ARM: at91: code removal of CAP9 SoC

Following removal announce and addition to feature-removal-schedule.txt,
here is the actual source code deletion for Atmel CAP9 family.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

26 files changed, 17 insertions, 2597 deletions

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index a0ffac029a0d..1bea46a54b1c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -510,17 +510,3 @@ Why:	The pci_scan_bus_parented() interface creates a new root bus.  The
 	convert to using pci_scan_root_bus() so they can supply a list of
 	bus resources when the bus is created.
 Who:	Bjorn Helgaas <bhelgaas@google.com>
-
-----------------------------
-
-What:	The CAP9 SoC family will be removed
-When:	3.4
-Files:	arch/arm/mach-at91/at91cap9.c
-	arch/arm/mach-at91/at91cap9_devices.c
-	arch/arm/mach-at91/include/mach/at91cap9.h
-	arch/arm/mach-at91/include/mach/at91cap9_matrix.h
-	arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
-	arch/arm/mach-at91/board-cap9adk.c
-Why:	The code is not actively maintained and platforms are now hard to find.
-Who:	Nicolas Ferre <nicolas.ferre@atmel.com>
-	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a48aecc17eac..92c9c79c140c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -324,7 +324,7 @@ config ARCH_AT91
 	select CLKDEV_LOOKUP
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
-	  AT91SAM9 and AT91CAP9 processors.
+	  AT91SAM9 processors.
 
 config ARCH_BCMRING
 	bool "Broadcom BCMRING"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 03646c4c13d1..b895a2a92da8 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -86,7 +86,7 @@ choice
 		depends on HAVE_AT91_DBGU0
 
 	config AT91_DEBUG_LL_DBGU1
-		bool "Kernel low-level debugging on 9263, 9g45 and cap9"
+		bool "Kernel low-level debugging on 9263 and 9g45"
 		depends on HAVE_AT91_DBGU1
 
 	config DEBUG_CLPS711X_UART1
diff --git a/arch/arm/configs/at91cap9_defconfig b/arch/arm/configs/at91cap9_defconfig
deleted file mode 100644
index 8826eb218e73..000000000000
--- a/arch/arm/configs/at91cap9_defconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91CAP9=y
-CONFIG_MACH_AT91CAP9ADK=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 71feb00a1e99..0284e66c47f9 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -102,15 +102,6 @@ config ARCH_AT91SAM9G45
 	select HAVE_AT91_DBGU1
 	select AT91_SAM9G45_RESET
 
-config ARCH_AT91CAP9
-	bool "AT91CAP9"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
-	select HAVE_AT91_DBGU1
-	select AT91_SAM9G45_RESET
-
 config ARCH_AT91X40
 	bool "AT91x40"
 	select ARCH_USES_GETTIMEOFFSET
@@ -447,21 +438,6 @@ endif
 
 # ----------------------------------------------------------
 
-if ARCH_AT91CAP9
-
-comment "AT91CAP9 Board Type"
-
-config MACH_AT91CAP9ADK
-	bool "Atmel AT91CAP9A-DK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
-
-endif
-
-# ----------------------------------------------------------
-
 if ARCH_AT91X40
 
 comment "AT91X40 Board Type"
@@ -544,7 +520,7 @@ config AT91_EARLY_DBGU0
 	depends on HAVE_AT91_DBGU0
 
 config AT91_EARLY_DBGU1
-	bool "DBGU on 9263, 9g45 and cap9"
+	bool "DBGU on 9263 and 9g45"
 	depends on HAVE_AT91_DBGU1
 
 config AT91_EARLY_USART0
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 705e1fbded39..aeb76f1690d9 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -20,7 +20,6 @@ obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_d
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
@@ -81,9 +80,6 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
 # AT91SAM board with device-tree
 obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
 
-# AT91CAP9 board-specific support
-obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
-
 # AT91X40 board-specific support
 obj-$(CONFIG_MACH_AT91EB01)	+= board-eb01.o
 
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 8ddafadfdc7d..2fd051eb2449 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -3,11 +3,7 @@
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
 #   INITRD_PHYS must be in RAM
 
-ifeq ($(CONFIG_ARCH_AT91CAP9),y)
-   zreladdr-y	+= 0x70008000
-params_phys-y	:= 0x70000100
-initrd_phys-y	:= 0x70410000
-else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
+ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
    zreladdr-y	+= 0x70008000
 params_phys-y	:= 0x70000100
 initrd_phys-y	:= 0x70410000
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
deleted file mode 100644
index 8967d75c2ea3..000000000000
--- a/arch/arm/mach-at91/at91cap9.c
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- * arch/arm/mach-at91/at91cap9.c
- *
- *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/cpu.h>
-#include <mach/at91cap9.h>
-#include <mach/at91_pmc.h>
-
-#include "soc.h"
-#include "generic.h"
-#include "clock.h"
-#include "sam9_smc.h"
-
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioABCD_clk = {
-	.name		= "pioABCD_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_PIOABCD,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb0_clk = {
-	.name		= "mpb0_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MPB0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb1_clk = {
-	.name		= "mpb1_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MPB1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb2_clk = {
-	.name		= "mpb2_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MPB2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb3_clk = {
-	.name		= "mpb3_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MPB3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb4_clk = {
-	.name		= "mpb4_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MPB4,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_US0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_US1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_US2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc0_clk = {
-	.name		= "mci0_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MCI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
-	.name		= "mci1_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MCI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk can_clk = {
-	.name		= "can_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_CAN,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
-	.name		= "twi_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_TWI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
-	.name		= "spi0_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_SPI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
-	.name		= "spi1_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_SPI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
-	.name		= "ssc0_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_SSC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
-	.name		= "ssc1_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_SSC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ac97_clk = {
-	.name		= "ac97_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_AC97C,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb_clk = {
-	.name		= "tcb_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_TCB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
-	.name		= "pwm_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_PWMC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
-	.name		= "pclk",
-	.pmc_mask	= 1 << AT91CAP9_ID_EMAC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk aestdes_clk = {
-	.name		= "aestdes_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_AESTDES,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_clk = {
-	.name		= "adc_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_ADC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
-	.name		= "isi_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_ISI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
-	.name		= "lcdc_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_LCDC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma_clk = {
-	.name		= "dma_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_DMA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
-	.name		= "udphs_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_UDPHS,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
-	.name		= "ohci_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_UHP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioABCD_clk,
-	&mpb0_clk,
-	&mpb1_clk,
-	&mpb2_clk,
-	&mpb3_clk,
-	&mpb4_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&mmc0_clk,
-	&mmc1_clk,
-	&can_clk,
-	&twi_clk,
-	&spi0_clk,
-	&spi1_clk,
-	&ssc0_clk,
-	&ssc1_clk,
-	&ac97_clk,
-	&tcb_clk,
-	&pwm_clk,
-	&macb_clk,
-	&aestdes_clk,
-	&adc_clk,
-	&isi_clk,
-	&lcdc_clk,
-	&dma_clk,
-	&udphs_clk,
-	&ohci_clk,
-	// irq0 .. irq1
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
-	/* One additional fake clock for macb_hclk */
-	CLKDEV_CON_ID("hclk", &macb_clk),
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-	/* fake hclk clock */
-	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
-	CLKDEV_CON_ID("pioA", &pioABCD_clk),
-	CLKDEV_CON_ID("pioB", &pioABCD_clk),
-	CLKDEV_CON_ID("pioC", &pioABCD_clk),
-	CLKDEV_CON_ID("pioD", &pioABCD_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-static struct clk pck2 = {
-	.name		= "pck2",
-	.pmc_mask	= AT91_PMC_PCK2,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 2,
-};
-static struct clk pck3 = {
-	.name		= "pck3",
-	.pmc_mask	= AT91_PMC_PCK3,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 3,
-};
-
-static void __init at91cap9_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clkdev_add_table(periph_clocks_lookups,
-			 ARRAY_SIZE(periph_clocks_lookups));
-	clkdev_add_table(usart_clocks_lookups,
-			 ARRAY_SIZE(usart_clocks_lookups));
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-	clk_register(&pck2);
-	clk_register(&pck3);
-}
-
-static struct clk_lookup console_clock_lookup;
-
-void __init at91cap9_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
-/* --------------------------------------------------------------------
- *  GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
-	{
-		.id		= AT91CAP9_ID_PIOABCD,
-		.regbase	= AT91CAP9_BASE_PIOA,
-	}, {
-		.id		= AT91CAP9_ID_PIOABCD,
-		.regbase	= AT91CAP9_BASE_PIOB,
-	}, {
-		.id		= AT91CAP9_ID_PIOABCD,
-		.regbase	= AT91CAP9_BASE_PIOC,
-	}, {
-		.id		= AT91CAP9_ID_PIOABCD,
-		.regbase	= AT91CAP9_BASE_PIOD,
-	}
-};
-
-static void at91cap9_idle(void)
-{
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-	cpu_do_idle();
-}
-
-/* --------------------------------------------------------------------
- *  AT91CAP9 processor initialization
- * -------------------------------------------------------------------- */
-
-static void __init at91cap9_map_io(void)
-{
-	at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE);
-}
-
-static void __init at91cap9_ioremap_registers(void)
-{
-	at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC);
-	at91_ioremap_rstc(AT91CAP9_BASE_RSTC);
-	at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT);
-	at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC);
-}
-
-static void __init at91cap9_initialize(void)
-{
-	arm_pm_idle = at91cap9_idle;
-	arm_pm_restart = at91sam9g45_restart;
-	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
-
-	/* Register GPIO subsystem */
-	at91_gpio_init(at91cap9_gpio, 4);
-
-	/* Remember the silicon revision */
-	if (cpu_is_at91cap9_revB())
-		system_rev = 0xB;
-	else if (cpu_is_at91cap9_revC())
-		system_rev = 0xC;
-}
-
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller (FIQ) */
-	7,	/* System Peripherals */
-	1,	/* Parallel IO Controller A, B, C and D */
-	0,	/* MP Block Peripheral 0 */
-	0,	/* MP Block Peripheral 1 */
-	0,	/* MP Block Peripheral 2 */
-	0,	/* MP Block Peripheral 3 */
-	0,	/* MP Block Peripheral 4 */
-	5,	/* USART 0 */
-	5,	/* USART 1 */
-	5,	/* USART 2 */
-	0,	/* Multimedia Card Interface 0 */
-	0,	/* Multimedia Card Interface 1 */
-	3,	/* CAN */
-	6,	/* Two-Wire Interface */
-	5,	/* Serial Peripheral Interface 0 */
-	5,	/* Serial Peripheral Interface 1 */
-	4,	/* Serial Synchronous Controller 0 */
-	4,	/* Serial Synchronous Controller 1 */
-	5,	/* AC97 Controller */
-	0,	/* Timer Counter 0, 1 and 2 */
-	0,	/* Pulse Width Modulation Controller */
-	3,	/* Ethernet */
-	0,	/* Advanced Encryption Standard, Triple DES*/
-	0,	/* Analog-to-Digital Converter */
-	0,	/* Image Sensor Interface */
-	3,	/* LCD Controller */
-	0,	/* DMA Controller */
-	2,	/* USB Device Port */
-	2,	/* USB Host port */
-	0,	/* Advanced Interrupt Controller (IRQ0) */
-	0,	/* Advanced Interrupt Controller (IRQ1) */
-};
-
-struct at91_init_soc __initdata at91cap9_soc = {
-	.map_io = at91cap9_map_io,
-	.default_irq_priority = at91cap9_default_irq_priority,
-	.ioremap_registers = at91cap9_ioremap_registers,
-	.register_clocks = at91cap9_register_clocks,
-	.init = at91cap9_initialize,
-};
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
deleted file mode 100644
index d298fb7cb210..000000000000
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ /dev/null
@@ -1,1273 +0,0 @@
-/*
- * arch/arm/mach-at91/at91cap9_devices.c
- *
- *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <mach/board.h>
-#include <mach/cpu.h>
-#include <mach/at91cap9.h>
-#include <mach/at91cap9_matrix.h>
-#include <mach/at91sam9_smc.h>
-
-#include "generic.h"
-
-
-/* --------------------------------------------------------------------
- *  USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_UHP_BASE,
-		.end	= AT91CAP9_UHP_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_UHP,
-		.end	= AT91CAP9_ID_UHP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_usbh_device = {
-	.name		= "at91_ohci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ohci_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &usbh_data,
-	},
-	.resource	= usbh_resources,
-	.num_resources	= ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
-	int i;
-
-	if (!data)
-		return;
-
-	if (cpu_is_at91cap9_revB())
-		irq_set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
-
-	/* Enable VBus control for UHP ports */
-	for (i = 0; i < data->ports; i++) {
-		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i], 0);
-	}
-
-	/* Enable overcurrent notification */
-	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
-			at91_set_gpio_input(data->overcurrent_pin[i], 1);
-	}
-
-	usbh_data = *data;
-	platform_device_register(&at91_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB HS Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
-
-static struct resource usba_udc_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_UDPHS_FIFO,
-		.end	= AT91CAP9_UDPHS_FIFO + SZ_512K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_BASE_UDPHS,
-		.end	= AT91CAP9_BASE_UDPHS + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= AT91CAP9_ID_UDPHS,
-		.end	= AT91CAP9_ID_UDPHS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
-	[idx] = {						\
-		.name		= nam,				\
-		.index		= idx,				\
-		.fifo_size	= maxpkt,			\
-		.nr_banks	= maxbk,			\
-		.can_dma	= dma,				\
-		.can_isoc	= isoc,				\
-	}
-
-static struct usba_ep_data usba_udc_ep[] = {
-	EP("ep0", 0,   64, 1, 0, 0),
-	EP("ep1", 1, 1024, 3, 1, 1),
-	EP("ep2", 2, 1024, 3, 1, 1),
-	EP("ep3", 3, 1024, 2, 1, 1),
-	EP("ep4", 4, 1024, 2, 1, 1),
-	EP("ep5", 5, 1024, 2, 1, 0),
-	EP("ep6", 6, 1024, 2, 1, 0),
-	EP("ep7", 7, 1024, 2, 0, 0),
-};
-
-#undef EP
-
-/*
- * pdata doesn't have room for any endpoints, so we need to
- * append room for the ones we need right after it.
- */
-static struct {
-	struct usba_platform_data pdata;
-	struct usba_ep_data ep[8];
-} usba_udc_data;
-
-static struct platform_device at91_usba_udc_device = {
-	.name		= "atmel_usba_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &usba_udc_data.pdata,
-	},
-	.resource	= usba_udc_resources,
-	.num_resources	= ARRAY_SIZE(usba_udc_resources),
-};
-
-void __init at91_add_device_usba(struct usba_platform_data *data)
-{
-	if (cpu_is_at91cap9_revB()) {
-		irq_set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
-		at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
-						  AT91_MATRIX_UDPHS_BYPASS_LOCK);
-	}
-	else
-		at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS);
-
-	/*
-	 * Invalid pins are 0 on AT91, but the usba driver is shared
-	 * with AVR32, which use negative values instead. Once/if
-	 * gpio_is_valid() is ported to AT91, revisit this code.
-	 */
-	usba_udc_data.pdata.vbus_pin = -EINVAL;
-	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
-
-	if (data && gpio_is_valid(data->vbus_pin)) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-		usba_udc_data.pdata.vbus_pin = data->vbus_pin;
-	}
-
-	/* Pullup pin is handled internally by USB device peripheral */
-
-	platform_device_register(&at91_usba_udc_device);
-}
-#else
-void __init at91_add_device_usba(struct usba_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_EMAC,
-		.end	= AT91CAP9_BASE_EMAC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_EMAC,
-		.end	= AT91CAP9_ID_EMAC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_eth_device = {
-	.name		= "macb",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &eth_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &eth_data,
-	},
-	.resource	= eth_resources,
-	.num_resources	= ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
-	if (!data)
-		return;
-
-	if (gpio_is_valid(data->phy_irq_pin)) {
-		at91_set_gpio_input(data->phy_irq_pin, 0);
-		at91_set_deglitch(data->phy_irq_pin, 1);
-	}
-
-	/* Pins used for MII and RMII */
-	at91_set_A_periph(AT91_PIN_PB21, 0);	/* ETXCK_EREFCK */
-	at91_set_A_periph(AT91_PIN_PB22, 0);	/* ERXDV */
-	at91_set_A_periph(AT91_PIN_PB25, 0);	/* ERX0 */
-	at91_set_A_periph(AT91_PIN_PB26, 0);	/* ERX1 */
-	at91_set_A_periph(AT91_PIN_PB27, 0);	/* ERXER */
-	at91_set_A_periph(AT91_PIN_PB28, 0);	/* ETXEN */
-	at91_set_A_periph(AT91_PIN_PB23, 0);	/* ETX0 */
-	at91_set_A_periph(AT91_PIN_PB24, 0);	/* ETX1 */
-	at91_set_A_periph(AT91_PIN_PB30, 0);	/* EMDIO */
-	at91_set_A_periph(AT91_PIN_PB29, 0);	/* EMDC */
-
-	if (!data->is_rmii) {
-		at91_set_B_periph(AT91_PIN_PC25, 0);	/* ECRS */
-		at91_set_B_periph(AT91_PIN_PC26, 0);	/* ECOL */
-		at91_set_B_periph(AT91_PIN_PC22, 0);	/* ERX2 */
-		at91_set_B_periph(AT91_PIN_PC23, 0);	/* ERX3 */
-		at91_set_B_periph(AT91_PIN_PC27, 0);	/* ERXCK */
-		at91_set_B_periph(AT91_PIN_PC20, 0);	/* ETX2 */
-		at91_set_B_periph(AT91_PIN_PC21, 0);	/* ETX3 */
-		at91_set_B_periph(AT91_PIN_PC24, 0);	/* ETXER */
-	}
-
-	eth_data = *data;
-	platform_device_register(&at91cap9_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFI