diff options
author | James Bottomley <James.Bottomley@HansenPartnership.com> | 2016-01-13 16:29:30 -0800 |
---|---|---|
committer | James Bottomley <James.Bottomley@HansenPartnership.com> | 2016-01-13 16:29:30 -0800 |
commit | 60539fa3a1e3caf458a943b1a14154e3fa44d0d1 (patch) | |
tree | 9bca5f667844338ed877cb8b1684c9f661a003c3 | |
parent | abaee091a18c19ccd86feb1c8374585d82e96777 (diff) | |
parent | a290dd57926cb0c54eec7ea506885119e296b755 (diff) |
Merge remote-tracking branch 'mkp-scsi/4.5/scsi-queue' into misc
-rw-r--r-- | drivers/scsi/3w-xxxx.c | 3 | ||||
-rw-r--r-- | drivers/scsi/Kconfig | 17 | ||||
-rw-r--r-- | drivers/scsi/NCR5380.c | 2868 | ||||
-rw-r--r-- | drivers/scsi/NCR5380.h | 87 | ||||
-rw-r--r-- | drivers/scsi/arm/cumana_1.c | 31 | ||||
-rw-r--r-- | drivers/scsi/arm/oak.c | 27 | ||||
-rw-r--r-- | drivers/scsi/atari_NCR5380.c | 2266 | ||||
-rw-r--r-- | drivers/scsi/atari_scsi.c | 102 | ||||
-rw-r--r-- | drivers/scsi/cxgbi/cxgb3i/cxgb3i.c | 2 | ||||
-rw-r--r-- | drivers/scsi/dmx3191d.c | 33 | ||||
-rw-r--r-- | drivers/scsi/dtc.c | 115 | ||||
-rw-r--r-- | drivers/scsi/dtc.h | 45 | ||||
-rw-r--r-- | drivers/scsi/g_NCR5380.c | 408 | ||||
-rw-r--r-- | drivers/scsi/g_NCR5380.h | 66 | ||||
-rw-r--r-- | drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 40 | ||||
-rw-r--r-- | drivers/scsi/imm.c | 50 | ||||
-rw-r--r-- | drivers/scsi/ipr.c | 5 | ||||
-rw-r--r-- | drivers/scsi/mac_scsi.c | 117 | ||||
-rw-r--r-- | drivers/scsi/megaraid/megaraid_mm.c | 4 | ||||
-rw-r--r-- | drivers/scsi/pas16.c | 116 | ||||
-rw-r--r-- | drivers/scsi/pas16.h | 40 | ||||
-rw-r--r-- | drivers/scsi/scsi_devinfo.c | 1 | ||||
-rw-r--r-- | drivers/scsi/storvsc_drv.c | 2 | ||||
-rw-r--r-- | drivers/scsi/sun3_scsi.c | 141 | ||||
-rw-r--r-- | drivers/scsi/t128.c | 102 | ||||
-rw-r--r-- | drivers/scsi/t128.h | 39 |
26 files changed, 3009 insertions, 3718 deletions
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c index 2940bd769936..25aba1613e21 100644 --- a/drivers/scsi/3w-xxxx.c +++ b/drivers/scsi/3w-xxxx.c @@ -1045,6 +1045,9 @@ static int tw_chrdev_open(struct inode *inode, struct file *file) static const struct file_operations tw_fops = { .owner = THIS_MODULE, .unlocked_ioctl = tw_chrdev_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = tw_chrdev_ioctl, +#endif .open = tw_chrdev_open, .release = NULL, .llseek = noop_llseek, diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index c1fe0d2f90ca..23d862dfdde3 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1620,23 +1620,6 @@ config ATARI_SCSI ST-DMA, replacing ACSI). It does NOT support other schemes, like in the Hades (without DMA). -config ATARI_SCSI_TOSHIBA_DELAY - bool "Long delays for Toshiba CD-ROMs" - depends on ATARI_SCSI - help - This option increases the delay after a SCSI arbitration to - accommodate some flaky Toshiba CD-ROM drives. Say Y if you intend to - use a Toshiba CD-ROM drive; otherwise, the option is not needed and - would impact performance a bit, so say N. - -config ATARI_SCSI_RESET_BOOT - bool "Reset SCSI-devices at boottime" - depends on ATARI_SCSI - help - Reset the devices on your Atari whenever it boots. This makes the - boot process fractionally longer but may assist recovery from errors - that leave the devices with SCSI operations partway completed. - config MAC_SCSI tristate "Macintosh NCR5380 SCSI" depends on MAC && SCSI=y diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index a777e5c412df..d72867257346 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -1,17 +1,17 @@ -/* +/* * NCR 5380 generic driver routines. These should make it *trivial* - * to implement 5380 SCSI drivers under Linux with a non-trantor - * architecture. + * to implement 5380 SCSI drivers under Linux with a non-trantor + * architecture. * - * Note that these routines also work with NR53c400 family chips. + * Note that these routines also work with NR53c400 family chips. * * Copyright 1993, Drew Eckhardt - * Visionary Computing - * (Unix and Linux consulting and custom programming) - * drew@colorado.edu - * +1 (303) 666-5836 + * Visionary Computing + * (Unix and Linux consulting and custom programming) + * drew@colorado.edu + * +1 (303) 666-5836 * - * For more information, please consult + * For more information, please consult * * NCR 5380 Family * SCSI Protocol Controller @@ -25,84 +25,28 @@ */ /* - * Revision 1.10 1998/9/2 Alan Cox - * (alan@lxorguk.ukuu.org.uk) - * Fixed up the timer lockups reported so far. Things still suck. Looking - * forward to 2.3 and per device request queues. Then it'll be possible to - * SMP thread this beast and improve life no end. - - * Revision 1.9 1997/7/27 Ronald van Cuijlenborg - * (ronald.van.cuijlenborg@tip.nl or nutty@dds.nl) - * (hopefully) fixed and enhanced USLEEP - * added support for DTC3181E card (for Mustek scanner) - * - - * Revision 1.8 Ingmar Baumgart - * (ingmar@gonzo.schwaben.de) - * added support for NCR53C400a card - * - - * Revision 1.7 1996/3/2 Ray Van Tassle (rayvt@comm.mot.com) - * added proc_info - * added support needed for DTC 3180/3280 - * fixed a couple of bugs - * - - * Revision 1.5 1994/01/19 09:14:57 drew - * Fixed udelay() hack that was being used on DATAOUT phases - * instead of a proper wait for the final handshake. - * - * Revision 1.4 1994/01/19 06:44:25 drew - * *** empty log message *** - * - * Revision 1.3 1994/01/19 05:24:40 drew - * Added support for TCR LAST_BYTE_SENT bit. - * - * Revision 1.2 1994/01/15 06:14:11 drew - * REAL DMA support, bug fixes. - * - * Revision 1.1 1994/01/15 06:00:54 drew - * Initial revision - * + * With contributions from Ray Van Tassle, Ingmar Baumgart, + * Ronald van Cuijlenborg, Alan Cox and others. */ /* - * Further development / testing that should be done : + * Further development / testing that should be done : * 1. Cleanup the NCR5380_transfer_dma function and DMA operation complete - * code so that everything does the same thing that's done at the - * end of a pseudo-DMA read operation. + * code so that everything does the same thing that's done at the + * end of a pseudo-DMA read operation. * * 2. Fix REAL_DMA (interrupt driven, polled works fine) - - * basically, transfer size needs to be reduced by one - * and the last byte read as is done with PSEUDO_DMA. - * - * 4. Test SCSI-II tagged queueing (I have no devices which support - * tagged queueing) - * - * 5. Test linked command handling code after Eric is ready with - * the high level code. + * basically, transfer size needs to be reduced by one + * and the last byte read as is done with PSEUDO_DMA. + * + * 4. Test SCSI-II tagged queueing (I have no devices which support + * tagged queueing) */ -#include <scsi/scsi_dbg.h> -#include <scsi/scsi_transport_spi.h> - -#if (NDEBUG & NDEBUG_LISTS) -#define LIST(x,y) {printk("LINE:%d Adding %p to %p\n", __LINE__, (void*)(x), (void*)(y)); if ((x)==(y)) udelay(5); } -#define REMOVE(w,x,y,z) {printk("LINE:%d Removing: %p->%p %p->%p \n", __LINE__, (void*)(w), (void*)(x), (void*)(y), (void*)(z)); if ((x)==(y)) udelay(5); } -#else -#define LIST(x,y) -#define REMOVE(w,x,y,z) -#endif #ifndef notyet -#undef LINKED #undef REAL_DMA #endif -#ifdef REAL_DMA_POLL -#undef READ_OVERRUNS -#define READ_OVERRUNS -#endif - #ifdef BOARD_REQUIRES_NO_DELAY #define io_recovery_delay(x) #else @@ -112,44 +56,28 @@ /* * Design * - * This is a generic 5380 driver. To use it on a different platform, + * This is a generic 5380 driver. To use it on a different platform, * one simply writes appropriate system specific macros (ie, data - * transfer - some PC's will use the I/O bus, 68K's must use + * transfer - some PC's will use the I/O bus, 68K's must use * memory mapped) and drops this file in their 'C' wrapper. * - * (Note from hch: unfortunately it was not enough for the different - * m68k folks and instead of improving this driver they copied it - * and hacked it up for their needs. As a consequence they lost - * most updates to this driver. Maybe someone will fix all these - * drivers to use a common core one day..) - * - * As far as command queueing, two queues are maintained for + * As far as command queueing, two queues are maintained for * each 5380 in the system - commands that haven't been issued yet, - * and commands that are currently executing. This means that an - * unlimited number of commands may be queued, letting - * more commands propagate from the higher driver levels giving higher - * throughput. Note that both I_T_L and I_T_L_Q nexuses are supported, - * allowing multiple commands to propagate all the way to a SCSI-II device + * and commands that are currently executing. This means that an + * unlimited number of commands may be queued, letting + * more commands propagate from the higher driver levels giving higher + * throughput. Note that both I_T_L and I_T_L_Q nexuses are supported, + * allowing multiple commands to propagate all the way to a SCSI-II device * while a command is already executing. * * - * Issues specific to the NCR5380 : + * Issues specific to the NCR5380 : * - * When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead - * piece of hardware that requires you to sit in a loop polling for - * the REQ signal as long as you are connected. Some devices are - * brain dead (ie, many TEXEL CD ROM drives) and won't disconnect - * while doing long seek operations. - * - * The workaround for this is to keep track of devices that have - * disconnected. If the device hasn't disconnected, for commands that - * should disconnect, we do something like - * - * while (!REQ is asserted) { sleep for N usecs; poll for M usecs } - * - * Some tweaking of N and M needs to be done. An algorithm based - * on "time to data" would give the best results as long as short time - * to datas (ie, on the same track) were considered, however these + * When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead + * piece of hardware that requires you to sit in a loop polling for + * the REQ signal as long as you are connected. Some devices are + * brain dead (ie, many TEXEL CD ROM drives) and won't disconnect + * while doing long seek operations. [...] These * broken devices are the exception rather than the rule and I'd rather * spend my time optimizing for the normal case. * @@ -159,23 +87,23 @@ * which is started from a workqueue for each NCR5380 host in the * system. It attempts to establish I_T_L or I_T_L_Q nexuses by * removing the commands from the issue queue and calling - * NCR5380_select() if a nexus is not established. + * NCR5380_select() if a nexus is not established. * * Once a nexus is established, the NCR5380_information_transfer() * phase goes through the various phases as instructed by the target. * if the target goes into MSG IN and sends a DISCONNECT message, * the command structure is placed into the per instance disconnected - * queue, and NCR5380_main tries to find more work. If the target is + * queue, and NCR5380_main tries to find more work. If the target is * idle for too long, the system will try to sleep. * * If a command has disconnected, eventually an interrupt will trigger, * calling NCR5380_intr() which will in turn call NCR5380_reselect * to reestablish a nexus. This will run main if necessary. * - * On command termination, the done function will be called as + * On command termination, the done function will be called as * appropriate. * - * SCSI pointers are maintained in the SCp field of SCSI command + * SCSI pointers are maintained in the SCp field of SCSI command * structures, being initialized after the command is connected * in NCR5380_select, and set as appropriate in NCR5380_information_transfer. * Note that in violation of the standard, an implicit SAVE POINTERS operation @@ -185,73 +113,48 @@ /* * Using this file : * This file a skeleton Linux SCSI driver for the NCR 5380 series - * of chips. To use it, you write an architecture specific functions + * of chips. To use it, you write an architecture specific functions * and macros and include this file in your driver. * - * These macros control options : - * AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be - * defined. - * + * These macros control options : + * AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be + * defined. + * * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically - * for commands that return with a CHECK CONDITION status. + * for commands that return with a CHECK CONDITION status. * * DIFFERENTIAL - if defined, NCR53c81 chips will use external differential - * transceivers. + * transceivers. * * DONT_USE_INTR - if defined, never use interrupts, even if we probe or - * override-configure an IRQ. - * - * LIMIT_TRANSFERSIZE - if defined, limit the pseudo-dma transfers to 512 - * bytes at a time. Since interrupts are disabled by default during - * these transfers, we might need this to give reasonable interrupt - * service time if the transfer size gets too large. - * - * LINKED - if defined, linked commands are supported. + * override-configure an IRQ. * * PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases. * * REAL_DMA - if defined, REAL DMA is used during the data transfer phases. * * REAL_DMA_POLL - if defined, REAL DMA is used but the driver doesn't - * rely on phase mismatch and EOP interrupts to determine end - * of phase. - * - * UNSAFE - leave interrupts enabled during pseudo-DMA transfers. You - * only really want to use this if you're having a problem with - * dropped characters during high speed communications, and even - * then, you're going to be better off twiddling with transfersize - * in the high level code. - * - * Defaults for these will be provided although the user may want to adjust - * these to allocate CPU resources to the SCSI driver or "real" code. - * - * USLEEP_SLEEP - amount of time, in jiffies, to sleep - * - * USLEEP_POLL - amount of time, in jiffies, to poll + * rely on phase mismatch and EOP interrupts to determine end + * of phase. * * These macros MUST be defined : - * NCR5380_local_declare() - declare any local variables needed for your - * transfer routines. * - * NCR5380_setup(instance) - initialize any local variables needed from a given - * instance of the host adapter for NCR5380_{read,write,pread,pwrite} - * * NCR5380_read(register) - read from the specified register * - * NCR5380_write(register, value) - write to the specific register + * NCR5380_write(register, value) - write to the specific register * - * NCR5380_implementation_fields - additional fields needed for this - * specific implementation of the NCR5380 + * NCR5380_implementation_fields - additional fields needed for this + * specific implementation of the NCR5380 * * Either real DMA *or* pseudo DMA may be implemented - * REAL functions : + * REAL functions : * NCR5380_REAL_DMA should be defined if real DMA is to be used. - * Note that the DMA setup functions should return the number of bytes - * that they were able to program the controller for. + * Note that the DMA setup functions should return the number of bytes + * that they were able to program the controller for. * - * Also note that generic i386/PC versions of these macros are - * available as NCR5380_i386_dma_write_setup, - * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. + * Also note that generic i386/PC versions of these macros are + * available as NCR5380_i386_dma_write_setup, + * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. * * NCR5380_dma_write_setup(instance, src, count) - initialize * NCR5380_dma_read_setup(instance, dst, count) - initialize @@ -262,25 +165,25 @@ * NCR5380_pread(instance, dst, count); * * The generic driver is initialized by calling NCR5380_init(instance), - * after setting the appropriate host specific fields and ID. If the + * after setting the appropriate host specific fields and ID. If the * driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance, * possible) function may be used. */ -static int do_abort(struct Scsi_Host *host); -static void do_reset(struct Scsi_Host *host); +static int do_abort(struct Scsi_Host *); +static void do_reset(struct Scsi_Host *); -/* - * initialize_SCp - init the scsi pointer field - * @cmd: command block to set up +/** + * initialize_SCp - init the scsi pointer field + * @cmd: command block to set up * - * Set up the internal fields in the SCSI command. + * Set up the internal fields in the SCSI command. */ static inline void initialize_SCp(struct scsi_cmnd *cmd) { - /* - * Initialize the Scsi Pointer field so that all of the commands in the + /* + * Initialize the Scsi Pointer field so that all of the commands in the * various queues are valid. */ @@ -295,120 +198,123 @@ static inline void initialize_SCp(struct scsi_cmnd *cmd) cmd->SCp.ptr = NULL; cmd->SCp.this_residual = 0; } + + cmd->SCp.Status = 0; + cmd->SCp.Message = 0; } /** - * NCR5380_poll_politely - wait for NCR5380 status bits - * @instance: controller to poll - * @reg: 5380 register to poll - * @bit: Bitmask to check - * @val: Value required to exit - * - * Polls the NCR5380 in a reasonably efficient manner waiting for - * an event to occur, after a short quick poll we begin giving the - * CPU back in non IRQ contexts - * - * Returns the value of the register or a negative error code. + * NCR5380_poll_politely2 - wait for two chip register values + * @instance: controller to poll + * @reg1: 5380 register to poll + * @bit1: Bitmask to check + * @val1: Expected value + * @reg2: Second 5380 register to poll + * @bit2: Second bitmask to check + * @val2: Second expected value + * @wait: Time-out in jiffies + * + * Polls the chip in a reasonably efficient manner waiting for an + * event to occur. After a short quick poll we begin to yield the CPU + * (if possible). In irq contexts the time-out is arbitrarily limited. + * Callers may hold locks as long as they are held in irq mode. + * + * Returns 0 if either or both event(s) occurred otherwise -ETIMEDOUT. */ - -static int NCR5380_poll_politely(struct Scsi_Host *instance, int reg, int bit, int val, int t) + +static int NCR5380_poll_politely2(struct Scsi_Host *instance, + int reg1, int bit1, int val1, + int reg2, int bit2, int val2, int wait) { - NCR5380_local_declare(); - int n = 500; /* At about 8uS a cycle for the cpu access */ - unsigned long end = jiffies + t; - int r; - - NCR5380_setup(instance); - - while( n-- > 0) - { - r = NCR5380_read(reg); - if((r & bit) == val) + struct NCR5380_hostdata *hostdata = shost_priv(instance); + unsigned long deadline = jiffies + wait; + unsigned long n; + + /* Busy-wait for up to 10 ms */ + n = min(10000U, jiffies_to_usecs(wait)); + n *= hostdata->accesses_per_ms; + n /= 2000; + do { + if ((NCR5380_read(reg1) & bit1) == val1) + return 0; + if ((NCR5380_read(reg2) & bit2) == val2) return 0; cpu_relax(); - } - - /* t time yet ? */ - while(time_before(jiffies, end)) - { - r = NCR5380_read(reg); - if((r & bit) == val) + } while (n--); + + if (irqs_disabled() || in_interrupt()) + return -ETIMEDOUT; + + /* Repeatedly sleep for 1 ms until deadline */ + while (time_is_after_jiffies(deadline)) { + schedule_timeout_uninterruptible(1); + if ((NCR5380_read(reg1) & bit1) == val1) + return 0; + if ((NCR5380_read(reg2) & bit2) == val2) return 0; - if(!in_interrupt()) - cond_resched(); - else - cpu_relax(); } + return -ETIMEDOUT; } -static struct { - unsigned char value; - const char *name; -} phases[] __maybe_unused = { - {PHASE_DATAOUT, "DATAOUT"}, - {PHASE_DATAIN, "DATAIN"}, - {PHASE_CMDOUT, "CMDOUT"}, - {PHASE_STATIN, "STATIN"}, - {PHASE_MSGOUT, "MSGOUT"}, - {PHASE_MSGIN, "MSGIN"}, - {PHASE_UNKNOWN, "UNKNOWN"} -}; +static inline int NCR5380_poll_politely(struct Scsi_Host *instance, + int reg, int bit, int val, int wait) +{ + return NCR5380_poll_politely2(instance, reg, bit, val, + reg, bit, val, wait); +} #if NDEBUG static struct { unsigned char mask; const char *name; -} signals[] = { - {SR_DBP, "PARITY"}, - {SR_RST, "RST"}, - {SR_BSY, "BSY"}, - {SR_REQ, "REQ"}, - {SR_MSG, "MSG"}, - {SR_CD, "CD"}, - {SR_IO, "IO"}, - {SR_SEL, "SEL"}, +} signals[] = { + {SR_DBP, "PARITY"}, + {SR_RST, "RST"}, + {SR_BSY, "BSY"}, + {SR_REQ, "REQ"}, + {SR_MSG, "MSG"}, + {SR_CD, "CD"}, + {SR_IO, "IO"}, + {SR_SEL, "SEL"}, {0, NULL} -}, +}, basrs[] = { - {BASR_ATN, "ATN"}, - {BASR_ACK, "ACK"}, + {BASR_ATN, "ATN"}, + {BASR_ACK, "ACK"}, {0, NULL} -}, -icrs[] = { - {ICR_ASSERT_RST, "ASSERT RST"}, - {ICR_ASSERT_ACK, "ASSERT ACK"}, - {ICR_ASSERT_BSY, "ASSERT BSY"}, - {ICR_ASSERT_SEL, "ASSERT SEL"}, - {ICR_ASSERT_ATN, "ASSERT ATN"}, - {ICR_ASSERT_DATA, "ASSERT DATA"}, +}, +icrs[] = { + {ICR_ASSERT_RST, "ASSERT RST"}, + {ICR_ASSERT_ACK, "ASSERT ACK"}, + {ICR_ASSERT_BSY, "ASSERT BSY"}, + {ICR_ASSERT_SEL, "ASSERT SEL"}, + {ICR_ASSERT_ATN, "ASSERT ATN"}, + {ICR_ASSERT_DATA, "ASSERT DATA"}, {0, NULL} -}, -mrs[] = { - {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"}, - {MR_TARGET, "MODE TARGET"}, - {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"}, - {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"}, - {MR_MONITOR_BSY, "MODE MONITOR BSY"}, - {MR_DMA_MODE, "MODE DMA"}, - {MR_ARBITRATE, "MODE ARBITRATION"}, +}, +mrs[] = { + {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"}, + {MR_TARGET, "MODE TARGET"}, + {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"}, + {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"}, + {MR_ENABLE_EOP_INTR, "MODE EOP INTR"}, + {MR_MONITOR_BSY, "MODE MONITOR BSY"}, + {MR_DMA_MODE, "MODE DMA"}, + {MR_ARBITRATE, "MODE ARBITRATION"}, {0, NULL} }; /** - * NCR5380_print - print scsi bus signals - * @instance: adapter state to dump - * - * Print the SCSI bus signals for debugging purposes + * NCR5380_print - print scsi bus signals + * @instance: adapter state to dump * - * Locks: caller holds hostdata lock (not essential) + * Print the SCSI bus signals for debugging purposes */ static void NCR5380_print(struct Scsi_Host *instance) { - NCR5380_local_declare(); unsigned char status, data, basr, mr, icr, i; - NCR5380_setup(instance); data = NCR5380_read(CURRENT_SCSI_DATA_REG); status = NCR5380_read(STATUS_REG); @@ -435,117 +341,56 @@ static void NCR5380_print(struct Scsi_Host *instance) printk("\n"); } +static struct { + unsigned char value; + const char *name; +} phases[] = { + {PHASE_DATAOUT, "DATAOUT"}, + {PHASE_DATAIN, "DATAIN"}, + {PHASE_CMDOUT, "CMDOUT"}, + {PHASE_STATIN, "STATIN"}, + {PHASE_MSGOUT, "MSGOUT"}, + {PHASE_MSGIN, "MSGIN"}, + {PHASE_UNKNOWN, "UNKNOWN"} +}; -/* - * NCR5380_print_phase - show SCSI phase - * @instance: adapter to dump - * - * Print the current SCSI phase for debugging purposes +/** + * NCR5380_print_phase - show SCSI phase + * @instance: adapter to dump * - * Locks: none + * Print the current SCSI phase for debugging purposes */ static void NCR5380_print_phase(struct Scsi_Host *instance) { - NCR5380_local_declare(); unsigned char status; int i; - NCR5380_setup(instance); status = NCR5380_read(STATUS_REG); if (!(status & SR_REQ)) - printk("scsi%d : REQ not asserted, phase unknown.\n", instance->host_no); + shost_printk(KERN_DEBUG, instance, "REQ not asserted, phase unknown.\n"); else { - for (i = 0; (phases[i].value != PHASE_UNKNOWN) && (phases[i].value != (status & PHASE_MASK)); ++i); - printk("scsi%d : phase %s\n", instance->host_no, phases[i].name); + for (i = 0; (phases[i].value != PHASE_UNKNOWN) && + (phases[i].value != (status & PHASE_MASK)); ++i) + ; + shost_printk(KERN_DEBUG, instance, "phase %s\n", phases[i].name); } } #endif -/* - * These need tweaking, and would probably work best as per-device - * flags initialized differently for disk, tape, cd, etc devices. - * People with broken devices are free to experiment as to what gives - * the best results for them. - * - * USLEEP_SLEEP should be a minimum seek time. - * - * USLEEP_POLL should be a maximum rotational latency. - */ -#ifndef USLEEP_SLEEP -/* 20 ms (reasonable hard disk speed) */ -#define USLEEP_SLEEP msecs_to_jiffies(20) -#endif -/* 300 RPM (floppy speed) */ -#ifndef USLEEP_POLL -#define USLEEP_POLL msecs_to_jiffies(200) -#endif -#ifndef USLEEP_WAITLONG -/* RvC: (reasonable time to wait on select error) */ -#define USLEEP_WAITLONG USLEEP_SLEEP -#endif -/* - * Function : int should_disconnect (unsigned char cmd) - * - * Purpose : decide whether a command would normally disconnect or - * not, since if it won't disconnect we should go to sleep. - * - * Input : cmd - opcode of SCSI command - * - * Returns : DISCONNECT_LONG if we should disconnect for a really long - * time (ie always, sleep, look for REQ active, sleep), - * DISCONNECT_TIME_TO_DATA if we would only disconnect for a normal - * time-to-data delay, DISCONNECT_NONE if this command would return - * immediately. - * - * Future sleep algorithms based on time to data can exploit - * something like this so they can differentiate between "normal" - * (ie, read, write, seek) and unusual commands (ie, * format). - * - * Note : We don't deal with commands that handle an immediate disconnect, - * - */ - -static int should_disconnect(unsigned char cmd) -{ - switch (cmd) { - case READ_6: - case WRITE_6: - case SEEK_6: - case READ_10: - case WRITE_10: - case SEEK_10: - return DISCONNECT_TIME_TO_DATA; - case FORMAT_UNIT: - case SEARCH_HIGH: - case SEARCH_LOW: - case SEARCH_EQUAL: - return DISCONNECT_LONG; - default: - return DISCONNECT_NONE; - } -} - -static void NCR5380_set_timer(struct NCR5380_hostdata *hostdata, unsigned long timeout) -{ - hostdata->time_expires = jiffies + timeout; - schedule_delayed_work(&hostdata->coroutine, timeout); -} - - -static int probe_irq __initdata = 0; +static int probe_irq __initdata; /** - * probe_intr - helper for IRQ autoprobe - * @irq: interrupt number - * @dev_id: unused - * @regs: unused + * probe_intr - helper for IRQ autoprobe + * @irq: interrupt number + * @dev_id: unused + * @regs: unused * - * Set a flag to indicate the IRQ in question was received. This is - * used by the IRQ probe code. + * Set a flag to indicate the IRQ in question was received. This is + * used by the IRQ probe code. */ - + static irqreturn_t __init probe_intr(int irq, void *dev_id) { probe_irq = irq; @@ -553,24 +398,20 @@ static irqreturn_t __init probe_intr(int irq, void *dev_id) } /** - * NCR5380_probe_irq - find the IRQ of an NCR5380 - * @instance: NCR5380 controller - * @possible: bitmask of ISA IRQ lines + * NCR5380_probe_irq - find the IRQ of an NCR5380 + * @instance: NCR5380 controller + * @possible: bitmask of ISA IRQ lines * - * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ - * and then looking to see what interrupt actually turned up. - * - * Locks: none, irqs must be enabled on entry + * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ + * and then looking to see what interrupt actually turned up. */ static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance, int possible) { - NCR5380_local_declare(); - struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; + struct NCR5380_hostdata *hostdata = shost_priv(instance); unsigned long timeout; int trying_irqs, i, mask; - NCR5380_setup(instance); for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1) if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe", NULL) == 0)) @@ -581,7 +422,7 @@ static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance, /* * A interrupt is triggered whenever BSY = false, SEL = true - * and a bit set in the SELECT_ENABLE_REG is asserted on the + * and a bit set in the SELECT_ENABLE_REG is asserted on the * SCSI bus. * * Note that the bus is only driven when the phase control signals @@ -596,7 +437,7 @@ static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance, while (probe_irq == NO_IRQ && time_before(jiffies, timeout)) schedule_timeout_uninterruptible(1); - + NCR5380_write(SELECT_ENABLE_REG, 0); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); @@ -608,12 +449,10 @@ static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance, } /** - * NCR58380_info - report driver and host information - * @instance: relevant scsi host instance - * - * For use as the host template info() handler. + * NCR58380_info - report driver and host information + * @instance: relevant scsi host instance * - * Locks: none + * For use as the host template info() handler. */ static const char *NCR5380_info(struct Scsi_Host *instance) @@ -633,20 +472,14 @@ static void prepare_info(struct Scsi_Host *instance) "can_queue %d, cmd_per_lun %d, " "sg_tablesize %d, this_id %d, " "flags { %s%s%s}, " -#if defined(USLEEP_POLL) && defined(USLEEP_WAITLONG) - "USLEEP_POLL %lu, USLEEP_WAITLONG %lu, " -#endif "options { %s} ", instance->hostt->name, instance->io_port, instance->n_io_port, instance->base, instance->irq, instance->can_queue, instance->cmd_per_lun, instance->sg_tablesize, instance->this_id, - hostdata->flags & FLAG_NCR53C400 ? "NCR53C400 " : "", - hostdata->flags & FLAG_DTC3181E ? "DTC3181E " : "", + hostdata->flags & FLAG_NO_DMA_FIXUP ? "NO_DMA_FIXUP " : "", hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "", -#if defined(USLEEP_POLL) && defined(USLEEP_WAITLONG) - USLEEP_POLL, USLEEP_WAITLONG, -#endif + hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY " : "", #ifdef AUTOPROBE_IRQ "AUTOPROBE_IRQ " #endif @@ -665,46 +498,10 @@ static void prepare_info(struct Scsi_Host *instance) #ifdef PSEUDO_DMA "PSEUDO_DMA " #endif -#ifdef UNSAFE - "UNSAFE " -#endif -#ifdef NCR53C400 - "NCR53C400 " -#endif ""); } -/** - * NCR5380_print_status - dump controller info - * @instance: controller to dump - * - * Print commands in the various queues, called from NCR5380_abort - * and NCR5380_debug to aid debugging. - * - * Locks: called functions disable irqs - */ - -static void NCR5380_print_status(struct Scsi_Host *instance) -{ - NCR5380_dprint(NDEBUG_ANY, instance); - NCR5380_dprint_phase(NDEBUG_ANY, instance); -} - #ifdef PSEUDO_DMA -/******************************************/ -/* - * /proc/scsi/[dtc pas16 t128 generic]/[0-ASC_NUM_BOARD_SUPPORTED] - * - * *buffer: I/O buffer - * **start: if inout == FALSE pointer into buffer where user read should start - * offset: current offset - * length: length of buffer - * hostno: Scsi_Host host_no - * inout: TRUE - user is writing; FALSE - user is r |