diff options
author | David Howells <dhowells@redhat.com> | 2005-06-23 22:00:49 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-06-24 00:05:18 -0700 |
commit | 76d8aeabfeb1c42641a81c44280177b9a08670d8 (patch) | |
tree | 0a584439bb44e440717aa77a1398ba9eea24a137 | |
parent | 7286aa9b9ab35f20b1ff16d867f4535701df99b5 (diff) |
[PATCH] keys: Discard key spinlock and use RCU for key payload
The attached patch changes the key implementation in a number of ways:
(1) It removes the spinlock from the key structure.
(2) The key flags are now accessed using atomic bitops instead of
write-locking the key spinlock and using C bitwise operators.
The three instantiation flags are dealt with with the construction
semaphore held during the request_key/instantiate/negate sequence, thus
rendering the spinlock superfluous.
The key flags are also now bit numbers not bit masks.
(3) The key payload is now accessed using RCU. This permits the recursive
keyring search algorithm to be simplified greatly since no locks need be
taken other than the usual RCU preemption disablement. Searching now does
not require any locks or semaphores to be held; merely that the starting
keyring be pinned.
(4) The keyring payload now includes an RCU head so that it can be disposed
of by call_rcu(). This requires that the payload be copied on unlink to
prevent introducing races in copy-down vs search-up.
(5) The user key payload is now a structure with the data following it. It
includes an RCU head like the keyring payload and for the same reason. It
also contains a data length because the data length in the key may be
changed on another CPU whilst an RCU protected read is in progress on the
payload. This would then see the supposed RCU payload and the on-key data
length getting out of sync.
I'm tempted to drop the key's datalen entirely, except that it's used in
conjunction with quota management and so is a little tricky to get rid
of.
(6) Update the keys documentation.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-rw-r--r-- | Documentation/keys.txt | 285 | ||||
-rw-r--r-- | include/linux/key-ui.h | 6 | ||||
-rw-r--r-- | include/linux/key.h | 25 | ||||
-rw-r--r-- | security/keys/key.c | 94 | ||||
-rw-r--r-- | security/keys/keyctl.c | 23 | ||||
-rw-r--r-- | security/keys/keyring.c | 245 | ||||
-rw-r--r-- | security/keys/proc.c | 21 | ||||
-rw-r--r-- | security/keys/process_keys.c | 12 | ||||
-rw-r--r-- | security/keys/request_key.c | 32 | ||||
-rw-r--r-- | security/keys/user_defined.c | 85 |
10 files changed, 480 insertions, 348 deletions
diff --git a/Documentation/keys.txt b/Documentation/keys.txt index 36d80aeeaf28..3df40c1fe15a 100644 --- a/Documentation/keys.txt +++ b/Documentation/keys.txt @@ -22,6 +22,7 @@ This document has the following sections: - New procfs files - Userspace system call interface - Kernel services + - Notes on accessing payload contents - Defining a key type - Request-key callback service - Key access filesystem @@ -45,27 +46,26 @@ Each key has a number of attributes: - State. - (*) Each key is issued a serial number of type key_serial_t that is unique - for the lifetime of that key. All serial numbers are positive non-zero - 32-bit integers. + (*) Each key is issued a serial number of type key_serial_t that is unique for + the lifetime of that key. All serial numbers are positive non-zero 32-bit + integers. Userspace programs can use a key's serial numbers as a way to gain access to it, subject to permission checking. (*) Each key is of a defined "type". Types must be registered inside the - kernel by a kernel service (such as a filesystem) before keys of that - type can be added or used. Userspace programs cannot define new types - directly. + kernel by a kernel service (such as a filesystem) before keys of that type + can be added or used. Userspace programs cannot define new types directly. - Key types are represented in the kernel by struct key_type. This defines - a number of operations that can be performed on a key of that type. + Key types are represented in the kernel by struct key_type. This defines a + number of operations that can be performed on a key of that type. Should a type be removed from the system, all the keys of that type will be invalidated. (*) Each key has a description. This should be a printable string. The key - type provides an operation to perform a match between the description on - a key and a criterion string. + type provides an operation to perform a match between the description on a + key and a criterion string. (*) Each key has an owner user ID, a group ID and a permissions mask. These are used to control what a process may do to a key from userspace, and @@ -74,10 +74,10 @@ Each key has a number of attributes: (*) Each key can be set to expire at a specific time by the key type's instantiation function. Keys can also be immortal. - (*) Each key can have a payload. This is a quantity of data that represent - the actual "key". In the case of a keyring, this is a list of keys to - which the keyring links; in the case of a user-defined key, it's an - arbitrary blob of data. + (*) Each key can have a payload. This is a quantity of data that represent the + actual "key". In the case of a keyring, this is a list of keys to which + the keyring links; in the case of a user-defined key, it's an arbitrary + blob of data. Having a payload is not required; and the payload can, in fact, just be a value stored in the struct key itself. @@ -92,8 +92,8 @@ Each key has a number of attributes: (*) Each key can be in one of a number of basic states: - (*) Uninstantiated. The key exists, but does not have any data - attached. Keys being requested from userspace will be in this state. + (*) Uninstantiated. The key exists, but does not have any data attached. + Keys being requested from userspace will be in this state. (*) Instantiated. This is the normal state. The key is fully formed, and has data attached. @@ -140,10 +140,10 @@ The key service provides a number of features besides keys: clone, fork, vfork or execve occurs. A new keyring is created only when required. - The process-specific keyring is replaced with an empty one in the child - on clone, fork, vfork unless CLONE_THREAD is supplied, in which case it - is shared. execve also discards the process's process keyring and creates - a new one. + The process-specific keyring is replaced with an empty one in the child on + clone, fork, vfork unless CLONE_THREAD is supplied, in which case it is + shared. execve also discards the process's process keyring and creates a + new one. The session-specific keyring is persistent across clone, fork, vfork and execve, even when the latter executes a set-UID or set-GID binary. A @@ -177,11 +177,11 @@ The key service provides a number of features besides keys: If a system call that modifies a key or keyring in some way would put the user over quota, the operation is refused and error EDQUOT is returned. - (*) There's a system call interface by which userspace programs can create - and manipulate keys and keyrings. + (*) There's a system call interface by which userspace programs can create and + manipulate keys and keyrings. - (*) There's a kernel interface by which services can register types and - search for keys. + (*) There's a kernel interface by which services can register types and search + for keys. (*) There's a way for the a search done from the kernel to call back to userspace to request a key that can't be found in a process's keyrings. @@ -194,9 +194,9 @@ The key service provides a number of features besides keys: KEY ACCESS PERMISSIONS ====================== -Keys have an owner user ID, a group access ID, and a permissions mask. The -mask has up to eight bits each for user, group and other access. Only five of -each set of eight bits are defined. These permissions granted are: +Keys have an owner user ID, a group access ID, and a permissions mask. The mask +has up to eight bits each for user, group and other access. Only five of each +set of eight bits are defined. These permissions granted are: (*) View @@ -210,8 +210,8 @@ each set of eight bits are defined. These permissions granted are: (*) Write - This permits a key's payload to be instantiated or updated, or it allows - a link to be added to or removed from a keyring. + This permits a key's payload to be instantiated or updated, or it allows a + link to be added to or removed from a keyring. (*) Search @@ -238,8 +238,8 @@ about the status of the key service: (*) /proc/keys This lists all the keys on the system, giving information about their - type, description and permissions. The payload of the key is not - available this way: + type, description and permissions. The payload of the key is not available + this way: SERIAL FLAGS USAGE EXPY PERM UID GID TYPE DESCRIPTION: SUMMARY 00000001 I----- 39 perm 1f0000 0 0 keyring _uid_ses.0: 1/4 @@ -318,21 +318,21 @@ The main syscalls are: If a key of the same type and description as that proposed already exists in the keyring, this will try to update it with the given payload, or it will return error EEXIST if that function is not supported by the key - type. The process must also have permission to write to the key to be - able to update it. The new key will have all user permissions granted and - no group or third party permissions. + type. The process must also have permission to write to the key to be able + to update it. The new key will have all user permissions granted and no + group or third party permissions. - Otherwise, this will attempt to create a new key of the specified type - and description, and to instantiate it with the supplied payload and - attach it to the keyring. In this case, an error will be generated if the - process does not have permission to write to the keyring. + Otherwise, this will attempt to create a new key of the specified type and + description, and to instantiate it with the supplied payload and attach it + to the keyring. In this case, an error will be generated if the process + does not have permission to write to the keyring. The payload is optional, and the pointer can be NULL if not required by the type. The payload is plen in size, and plen can be zero for an empty payload. - A new keyring can be generated by setting type "keyring", the keyring - name as the description (or NULL) and setting the payload to NULL. + A new keyring can be generated by setting type "keyring", the keyring name + as the description (or NULL) and setting the payload to NULL. User defined keys can be created by specifying type "user". It is recommended that a user defined key's description by prefixed with a type @@ -369,9 +369,9 @@ The keyctl syscall functions are: key_serial_t keyctl(KEYCTL_GET_KEYRING_ID, key_serial_t id, int create); - The special key specified by "id" is looked up (with the key being - created if necessary) and the ID of the key or keyring thus found is - returned if it exists. + The special key specified by "id" is looked up (with the key being created + if necessary) and the ID of the key or keyring thus found is returned if + it exists. If the key does not yet exist, the key will be created if "create" is non-zero; and the error ENOKEY will be returned if "create" is zero. @@ -402,8 +402,8 @@ The keyctl syscall functions are: This will try to update the specified key with the given payload, or it will return error EOPNOTSUPP if that function is not supported by the key - type. The process must also have permission to write to the key to be - able to update it. + type. The process must also have permission to write to the key to be able + to update it. The payload is of length plen, and may be absent or empty as for add_key(). @@ -422,8 +422,8 @@ The keyctl syscall functions are: long keyctl(KEYCTL_CHOWN, key_serial_t key, uid_t uid, gid_t gid); - This function permits a key's owner and group ID to be changed. Either - one of uid or gid can be set to -1 to suppress that change. + This function permits a key's owner and group ID to be changed. Either one + of uid or gid can be set to -1 to suppress that change. Only the superuser can change a key's owner to something other than the key's current owner. Similarly, only the superuser can change a key's @@ -484,12 +484,12 @@ The keyctl syscall functions are: long keyctl(KEYCTL_LINK, key_serial_t keyring, key_serial_t key); - This function creates a link from the keyring to the key. The process - must have write permission on the keyring and must have link permission - on the key. + This function creates a link from the keyring to the key. The process must + have write permission on the keyring and must have link permission on the + key. - Should the keyring not be a keyring, error ENOTDIR will result; and if - the keyring is full, error ENFILE will result. + Should the keyring not be a keyring, error ENOTDIR will result; and if the + keyring is full, error ENFILE will result. The link procedure checks the nesting of the keyrings, returning ELOOP if it appears to deep or EDEADLK if the link would introduce a cycle. @@ -503,8 +503,8 @@ The keyctl syscall functions are: specified key, and removes it if found. Subsequent links to that key are ignored. The process must have write permission on the keyring. - If the keyring is not a keyring, error ENOTDIR will result; and if the - key is not present, error ENOENT will be the result. + If the keyring is not a keyring, error ENOTDIR will result; and if the key + is not present, error ENOENT will be the result. (*) Search a keyring tree for a key: @@ -513,9 +513,9 @@ The keyctl syscall functions are: const char *type, const char *description, key_serial_t dest_keyring); - This searches the keyring tree headed by the specified keyring until a - key is found that matches the type and description criteria. Each keyring - is checked for keys before recursion into its children occurs. + This searches the keyring tree headed by the specified keyring until a key + is found that matches the type and description criteria. Each keyring is + checked for keys before recursion into its children occurs. The process must have search permission on the top level keyring, or else error EACCES will result. Only keyrings that the process has search @@ -549,8 +549,8 @@ The keyctl syscall functions are: As much of the data as can be fitted into the buffer will be copied to userspace if the buffer pointer is not NULL. - On a successful return, the function will always return the amount of - data available rather than the amount copied. + On a successful return, the function will always return the amount of data + available rather than the amount copied. (*) Instantiate a partially constructed key. @@ -568,8 +568,8 @@ The keyctl syscall functions are: it, and the key must be uninstantiated. If a keyring is specified (non-zero), the key will also be linked into - that keyring, however all the constraints applying in KEYCTL_LINK apply - in this case too. + that keyring, however all the constraints applying in KEYCTL_LINK apply in + this case too. The payload and plen arguments describe the payload data as for add_key(). @@ -587,8 +587,8 @@ The keyctl syscall functions are: it, and the key must be uninstantiated. If a keyring is specified (non-zero), the key will also be linked into - that keyring, however all the constraints applying in KEYCTL_LINK apply - in this case too. + that keyring, however all the constraints applying in KEYCTL_LINK apply in + this case too. =============== @@ -601,17 +601,14 @@ be broken down into two areas: keys and key types. Dealing with keys is fairly straightforward. Firstly, the kernel service registers its type, then it searches for a key of that type. It should retain the key as long as it has need of it, and then it should release it. For a -filesystem or device file, a search would probably be performed during the -open call, and the key released upon close. How to deal with conflicting keys -due to two different users opening the same file is left to the filesystem -author to solve. - -When accessing a key's payload data, key->lock should be at least read locked, -or else the data may be changed by an update being performed from userspace -whilst the driver or filesystem is trying to access it. If no update method is -supplied, then the key's payload may be accessed without holding a lock as -there is no way to change it, provided it can be guaranteed that the key's -type definition won't go away. +filesystem or device file, a search would probably be performed during the open +call, and the key released upon close. How to deal with conflicting keys due to +two different users opening the same file is left to the filesystem author to +solve. + +When accessing a key's payload contents, certain precautions must be taken to +prevent access vs modification races. See the section "Notes on accessing +payload contents" for more information. (*) To search for a key, call: @@ -690,6 +687,54 @@ type definition won't go away. void unregister_key_type(struct key_type *type); +=================================== +NOTES ON ACCESSING PAYLOAD CONTENTS +=================================== + +The simplest payload is just a number in key->payload.value. In this case, +there's no need to indulge in RCU or locking when accessing the payload. + +More complex payload contents must be allocated and a pointer to them set in +key->payload.data. One of the following ways must be selected to access the +data: + + (1) Unmodifyable key type. + + If the key type does not have a modify method, then the key's payload can + be accessed without any form of locking, provided that it's known to be + instantiated (uninstantiated keys cannot be "found"). + + (2) The key's semaphore. + + The semaphore could be used to govern access to the payload and to control + the payload pointer. It must be write-locked for modifications and would + have to be read-locked for general access. The disadvantage of doing this + is that the accessor may be required to sleep. + + (3) RCU. + + RCU must be used when the semaphore isn't already held; if the semaphore + is held then the contents can't change under you unexpectedly as the + semaphore must still be used to serialise modifications to the key. The + key management code takes care of this for the key type. + + However, this means using: + + rcu_read_lock() ... rcu_dereference() ... rcu_read_unlock() + + to read the pointer, and: + + rcu_dereference() ... rcu_assign_pointer() ... call_rcu() + + to set the pointer and dispose of the old contents after a grace period. + Note that only the key type should ever modify a key's payload. + + Furthermore, an RCU controlled payload must hold a struct rcu_head for the + use of call_rcu() and, if the payload is of variable size, the length of + the payload. key->datalen cannot be relied upon to be consistent with the + payload just dereferenced if the key's semaphore is not held. + + =================== DEFINING A KEY TYPE =================== @@ -717,15 +762,15 @@ The structure has a number of fields, some of which are mandatory: int key_payload_reserve(struct key *key, size_t datalen); - With the revised data length. Error EDQUOT will be returned if this is - not viable. + With the revised data length. Error EDQUOT will be returned if this is not + viable. (*) int (*instantiate)(struct key *key, const void *data, size_t datalen); This method is called to attach a payload to a key during construction. - The payload attached need not bear any relation to the data passed to - this function. + The payload attached need not bear any relation to the data passed to this + function. If the amount of data attached to the key differs from the size in keytype->def_datalen, then key_payload_reserve() should be called. @@ -734,38 +779,47 @@ The structure has a number of fields, some of which are mandatory: The fact that KEY_FLAG_INSTANTIATED is not set in key->flags prevents anything else from gaining access to the key. - This method may sleep if it wishes. + It is safe to sleep in this method. (*) int (*duplicate)(struct key *key, const struct key *source); If this type of key can be duplicated, then this method should be - provided. It is called to copy the payload attached to the source into - the new key. The data length on the new key will have been updated and - the quota adjusted already. + provided. It is called to copy the payload attached to the source into the + new key. The data length on the new key will have been updated and the + quota adjusted already. This method will be called with the source key's semaphore read-locked to - prevent its payload from being changed. It is safe to sleep here. + prevent its payload from being changed, thus RCU constraints need not be + applied to the source key. + + This method does not have to lock the destination key in order to attach a + payload. The fact that KEY_FLAG_INSTANTIATED is not set in key->flags + prevents anything else from gaining access to the key. + + It is safe to sleep in this method. (*) int (*update)(struct key *key, const void *data, size_t datalen); - If this type of key can be updated, then this method should be - provided. It is called to update a key's payload from the blob of data - provided. + If this type of key can be updated, then this method should be provided. + It is called to update a key's payload from the blob of data provided. key_payload_reserve() should be called if the data length might change - before any changes are actually made. Note that if this succeeds, the - type is committed to changing the key because it's already been altered, - so all memory allocation must be done first. + before any changes are actually made. Note that if this succeeds, the type + is committed to changing the key because it's already been altered, so all + memory allocation must be done first. + + The key will have its semaphore write-locked before this method is called, + but this only deters other writers; any changes to the key's payload must + be made under RCU conditions, and call_rcu() must be used to dispose of + the old payload. - key_payload_reserve() should be called with the key->lock write locked, - and the changes to the key's attached payload should be made before the - key is locked. + key_payload_reserve() should be called before the changes are made, but + after all allocations and other potentially failing function calls are + made. - The key will have its semaphore write-locked before this method is - called. Any changes to the key should be made with the key's rwlock - write-locked also. It is safe to sleep here. + It is safe to sleep in this method. (*) int (*match)(const struct key *key, const void *desc); @@ -782,12 +836,12 @@ The structure has a number of fields, some of which are mandatory: (*) void (*destroy)(struct key *key); - This method is optional. It is called to discard the payload data on a - key when it is being destroyed. + This method is optional. It is called to discard the payload data on a key + when it is being destroyed. - This method does not need to lock the key; it can consider the key as - being inaccessible. Note that the key's type may have changed before this - function is called. + This method does not need to lock the key to access the payload; it can + consider the key as being inaccessible at this time. Note that the key's + type may have been changed before this function is called. It is not safe to sleep in this method; the caller may hold spinlocks. @@ -797,26 +851,31 @@ The structure has a number of fields, some of which are mandatory: This method is optional. It is called during /proc/keys reading to summarise a key's description and payload in text form. - This method will be called with the key's rwlock read-locked. This will - prevent the key's payload and state changing; also the description should - not change. This also means it is not safe to sleep in this method. + This method will be called with the RCU read lock held. rcu_dereference() + should be used to read the payload pointer if the payload is to be + accessed. key->datalen cannot be trusted to stay consistent with the + contents of the payload. + + The description will not change, though the key's state may. + + It is not safe to sleep in this method; the RCU read lock is held by the + caller. (*) long (*read)(const struct key *key, char __user *buffer, size_t buflen); This method is optional. It is called by KEYCTL_READ to translate the - key's payload into something a blob of data for userspace to deal - with. Ideally, the blob should be in the same format as that passed in to - the instantiate and update methods. + key's payload into something a blob of data for userspace to deal with. + Ideally, the blob should be in the same format as that passed in to the + instantiate and update methods. If successful, the blob size that could be produced should be returned rather than the size copied. - This method will be called with the key's semaphore read-locked. This - will prevent the key's payload changing. It is not necessary to also - read-lock key->lock when accessing the key's payload. It is safe to sleep - in this method, such as might happen when the userspace buffer is - accessed. + This method will be called with the key's semaphore read-locked. This will + prevent the key's payload changing. It is not necessary to use RCU locking + when accessing the key's payload. It is safe to sleep in this method, such + as might happen when the userspace buffer is accessed. ============================ @@ -853,8 +912,8 @@ If it returns with the key remaining in the unconstructed state, the key will be marked as being negative, it will be added to the session keyring, and an error will be returned to the key requestor. -Supplementary information may be provided from whoever or whatever invoked -this service. This will be passed as the <callout_info> parameter. If no such +Supplementary information may be provided from whoever or whatever invoked this +service. This will be passed as the <callout_info> parameter. If no such information was made available, then "-" will be passed as this parameter instead. diff --git a/include/linux/key-ui.h b/include/linux/key-ui.h index 60cc7b762e78..159ca8d54e9a 100644 --- a/include/linux/key-ui.h +++ b/include/linux/key-ui.h @@ -31,8 +31,10 @@ extern spinlock_t key_serial_lock; * subscribed */ struct keyring_list { - unsigned maxkeys; /* max keys this list can hold */ - unsigned nkeys; /* number of keys currently held */ + struct rcu_head rcu; /* RCU deletion hook */ + unsigned short maxkeys; /* max keys this list can hold */ + unsigned short nkeys; /* number of keys currently held */ + unsigned short delkey; /* key to be unlinked by RCU */ struct key *keys[0]; }; diff --git a/include/linux/key.h b/include/linux/key.h index 6aa46d0e812f..2c24ffaca86f 100644 --- a/include/linux/key.h +++ b/include/linux/key.h @@ -18,7 +18,7 @@ #include <linux/types.h> #include <linux/list.h> #include <linux/rbtree.h> -#include <linux/spinlock.h> +#include <linux/rcupdate.h> #include <asm/atomic.h> #ifdef __KERNEL__ @@ -78,7 +78,6 @@ struct key { key_serial_t serial; /* key serial number */ struct rb_node serial_node; struct key_type *type; /* type of key */ - rwlock_t lock; /* examination vs change lock */ struct rw_semaphore sem; /* change vs change sem */ struct key_user *user; /* owner of this key */ time_t expiry; /* time at which key expires (or 0) */ @@ -86,14 +85,10 @@ struct key { gid_t gid; key_perm_t perm; /* access permissions */ unsigned short quotalen; /* length added to quota */ - unsigned short datalen; /* payload data length */ - unsigned short flags; /* status flags (change with lock writelocked) */ -#define KEY_FLAG_INSTANTIATED 0x00000001 /* set if key has been instantiated */ -#define KEY_FLAG_DEAD 0x00000002 /* set if key type has been deleted */ -#define KEY_FLAG_REVOKED 0x00000004 /* set if key had been revoked */ -#define KEY_FLAG_IN_QUOTA 0x00000008 /* set if key consumes quota */ -#define KEY_FLAG_USER_CONSTRUCT 0x00000010 /* set if key is being constructed in userspace */ -#define KEY_FLAG_NEGATIVE 0x00000020 /* set if key is negative */ + unsigned short datalen; /* payload data length + * - may not match RCU dereferenced payload + * - payload should contain own length + */ #ifdef KEY_DEBUGGING unsigned magic; @@ -101,6 +96,14 @@ struct key { #define KEY_DEBUG_MAGIC_X 0xf8e9dacbu #endif + unsigned long flags; /* status flags (change with bitops) */ +#define KEY_FLAG_INSTANTIATED 0 /* set if key has been instantiated */ +#define KEY_FLAG_DEAD 1 /* set if key type has been deleted */ +#define KEY_FLAG_REVOKED 2 /* set if key had been revoked */ +#define KEY_FLAG_IN_QUOTA 3 /* set if key consumes quota */ +#define KEY_FLAG_USER_CONSTRUCT 4 /* set if key is being constructed in userspace */ +#define KEY_FLAG_NEGATIVE 5 /* set if key is negative */ + /* the description string * - this is used to match a key against search criteria * - this should be a printable string @@ -250,6 +253,8 @@ extern int keyring_add_key(struct key *keyring, extern struct key *key_lookup(key_serial_t id); +extern void keyring_replace_payload(struct key *key, void *replacement); + #define key_serial(key) ((key) ? (key)->serial : 0) /* diff --git a/security/keys/key.c b/security/keys/key.c index 59402c843203..1fdfccb3fe43 100644 --- a/security/keys/key.c +++ b/security/keys/key.c @@ -294,7 +294,6 @@ struct key *key_alloc(struct key_type *type, const char *desc, } atomic_set(&key->usage, 1); - rwlock_init(&key->lock); init_rwsem(&key->sem); key->type = type; key->user = user; @@ -308,7 +307,7 @@ struct key *key_alloc(struct key_type *type, const char *desc, key->payload.data = NULL; if (!not_in_quota) - key->flags |= KEY_FLAG_IN_QUOTA; + key->flags |= 1 << KEY_FLAG_IN_QUOTA; memset(&key->type_data, 0, sizeof(key->type_data)); @@ -359,7 +358,7 @@ int key_payload_reserve(struct key *key, size_t datalen) key_check(key); /* contemplate the quota adjustment */ - if (delta != 0 && key->flags & KEY_FLAG_IN_QUOTA) { + if (delta != 0 && test_bit(KEY_FLAG_IN_QUOTA, &key->flags)) { spin_lock(&key->user->lock); if (delta > 0 && @@ -405,23 +404,17 @@ static int __key_instantiate_and_link(struct key *key, down_write(&key_construction_sem); /* can't instantiate twice */ - if (!(key->flags & KEY_FLAG_INSTANTIATED)) { + if (!test_bit(KEY_FLAG_INSTANTIATED, &key->flags)) { /* instantiate the key */ ret = key->type->instantiate(key, data, datalen); if (ret == 0) { /* mark the key as being instantiated */ - write_lock(&key->lock); - atomic_inc(&key->user->nikeys); - key->flags |= KEY_FLAG_INSTANTIATED; + set_bit(KEY_FLAG_INSTANTIATED, &key->flags); - if (key->flags & KEY_FLAG_USER_CONSTRUCT) { - key->flags &= ~KEY_FLAG_USER_CONSTRUCT; + if (test_and_clear_bit(KEY_FLAG_USER_CONSTRUCT, &key->flags)) awaken = 1; - } - - write_unlock(&key->lock); /* and link it into the destination keyring */ if (keyring) @@ -486,21 +479,17 @@ int key_negate_and_link(struct key *key, down_write(&key_construction_sem); /* can't instantiate twice */ - if (!(key->flags & KEY_FLAG_INSTANTIATED)) { + if (!test_bit(KEY_FLAG_INSTANTIATED, &key->flags)) { /* mark the key as being negatively instantiated */ - write_lock(&key->lock); - atomic_inc(&key->user->nikeys); - key->flags |= KEY_FLAG_INSTANTIATED | KEY_FLAG_NEGATIVE; + set_bit(KEY_FLAG_NEGATIVE, &key->flags); + set_bit(KEY_FLAG_INSTANTIATED, &key->flags); now = current_kernel_time(); key->expiry = now.tv_sec + timeout; - if (key->flags & KEY_FLAG_USER_CONSTRUCT) { - key->flags &= ~KEY_FLAG_USER_CONSTRUCT; + if (test_and_clear_bit(KEY_FLAG_USER_CONSTRUCT, &key->flags)) awaken = 1; - } - write_unlock(&key->lock); ret = 0; /* and link it into the destination keyring */ @@ -553,8 +542,10 @@ static void key_cleanup(void *data) rb_erase(&key->serial_node, &key_serial_tree); spin_unlock(&key_serial_lock); + key_check(key); + /* deal with the user's key tracking and quota */ - if (key->flags & KEY_FLAG_IN_QUOTA) { + if (test_bit(KEY_FLAG_IN_QUOTA, &key->flags)) { spin_lock(&key->user->lock); key->user->qnkeys--; key->user->qnbytes -= key->quotalen; @@ -562,7 +553,7 @@ static void key_cleanup(void *data) } atomic_dec(&key->user->nkeys); - if (key->flags & KEY_FLAG_INSTANTIATED) + if (test_bit(KEY_FLAG_INSTANTIATED, &key->flags)) atomic_dec(&key->user->nikeys); key_user_put(key->user); @@ -631,9 +622,9 @@ struct key *key_lookup(key_serial_t id) goto error; found: - /* pretent doesn't exist if it's dead */ + /* pretend it doesn't exist if it's dead */ if (atomic_read(&key->usage) == 0 || - (key->flags & KEY_FLAG_DEAD) || + test_bit(KEY_FLAG_DEAD, &key->flags) || key->type == &key_type_dead) goto not_found; @@ -708,12 +699,9 @@ static inline struct key *__key_update(struct key *key, const void *payload, ret = key->type->update(key, payload, plen); - if (ret == 0) { + if (ret == 0) /* updating a negative key instantiates it */ - write_lock(&key->lock); - key->flags &= ~KEY_FLAG_NEGATIVE; - write_unlock(&key->lock); - } + clear_bit(KEY_FLAG_NEGATIVE, &key->flags); up_write(&key->sem); @@ -841,12 +829,9 @@ int key_update(struct key *key, const void *payload, size_t plen) down_write(&key->sem); ret = key->type->update(key, payload, plen); - if (ret == 0) { + if (ret == 0) /* updating a negative key instantiates it */ - write_lock(&key->lock); - key->flags &= ~KEY_FLAG_NEGATIVE; - write_unlock(&key->lock); - } + clear_bit(KEY_FLAG_NEGATIVE, &key->flags); up_write(&key->sem); } @@ -892,10 +877,7 @@ struct key *key_duplicate(struct key *source, const char *desc) goto error2; atomic_inc(&key->user->nikeys); - - write_lock(&key->lock); - key->flags |= KEY_FLAG_INSTANTIATED; - write_unlock(&key->lock); + set_bit(KEY_FLAG_INSTANTIATED, &key->flags); error_k: up_read(&key_types_sem); @@ -922,9 +904,7 @@ void key_revoke(struct key *key) /* make sure no one's trying to change or use the key when we mark * it */ down_write(&key->sem); - write_lock(&key->lock); - key->flags |= KEY_FLAG_REVOKED; - write_unlock(&key->lock); + set_bit(KEY_FLAG_REVOKED, &key->flags); up_write(&key->sem); } /* end key_revoke() */ @@ -975,24 +955,33 @@ void unregister_key_type(struct key_type *ktype) /* withdraw the key type */ list_del_init(&ktype->link); - /* need to withdraw all keys of this type */ + /* mark all the keys of this type dead */ spin_lock(&key_serial_lock); for (_n = rb_first(&key_serial_tree); _n; _n = rb_next(_n)) { key = rb_entry(_n, struct key, serial_node); - if (key->type != ktype) - continue; + if (key->type == ktype) + key->type = &key_type_dead; + } + + spin_unlock(&key_serial_lock); + + /* make sure everyone revalidates their keys */ + synchronize_kernel(); + + /* we should now be able to destroy the payloads of all the keys of + * this type with impunity */ + spin_lock(&key_serial_lock); - write_lock(&key->lock); - key->type = &key_type_dead; - write_unlock(&key->lock); + for (_n = rb_first(&key_serial_tree); _n; _n = rb_next(_n)) { + key = rb_entry(_n, struct key, serial_node); - /* there shouldn't be anyone looking at the description or - * payload now */ - if (ktype->destroy) - ktype->destroy(key); - memset(&key->payload, 0xbd, sizeof(key->payload)); + if (key->type == ktype) { + if (ktype->destroy) + ktype->destroy(key); + memset(&key->payload, 0xbd, sizeof(key->payload)); + } } spin_unlock(&key_serial_lock); @@ -1037,4 +1026,5 @@ void __init key_init(void) /* link the two root keyrings together */ key_link(&root_session_keyring, &root_user_keyring); + |