Merge tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6

Pull fbdev updates from Florian Tobias Schandinat:
 - driver for AUO-K1900 and AUO-K1901 epaper controller
 - large updates for OMAP (e.g. decouple HDMI audio and video)
 - some updates for Exynos and SH Mobile
 - various other small fixes and cleanups

* tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6: (130 commits)
  video: bfin_adv7393fb: Fix cleanup code
  video: exynos_dp: reduce delay time when configuring video setting
  video: exynos_dp: move sw reset prioir to enabling sw defined function
  video: exynos_dp: use devm_ functions
  fb: handle NULL pointers in framebuffer release
  OMAPDSS: HDMI: OMAP4: Update IRQ flags for the HPD IRQ request
  OMAPDSS: Apply VENC timings even if panel is disabled
  OMAPDSS: VENC/DISPC: Delay dividing Y resolution for managers connected to VENC
  OMAPDSS: DISPC: Support rotation through TILER
  OMAPDSS: VRFB: remove compiler warnings when CONFIG_BUG=n
  OMAPFB: remove compiler warnings when CONFIG_BUG=n
  OMAPDSS: remove compiler warnings when CONFIG_BUG=n
  OMAPDSS: DISPC: fix usage of dispc_ovl_set_accu_uv
  OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays
  OMAPDSS: DSI: Support command mode interleaving during video mode blanking periods
  OMAPDSS: DISPC: Update Accumulator configuration for chroma plane
  drivers/video: fsl-diu-fb: don't initialize the THRESHOLDS registers
  video: exynos mipi dsi: support reverse panel type
  video: exynos mipi dsi: Properly interpret the interrupt source flags
  video: exynos mipi dsi: Avoid races in probe()
  ...

94 files changed, 5467 insertions, 2155 deletions

diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS
index 888ae7b83ae4..a564ceea9e98 100644
--- a/Documentation/arm/OMAP/DSS
+++ b/Documentation/arm/OMAP/DSS
@@ -47,6 +47,51 @@ flexible way to enable non-common multi-display configuration. In addition to
 modelling the hardware overlays, omapdss supports virtual overlays and overlay
 managers. These can be used when updating a display with CPU or system DMA.
 
+omapdss driver support for audio
+--------------------------------
+There exist several display technologies and standards that support audio as
+well. Hence, it is relevant to update the DSS device driver to provide an audio
+interface that may be used by an audio driver or any other driver interested in
+the functionality.
+
+The audio_enable function is intended to prepare the relevant
+IP for playback (e.g., enabling an audio FIFO, taking in/out of reset
+some IP, enabling companion chips, etc). It is intended to be called before
+audio_start. The audio_disable function performs the reverse operation and is
+intended to be called after audio_stop.
+
+While a given DSS device driver may support audio, it is possible that for
+certain configurations audio is not supported (e.g., an HDMI display using a
+VESA video timing). The audio_supported function is intended to query whether
+the current configuration of the display supports audio.
+
+The audio_config function is intended to configure all the relevant audio
+parameters of the display. In order to make the function independent of any
+specific DSS device driver, a struct omap_dss_audio is defined. Its purpose
+is to contain all the required parameters for audio configuration. At the
+moment, such structure contains pointers to IEC-60958 channel status word
+and CEA-861 audio infoframe structures. This should be enough to support
+HDMI and DisplayPort, as both are based on CEA-861 and IEC-60958.
+
+The audio_enable/disable, audio_config and audio_supported functions could be
+implemented as functions that may sleep. Hence, they should not be called
+while holding a spinlock or a readlock.
+
+The audio_start/audio_stop function is intended to effectively start/stop audio
+playback after the configuration has taken place. These functions are designed
+to be used in an atomic context. Hence, audio_start should return quickly and be
+called only after all the needed resources for audio playback (audio FIFOs,
+DMA channels, companion chips, etc) have been enabled to begin data transfers.
+audio_stop is designed to only stop the audio transfers. The resources used
+for playback are released using audio_disable.
+
+The enum omap_dss_audio_state may be used to help the implementations of
+the interface to keep track of the audio state. The initial state is _DISABLED;
+then, the state transitions to _CONFIGURED, and then, when it is ready to
+play audio, to _ENABLED. The state _PLAYING is used when the audio is being
+rendered.
+
+
 Panel and controller drivers
 ----------------------------
 
@@ -156,6 +201,7 @@ timings		Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw)
 		"pal" and "ntsc"
 panel_name
 tear_elim	Tearing elimination 0=off, 1=on
+output_type	Output type (video encoder only): "composite" or "svideo"
 
 There are also some debugfs files at <debugfs>/omapdss/ which show information
 about clocks and registers.
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 972983e392bc..656f8fc9addd 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -237,25 +237,29 @@ static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
 #else
 /* Frame Buffer */
 static struct s3c_fb_pd_win nuri_fb_win0 = {
-	.win_mode = {
-		.left_margin	= 64,
-		.right_margin	= 16,
-		.upper_margin	= 64,
-		.lower_margin	= 1,
-		.hsync_len	= 48,
-		.vsync_len	= 3,
-		.xres		= 1024,
-		.yres		= 600,
-		.refresh	= 60,
-	},
 	.max_bpp	= 24,
 	.default_bpp	= 16,
+	.xres		= 1024,
+	.yres		= 600,
 	.virtual_x	= 1024,
 	.virtual_y	= 2 * 600,
 };
 
+static struct fb_videomode nuri_lcd_timing = {
+	.left_margin	= 64,
+	.right_margin	= 16,
+	.upper_margin	= 64,
+	.lower_margin	= 1,
+	.hsync_len	= 48,
+	.vsync_len	= 3,
+	.xres		= 1024,
+	.yres		= 600,
+	.refresh	= 60,
+};
+
 static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
 	.win[0]		= &nuri_fb_win0,
+	.vtiming	= &nuri_lcd_timing,
 	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
 			  VIDCON0_CLKSEL_LCD,
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index a7f7fd567dde..f5572be9d7bf 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -604,24 +604,28 @@ static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
 };
 #else
 static struct s3c_fb_pd_win origen_fb_win0 = {
-	.win_mode = {
-		.left_margin	= 64,
-		.right_margin	= 16,
-		.upper_margin	= 64,
-		.lower_margin	= 16,
-		.hsync_len	= 48,
-		.vsync_len	= 3,
-		.xres		= 1024,
-		.yres		= 600,
-	},
+	.xres			= 1024,
+	.yres			= 600,
 	.max_bpp		= 32,
 	.default_bpp		= 24,
 	.virtual_x		= 1024,
 	.virtual_y		= 2 * 600,
 };
 
+static struct fb_videomode origen_lcd_timing = {
+	.left_margin	= 64,
+	.right_margin	= 16,
+	.upper_margin	= 64,
+	.lower_margin	= 16,
+	.hsync_len	= 48,
+	.vsync_len	= 3,
+	.xres		= 1024,
+	.yres		= 600,
+};
+
 static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
 	.win[0]		= &origen_fb_win0,
+	.vtiming	= &origen_lcd_timing,
 	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
 				VIDCON1_INV_VCLK,
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 70df1a0c2118..262e9e446a96 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -178,22 +178,26 @@ static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
 };
 #else
 static struct s3c_fb_pd_win smdkv310_fb_win0 = {
-	.win_mode = {
-		.left_margin	= 13,
-		.right_margin	= 8,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp		= 32,
-	.default_bpp		= 24,
+	.max_bpp	= 32,
+	.default_bpp	= 24,
+	.xres		= 800,
+	.yres		= 480,
+};
+
+static struct fb_videomode smdkv310_lcd_timing = {
+	.left_margin	= 13,
+	.right_margin	= 8,
+	.upper_margin	= 7,
+	.lower_margin	= 5,
+	.hsync_len	= 3,
+	.vsync_len	= 1,
+	.xres		= 800,
+	.yres		= 480,
 };
 
 static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
 	.win[0]		= &smdkv310_fb_win0,
+	.vtiming	= &smdkv310_lcd_timing,
 	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 083b44de9c10..cd92fa86ba41 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -843,25 +843,29 @@ static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
 #else
 /* Frame Buffer */
 static struct s3c_fb_pd_win universal_fb_win0 = {
-	.win_mode = {
-		.left_margin	= 16,
-		.right_margin	= 16,
-		.upper_margin	= 2,
-		.lower_margin	= 28,
-		.hsync_len	= 2,
-		.vsync_len	= 1,
-		.xres		= 480,
-		.yres		= 800,
-		.refresh	= 55,
-	},
 	.max_bpp	= 32,
 	.default_bpp	= 16,
+	.xres		= 480,
+	.yres		= 800,
 	.virtual_x	= 480,
 	.virtual_y	= 2 * 800,
 };
 
+static struct fb_videomode universal_lcd_timing = {
+	.left_margin	= 16,
+	.right_margin	= 16,
+	.upper_margin	= 2,
+	.lower_margin	= 28,
+	.hsync_len	= 2,
+	.vsync_len	= 1,
+	.xres		= 480,
+	.yres		= 800,
+	.refresh	= 55,
+};
+
 static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
 	.win[0]		= &universal_fb_win0,
+	.vtiming	= &universal_lcd_timing,
 	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
 			  VIDCON0_CLKSEL_LCD,
 	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index db5a88a36c63..54d49ddb9b81 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -180,16 +180,133 @@ static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
 		omap4_dsi_mux_pads(dsi_id, 0);
 }
 
+static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput)
+{
+	return omap_pm_set_min_bus_tput(dev, OCP_INITIATOR_AGENT, tput);
+}
+
+static struct platform_device *create_dss_pdev(const char *pdev_name,
+		int pdev_id, const char *oh_name, void *pdata, int pdata_len,
+		struct platform_device *parent)
+{
+	struct platform_device *pdev;
+	struct omap_device *od;
+	struct omap_hwmod *ohs[1];
+	struct omap_hwmod *oh;
+	int r;
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("Could not look up %s\n", oh_name);
+		r = -ENODEV;
+		goto err;
+	}
+
+	pdev = platform_device_alloc(pdev_name, pdev_id);
+	if (!pdev) {
+		pr_err("Could not create pdev for %s\n", pdev_name);
+		r = -ENOMEM;
+		goto err;
+	}
+
+	if (parent != NULL)
+		pdev->dev.parent = &parent->dev;
+
+	if (pdev->id != -1)
+		dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
+	else
+		dev_set_name(&pdev->dev, "%s", pdev->name);
+
+	ohs[0] = oh;
+	od = omap_device_alloc(pdev, ohs, 1, NULL, 0);
+	if (!od) {
+		pr_err("Could not alloc omap_device for %s\n", pdev_name);
+		r = -ENOMEM;
+		goto err;
+	}
+
+	r = platform_device_add_data(pdev, pdata, pdata_len);
+	if (r) {
+		pr_err("Could not set pdata for %s\n", pdev_name);
+		goto err;
+	}
+
+	r = omap_device_register(pdev);
+	if (r) {
+		pr_err("Could not register omap_device for %s\n", pdev_name);
+		goto err;
+	}
+
+	return pdev;
+
+err:
+	return ERR_PTR(r);
+}
+
+static struct platform_device *create_simple_dss_pdev(const char *pdev_name,
+		int pdev_id, void *pdata, int pdata_len,
+		struct platform_device *parent)
+{
+	struct platform_device *pdev;
+	int r;
+
+	pdev = platform_device_alloc(pdev_name, pdev_id);
+	if (!pdev) {
+		pr_err("Could not create pdev for %s\n", pdev_name);
+		r = -ENOMEM;
+		goto err;
+	}
+
+	if (parent != NULL)
+		pdev->dev.parent = &parent->dev;
+
+	if (pdev->id != -1)
+		d