Merge branch 'clk-qcom-sdm845' into clk-next

* clk-qcom-sdm845:
  clk: qcom: Export clk_fabia_pll_configure()
  clk: qcom: Add video clock controller driver for SDM845
  dt-bindings: clock: Introduce QCOM Video clock bindings
  clk: qcom: Add Global Clock controller (GCC) driver for SDM845
  clk: qcom: Add DT bindings for SDM845 gcc clock controller
  clk: qcom: Configure the RCGs to a safe source as needed
  clk: qcom: Add support for BRANCH_HALT_SKIP flag for branch clocks
  clk: qcom: Simplify gdsc status checking logic
  clk: qcom: gdsc: Add support to poll CFG register to check GDSC state
  clk: qcom: gdsc: Add support to poll for higher timeout value
  clk: qcom: gdsc: Add support to reset AON and block reset logic
  clk: qcom: Add support for controlling Fabia PLL
  clk: qcom: Clear hardware clock control bit of RCG

Also fixup the Kconfig mess where SDM845 GCC has msm8998 in the
description and also the video Kconfig says things slightly differently
from the GCC one so just make it the same.

16 files changed, 4689 insertions, 62 deletions

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index d1fb8b213dde..664ea1fd6c76 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -19,6 +19,7 @@ Required properties :
 			"qcom,gcc-msm8996"
 			"qcom,gcc-msm8998"
 			"qcom,gcc-mdm9615"
+			"qcom,gcc-sdm845"
 
 - reg : shall contain base register location and length
 - #clock-cells : shall contain 1
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.txt b/Documentation/devicetree/bindings/clock/qcom,videocc.txt
new file mode 100644
index 000000000000..e7c035afa778
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.txt
@@ -0,0 +1,19 @@
+Qualcomm Video Clock & Reset Controller Binding
+-----------------------------------------------
+
+Required properties :
+- compatible : shall contain "qcom,sdm845-videocc"
+- reg : shall contain base register location and length
+- #clock-cells : from common clock binding, shall contain 1.
+- #power-domain-cells : from generic power domain binding, shall contain 1.
+
+Optional properties :
+- #reset-cells : from common reset binding, shall contain 1.
+
+Example:
+	videocc: clock-controller@ab00000 {
+		compatible = "qcom,sdm845-videocc";
+		reg = <0xab00000 0x10000>;
+		#clock-cells = <1>;
+		#power-domain-cells = <1>;
+	};
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index e42e1afb0c51..9c3480dcc38a 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -226,6 +226,25 @@ config MSM_GCC_8998
 	  Say Y if you want to use peripheral devices such as UART, SPI,
 	  i2c, USB, UFS, SD/eMMC, PCIe, etc.
 
+config SDM_GCC_845
+	tristate "SDM845 Global Clock Controller"
+	select QCOM_GDSC
+	depends on COMMON_CLK_QCOM
+	help
+	  Support for the global clock controller on SDM845 devices.
+	  Say Y if you want to use peripheral devices such as UART, SPI,
+	  i2C, USB, UFS, SDDC, PCIe, etc.
+
+config SDM_VIDEOCC_845
+	tristate "SDM845 Video Clock Controller"
+	depends on COMMON_CLK_QCOM
+	select SDM_GCC_845
+	select QCOM_GDSC
+	help
+	  Support for the video clock controller on SDM845 devices.
+	  Say Y if you want to support video devices and functionality such as
+	  video encode and decode.
+
 config SPMI_PMIC_CLKDIV
 	tristate "SPMI PMIC clkdiv Support"
 	depends on (COMMON_CLK_QCOM && SPMI) || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 7c09ab1a640c..762c01137c2f 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -38,4 +38,6 @@ obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o
 obj-$(CONFIG_QCOM_CLK_APCS_MSM8916) += apcs-msm8916.o
 obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
 obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
+obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o
+obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 6d04cd96482a..3c49a60072f1 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -58,6 +58,8 @@
 #define PLL_TEST_CTL(p)		((p)->offset + (p)->regs[PLL_OFF_TEST_CTL])
 #define PLL_TEST_CTL_U(p)	((p)->offset + (p)->regs[PLL_OFF_TEST_CTL_U])
 #define PLL_STATUS(p)		((p)->offset + (p)->regs[PLL_OFF_STATUS])
+#define PLL_OPMODE(p)		((p)->offset + (p)->regs[PLL_OFF_OPMODE])
+#define PLL_FRAC(p)		((p)->offset + (p)->regs[PLL_OFF_FRAC])
 
 const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
 	[CLK_ALPHA_PLL_TYPE_DEFAULT] =  {
@@ -90,6 +92,18 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
 		[PLL_OFF_TEST_CTL] = 0x1c,
 		[PLL_OFF_STATUS] = 0x24,
 	},
+	[CLK_ALPHA_PLL_TYPE_FABIA] =  {
+		[PLL_OFF_L_VAL] = 0x04,
+		[PLL_OFF_USER_CTL] = 0x0c,
+		[PLL_OFF_USER_CTL_U] = 0x10,
+		[PLL_OFF_CONFIG_CTL] = 0x14,
+		[PLL_OFF_CONFIG_CTL_U] = 0x18,
+		[PLL_OFF_TEST_CTL] = 0x1c,
+		[PLL_OFF_TEST_CTL_U] = 0x20,
+		[PLL_OFF_STATUS] = 0x24,
+		[PLL_OFF_OPMODE] = 0x2c,
+		[PLL_OFF_FRAC] = 0x38,
+	},
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 
@@ -108,6 +122,12 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 #define PLL_HUAYRA_N_MASK		0xff
 #define PLL_HUAYRA_ALPHA_WIDTH		16
 
+#define FABIA_OPMODE_STANDBY	0x0
+#define FABIA_OPMODE_RUN	0x1
+
+#define FABIA_PLL_OUT_MASK	0x7
+#define FABIA_PLL_RATE_MARGIN	500
+
 #define pll_alpha_width(p)					\
 		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
 				 ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
@@ -441,16 +461,12 @@ clk_alpha_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	return alpha_pll_calc_rate(prate, l, a, alpha_width);
 }
 
-static int clk_alpha_pll_update_latch(struct clk_alpha_pll *pll,
-				      int (*is_enabled)(struct clk_hw *))
+
+static int __clk_alpha_pll_update_latch(struct clk_alpha_pll *pll)
 {
 	int ret;
 	u32 mode;
 
-	if (!is_enabled(&pll->clkr.hw) ||
-	    !(pll->flags & SUPPORTS_DYNAMIC_UPDATE))
-		return 0;
-
 	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &mode);
 
 	/* Latch the input to the PLL */
@@ -489,6 +505,16 @@ static int clk_alpha_pll_update_latch(struct clk_alpha_pll *pll,
 	return 0;
 }
 
+static int clk_alpha_pll_update_latch(struct clk_alpha_pll *pll,
+				      int (*is_enabled)(struct clk_hw *))
+{
+	if (!is_enabled(&pll->clkr.hw) ||
+	    !(pll->flags & SUPPORTS_DYNAMIC_UPDATE))
+		return 0;
+
+	return __clk_alpha_pll_update_latch(pll);
+}
+
 static int __clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 				    unsigned long prate,
 				    int (*is_enabled)(struct clk_hw *))
@@ -832,3 +858,265 @@ const struct clk_ops clk_alpha_pll_postdiv_ro_ops = {
 	.recalc_rate = clk_alpha_pll_postdiv_recalc_rate,
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_ro_ops);
+
+void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+			     const struct alpha_pll_config *config)
+{
+	u32 val, mask;
+
+	if (config->l)
+		regmap_write(regmap, PLL_L_VAL(pll), config->l);
+
+	if (config->alpha)
+		regmap_write(regmap, PLL_FRAC(pll), config->alpha);
+
+	if (config->config_ctl_val)
+		regmap_write(regmap, PLL_CONFIG_CTL(pll),
+						config->config_ctl_val);
+
+	if (config->post_div_mask) {
+		mask = config->post_div_mask;
+		val = config->post_div_val;
+		regmap_update_bits(regmap, PLL_USER_CTL(pll), mask, val);
+	}
+
+	regmap_update_bits(regmap, PLL_MODE(pll), PLL_UPDATE_BYPASS,
+							PLL_UPDATE_BYPASS);
+
+	regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
+}
+EXPORT_SYMBOL_GPL(clk_fabia_pll_configure);
+
+static int alpha_pll_fabia_enable(struct clk_hw *hw)
+{
+	int ret;
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 val, opmode_val;
+	struct regmap *regmap = pll->clkr.regmap;
+
+	ret = regmap_read(regmap, PLL_MODE(pll), &val);
+	if (ret)
+		return ret;
+
+	/* If in FSM mode, just vote for it */
+	if (val & PLL_VOTE_FSM_ENA) {
+		ret = clk_enable_regmap(hw);
+		if (ret)
+			return ret;
+		return wait_for_pll_enable_active(pll);
+	}
+
+	ret = regmap_read(regmap, PLL_OPMODE(pll), &opmode_val);
+	if (ret)
+		return ret;
+
+	/* Skip If PLL is already running */
+	if ((opmode_val & FABIA_OPMODE_RUN) && (val & PLL_OUTCTRL))
+		return 0;
+
+	ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(regmap, PLL_OPMODE(pll), FABIA_OPMODE_STANDBY);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N,
+				 PLL_RESET_N);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(regmap, PLL_OPMODE(pll), FABIA_OPMODE_RUN);
+	if (ret)
+		return ret;
+
+	ret = wait_for_pll_enable_lock(pll);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(regmap, PLL_USER_CTL(pll),
+				 FABIA_PLL_OUT_MASK, FABIA_PLL_OUT_MASK);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL,
+				 PLL_OUTCTRL);
+}
+
+static void alpha_pll_fabia_disable(struct clk_hw *hw)
+{
+	int ret;
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 val;
+	struct regmap *regmap = pll->clkr.regmap;
+
+	ret = regmap_read(regmap, PLL_MODE(pll), &val);
+	if (ret)
+		return;
+
+	/* If in FSM mode, just unvote it */
+	if (val & PLL_FSM_ENA) {
+		clk_disable_regmap(hw);
+		return;
+	}
+
+	ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
+	if (ret)
+		return;
+
+	/* Disable main outputs */
+	ret = regmap_update_bits(regmap, PLL_USER_CTL(pll), FABIA_PLL_OUT_MASK,
+				 0);
+	if (ret)
+		return;
+
+	/* Place the PLL in STANDBY */
+	regmap_write(regmap, PLL_OPMODE(pll), FABIA_OPMODE_STANDBY);
+}
+
+static unsigned long alpha_pll_fabia_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 l, frac, alpha_width = pll_alpha_width(pll);
+
+	regmap_read(pll->clkr.regmap, PLL_L_VAL(pll), &l);
+	regmap_read(pll->clkr.regmap, PLL_FRAC(pll), &frac);
+
+	return alpha_pll_calc_rate(parent_rate, l, frac, alpha_width);
+}
+
+static int alpha_pll_fabia_set_rate(struct clk_hw *hw, unsigned long rate,
+						unsigned long prate)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 val, l, alpha_width = pll_alpha_width(pll);
+	u64 a;
+	unsigned long rrate;
+	int ret = 0;
+
+	ret = regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
+	if (ret)
+		return ret;
+
+	rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
+
+	/*
+	 * Due to limited number of bits for fractional rate programming, the
+	 * rounded up rate could be marginally higher than the requested rate.
+	 */
+	if (rrate > (rate + FABIA_PLL_RATE_MARGIN) || rrate < rate) {
+		pr_err("Call set rate on the PLL with rounded rates!\n");
+		return -EINVAL;
+	}
+
+	regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
+	regmap_write(pll->clkr.regmap, PLL_FRAC(pll), a);
+
+	return __clk_alpha_pll_update_latch(pll);
+}
+
+const struct clk_ops clk_alpha_pll_fabia_ops = {
+	.enable = alpha_pll_fabia_enable,
+	.disable = alpha_pll_fabia_disable,
+	.is_enabled = clk_alpha_pll_is_enabled,
+	.set_rate = alpha_pll_fabia_set_rate,
+	.recalc_rate = alpha_pll_fabia_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_fabia_ops);
+
+const struct clk_ops clk_alpha_pll_fixed_fabia_ops = {
+	.enable = alpha_pll_fabia_enable,
+	.disable = alpha_pll_fabia_disable,
+	.is_enabled = clk_alpha_pll_is_enabled,
+	.recalc_rate = alpha_pll_fabia_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_fixed_fabia_ops);
+
+static unsigned long clk_alpha_pll_postdiv_fabia_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
+	u32 i, div = 1, val;
+	int ret;
+
+	if (!pll->post_div_table) {
+		pr_err("Missing the post_div_table for the PLL\n");
+		return -EINVAL;
+	}
+
+	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
+	if (ret)
+		return ret;
+
+	val >>= pll->post_div_shift;
+	val &= BIT(pll->width) - 1;
+
+	for (i = 0; i < pll->num_post_div; i++) {
+		if (pll->post_div_table[i].val == val) {
+			div = pll->post_div_table[i].div;
+			break;
+		}
+	}
+
+	return (parent_rate / div);
+}
+
+static long clk_alpha_pll_postdiv_fabia_round_rate(struct clk_hw *hw,
+				unsigned long rate, unsigned long *prate)
+{
+	struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
+
+	if (!pll->post_div_table) {
+		pr_err("Missing the post_div_table for the PLL\n");
+		return -EINVAL;
+	}
+
+	return divider_round_rate(hw, rate, prate, pll->post_div_table,
+				pll->width, CLK_DIVIDER_ROUND_CLOSEST);
+}
+
+static int clk_alpha_pll_postdiv_fabia_set_rate(struct clk_hw *hw,
+				unsigned long rate, unsigned long parent_rate)
+{
+	struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
+	int i, val = 0, div, ret;
+
+	/*
+	 * If the PLL is in FSM mode, then treat set_rate callback as a
+	 * no-operation.
+	 */
+	ret = regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
+	if (ret)
+		return ret;
+
+	if (val & PLL_VOTE_FSM_ENA)
+		return 0;
+
+	if (!pll->post_div_table) {
+		pr_err("Missing the post_div_table for the PLL\n");
+		return -EINVAL;
+	}
+
+	div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
+	for (i = 0; i < pll->num_post_div; i++) {
+		if (pll->post_div_table[i].div == div) {
+			val = pll->post_div_table[i].val;
+			break;
+		}
+	}
+
+	return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
+				(BIT(pll->width) - 1) << pll->post_div_shift,
+				val << pll->post_div_shift);
+}
+
+const struct clk_ops clk_alpha_pll_postdiv_fabia_ops = {
+	.recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
+	.round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
+	.set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_fabia_ops);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 7593e8a56cf2..f981b486c468 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -22,6 +22,7 @@ enum {
 	CLK_ALPHA_PLL_TYPE_DEFAULT,
 	CLK_ALPHA_PLL_TYPE_HUAYRA,
 	CLK_ALPHA_PLL_TYPE_BRAMMO,
+	CLK_ALPHA_PLL_TYPE_FABIA,
 	CLK_ALPHA_PLL_TYPE_MAX,
 };
 
@@ -36,6 +37,8 @@ enum {
 	PLL_OFF_TEST_CTL,
 	PLL_OFF_TEST_CTL_U,
 	PLL_OFF_STATUS,
+	PLL_OFF_OPMODE,
+	PLL_OFF_FRAC,
 	PLL_OFF_MAX_REGS
 };
 
@@ -73,6 +76,10 @@ struct clk_alpha_pll {
  * @offset: base address of registers
  * @regs: alpha pll register map (see @clk_alpha_pll_regs)
  * @width: width of post-divider
+ * @post_div_shift: shift to differentiate between odd & even post-divider
+ * @post_div_table: table with PLL odd and even post-divider settings
+ * @num_post_div: Number of PLL post-divider settings
+ *
  * @clkr: regmap clock handle
  */
 struct clk_alpha_pll_postdiv {
@@ -81,6 +88,9 @@ struct clk_alpha_pll_postdiv {
 	const u8 *regs;
 
 	struct clk_regmap clkr;
+	int post_div_shift;
+	const struct clk_div_table *post_div_table;
+	size_t num_post_div;
 };
 
 struct alpha_pll_config {
@@ -109,7 +119,13 @@ extern const struct clk_ops clk_alpha_pll_postdiv_ops;
 extern const struct clk_ops clk_alpha_pll_huayra_ops;
 extern const struct clk_ops clk_alpha_pll_postdiv_ro_ops;
 
+extern const struct clk_ops clk_alpha_pll_fabia_ops;
+extern const struct clk_ops clk_alpha_pll_fixed_fabia_ops;
+extern const struct clk_ops clk_alpha_pll_postdiv_fabia_ops;
+
 void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 			     const struct alpha_pll_config *config);
+void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+				const struct alpha_pll_config *config);
 
 #endif
diff --git a/drivers/clk/qcom/clk-branch.c b/drivers/clk/qcom/clk-branch.c
index 26f7af315066..c58c5538b1b6 100644
--- a/drivers/clk/qcom/clk-branch.c
+++ b/drivers/clk/qcom/clk-branch.c
@@ -77,8 +77,11 @@ static int clk_branch_wait(const struct clk_branch *br, bool enabling,
 	bool voted = br->halt_check & BRANCH_VOTED;
 	const char *name = clk_hw_get_name(&br->clkr.hw);
 
-	/* Skip checking halt bit if the clock is in hardware gated mode */
-	if (clk_branch_in_hwcg_mode(br))
+	/*
+	 * Skip checking halt bit if we're explicitly ignoring the bit or the
+	 * clock is in hardware gated mode
+	 */
+	if (br->halt_check == BRANCH_HALT_SKIP || clk_branch_in_hwcg_mode(br))
 		return 0;
 
 	if (br->halt_check == BRANCH_HALT_DELAY || (!enabling && voted)) {
diff --git a/drivers/clk/qcom/clk-branch.h b/drivers/clk/qcom/clk-branch.h
index 284df3f3c55f..1702efb1c511 100644
--- a/drivers/clk/qcom/clk-branch.h
+++ b/drivers/clk/qcom/clk-branch.h
@@ -42,6 +42,7 @@ struct clk_branch {
 #define BRANCH_HALT_ENABLE		1 /* pol: 0 = halt */
 #define BRANCH_HALT_ENABLE_VOTED	(BRANCH_HALT_ENABLE | BRANCH_VOTED)
 #define BRANCH_HALT_DELAY		2 /* No bit to check; just delay */
+#define BRANCH_HALT_SKIP		3 /* Don't check halt bit */
 
 	struct clk_regmap clkr;
 };
diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
index 2a7489a84e69..b209a2fe86b9 100644
--- a/drivers/clk/qcom/clk-rcg.h
+++ b/drivers/clk/qcom/clk-rcg.h
@@ -1,15 +1,5 @@
-/*
- * Copyright (c) 2013, The Linux Foundation. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2013, 2018, The Linux Foundation. All rights reserved. */
 
 #ifndef __QCOM_CLK_RCG_H__
 #define __QCOM_CLK_RCG_H__
@@ -144,6 +134,7 @@ extern const struct clk_ops clk_dyn_rcg_ops;
  * @cmd_rcgr: corresponds to *_CMD_RCGR
  * @mnd_width: number of bits in m/n/d values
  * @hid_width: number of bits in half integer divider
+ * @safe_src_index: safe src index value
  * @parent_map: map from software's parent index to hardware's src_sel field
  * @freq_tbl: frequency table
  * @clkr: regmap clock handle
@@ -153,6 +144,7 @@ struct clk_rcg2 {
 	u32			cmd_rcgr;
 	u8			mnd_width;
 	u8			hid_width;
+	u8			safe_src_index;
 	const struct parent_map	*parent_map;
 	const struct freq_tbl	*freq_tbl;
 	struct clk_regmap	clkr;
@@ -167,5 +159,6 @@ extern const struct clk_ops clk_byte_ops;
 extern const struct clk_ops clk_byte2_ops;
 extern const struct clk_ops clk_pixel_ops;
 extern const struct clk_ops clk_gfx3d_ops;
+extern const struct clk_ops clk_rcg2_shared_ops;
 
 #endif
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index ec6cee8ff1bc..52208d4165f4 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) 2013, The Linux Foundation. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Copyright (c) 2013, 2018, The Linux Foundation. All rights reserved.
  */
 
 #include <linux/kernel.h>
@@ -42,6 +34,7 @@
 #define CFG_MODE_SHIFT		12
 #define CFG_MODE_MASK		(0x3 << CFG_MODE_SHIFT)
 #define CFG_MODE_DUAL_EDGE	(0x2 << CFG_MODE_SHIFT)
+#define CFG_HW_CLK_CTRL_MASK	BIT(20)
 
 #define M_REG			0x8
 #define N_REG			0xc
@@ -249,7 +242,7 @@ static int clk_rcg2_determine_floor_rate(struct clk_hw *hw,
 	return _freq_tbl_determine_rate(hw, rcg->freq_tbl, req, FLOOR);
 }
 
-static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
+static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
 {
 	u32 cfg, mask;
 	struct clk_hw *hw = &rcg->clkr.hw;
@@ -277,13 +270,21 @@ static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
 	}
 
 	mask = BIT(rcg->hid_width) - 1;
-	mask |= CFG_SRC_SEL_MASK | CFG_MODE_MASK;
+	mask |= CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK;
 	cfg = f->pre_div << CFG_SRC_DIV_SHIFT;
 	cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT;
 	if (rcg->mnd_width && f->n && (f->m != f->n))
 		cfg |= CFG_MODE_DUAL_EDGE;
-	ret = regmap_update_bits(rcg->clkr.regmap,
-			rcg->cmd_rcgr + CFG_REG, mask, cfg);
+
+	return regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG,
+					mask, cfg);
+}
+
+static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
+{
+	int ret;
+
+	ret = __clk_rcg2_configure(rcg, f);
 	if (ret)
 		return ret;
 
@@ -790,3 +791,141 @@ const struct clk_ops clk_gfx3d_ops = {
 	.determine_rate = clk_gfx3d_determine_rate,
 };
 EXPORT_SYMBOL_GPL(clk_gfx3d_ops);
+
+static int clk_rcg2_set_force_enable(struct clk_hw *hw)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	const char *name = clk_hw_get_name(hw);
+	int ret, count;
+
+	ret = regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + CMD_REG,
+				 CMD_ROOT_EN, CMD_ROOT_EN);
+	if (ret)
+		return ret;
+
+	/* wait for RCG to turn ON */
+	for (count = 500; count > 0; count--) {
+		if (clk_rcg2_is_enabled(hw))
+			return 0;
+
+		udelay(1);
+	}
+
+	pr_err("%s: RCG did not turn on\n", name);
+	return -ETIMEDOUT;
+}
+
+static int clk_rcg2_clear_force_enable(struct clk_hw *hw)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+
+	return regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + CMD_REG,
+					CMD_ROOT_EN, 0);
+}
+
+static int
+clk_rcg2_shared_force_enable_clear(struct clk_hw *hw, const struct freq_tbl *f)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	int ret;
+
+	ret = clk_rcg2_set_force_enable(hw);
+	if (ret)
+		return ret;
+
+	ret = clk_rcg2_configure(rcg, f);
+	if (ret)
+		return ret;
+
+	return clk_rcg2_clear_force_enable(hw);
+}
+
+static int clk_rcg2_shared_set_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long parent_rate)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	const struct freq_tbl *f;
+
+	f = qcom_find_freq(rcg->freq_tbl, rate);
+	if (!f)
+		return -EINVAL;
+
+	/*
+	 * In case clock is disabled, update the CFG, M, N and D registers
+	 * and don't hit the update bit of CMD register.
+	 */
+	if (!__clk_is_enabled(hw->clk))
+		return __clk_rcg2_configure(rcg, f);
+
+	return clk_rcg2_shared_force_enable_clear(hw, f);
+}
+
+static int clk_rcg2_shared_set_rate_and_parent(struct clk_hw *hw,
+		unsigned long rate, unsigned long parent_rate, u8 index)
+{
+	return clk_rcg2_shared_set_rate(hw, rate, parent_rate);
+}
+
+static int clk_rcg2_shared_enable(struct clk_hw *hw)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	int ret;
+
+	/*
+	 * Set the update bit because required configuration has already
+	 * been written in clk_rcg2_shared_set_rate()
+	 */
+	ret = clk_rcg2_set_force_enable(hw);
+	if (ret)
+		return ret;
+
+	ret = update_config(rcg);
+	if (ret)
+		return ret;
+
+	return clk_rcg2_clear_force_enable(hw);
+}
+
+static void clk_rcg2_shared_disable(struct clk_hw *hw)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	u32 cfg;
+
+	/*
+	 * Store current configuration as switching to safe source would clear
+	 * the SRC and DIV of CFG register
+	 */
+	regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &cfg);
+
+	/*
+	 * Park the RCG at a safe configuration - sourced off of safe source.
+	 * Force enable and disable the RCG while configuring it to safeguard
+	 * against any update signal coming from the downstream clock.
+	 * The current parent is still prepared and enabled at this point, and
+	 * the safe source is always on while application processor subsystem
+	 * is online. Therefore, the RCG can safely switch its parent.
+	 */
+	clk_rcg2_set_force_enable(hw);
+
+	regmap_write(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG,
+		     rcg->safe_src_index << CFG_SRC_SEL_SHIFT);
+
+	update_config(rcg);
+
+	clk_rcg2_clear_force_enable(hw);
+
+	/* Write back the stored configuration corresponding to current rate */
+	regmap_write(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, cfg);
+}
+
+const struct clk_ops clk_rcg2_shared_ops = {
+	.enable = clk_rcg2_shared_enable,
+	.disable = clk_rcg2_shared_disable,
+	.get_parent = clk_rcg2_get_parent,
+	.set_parent = clk_rcg2_set_parent,
+	.recalc_rate = clk_rcg2_recalc_rate,
+	.determine_rate = clk_rcg2_determine_rate,
+	.set_rate = clk_rcg2_shared_set_rate,
+	.set_rate_and_parent = clk_rcg2_shared_set_rate_and_parent,
+};
+EXPORT_SYMBOL_GPL(clk_rcg2_shared_ops);
diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c
new file mode 100644
index 000000000000..e78e6f5b99fc
--- /dev/null
+++ b/drivers/clk/qcom/gcc-sdm845.c
@@ -0,0 +1,3465 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+#include <dt-bindings/clock/qcom,gcc-sdm845.h>
+
+#include "common.h"
+#include "clk-regmap.h"
+#include "clk-pll.h"
+#include "clk-rcg.h"
+#include "clk-branch.h"
+#include "clk-alpha-pll.h"
+#include "gdsc.h"
+#include "reset.h"
+
+#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
+
+enum {
+	P_BI_TCXO,
+	P_AUD_REF_CLK,
+	P_CORE_BI_PLL_TEST_SE,
+	P_GPLL0_OUT_EVEN,
+	P_GPLL0_OUT_MAIN,
+	P_GPLL4_OUT_MAIN,
+	P_SLEEP_CLK,
+};
+
+static const struct parent_map gcc_parent_map_0[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 1 },
+	{ P_GPLL0_OUT_EVEN, 6 },
+	{ P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const char * const gcc_parent_names_0[] = {
+	"bi_tcxo",
+	"gpll0",
+	"gpll0_out_even",
+	"core_bi_pll_test_se",
+};
+
+static const struct parent_map gcc_parent_map_1[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 1 },
+	{ P_SLEEP_CLK, 5 },
+	{ P_GPLL0_OUT_EVEN, 6 },
+	{ P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const char * const gcc_parent_names_1[] = {
+	"bi_tcxo",
+	"gpll0",
+	"core_pi_sleep_clk",
+	"gpll0_out_even",
+	"core_bi_pll_test_se",
+};
+
+static const struct parent_map gcc_parent_map_2[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_SLEEP_CLK, 5 },
+	{ P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const char * const gcc_parent_names_2[] = {
+	"bi_tcxo",
+	"core_pi_sleep_clk",
+	"core_bi_pll_test_se",
+};
+
+static const struct parent_map gcc_parent_map_3[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 1 },
+	{ P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const char * const gcc_parent_names_3[] = {
+	"bi_tcxo",
+	"gpll0",
+	"core_bi_pll_test_se",
+};
+
+static const struct parent_map gcc_parent_map_4[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const char * const gcc_parent_names_4[] = {
+	"bi_tcxo",
+	"core_bi_pll_test_se",
+};
+
+static const struct parent_map gcc_parent_map_5[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 1 },
+	{ P_GPLL4_OUT_MAIN, 5 },
+	{ P_GPLL0_OUT_EVEN, 6 },
+	{ P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const char * const gcc_parent_names_5[] = {
+	"bi_tcxo",
+	"gpll0",
+	"gpll4",
+	"gpll0_out_even",
+	"core_bi_pll_test_se",
+};
+
+static const struct parent_map gcc_parent_map_6[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 1 },
+	{ P_AUD_REF_CLK, 2 },
+	{ P_GPLL0_OUT_EVEN, 6 },
+	{ P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const char * const gcc_parent_names_6[] = {
+	"bi_tcxo",
+	"gpll0",
+	"aud_ref_clk",
+	"gpll0_out_even",
+	"core_bi_pll_test_se",
+};
+
+static const char * const gcc_parent_names_7[] = {
+	"bi_tcxo",
+	"gpll0",
+	"gpll0_out_even",
+	"core_bi_pll_test_se",
+};
+
+static const char * const gcc_parent_names_8[] = {
+	"bi_tcxo",
+	"gpll0",
+	"core_bi_pll_test_se",
+};
+
+static const struct parent_map gcc_parent_map_10[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 1 },
+	{ P_GPLL4_OUT_MAIN, 5 },
+	{ P_GPLL0_OUT_EVEN, 6 },
+	{ P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const char * const gcc_parent_names_10[] = {
+	"bi_tcxo",
+	"gpll0",
+	"gpll4",
+	"gpll0_out_even",
+	"core_bi_pll_test_se",
+};
+
+static struct clk_alpha_pll gpll0 = {
+	.offset = 0x0,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpll0",
+			.parent_names = (const char *[]){ "bi_tcxo" },
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_fixed_fabia_ops,
+		},
+	},
+};
+
+static struct clk_alpha_pll gpll4 = {
+	.offset = 0x76000,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpll4",
+			.parent_names = (const char *[]){ "bi_tcxo" },
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_fixed_fabia_ops,
+		},
+	},