summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2012-04-13 14:11:36 +0200
committerLinus Walleij <linus.walleij@linaro.org>2012-05-02 00:39:55 +0200
commit72fb92200d6c31b9982c06784e4bcff2f5b7d8b6 (patch)
tree9ebe8f94f118da799944c8067ec233de06c13356
parentdece3709b71a704e810134056f1990922e574da1 (diff)
mfd/ab5500: delete AB5500 support
This platform has been obsoleted and was only available inside of ST-Ericsson, no users of this code are left in the world. This deletes the core U5500 support entirely in the same manner as the obsoleted U8500 silicon was previously deleted. Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Jonas Aberg <jonas.aberg@stericsson.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-rw-r--r--drivers/mfd/Kconfig17
-rw-r--r--drivers/mfd/Makefile2
-rw-r--r--drivers/mfd/ab5500-core.c1439
-rw-r--r--drivers/mfd/ab5500-debugfs.c807
-rw-r--r--drivers/mfd/ab5500-debugfs.h22
-rw-r--r--include/linux/mfd/abx500.h5
-rw-r--r--include/linux/mfd/abx500/ab5500.h140
7 files changed, 1 insertions, 2431 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index fcda9b6a9b28..d875bfa56ad5 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -648,23 +648,6 @@ config EZX_PCAP
This enables the PCAP ASIC present on EZX Phones. This is
needed for MMC, TouchScreen, Sound, USB, etc..
-config AB5500_CORE
- bool "ST-Ericsson AB5500 Mixed Signal Power Management chip"
- depends on ABX500_CORE && MFD_DB5500_PRCMU
- select MFD_CORE
- help
- Select this option to enable access to AB5500 power management
- chip. This connects to the db5500 chip via the I2C bus via PRCMU.
- This chip embeds various other multimedia funtionalities as well.
-
-config AB5500_DEBUG
- bool "Enable debug info via debugfs"
- depends on AB5500_CORE && DEBUG_FS
- default y if DEBUG_FS
- help
- Select this option if you want debug information from the AB5500
- using the debug filesystem, debugfs.
-
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
depends on GENERIC_HARDIRQS && ABX500_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2f53081216a8..669ba7d85a36 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -87,8 +87,6 @@ obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
obj-$(CONFIG_ABX500_CORE) += abx500-core.o
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
-obj-$(CONFIG_AB5500_CORE) += ab5500-core.o
-obj-$(CONFIG_AB5500_DEBUG) += ab5500-debugfs.o
obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o
obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o
obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c
deleted file mode 100644
index 54d0fe40845f..000000000000
--- a/drivers/mfd/ab5500-core.c
+++ /dev/null
@@ -1,1439 +0,0 @@
-/*
- * Copyright (C) 2007-2011 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Low-level core for exclusive access to the AB5500 IC on the I2C bus
- * and some basic chip-configuration.
- * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
- * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
- * Author: Mattias Wallin <mattias.wallin@stericsson.com>
- * Author: Rickard Andersson <rickard.andersson@stericsson.com>
- * Author: Karl Komierowski <karl.komierowski@stericsson.com>
- * Author: Bibek Basu <bibek.basu@stericsson.com>
- *
- * TODO: Event handling with irq_chip. Waiting for PRCMU fw support.
- */
-
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/random.h>
-#include <linux/mfd/abx500.h>
-#include <linux/mfd/abx500/ab5500.h>
-#include <linux/list.h>
-#include <linux/bitops.h>
-#include <linux/spinlock.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/db5500-prcmu.h>
-
-#include "ab5500-core.h"
-#include "ab5500-debugfs.h"
-
-#define AB5500_NUM_EVENT_REG 23
-#define AB5500_IT_LATCH0_REG 0x40
-#define AB5500_IT_MASK0_REG 0x60
-
-/*
- * Permissible register ranges for reading and writing per device and bank.
- *
- * The ranges must be listed in increasing address order, and no overlaps are
- * allowed. It is assumed that write permission implies read permission
- * (i.e. only RO and RW permissions should be used). Ranges with write
- * permission must not be split up.
- */
-
-#define NO_RANGE {.count = 0, .range = NULL,}
-static struct ab5500_i2c_banks ab5500_bank_ranges[AB5500_NUM_DEVICES] = {
- [AB5500_DEVID_USB] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_USB,
- .nranges = 12,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x01,
- .last = 0x01,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x80,
- .last = 0x83,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x87,
- .last = 0x8A,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x8B,
- .last = 0x8B,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x91,
- .last = 0x92,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x93,
- .last = 0x93,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x94,
- .last = 0x94,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0xA8,
- .last = 0xB0,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0xB2,
- .last = 0xB2,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0xB4,
- .last = 0xBC,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0xBF,
- .last = 0xBF,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0xC1,
- .last = 0xC5,
- .perm = AB5500_PERM_RO,
- },
- },
- },
- },
- },
- [AB5500_DEVID_ADC] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_ADC,
- .nranges = 6,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x1F,
- .last = 0x22,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x23,
- .last = 0x24,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x26,
- .last = 0x2D,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x2F,
- .last = 0x34,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x37,
- .last = 0x57,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x58,
- .last = 0x58,
- .perm = AB5500_PERM_RO,
- },
- },
- },
- },
- },
- [AB5500_DEVID_LEDS] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_LED,
- .nranges = 1,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x0C,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_VIDEO] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_VDENC,
- .nranges = 12,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x08,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x09,
- .last = 0x09,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x0A,
- .last = 0x12,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x15,
- .last = 0x19,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x1B,
- .last = 0x21,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x27,
- .last = 0x2C,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x41,
- .last = 0x41,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x45,
- .last = 0x5B,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x5D,
- .last = 0x5D,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x69,
- .last = 0x69,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x6C,
- .last = 0x6D,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x80,
- .last = 0x81,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_REGULATORS] = {
- .nbanks = 2,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_STARTUP,
- .nranges = 12,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x01,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x1F,
- .last = 0x1F,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x2E,
- .last = 0x2E,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x2F,
- .last = 0x30,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x50,
- .last = 0x51,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x60,
- .last = 0x61,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x66,
- .last = 0x8A,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x8C,
- .last = 0x96,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xAA,
- .last = 0xB4,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xB7,
- .last = 0xBF,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xC1,
- .last = 0xCA,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xD3,
- .last = 0xE0,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- {
- .bankid = AB5500_BANK_SIM_USBSIM,
- .nranges = 1,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x13,
- .last = 0x19,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_SIM] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_SIM_USBSIM,
- .nranges = 1,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x13,
- .last = 0x19,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_RTC] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_RTC,
- .nranges = 2,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x04,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x06,
- .last = 0x0C,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_CHARGER] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_CHG,
- .nranges = 2,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x11,
- .last = 0x11,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x12,
- .last = 0x1B,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_FUELGAUGE] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_FG_BATTCOM_ACC,
- .nranges = 2,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x0B,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x0C,
- .last = 0x10,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_VIBRATOR] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_VIBRA,
- .nranges = 2,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x10,
- .last = 0x13,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xFE,
- .last = 0xFE,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_CODEC] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_AUDIO_HEADSETUSB,
- .nranges = 2,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x48,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xEB,
- .last = 0xFB,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_POWER] = {
- .nbanks = 2,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_STARTUP,
- .nranges = 1,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x30,
- .last = 0x30,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- {
- .bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
- .nranges = 1,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x01,
- .last = 0x01,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
-};
-
-#define AB5500_IRQ(bank, bit) ((bank) * 8 + (bit))
-
-/* I appologize for the resource names beeing a mix of upper case
- * and lower case but I want them to be exact as the documentation */
-static struct mfd_cell ab5500_devs[AB5500_NUM_DEVICES] = {
- [AB5500_DEVID_LEDS] = {
- .name = "ab5500-leds",
- .id = AB5500_DEVID_LEDS,
- },
- [AB5500_DEVID_POWER] = {
- .name = "ab5500-power",
- .id = AB5500_DEVID_POWER,
- },
- [AB5500_DEVID_REGULATORS] = {
- .name = "ab5500-regulator",
- .id = AB5500_DEVID_REGULATORS,
- },
- [AB5500_DEVID_SIM] = {
- .name = "ab5500-sim",
- .id = AB5500_DEVID_SIM,
- .num_resources = 1,
- .resources = (struct resource[]) {
- {
- .name = "SIMOFF",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(2, 0), /*rising*/
- .end = AB5500_IRQ(2, 1), /*falling*/
- },
- },
- },
- [AB5500_DEVID_RTC] = {
- .name = "ab5500-rtc",
- .id = AB5500_DEVID_RTC,
- .num_resources = 1,
- .resources = (struct resource[]) {
- {
- .name = "RTC_Alarm",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(1, 7),
- .end = AB5500_IRQ(1, 7),
- }
- },
- },
- [AB5500_DEVID_CHARGER] = {
- .name = "ab5500-charger",
- .id = AB5500_DEVID_CHARGER,
- },
- [AB5500_DEVID_ADC] = {
- .name = "ab5500-adc",
- .id = AB5500_DEVID_ADC,
- .num_resources = 10,
- .resources = (struct resource[]) {
- {
- .name = "TRIGGER-0",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 0),
- .end = AB5500_IRQ(0, 0),
- },
- {
- .name = "TRIGGER-1",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 1),
- .end = AB5500_IRQ(0, 1),
- },
- {
- .name = "TRIGGER-2",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 2),
- .end = AB5500_IRQ(0, 2),
- },
- {
- .name = "TRIGGER-3",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 3),
- .end = AB5500_IRQ(0, 3),
- },
- {
- .name = "TRIGGER-4",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 4),
- .end = AB5500_IRQ(0, 4),
- },
- {
- .name = "TRIGGER-5",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 5),
- .end = AB5500_IRQ(0, 5),
- },
- {
- .name = "TRIGGER-6",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 6),
- .end = AB5500_IRQ(0, 6),
- },
- {
- .name = "TRIGGER-7",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 7),
- .end = AB5500_IRQ(0, 7),
- },
- {
- .name = "TRIGGER-VBAT",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 8),
- .end = AB5500_IRQ(0, 8),
- },
- {
- .name = "TRIGGER-VBAT-TXON",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 9),
- .end = AB5500_IRQ(0, 9),
- },
- },
- },
- [AB5500_DEVID_FUELGAUGE] = {
- .name = "ab5500-fuelgauge",
- .id = AB5500_DEVID_FUELGAUGE,
- .num_resources = 6,
- .resources = (struct resource[]) {
- {
- .name = "Batt_attach",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(7, 5),
- .end = AB5500_IRQ(7, 5),
- },
- {
- .name = "Batt_removal",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(7, 6),
- .end = AB5500_IRQ(7, 6),
- },
- {
- .name = "UART_framing",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(7, 7),
- .end = AB5500_IRQ(7, 7),
- },
- {
- .name = "UART_overrun",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(8, 0),
- .end = AB5500_IRQ(8, 0),
- },
- {
- .name = "UART_Rdy_RX",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(8, 1),
- .end = AB5500_IRQ(8, 1),
- },
- {
- .name = "UART_Rdy_TX",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(8, 2),
- .end = AB5500_IRQ(8, 2),
- },
- },
- },
- [AB5500_DEVID_VIBRATOR] = {
- .name = "ab5500-vibrator",
- .id = AB5500_DEVID_VIBRATOR,
- },
- [AB5500_DEVID_CODEC] = {
- .name = "ab5500-codec",
- .id = AB5500_DEVID_CODEC,
- .num_resources = 3,
- .resources = (struct resource[]) {
- {
- .name = "audio_spkr1_ovc",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(9, 5),
- .end = AB5500_IRQ(9, 5),
- },
- {
- .name = "audio_plllocked",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(9, 6),
- .end = AB5500_IRQ(9, 6),
- },
- {
- .name = "audio_spkr2_ovc",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(17, 4),
- .end = AB5500_IRQ(17, 4),
- },
- },
- },
- [AB5500_DEVID_USB] = {
- .name = "ab5500-usb",
- .id = AB5500_DEVID_USB,
- .num_resources = 36,
- .resources = (struct resource[]) {
- {
- .name = "Link_Update",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(22, 1),
- .end = AB5500_IRQ(22, 1),
- },
- {
- .name = "DCIO",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(8, 3),
- .end = AB5500_IRQ(8, 4),
- },
- {
- .name = "VBUS_R",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(8, 5),
- .end = AB5500_IRQ(8, 5),
- },
- {
- .name = "VBUS_F",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(8, 6),
- .end = AB5500_IRQ(8, 6),
- },
- {
- .name = "CHGstate_10_PCVBUSchg",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(8, 7),
- .end = AB5500_IRQ(8, 7),
- },
- {
- .name = "DCIOreverse_ovc",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(9, 0),
- .end = AB5500_IRQ(9, 0),
- },
- {
- .name = "USBCharDetDone",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(9, 1),
- .end = AB5500_IRQ(9, 1),
- },
- {
- .name = "DCIO_no_limit",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(9, 2),
- .end = AB5500_IRQ(9, 2),
- },
- {
- .name = "USB_suspend",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(9, 3),
- .end = AB5500_IRQ(9, 3),
- },
- {
- .name = "DCIOreverse_fwdcurrent",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(9, 4),
- .end = AB5500_IRQ(9, 4),
- },
- {
- .name = "Vbus_Imeasmax_change",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(9, 5),
- .end = AB5500_IRQ(9, 6),
- },
- {
- .name = "OVV",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(14, 5),
- .end = AB5500_IRQ(14, 5),
- },
- {
- .name = "USBcharging_NOTok",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(15, 3),
- .end = AB5500_IRQ(15, 3),
- },
- {
- .name = "usb_adp_sensoroff",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(15, 6),
- .end = AB5500_IRQ(15, 6),
- },
- {
- .name = "usb_adp_probeplug",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(15, 7),
- .end = AB5500_IRQ(15, 7),
- },
- {
- .name = "usb_adp_sinkerror",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(16, 0),
- .end = AB5500_IRQ(16, 6),
- },
- {
- .name = "usb_adp_sourceerror",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(16, 1),
- .end = AB5500_IRQ(16, 1),
- },
- {
- .name = "usb_idgnd_r",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(16, 2),
- .end = AB5500_IRQ(16, 2),
- },
- {
- .name = "usb_idgnd_f",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(16, 3),
- .end = AB5500_IRQ(16, 3),
- },
- {
- .name = "usb_iddetR1",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(16, 4),
- .end = AB5500_IRQ(16, 5),
- },
- {
- .name = "usb_iddetR2",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(16, 6),
- .end = AB5500_IRQ(16, 7),
- },
- {
- .name = "usb_iddetR3",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(17, 0),
- .end = AB5500_IRQ(17, 1),
- },
- {
- .name = "usb_iddetR4",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(17, 2),
- .end = AB5500_IRQ(17, 3),
- },
- {
- .name = "CharTempWindowOk",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(17, 7),
- .end = AB5500_IRQ(18, 0),
- },
- {
- .name = "USB_SprDetect",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(18, 1),
- .end = AB5500_IRQ(18, 1),
- },
- {
- .name = "usb_adp_probe_unplug",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(18, 2),
- .end = AB5500_IRQ(18, 2),
- },
- {
- .name = "VBUSChDrop",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(18, 3),
- .end = AB5500_IRQ(18, 4),
- },
- {
- .name = "dcio_char_rec_done",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(18, 5),
- .end = AB5500_IRQ(18, 5),
- },
- {
- .name = "Charging_stopped_by_temp",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(18, 6),
- .end = AB5500_IRQ(18, 6),
- },
- {
- .name = "CHGstate_11_SafeModeVBUS",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(21, 1),
- .end = AB5500_IRQ(21, 2),
- },
- {
- .name = "CHGstate_12_comletedVBUS",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(21, 2),
- .end = AB5500_IRQ(21, 2),
- },
- {
- .name = "CHGstate_13_completedVBUS",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(21, 3),
- .end = AB5500_IRQ(21, 3),
- },
- {
- .name = "CHGstate_14_FullChgDCIO",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(21, 4),
- .end = AB5500_IRQ(21, 4),
- },
- {
- .name = "CHGstate_15_SafeModeDCIO",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(21, 5),
- .end = AB5500_IRQ(21, 5),
- },
- {
- .name = "CHGstate_16_OFFsuspendDCIO",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(21, 6),
- .end = AB5500_IRQ(21, 6),
- },
- {
- .name = "CHGstate_17_completedDCIO",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(21, 7),
- .end = AB5500_IRQ(21, 7),
- },
- },
- },
- [AB5500_DEVID_OTP] = {
- .name = "ab5500-otp",
- .id = AB5500_DEVID_OTP,
- },
- [AB5500_DEVID_VIDEO] = {
- .name = "ab5500-video",
- .id = AB5500_DEVID_VIDEO,
- .num_resources = 1,
- .resources = (struct resource[]) {
- {
- .name = "plugTVdet",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(22, 2),
- .end = AB5500_IRQ(22, 2),
- },
- },
- },
- [AB5500_DEVID_DBIECI] = {
- .name = "ab5500-dbieci",
- .id = AB5500_DEVID_DBIECI,
- .num_resources = 10,
- .resources = (struct resource[]) {
- {
- .name = "COLL",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(14, 0),
- .end = AB5500_IRQ(14, 0),
- },
- {
- .name = "RESERR",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(14, 1),
- .end = AB5500_IRQ(14, 1),
- },
- {
- .name = "FRAERR",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(14, 2),
- .end = AB5500_IRQ(14, 2),
- },
- {
- .name = "COMERR",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(14, 3),
- .end = AB5500_IRQ(14, 3),
- },
- {
- .name = "BSI_indicator",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(14, 4),
- .end = AB5500_IRQ(14, 4),
- },
- {
- .name = "SPDSET",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(14, 6),
- .end = AB5500_IRQ(14, 6),
- },
- {
- .name = "DSENT",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(14, 7),
- .end = AB5500_IRQ(14, 7),
- },
- {
- .name = "DREC",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(15, 0),
- .end = AB5500_IRQ(15, 0),
- },
- {
- .name = "ACCINT",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(15, 1),
- .end = AB5500_IRQ(15, 1),
- },
- {
- .name = "NOPINT",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(15, 2),
- .end = AB5500_IRQ(15, 2),
- },
- },
- },
- [AB5500_DEVID_ONSWA] = {
- .name = "ab5500-onswa",
- .id = AB5500_DEVID_ONSWA,
- .num_resources = 2,
- .resources = (struct resource[]) {
- {
- .name = "ONSWAn_rising",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(1, 3),
- .end = AB5500_IRQ(1, 3),
- },
- {
- .name = "ONSWAn_falling",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(1, 4),
- .end = AB5500_IRQ(1, 4),
- },
- },
- },
-};
-
-/*
- * Functionality for getting/setting register values.
- */
-int ab5500_get_register_interruptible_raw(struct ab5500 *ab,
- u8 bank, u8 reg,
- u8 *value)
-{
- int err;
-
- if (bank >= AB5500_NUM_BANKS)
- return -EINVAL;
-
- err = mutex_lock_interruptible(&ab->access_mutex);
- if (err)
- return err;
- err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, reg, value, 1);
-
- mutex_unlock(&ab->access_mutex);
- return err;
-}
-
-static int get_register_page_interruptible(struct ab5500 *ab, u8 bank,
- u8 first_reg, u8 *regvals, u8 numregs)
-{
- int err;
-
- if (bank >= AB5500_NUM_BANKS)
- return -EINVAL;
-
- err = mutex_lock_interruptible(&ab->access_mutex);
- if (err)
- return err;
-
- while (numregs) {
- /* The hardware limit for get page is 4 */
- u8 curnum = min_t(u8, numregs, 4u);
-
- err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
- first_reg, regvals, curnum);
- if (err)
- goto out;
-
- numregs -= curnum;
- first_reg += curnum;
- regvals += curnum;
- }
-
-out:
- mutex_unlock(&ab->access_mutex);
- return err;
-}
-
-int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
- u8 reg, u8 bitmask, u8 bitvalues)
-{
- int err = 0;
-
- if (bank >= AB5500_NUM_BANKS)
- return -EINVAL;
-
- if (bitmask) {
- u8 buf;
-
- err = mutex_lock_interruptible(&ab->access_mutex);
- if (err)
- return err;
-
- if (bitmask == 0xFF) /* No need to read in this case. */
- buf = bitvalues;
- else { /* Read and modify the register value. */
- err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
- reg, &buf, 1);
- if (err)
- return err;
-
- buf = ((~bitmask & buf) | (bitmask & bitvalues));
- }
- /* Write the new value. */
- err = db5500_prcmu_abb_write(bankinfo[bank].slave_addr, reg,
- &buf, 1);
-
- mutex_unlock(&ab->access_mutex);
- }
- return err;
-}
-
-static int
-set_register_interruptible(struct ab5500 *ab, u8 bank, u8 reg, u8 value)
-{
- return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg,
- 0xff, value);
-}
-
-/*
- * Read/write permission checking functions.
- */
-static const struct ab5500_i2c_ranges *get_bankref(u8 devid, u8 bank)
-{
- u8 i;
-
- if (devid < AB5500_NUM_DEVICES) {
- for (i = 0; i < ab5500_bank_ranges[devid].nbanks; i++) {
- if (ab5500_bank_ranges[devid].bank[i].bankid == bank)
- return &ab5500_bank_ranges[devid].bank[i];
- }
- }
- return NULL;
-}
-
-static bool page_write_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
-{
- u8 i; /* range loop index */
- const struct ab5500_i2c_ranges *bankref;
-
- bankref = get_bankref(devid, bank);
- if (bankref == NULL || last_reg < first_reg)
- return false;
-
- for (i = 0; i < bankref->nranges; i++) {
- if (first_reg < bankref->range[i].first)
- break;
- if ((last_reg <= bankref->range[i].last) &&
- (bankref->range[i].perm & AB5500_PERM_WR))
- return true;
- }
- return false;
-}
-
-static bool reg_write_allowed(u8 devid, u8 bank, u8 reg)
-{
- return page_write_allowed(devid, bank, reg, reg);
-}
-
-static bool page_read_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
-{
- u8 i;
- const struct ab5500_i2c_ranges *bankref;
-
- bankref = get_bankref(devid, bank);
- if (bankref == NULL || last_reg < first_reg)
- return false;
-
-
- /* Find the range (if it exists in the list) that includes first_reg. */
- for (i = 0; i < bankref->nranges; i++) {
- if (first_reg < bankref->range[i].first)
- return false;
- if (first_reg <= bankref->range[i].last)
- break;
- }
- /* Make sure that the entire range up to and including last_reg is
- * readable. This may span several of the ranges in the list.
- */
- while ((i < bankref->nranges) &&
- (bankref->range[i].perm & AB5500_PERM_RD)) {
- if (last_reg <= bankref->range[i].last)
- return true;
- if ((++i >= bankref->nranges) ||
- (bankref->range[i].first !=
- (bankref->range[i - 1].last + 1))) {
- break;
- }
- }
- return false;
-}
-
-static bool reg_read_allowed(u8 devid, u8 bank, u8 reg)
-{
- return page_read_allowed(devid, bank, reg, reg);
-}
-
-
-/*
- * The exported register access functionality.
- */
-static int ab5500_get_chip_id(struct device *dev)
-{
- struct ab5500 *ab = dev_get_drvdata(dev->parent);
-
- return (int)ab->chip_id;
-}
-
-static int ab5500_mask_and_set_register_interruptible(struct device *dev,
- u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
-{
- struct ab5500 *ab;
- struct platform_device *pdev = to_platform_device(dev);
-
- if ((AB5500_NUM_BANKS <= bank) ||
- !reg_write_allowed(pdev->id, bank, reg))
- return -EINVAL;
-
- ab = dev_get_drvdata(dev->parent);
- return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg,
- bitmask, bitvalues);
-}
-
-static int ab5500_set_register_interruptible(struct device *dev, u8 bank,
- u8 reg, u8 value)
-{
- return ab5500_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
- value);
-}
-
-static int ab5500_get_register_interruptible(struct device *dev, u8 bank,
- u8 reg, u8 *value)
-{
- struct ab5500 *ab;
- struct platform_device *pdev = to_platform_device(dev);
-
- if ((AB5500_NUM_BANKS <= bank) ||
-