Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "The first round of updates for the input subsystem.

  A few new drivers (power button handler for AXP20x PMIC, tps65218
  power button driver, sun4i keys driver, regulator haptic driver, NI
  Ettus Research USRP E3x0 button, Alwinner A10/A20 PS/2 controller).

  Updates to Synaptics and ALPS touchpad drivers (with more to come
  later), brand new Focaltech PS/2 support, update to Cypress driver to
  handle Gen5 (in addition to Gen3) devices, and number of other fixups
  to various drivers as well as input core"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
  Input: elan_i2c - fix wrong %p extension
  Input: evdev - do not queue SYN_DROPPED if queue is empty
  Input: gscps2 - fix MODULE_DEVICE_TABLE invocation
  Input: synaptics - use dmax in input_mt_assign_slots
  Input: pxa27x_keypad - remove unnecessary ARM includes
  Input: ti_am335x_tsc - replace delta filtering with median filtering
  ARM: dts: AM335x: Make charge delay a DT parameter for TSC
  Input: ti_am335x_tsc - read charge delay from DT
  Input: ti_am335x_tsc - remove udelay in interrupt handler
  Input: ti_am335x_tsc - interchange touchscreen and ADC steps
  Input: MT - add support for balanced slot assignment
  Input: drv2667 - remove wrong and unneeded drv2667-haptics modalias
  Input: drv260x - remove wrong and unneeded drv260x-haptics modalias
  Input: cap11xx - remove wrong and unneeded cap11xx modalias
  Input: sun4i-ts - add support for touchpanel controller on A31
  Input: serio - add support for Alwinner A10/A20 PS/2 controller
  Input: gtco - use sign_extend32() for sign extension
  Input: elan_i2c - verify firmware signature applying it
  Input: elantech - remove stale comment from Kconfig
  Input: cyapa - off by one in cyapa_update_fw_store()
  ...

61 files changed, 7957 insertions, 1302 deletions

diff --git a/Documentation/ABI/testing/sysfs-driver-input-axp-pek b/Documentation/ABI/testing/sysfs-driver-input-axp-pek
new file mode 100644
index 000000000000..a5e671b9fa79
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-input-axp-pek
@@ -0,0 +1,11 @@
+What:		/sys/class/input/input(x)/device/startup
+Date:		March 2014
+Contact:	Carlo Caione <carlo@caione.org>
+Description:	Startup time in us. Board is powered on if the button is pressed
+		for more than <startup_time>
+
+What:		/sys/class/input/input(x)/device/shutdown
+Date:		March 2014
+Contact:	Carlo Caione <carlo@caione.org>
+Description:	Shutdown time in us. Board is powered off if the button is pressed
+		for more than <shutdown_time>
diff --git a/Documentation/devicetree/bindings/input/e3x0-button.txt b/Documentation/devicetree/bindings/input/e3x0-button.txt
new file mode 100644
index 000000000000..751665e8e47a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/e3x0-button.txt
@@ -0,0 +1,25 @@
+National Instruments Ettus Research USRP E3x0 button driver
+
+This module is part of the NI Ettus Research USRP E3x0 SDR.
+
+This module provides a simple power button event via two interrupts.
+
+Required properties:
+- compatible: should be one of the following
+  - "ettus,e3x0-button": For devices such as the NI Ettus Research USRP E3x0
+- interrupt-parent:
+  - a phandle to the interrupt controller that it is attached to.
+- interrupts: should be one of the following
+  - <0 30 1>, <0 31 1>: For devices such as the NI Ettus Research USRP E3x0
+- interrupt-names: should be one of the following
+  - "press", "release": For devices such as the NI Ettus Research USRP E3x0
+
+Note: Interrupt numbers might vary depending on the FPGA configuration.
+
+Example:
+	button {
+		compatible = "ettus,e3x0-button";
+		interrupt-parent = <&intc>;
+		interrupts = <0 30 1>, <0 31 1>;
+		interrupt-names = "press", "release";
+	}
diff --git a/Documentation/devicetree/bindings/input/regulator-haptic.txt b/Documentation/devicetree/bindings/input/regulator-haptic.txt
new file mode 100644
index 000000000000..3ed1c7eb2f97
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/regulator-haptic.txt
@@ -0,0 +1,21 @@
+* Regulator Haptic Device Tree Bindings
+
+Required Properties:
+ - compatible : Should be "regulator-haptic"
+ - haptic-supply : Power supply to the haptic motor.
+	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+ - max-microvolt : The maximum voltage value supplied to the haptic motor.
+		[The unit of the voltage is a micro]
+
+ - min-microvolt : The minimum voltage value supplied to the haptic motor.
+		[The unit of the voltage is a micro]
+
+Example:
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&motor_regulator>;
+		max-microvolt = <2700000>;
+		min-microvolt = <1100000>;
+	};
diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
new file mode 100644
index 000000000000..b9c32f6fd687
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
@@ -0,0 +1,62 @@
+Allwinner sun4i low res adc attached tablet keys
+------------------------------------------------
+
+Required properties:
+ - compatible: "allwinner,sun4i-a10-lradc-keys"
+ - reg: mmio address range of the chip
+ - interrupts: interrupt to which the chip is connected
+ - vref-supply: powersupply for the lradc reference voltage
+
+Each key is represented as a sub-node of "allwinner,sun4i-a10-lradc-keys":
+
+Required subnode-properties:
+	- label: Descriptive name of the key.
+	- linux,code: Keycode to emit.
+	- channel: Channel this key is attached to, mut be 0 or 1.
+	- voltage: Voltage in µV at lradc input when this key is pressed.
+
+Example:
+
+#include <dt-bindings/input/input.h>
+
+	lradc: lradc@01c22800 {
+		compatible = "allwinner,sun4i-a10-lradc-keys";
+		reg = <0x01c22800 0x100>;
+		interrupts = <31>;
+		vref-supply = <&reg_vcc3v0>;
+
+		button@191 {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			channel = <0>;
+			voltage = <191274>;
+		};
+
+		button@392 {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			channel = <0>;
+			voltage = <392644>;
+		};
+
+		button@601 {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			channel = <0>;
+			voltage = <601151>;
+		};
+
+		button@795 {
+			label = "Enter";
+			linux,code = <KEY_ENTER>;
+			channel = <0>;
+			voltage = <795090>;
+		};
+
+		button@987 {
+			label = "Home";
+			linux,code = <KEY_HOMEPAGE>;
+			channel = <0>;
+			voltage = <987387>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
index aef57791f40b..433332d3b2ba 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
@@ -2,9 +2,10 @@ sun4i resistive touchscreen controller
 --------------------------------------
 
 Required properties:
- - compatible: "allwinner,sun4i-a10-ts"
+ - compatible: "allwinner,sun4i-a10-ts" or "allwinner,sun6i-a31-ts"
  - reg: mmio address range of the chip
  - interrupts: interrupt to which the chip is connected
+ - #thermal-sensor-cells: shall be 0
 
 Optional properties:
  - allwinner,ts-attached: boolean indicating that an actual touchscreen is
@@ -17,4 +18,5 @@ Example:
 		reg = <0x01c25000 0x100>;
 		interrupts = <29>;
 		allwinner,ts-attached;
+		#thermal-sensor-cells = <0>;
 	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
index 878549ba814d..6c4fb34823d3 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
@@ -28,6 +28,20 @@ Required properties:
 	ti,adc-channels: List of analog inputs available for ADC.
 			 AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
 
+Optional properties:
+- child "tsc"
+	ti,charge-delay: Length of touch screen charge delay step in terms of
+			 ADC clock cycles. Charge delay value should be large
+			 in order to avoid false pen-up events. This value
+			 effects the overall sampling speed, hence need to be
+			 kept as low as possible, while avoiding false pen-up
+			 event. Start from a lower value, say 0x400, and
+			 increase value until false pen-up events are avoided.
+			 The pen-up detection happens immediately after the
+			 charge step, so this does in fact function as a
+			 hardware knob for adjusting the amount of "settling
+			 time".
+
 Example:
 	tscadc: tscadc@44e0d000 {
 		compatible = "ti,am3359-tscadc";
@@ -36,6 +50,7 @@ Example:
 			ti,x-plate-resistance = <200>;
 			ti,coordiante-readouts = <5>;
 			ti,wire-config = <0x00 0x11 0x22 0x33>;
+			ti,charge-delay = <0x400>;
 		};
 
 		adc {
diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
new file mode 100644
index 000000000000..e30e0b93f2b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
@@ -0,0 +1,17 @@
+Texas Instruments TPS65218 power button
+
+This driver provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be "ti,tps65218-pwrbutton"
+- interrupts: should be one of the following
+   - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218
+
+Example:
+
+&tps {
+	power-button {
+		compatible = "ti,tps65218-pwrbutton";
+		interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt
new file mode 100644
index 000000000000..362a76925bcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt
@@ -0,0 +1,23 @@
+* Device tree bindings for Allwinner A10, A20 PS2 host controller
+
+A20 PS2 is dual role controller (PS2 host and PS2 device). These bindings are
+for PS2 A10/A20 host controller. IBM compliant IBM PS2 and AT-compatible keyboard
+and mouse can be connected.
+
+Required properties:
+
+ - reg             : Offset and length of the register set for the device.
+ - compatible      : Should be as of the following:
+                     - "allwinner,sun4i-a10-ps2"
+ - interrupts      : The interrupt line connected to the PS2.
+ - clocks          : The gate clk connected to the PS2.
+
+
+Example:
+	ps20: ps2@0x01c2a000 {
+		compatible = "allwinner,sun4i-a10-ps2";
+		reg = <0x01c2a000 0x400>;
+		interrupts = <0 62 4>;
+		clocks = <&apb1_gates 6>;
+		status = "disabled";
+	};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index d443279c95dc..96a17541391e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -54,6 +54,7 @@ epcos	EPCOS AG
 epfl	Ecole Polytechnique Fédérale de Lausanne
 epson	Seiko Epson Corp.
 est	ESTeem Wireless Modems
+ettus	NI Ettus Research
 eukrea  Eukréa Electromatique
 everest	Everest Semiconductor Co. Ltd.
 excito	Excito
diff --git a/MAINTAINERS b/MAINTAINERS
index 249498844a43..9c632548d3bd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3479,6 +3479,14 @@ M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/tty/serial/dz.*
 
+E3X0 POWER BUTTON DRIVER
+M:	Moritz Fischer <moritz.fischer@ettus.com>
+L:	usrp-users@lists.ettus.com
+W:	http://www.ettus.com
+S:	Supported
+F:	drivers/input/misc/e3x0-button.c
+F:	Documentation/devicetree/bindings/input/e3x0-button.txt
+
 E4000 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
@@ -9281,6 +9289,13 @@ F:	arch/m68k/sun3*/
 F:	arch/m68k/include/asm/sun3*
 F:	drivers/net/ethernet/i825xx/sun3*
 
+SUN4I LOW RES ADC ATTACHED TABLET KEYS DRIVER
+M:	Hans de Goede <hdegoede@redhat.com>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
+F:	drivers/input/keyboard/sun4i-lradc-keys.c
+
 SUNDANCE NETWORK DRIVER
 M:	Denis Kirjanov <kda@linux-powerpc.org>
 L:	netdev@vger.kernel.org
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 54f118c08db8..66342515df20 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -648,6 +648,7 @@
 		ti,x-plate-resistance = <200>;
 		ti,coordinate-readouts = <5>;
 		ti,wire-config = <0x00 0x11 0x22 0x33>;
+		ti,charge-delay = <0x400>;
 	};
 
 	adc {
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index b730864731e8..adba23246474 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -86,19 +86,18 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
 	unsigned int stepconfig;
-	int i, steps;
+	int i, steps = 0;
 
 	/*
 	 * There are 16 configurable steps and 8 analog input
 	 * lines available which are shared between Touchscreen and ADC.
 	 *
-	 * Steps backwards i.e. from 16 towards 0 are used by ADC
+	 * Steps forwards i.e. from 0 towards 16 are used by ADC
 	 * depending on number of input lines needed.
 	 * Channel would represent which analog input
 	 * needs to be given to ADC to digitalize data.
 	 */
 
-	steps = TOTAL_STEPS - adc_dev->channels;
 	if (iio_buffer_enabled(indio_dev))
 		stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1
 					| STEPCONFIG_MODE_SWCNT;
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 18d4b2c8fe55..a18f41b89b6a 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -62,26 +62,6 @@ struct evdev_client {
 	struct input_event buffer[];
 };
 
-static int evdev_set_clk_type(struct evdev_client *client, unsigned int clkid)
-{
-	switch (clkid) {
-
-	case CLOCK_REALTIME:
-		client->clk_type = EV_CLK_REAL;
-		break;
-	case CLOCK_MONOTONIC:
-		client->clk_type = EV_CLK_MONO;
-		break;
-	case CLOCK_BOOTTIME:
-		client->clk_type = EV_CLK_BOOT;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 /* flush queued events of type @type, caller must hold client->buffer_lock */
 static void __evdev_flush_queue(struct evdev_client *client, unsigned int type)
 {
@@ -128,10 +108,8 @@ static void __evdev_flush_queue(struct evdev_client *client, unsigned int type)
 	client->head = head;
 }
 
-/* queue SYN_DROPPED event */
-static void evdev_queue_syn_dropped(struct evdev_client *client)
+static void __evdev_queue_syn_dropped(struct evdev_client *client)
 {
-	unsigned long flags;
 	struct input_event ev;
 	ktime_t time;
 
@@ -146,8 +124,6 @@ static void evdev_queue_syn_dropped(struct evdev_client *client)
 	ev.code = SYN_DROPPED;
 	ev.value = 0;
 
-	spin_lock_irqsave(&client->buffer_lock, flags);
-
 	client->buffer[client->head++] = ev;
 	client->head &= client->bufsize - 1;
 
@@ -156,8 +132,53 @@ static void evdev_queue_syn_dropped(struct evdev_client *client)
 		client->tail = (client->head - 1) & (client->bufsize - 1);
 		client->packet_head = client->tail;
 	}
+}
+
+static void evdev_queue_syn_dropped(struct evdev_client *client)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&client->buffer_lock, flags);
+	__evdev_queue_syn_dropped(client);
+	spin_unlock_irqrestore(&client->buffer_lock, flags);
+}
+
+static int evdev_set_clk_type(struct evdev_client *client, unsigned int clkid)
+{
+	unsigned long flags;
+
+	if (client->clk_type == clkid)
+		return 0;
+
+	switch (clkid) {
+
+	case CLOCK_REALTIME:
+		client->clk_type = EV_CLK_REAL;
+		break;
+	case CLOCK_MONOTONIC:
+		client->clk_type = EV_CLK_MONO;
+		break;
+	case CLOCK_BOOTTIME:
+		client->clk_type = EV_CLK_BOOT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Flush pending events and queue SYN_DROPPED event,
+	 * but only if the queue is not empty.
+	 */
+	spin_lock_irqsave(&client->buffer_lock, flags);
+
+	if (client->head != client->tail) {
+		client->packet_head = client->head = client->tail;
+		__evdev_queue_syn_dropped(client);
+	}
 
 	spin_unlock_irqrestore(&client->buffer_lock, flags);
+
+	return 0;
 }
 
 static void __pass_event(struct evdev_client *client,
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index fbe29fcb15c5..cb150a1dbaff 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -293,7 +293,7 @@ void input_mt_sync_frame(struct input_dev *dev)
 }
 EXPORT_SYMBOL(input_mt_sync_frame);
 
-static int adjust_dual(int *begin, int step, int *end, int eq)
+static int adjust_dual(int *begin, int step, int *end, int eq, int mu)
 {
 	int f, *p, s, c;
 
@@ -311,9 +311,10 @@ static int adjust_dual(int *begin, int step, int *end, int eq)
 			s = *p;
 
 	c = (f + s + 1) / 2;
-	if (c == 0 || (c > 0 && !eq))
+	if (c == 0 || (c > mu && (!eq || mu > 0)))
 		return 0;
-	if (s < 0)
+	/* Improve convergence for positive matrices by penalizing overcovers */
+	if (s < 0 && mu <= 0)
 		c *= 2;
 
 	for (p = begin; p != end; p += step)
@@ -322,23 +323,24 @@ static int adjust_dual(int *begin, int step, int *end, int eq)
 	return (c < s && s <= 0) || (f >= 0 && f < c);
 }
 
-static void find_reduced_matrix(int *w, int nr, int nc, int nrc)
+static void find_reduced_matrix(int *w, int nr, int nc, int nrc, int mu)
 {
 	int i, k, sum;
 
 	for (k = 0; k < nrc; k++) {
 		for (i = 0; i < nr; i++)
-			adjust_dual(w + i, nr, w + i + nrc, nr <= nc);
+			adjust_dual(w + i, nr, w + i + nrc, nr <= nc, mu);
 		sum = 0;
 		for (i = 0; i < nrc; i += nr)
-			sum += adjust_dual(w + i, 1, w + i + nr, nc <= nr);
+			sum += adjust_dual(w + i, 1, w + i + nr, nc <= nr, mu);
 		if (!sum)
 			break;
 	}
 }
 
 static int input_mt_set_matrix(struct input_mt *mt,
-			       const struct input_mt_pos *pos, int num_pos)
+			       const struct input_mt_pos *pos, int num_pos,
+			       int mu)
 {
 	const struct input_mt_pos *p;
 	struct input_mt_slot *s;
@@ -352,7 +354,7 @@ static int input_mt_set_matrix(struct input_mt *mt,
 		y = input_mt_get_value(s, ABS_MT_POSITION_Y);
 		for (p = pos; p != pos + num_pos; p++) {
 			int dx = x - p->x, dy = y - p->y;
-			*w++ = dx * dx + dy * dy;
+			*w++ = dx * dx + dy * dy - mu;
 		}
 	}
 
@@ -393,17 +395,24 @@ static void input_mt_set_slots(struct input_mt *mt,
  * @slots: the slot assignment to be filled
  * @pos: the position array to match
  * @num_pos: number of positions
+ * @dmax: maximum ABS_MT_POSITION displacement (zero for infinite)
  *
  * Performs a best match against the current contacts and returns
  * the slot assignment list. New contacts are assigned to unused
  * slots.
  *
+ * The assignments are balanced so that all coordinate displacements are
+ * below the euclidian distance dmax. If no such assignment can be found,
+ * some contacts are assigned to unused slots.
+ *
  * Returns zero on success, or negative error in case of failure.
  */
 int input_mt_assign_slots(struct input_dev *dev, int *slots,
-			  const struct input_mt_pos *pos, int num_pos)
+			  const struct input_mt_pos *pos, int num_pos,
+			  int dmax)
 {
 	struct input_mt *mt = dev->mt;
+	int mu = 2 * dmax * dmax;
 	int nrc;
 
 	if (!mt || !mt->red)
@@ -413,8 +422,8 @@ int input_mt_assign_slots(struct input_dev *dev, int *slots,
 	if (num_pos < 1)
 		return 0;
 
-	nrc = input_mt_set_matrix(mt, pos, num_pos);
-	find_reduced_matrix(mt->red, num_pos, nrc / num_pos, nrc);
+	nrc = input_mt_set_matrix(mt, pos, num_pos, mu);
+	find_reduced_matrix(mt->red, num_pos, nrc / num_pos, nrc, mu);
 	input_mt_set_slots(mt, slots, num_pos);
 
 	return 0;
diff --git a/drivers/input/input.c b/drivers/input/input.c