diff options
author | Bruce Allan <bruce.w.allan@intel.com> | 2011-12-16 00:46:33 +0000 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2012-01-26 18:25:37 -0800 |
commit | 90b82984a4ce689d7b1d7132e50bc61ac6f8b74f (patch) | |
tree | 2a17ff1a58f5bedd73790b4585fb3d2368bdd69c | |
parent | 79d4e9087a6ecd6bf2103bf378bf8e0d79278b5a (diff) |
e1000e: update workaround for 82579 intermittently disabled during S0->Sx
The workaround which toggles the LANPHYPC (LAN PHY Power Control) value bit
to force the MAC-Phy interconnect into PCIe mode from SMBus mode during
driver load and resume should always be done except if PHY resets are
blocked by the Manageability Engine (ME). Previously, the toggle was done
only if PHY resets are blocked and the ME was disabled.
The rest of the patch is just indentation changes as a consequence of the
updated workaround.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 103 |
1 files changed, 49 insertions, 54 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index e446e0582503..50a61fcf75cc 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -306,7 +306,6 @@ static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw) static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - u32 fwsm; s32 ret_val = 0; phy->addr = 1; @@ -325,14 +324,14 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - /* - * The MAC-PHY interconnect may still be in SMBus mode - * after Sx->S0. If the manageability engine (ME) is - * disabled, then toggle the LANPHYPC Value bit to force - * the interconnect to PCIe mode. - */ - fwsm = er32(FWSM); - if (!(fwsm & E1000_ICH_FWSM_FW_VALID) && !e1000_check_reset_block(hw)) { + if (!e1000_check_reset_block(hw)) { + u32 fwsm = er32(FWSM); + + /* + * The MAC-PHY interconnect may still be in SMBus mode after + * Sx->S0. If resetting the PHY is not blocked, toggle the + * LANPHYPC Value bit to force the interconnect to PCIe mode. + */ e1000_toggle_lanphypc_value_ich8lan(hw); msleep(50); @@ -340,25 +339,26 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) * Gate automatic PHY configuration by hardware on * non-managed 82579 */ - if (hw->mac.type == e1000_pch2lan) + if ((hw->mac.type == e1000_pch2lan) && + !(fwsm & E1000_ICH_FWSM_FW_VALID)) e1000_gate_hw_phy_config_ich8lan(hw, true); - } - /* - * Reset the PHY before any access to it. Doing so, ensures that - * the PHY is in a known good state before we read/write PHY registers. - * The generic reset is sufficient here, because we haven't determined - * the PHY type yet. - */ - ret_val = e1000e_phy_hw_reset_generic(hw); - if (ret_val) - goto out; + /* + * Reset the PHY before any access to it. Doing so, ensures + * that the PHY is in a known good state before we read/write + * PHY registers. The generic reset is sufficient here, + * because we haven't determined the PHY type yet. + */ + ret_val = e1000e_phy_hw_reset_generic(hw); + if (ret_val) + goto out; - /* Ungate automatic PHY configuration on non-managed 82579 */ - if ((hw->mac.type == e1000_pch2lan) && - !(fwsm & E1000_ICH_FWSM_FW_VALID)) { - usleep_range(10000, 20000); - e1000_gate_hw_phy_config_ich8lan(hw, false); + /* Ungate automatic PHY configuration on non-managed 82579 */ + if ((hw->mac.type == e1000_pch2lan) && + !(fwsm & E1000_ICH_FWSM_FW_VALID)) { + usleep_range(10000, 20000); + e1000_gate_hw_phy_config_ich8lan(hw, false); + } } phy->id = e1000_phy_unknown; @@ -3736,42 +3736,37 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) **/ void e1000_resume_workarounds_pchlan(struct e1000_hw *hw) { - u32 fwsm; + u16 phy_id1, phy_id2; + s32 ret_val; - if (hw->mac.type != e1000_pch2lan) + if ((hw->mac.type != e1000_pch2lan) || e1000_check_reset_block(hw)) return; - fwsm = er32(FWSM); - if (!(fwsm & E1000_ICH_FWSM_FW_VALID) || !e1000_check_reset_block(hw)) { - u16 phy_id1, phy_id2; - s32 ret_val; - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) { - e_dbg("Failed to acquire PHY semaphore in resume\n"); - return; - } + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) { + e_dbg("Failed to acquire PHY semaphore in resume\n"); + return; + } - /* Test access to the PHY registers by reading the ID regs */ - ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_id1); - if (ret_val) - goto release; - ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_id2); - if (ret_val) - goto release; + /* Test access to the PHY registers by reading the ID regs */ + ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_id1); + if (ret_val) + goto release; + ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_id2); + if (ret_val) + goto release; - if (hw->phy.id == ((u32)(phy_id1 << 16) | - (u32)(phy_id2 & PHY_REVISION_MASK))) - goto release; + if (hw->phy.id == ((u32)(phy_id1 << 16) | + (u32)(phy_id2 & PHY_REVISION_MASK))) + goto release; - e1000_toggle_lanphypc_value_ich8lan(hw); + e1000_toggle_lanphypc_value_ich8lan(hw); - hw->phy.ops.release(hw); - msleep(50); - e1000_phy_hw_reset(hw); - msleep(50); - return; - } + hw->phy.ops.release(hw); + msleep(50); + e1000_phy_hw_reset(hw); + msleep(50); + return; release: hw->phy.ops.release(hw); |