
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -203,7 +203,7 @@ static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
 	 * Add some delay; allow resources to come up and settle.
 	 * Delay is required for SoC (early init).
 	 */
-	mdelay(2);
+	usleep_range(2000, 2500);
 }
 
 /* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
index 925842996986..63410ecfe640 100644
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -297,6 +297,7 @@ static const struct pci_device_id bcma_pci_bridge_tbl[] = {
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_DELL, 0x0016) },
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_DELL, 0x0018) },
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_FOXCONN, 0xe092) },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_HP, 0x804a) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 07e55cd8f8c8..d8bbd661dbdb 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -392,4 +392,16 @@ config BT_QCOMSMD
 	  Say Y here to compile support for HCI over Qualcomm SMD into the
 	  kernel or say M to compile as a module.
 
+config BT_HCIRSI
+	tristate "Redpine HCI support"
+	default n
+	select RSI_COEX
+	help
+	  Redpine BT driver.
+	  This driver handles BT traffic from upper layers and pass
+	  to the RSI_91x coex module for further scheduling to device
+
+	  Say Y here to compile support for HCI over Redpine into the
+	  kernel or say M to compile as a module.
+
 endmenu
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 4e4e44d09796..03cfc1b20c4a 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -28,6 +28,8 @@ obj-$(CONFIG_BT_QCA)		+= btqca.o
 
 obj-$(CONFIG_BT_HCIUART_NOKIA)	+= hci_nokia.o
 
+obj-$(CONFIG_BT_HCIRSI)		+= btrsi.o
+
 btmrvl-y			:= btmrvl_main.o
 btmrvl-$(CONFIG_DEBUG_FS)	+= btmrvl_debugfs.o
 
diff --git a/drivers/bluetooth/btrsi.c b/drivers/bluetooth/btrsi.c
new file mode 100644
index 000000000000..5034325e417c
--- /dev/null
+++ b/drivers/bluetooth/btrsi.c
@@ -0,0 +1,188 @@
+/**
+ * Copyright (c) 2017 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+#include <asm/unaligned.h>
+#include <net/rsi_91x.h>
+#include <net/genetlink.h>
+
+#define RSI_HEADROOM_FOR_BT_HAL	16
+#define RSI_FRAME_DESC_SIZE	16
+
+struct rsi_hci_adapter {
+	void *priv;
+	struct rsi_proto_ops *proto_ops;
+	struct hci_dev *hdev;
+};
+
+static int rsi_hci_open(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int rsi_hci_close(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int rsi_hci_flush(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int rsi_hci_send_pkt(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct rsi_hci_adapter *h_adapter = hci_get_drvdata(hdev);
+	struct sk_buff *new_skb = NULL;
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		break;
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		break;
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		break;
+	}
+
+	if (skb_headroom(skb) < RSI_HEADROOM_FOR_BT_HAL) {
+		/* Insufficient skb headroom - allocate a new skb */
+		new_skb = skb_realloc_headroom(skb, RSI_HEADROOM_FOR_BT_HAL);
+		if (unlikely(!new_skb))
+			return -ENOMEM;
+		bt_cb(new_skb)->pkt_type = hci_skb_pkt_type(skb);
+		kfree_skb(skb);
+		skb = new_skb;
+	}
+
+	return h_adapter->proto_ops->coex_send_pkt(h_adapter->priv, skb,
+						   RSI_BT_Q);
+}
+
+static int rsi_hci_recv_pkt(void *priv, const u8 *pkt)
+{
+	struct rsi_hci_adapter *h_adapter = priv;
+	struct hci_dev *hdev = h_adapter->hdev;
+	struct sk_buff *skb;
+	int pkt_len = get_unaligned_le16(pkt) & 0x0fff;
+
+	skb = dev_alloc_skb(pkt_len);
+	if (!skb)
+		return -ENOMEM;
+
+	memcpy(skb->data, pkt + RSI_FRAME_DESC_SIZE, pkt_len);
+	skb_put(skb, pkt_len);
+	h_adapter->hdev->stat.byte_rx += skb->len;
+
+	hci_skb_pkt_type(skb) = pkt[14];
+
+	return hci_recv_frame(hdev, skb);
+}
+
+static int rsi_hci_attach(void *priv, struct rsi_proto_ops *ops)
+{
+	struct rsi_hci_adapter *h_adapter = NULL;
+	struct hci_dev *hdev;
+	int err = 0;
+
+	h_adapter = kzalloc(sizeof(*h_adapter), GFP_KERNEL);
+	if (!h_adapter)
+		return -ENOMEM;
+
+	h_adapter->priv = priv;
+	ops->set_bt_context(priv, h_adapter);
+	h_adapter->proto_ops = ops;
+
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		BT_ERR("Failed to alloc HCI device");
+		goto err;
+	}
+
+	h_adapter->hdev = hdev;
+
+	if (ops->get_host_intf(priv) == RSI_HOST_INTF_SDIO)
+		hdev->bus = HCI_SDIO;
+	else
+		hdev->bus = HCI_USB;
+
+	hci_set_drvdata(hdev, h_adapter);
+	hdev->dev_type = HCI_PRIMARY;
+	hdev->open = rsi_hci_open;
+	hdev->close = rsi_hci_close;
+	hdev->flush = rsi_hci_flush;
+	hdev->send = rsi_hci_send_pkt;
+
+	err = hci_register_dev(hdev);
+	if (err < 0) {
+		BT_ERR("HCI registration failed with errcode %d", err);
+		hci_free_dev(hdev);
+		goto err;
+	}
+
+	return 0;
+err:
+	h_adapter->hdev = NULL;
+	kfree(h_adapter);
+	return -EINVAL;
+}
+
+static void rsi_hci_detach(void *priv)
+{
+	struct rsi_hci_adapter *h_adapter = priv;
+	struct hci_dev *hdev;
+
+	if (!h_adapter)
+		return;
+
+	hdev = h_adapter->hdev;
+	if (hdev) {
+		hci_unregister_dev(hdev);
+		hci_free_dev(hdev);
+		h_adapter->hdev = NULL;
+	}
+
+	kfree(h_adapter);
+}
+
+const struct rsi_mod_ops rsi_bt_ops = {
+	.attach	= rsi_hci_attach,
+	.detach	= rsi_hci_detach,
+	.recv_pkt = rsi_hci_recv_pkt,
+};
+EXPORT_SYMBOL(rsi_bt_ops);
+
+static int rsi_91x_bt_module_init(void)
+{
+	return 0;
+}
+
+static void rsi_91x_bt_module_exit(void)
+{
+	return;
+}
+
+module_init(rsi_91x_bt_module_init);
+module_exit(rsi_91x_bt_module_exit);
+MODULE_AUTHOR("Redpine Signals Inc");
+MODULE_DESCRIPTION("RSI BT driver");
+MODULE_SUPPORTED_DEVICE("RSI-BT");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/wireless/admtek/Kconfig b/drivers/net/wireless/admtek/Kconfig
index d5a2dc728078..9317367e37f0 100644
--- a/drivers/net/wireless/admtek/Kconfig
+++ b/drivers/net/wireless/admtek/Kconfig
@@ -5,8 +5,8 @@ config WLAN_VENDOR_ADMTEK
 	  If you have a wireless card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about  cards. If you say Y, you will be asked for
+	  kernel: saying N will just cause the configurator to skip all the
+	  questions about these cards. If you say Y, you will be asked for
 	  your specific card in the following questions.
 
 if WLAN_VENDOR_ADMTEK
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index 44b2470af81d..82ab7c33cf97 100644
--- a/