diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-08-11 07:04:17 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-08-11 07:04:17 -0700 |
commit | 5fd41f2a10b38ab84b4c2436140ce490d34291fa (patch) | |
tree | 0c5e39f8c0ca03004db863cf05e5b20873c0cb48 | |
parent | 2213d7c29a434626a15ffb285182cd19ed0b722d (diff) | |
parent | 47d104ba5879790c7c91c3390b0b08399e168efe (diff) |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal updates from Zhang Rui:
"Specifics:
- adds full support for 2 types of Thermal Controllers produced by
STMicroelectronics. One is a more traditional memory mapped
variant, the other is controlled solely by system configuration
registers. From Lee Jones.
- add TMU (Thermal Management Unit) support for Exynos3250 Soc.
From Chanwoo Choi.
- add critical and passive trip point support for int3403 thermal
driver. From Srinivas Pandruvada.
- a couple of small fixes/cleanups from Javi Merino, and Geert
Uytterhoeven"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: document struct thermal_zone_device and thermal_governor
thermal: cpu_cooling: fix typo highjack -> hijack
thermal: rcar: Document SoC-specific bindings
thermal: samsung: Add TMU support for Exynos3250 SoC
thermal: exynos: fix ordering in exynos_tmu_remove()
thermal: allow building dove_thermal with mvebu
thermal: sti: Add support for ST's Memory Mapped based Thermal controller
thermal: sti: Add support for ST's System Config Register based Thermal controller
thermal: sti: Introduce ST Thermal core code
thermal: sti: Supply Device Tree documentation
Thermal: int3403: Add CRT and PSV trip
-rw-r--r-- | Documentation/devicetree/bindings/thermal/exynos-thermal.txt | 1 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/thermal/rcar-thermal.txt | 18 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/thermal/st-thermal.txt | 42 | ||||
-rw-r--r-- | drivers/thermal/Kconfig | 7 | ||||
-rw-r--r-- | drivers/thermal/Makefile | 1 | ||||
-rw-r--r-- | drivers/thermal/cpu_cooling.c | 2 | ||||
-rw-r--r-- | drivers/thermal/int3403_thermal.c | 67 | ||||
-rw-r--r-- | drivers/thermal/samsung/exynos_tmu.c | 11 | ||||
-rw-r--r-- | drivers/thermal/samsung/exynos_tmu.h | 3 | ||||
-rw-r--r-- | drivers/thermal/samsung/exynos_tmu_data.c | 89 | ||||
-rw-r--r-- | drivers/thermal/samsung/exynos_tmu_data.h | 7 | ||||
-rw-r--r-- | drivers/thermal/st/Kconfig | 12 | ||||
-rw-r--r-- | drivers/thermal/st/Makefile | 3 | ||||
-rw-r--r-- | drivers/thermal/st/st_thermal.c | 313 | ||||
-rw-r--r-- | drivers/thermal/st/st_thermal.h | 104 | ||||
-rw-r--r-- | drivers/thermal/st/st_thermal_memmap.c | 209 | ||||
-rw-r--r-- | drivers/thermal/st/st_thermal_syscfg.c | 179 | ||||
-rw-r--r-- | include/linux/thermal.h | 46 |
18 files changed, 1093 insertions, 21 deletions
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index c94909215c07..ae738f562acc 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -3,6 +3,7 @@ ** Required properties: - compatible : One of the following: + "samsung,exynos3250-tmu" "samsung,exynos4412-tmu" "samsung,exynos4210-tmu" "samsung,exynos5250-tmu" diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt index 28ef498a66e5..0ef00be44b01 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt @@ -1,7 +1,13 @@ * Renesas R-Car Thermal Required properties: -- compatible : "renesas,rcar-thermal" +- compatible : "renesas,thermal-<soctype>", "renesas,rcar-thermal" + as fallback. + Examples with soctypes are: + - "renesas,thermal-r8a73a4" (R-Mobile AP6) + - "renesas,thermal-r8a7779" (R-Car H1) + - "renesas,thermal-r8a7790" (R-Car H2) + - "renesas,thermal-r8a7791" (R-Car M2) - reg : Address range of the thermal registers. The 1st reg will be recognized as common register if it has "interrupts". @@ -12,18 +18,18 @@ Option properties: Example (non interrupt support): -thermal@e61f0100 { - compatible = "renesas,rcar-thermal"; - reg = <0xe61f0100 0x38>; +thermal@ffc48000 { + compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; + reg = <0xffc48000 0x38>; }; Example (interrupt support): thermal@e61f0000 { - compatible = "renesas,rcar-thermal"; + compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; reg = <0xe61f0000 0x14 0xe61f0100 0x38 0xe61f0200 0x38 0xe61f0300 0x38>; - interrupts = <0 69 4>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt new file mode 100644 index 000000000000..3b9251b4a145 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/st-thermal.txt @@ -0,0 +1,42 @@ +Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs. + +Required parameters: +------------------- + +compatible : st,<SoC>-<module>-thermal; should be one of: + "st,stih415-sas-thermal", + "st,stih415-mpe-thermal", + "st,stih416-sas-thermal" + "st,stih416-mpe-thermal" + "st,stid127-thermal" or + "st,stih407-thermal" + according to the SoC type (stih415, stih416, stid127, stih407) + and module type (sas or mpe). On stid127 & stih407 there is only + one die/module, so there is no module type in the compatible + string. +clock-names : Should be "thermal". + See: Documentation/devicetree/bindings/resource-names.txt +clocks : Phandle of the clock used by the thermal sensor. + See: Documentation/devicetree/bindings/clock/clock-bindings.txt + +Optional parameters: +------------------- + +reg : For non-sysconf based sensors, this should be the physical base + address and length of the sensor's registers. +interrupts : Standard way to define interrupt number. + Interrupt is mandatory to be defined when compatible is + "stih416-mpe-thermal". + NB: For thermal sensor's for which no interrupt has been + defined, a polling delay of 1000ms will be used to read the + temperature from device. + +Example: + + temp1@fdfe8000 { + compatible = "st,stih416-mpe-thermal"; + reg = <0xfdfe8000 0x10>; + clock-names = "thermal"; + clocks = <&clk_m_mpethsens>; + interrupts = <GIC_SPI 23 IRQ_TYPE_NONE>; + }; diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index f9a13867cb70..693208eb9047 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -151,7 +151,7 @@ config KIRKWOOD_THERMAL config DOVE_THERMAL tristate "Temperature sensor on Marvell Dove SoCs" - depends on ARCH_DOVE + depends on ARCH_DOVE || MACH_DOVE depends on OF help Support for the Dove thermal sensor driver in the Linux thermal @@ -243,4 +243,9 @@ depends on ARCH_EXYNOS source "drivers/thermal/samsung/Kconfig" endmenu +menu "STMicroelectronics thermal drivers" +depends on ARCH_STI && OF +source "drivers/thermal/st/Kconfig" +endmenu + endif diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index de0636a57a64..31e232f84b6b 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -32,3 +32,4 @@ obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ obj-$(CONFIG_ACPI_INT3403_THERMAL) += int3403_thermal.o +obj-$(CONFIG_ST_THERMAL) += st/ diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 84a75f89bf74..1ab0018271c5 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -305,7 +305,7 @@ static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device, * @event: value showing cpufreq event for which this function invoked. * @data: callback-specific data * - * Callback to highjack the notification on cpufreq policy transition. + * Callback to hijack the notification on cpufreq policy transition. * Every time there is a change in policy, we will intercept and * update the cpufreq policy with thermal constraints. * diff --git a/drivers/thermal/int3403_thermal.c b/drivers/thermal/int3403_thermal.c index e93f0253f6ed..17554eeb3953 100644 --- a/drivers/thermal/int3403_thermal.c +++ b/drivers/thermal/int3403_thermal.c @@ -33,6 +33,10 @@ struct int3403_sensor { struct thermal_zone_device *tzone; unsigned long *thresholds; + unsigned long crit_temp; + int crit_trip_id; + unsigned long psv_temp; + int psv_trip_id; }; static int sys_get_curr_temp(struct thermal_zone_device *tzone, @@ -79,12 +83,18 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzone, struct acpi_device *device = tzone->devdata; struct int3403_sensor *obj = acpi_driver_data(device); - /* - * get_trip_temp is a mandatory callback but - * PATx method doesn't return any value, so return - * cached value, which was last set from user space. - */ - *temp = obj->thresholds[trip]; + if (trip == obj->crit_trip_id) + *temp = obj->crit_temp; + else if (trip == obj->psv_trip_id) + *temp = obj->psv_temp; + else { + /* + * get_trip_temp is a mandatory callback but + * PATx method doesn't return any value, so return + * cached value, which was last set from user space. + */ + *temp = obj->thresholds[trip]; + } return 0; } @@ -92,8 +102,14 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzone, static int sys_get_trip_type(struct thermal_zone_device *thermal, int trip, enum thermal_trip_type *type) { + struct acpi_device *device = thermal->devdata; + struct int3403_sensor *obj = acpi_driver_data(device); + /* Mandatory callback, may not mean much here */ - *type = THERMAL_TRIP_PASSIVE; + if (trip == obj->crit_trip_id) + *type = THERMAL_TRIP_CRITICAL; + else + *type = THERMAL_TRIP_PASSIVE; return 0; } @@ -155,6 +171,34 @@ static void acpi_thermal_notify(struct acpi_device *device, u32 event) } } +static int sys_get_trip_crt(struct acpi_device *device, unsigned long *temp) +{ + unsigned long long crt; + acpi_status status; + + status = acpi_evaluate_integer(device->handle, "_CRT", NULL, &crt); + if (ACPI_FAILURE(status)) + return -EIO; + + *temp = DECI_KELVIN_TO_MILLI_CELSIUS(crt, KELVIN_OFFSET); + + return 0; +} + +static int sys_get_trip_psv(struct acpi_device *device, unsigned long *temp) +{ + unsigned long long psv; + acpi_status status; + + status = acpi_evaluate_integer(device->handle, "_PSV", NULL, &psv); + if (ACPI_FAILURE(status)) + return -EIO; + + *temp = DECI_KELVIN_TO_MILLI_CELSIUS(psv, KELVIN_OFFSET); + + return 0; +} + static int acpi_int3403_add(struct acpi_device *device) { int result = 0; @@ -194,6 +238,15 @@ static int acpi_int3403_add(struct acpi_device *device) return -ENOMEM; trip_mask = BIT(trip_cnt) - 1; } + + obj->psv_trip_id = -1; + if (!sys_get_trip_psv(device, &obj->psv_temp)) + obj->psv_trip_id = trip_cnt++; + + obj->crit_trip_id = -1; + if (!sys_get_trip_crt(device, &obj->crit_temp)) + obj->crit_trip_id = trip_cnt++; + obj->tzone = thermal_zone_device_register(acpi_device_bid(device), trip_cnt, trip_mask, device, &tzone_ops, NULL, 0, 0); diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index d7ca9f49c9cb..acbff14da3a4 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -505,6 +505,10 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id) static const struct of_device_id exynos_tmu_match[] = { { + .compatible = "samsung,exynos3250-tmu", + .data = (void *)EXYNOS3250_TMU_DRV_DATA, + }, + { .compatible = "samsung,exynos4210-tmu", .data = (void *)EXYNOS4210_TMU_DRV_DATA, }, @@ -677,7 +681,8 @@ static int exynos_tmu_probe(struct platform_device *pdev) goto err_clk_sec; } - if (pdata->type == SOC_ARCH_EXYNOS4210 || + if (pdata->type == SOC_ARCH_EXYNOS3250 || + pdata->type == SOC_ARCH_EXYNOS4210 || pdata->type == SOC_ARCH_EXYNOS4412 || pdata->type == SOC_ARCH_EXYNOS5250 || pdata->type == SOC_ARCH_EXYNOS5260 || @@ -759,10 +764,10 @@ static int exynos_tmu_remove(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); - exynos_tmu_control(pdev, false); - exynos_unregister_thermal(data->reg_conf); + exynos_tmu_control(pdev, false); + clk_unprepare(data->clk); if (!IS_ERR(data->clk_sec)) clk_unprepare(data->clk_sec); diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index edd08cf76729..1b4a6444ea61 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -40,7 +40,8 @@ enum calibration_mode { }; enum soc_type { - SOC_ARCH_EXYNOS4210 = 1, + SOC_ARCH_EXYNOS3250 = 1, + SOC_ARCH_EXYNOS4210, SOC_ARCH_EXYNOS4412, SOC_ARCH_EXYNOS5250, SOC_ARCH_EXYNOS5260, diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c index c1d81dcd7819..aa8e0dee2055 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.c +++ b/drivers/thermal/samsung/exynos_tmu_data.c @@ -90,6 +90,95 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = { }; #endif +#if defined(CONFIG_SOC_EXYNOS3250) +static const struct exynos_tmu_registers exynos3250_tmu_registers = { + .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, + .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, + .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, + .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, + .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, + .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, + .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, + .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, + .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, + .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, + .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, + .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, + .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, + .tmu_status = EXYNOS_TMU_REG_STATUS, + .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, + .threshold_th0 = EXYNOS_THD_TEMP_RISE, + .threshold_th1 = EXYNOS_THD_TEMP_FALL, + .tmu_inten = EXYNOS_TMU_REG_INTEN, + .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT, + .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT, + .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT, + .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, + .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, + .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT, + .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, + .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK, + .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK, + .emul_con = EXYNOS_EMUL_CON, + .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, + .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, + .emul_time_mask = EXYNOS_EMUL_TIME_MASK, +}; + +#define EXYNOS3250_TMU_DATA \ + .threshold_falling = 10, \ + .trigger_levels[0] = 70, \ + .trigger_levels[1] = 95, \ + .trigger_levels[2] = 110, \ + .trigger_levels[3] = 120, \ + .trigger_enable[0] = true, \ + .trigger_enable[1] = true, \ + .trigger_enable[2] = true, \ + .trigger_enable[3] = false, \ + .trigger_type[0] = THROTTLE_ACTIVE, \ + .trigger_type[1] = THROTTLE_ACTIVE, \ + .trigger_type[2] = SW_TRIP, \ + .trigger_type[3] = HW_TRIP, \ + .max_trigger_level = 4, \ + .gain = 8, \ + .reference_voltage = 16, \ + .noise_cancel_mode = 4, \ + .cal_type = TYPE_TWO_POINT_TRIMMING, \ + .efuse_value = 55, \ + .min_efuse_value = 40, \ + .max_efuse_value = 100, \ + .first_point_trim = 25, \ + .second_point_trim = 85, \ + .default_temp_offset = 50, \ + .freq_tab[0] = { \ + .freq_clip_max = 800 * 1000, \ + .temp_level = 70, \ + }, \ + .freq_tab[1] = { \ + .freq_clip_max = 400 * 1000, \ + .temp_level = 95, \ + }, \ + .freq_tab_count = 2, \ + .registers = &exynos3250_tmu_registers, \ + .features = (TMU_SUPPORT_EMULATION | \ + TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ + TMU_SUPPORT_EMUL_TIME) +#endif + +#if defined(CONFIG_SOC_EXYNOS3250) +struct exynos_tmu_init_data const exynos3250_default_tmu_data = { + .tmu_data = { + { + EXYNOS3250_TMU_DATA, + .type = SOC_ARCH_EXYNOS3250, + .test_mux = EXYNOS4412_MUX_ADDR_VALUE, + }, + }, + .tmu_count = 1, +}; +#endif + #if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) static const struct exynos_tmu_registers exynos4412_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h index d268981b65e5..f0979e598491 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.h +++ b/drivers/thermal/samsung/exynos_tmu_data.h @@ -148,6 +148,13 @@ #define EXYNOS5440_TMU_TH_RISE4_SHIFT 24 #define EXYNOS5440_EFUSE_SWAP_OFFSET 8 +#if defined(CONFIG_SOC_EXYNOS3250) +extern struct exynos_tmu_init_data const exynos3250_default_tmu_data; +#define EXYNOS3250_TMU_DRV_DATA (&exynos3250_default_tmu_data) +#else +#define EXYNOS3250_TMU_DRV_DATA (NULL) +#endif + #if defined(CONFIG_CPU_EXYNOS4210) extern struct exynos_tmu_init_data const exynos4210_default_tmu_data; #define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data) diff --git a/drivers/thermal/st/Kconfig b/drivers/thermal/st/Kconfig new file mode 100644 index 000000000000..490fdbe22eea --- /dev/null +++ b/drivers/thermal/st/Kconfig @@ -0,0 +1,12 @@ +config ST_THERMAL + tristate "Thermal sensors on STMicroelectronics STi series of SoCs" + help + Support for thermal sensors on STMicroelectronics STi series of SoCs. + +config ST_THERMAL_SYSCFG + select ST_THERMAL + tristate "STi series syscfg register access based thermal sensors" + +config ST_THERMAL_MEMMAP + select ST_THERMAL + tristate "STi series memory mapped access based thermal sensors" diff --git a/drivers/thermal/st/Makefile b/drivers/thermal/st/Makefile new file mode 100644 index 000000000000..b38878977bd8 --- /dev/null +++ b/drivers/thermal/st/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ST_THERMAL) := st_thermal.o +obj-$(CONFIG_ST_THERMAL_SYSCFG) += st_thermal_syscfg.o +obj-$(CONFIG_ST_THERMAL_MEMMAP) += st_thermal_memmap.o diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c new file mode 100644 index 000000000000..90163b384660 --- /dev/null +++ b/drivers/thermal/st/st_thermal.c @@ -0,0 +1,313 @@ +/* + * ST Thermal Sensor Driver core routines + * Author: Ajit Pal Singh <ajitpal.singh@st.com> + * + * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> + +#include "st_thermal.h" + +/* The Thermal Framework expects millidegrees */ +#define mcelsius(temp) ((temp) * 1000) + +/* + * Function to allocate regfields which are common + * between syscfg and memory mapped based sensors + */ +int st_thermal_alloc_regfields(struct st_thermal_sensor *sensor) +{ + struct device *dev = sensor->dev; + struct regmap *regmap = sensor->regmap; + const struct reg_field *reg_fields = sensor->cdata->reg_fields; + + sensor->dcorrect = devm_regmap_field_alloc(dev, regmap, + reg_fields[DCORRECT]); + + sensor->overflow = devm_regmap_field_alloc(dev, regmap, + reg_fields[OVERFLOW]); + + sensor->temp_data = devm_regmap_field_alloc(dev, regmap, + reg_fields[DATA]); + + if (IS_ERR(sensor->dcorrect) || + IS_ERR(sensor->overflow) || + IS_ERR(sensor->temp_data)) { + dev_err(dev, "failed to allocate common regfields\n"); + return -EINVAL; + } + + return sensor->ops->alloc_regfields(sensor); +} + +static int st_thermal_sensor_on(struct st_thermal_sensor *sensor) +{ + int ret; + struct device *dev = sensor->dev; + + ret = clk_prepare_enable(sensor->clk); + if (ret) { + dev_err(dev, "failed to enable clk\n"); + return ret; + } + + ret = sensor->ops->power_ctrl(sensor, POWER_ON); + if (ret) { + dev_err(dev, "failed to power on sensor\n"); + clk_disable_unprepare(sensor->clk); + } + + return ret; +} + +static int st_thermal_sensor_off(struct st_thermal_sensor *sensor) +{ + int ret; + + ret = sensor->ops->power_ctrl(sensor, POWER_OFF); + if (ret) + return ret; + + clk_disable_unprepare(sensor->clk); + + return 0; +} + +static int st_thermal_calibration(struct st_thermal_sensor *sensor) +{ + int ret; + unsigned int val; + struct device *dev = sensor->dev; + + /* Check if sensor calibration data is already written */ + ret = regmap_field_read(sensor->dcorrect, &val); + if (ret) { + dev_err(dev, "failed to read calibration data\n"); + return ret; + } + + if (!val) { + /* + * Sensor calibration value not set by bootloader, + * default calibration data to be used + */ + ret = regmap_field_write(sensor->dcorrect, + sensor->cdata->calibration_val); + if (ret) + dev_err(dev, "failed to set calibration data\n"); + } + + return ret; +} + +/* Callback to get temperature from HW*/ +static int st_thermal_get_temp(struct thermal_zone_device *th, + unsigned long *temperature) +{ + struct st_thermal_sensor *sensor = th->devdata; + struct device *dev = sensor->dev; + unsigned int temp; + unsigned int overflow; + int ret; + + ret = regmap_field_read(sensor->overflow, &overflow); + if (ret) + return ret; + if (overflow) + return -EIO; + + ret = regmap_field_read(sensor->temp_data, &temp); + if (ret) + return ret; + + temp += sensor->cdata->temp_adjust_val; + temp = mcelsius(temp); + + dev_dbg(dev, "temperature: %d\n", temp); + + *temperature = temp; + + return 0; +} + +static int st_thermal_get_trip_type(struct thermal_zone_device *th, + int trip, enum thermal_trip_type *type) +{ + struct st_thermal_sensor *sensor = th->devdata; + struct device *dev = sensor->dev; + + switch (trip) { + case 0: + *type = THERMAL_TRIP_CRITICAL; + break; + default: + dev_err(dev, "invalid trip point\n"); + return -EINVAL; + } + + return 0; +} + +static int st_thermal_get_trip_temp(struct thermal_zone_device *th, + int trip, unsigned long *temp) +{ + struct st_thermal_sensor *sensor = th->devdata; + struct device *dev = sensor->dev; + + switch (trip) { + case 0: + *temp = mcelsius(sensor->cdata->crit_temp); + break; + default: + dev_err(dev, "Invalid trip point\n"); + return -EINVAL; + } + + return 0; +} + +static struct thermal_zone_device_ops st_tz_ops = { + .get_temp = st_thermal_get_temp, + .get_trip_type = st_thermal_get_trip_type, + .get_trip_temp = st_thermal_get_trip_temp, +}; + +int st_thermal_register(struct platform_device *pdev, + const struct of_device_id *st_thermal_of_match) +{ + struct st_thermal_sensor *sensor; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + const struct of_device_id *match; + + int polling_delay; + int ret; + + if (!np) { + dev_err(dev, "device tree node not found\n"); + return -EINVAL; + } + + sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); + if (!sensor) + return -ENOMEM; + + sensor->dev = dev; + + match = of_match_device(st_thermal_of_match, dev); + if (!(match && match->data)) + return -EINVAL; + + sensor->cdata = match->data; + if (!sensor->cdata->ops) + return -EINVAL; + + sensor->ops = sensor->cdata->ops; + + ret = sensor->ops->regmap_init(sensor); + if (ret) + return ret; + + ret = st_thermal_alloc_regfields(sensor); + if (ret) + return ret; + + sensor->clk = devm_clk_get(dev, "thermal"); + if (IS_ERR(sensor->clk)) { + dev_err(dev, "failed to fetch clock\n"); + return PTR_ERR(sensor->clk); + } + + if (sensor->ops->register_enable_irq) { + ret = sensor->ops->register_enable_irq(sensor); + if (ret) + return ret; + } + + ret = st_thermal_sensor_on(sensor); + if (ret) + return ret; + + ret = st_thermal_calibration(sensor); + if (ret) + goto sensor_off; + + polling_delay = sensor->ops->register_enable_irq ? 0 : 1000; + + sensor->thermal_dev = + thermal_zone_device_register(dev_name(dev), 1, 0, sensor, + &st_tz_ops, NULL, 0, polling_delay); + if (IS_ERR(sensor->thermal_dev)) { + dev_err(dev, "failed to register thermal zone device\n"); + ret = PTR_ERR(sensor->thermal_dev); + goto sensor_off; + } + + platform_set_drvdata(pdev, sensor); + + return 0; + +sensor_off: + st_thermal_sensor_off(sensor); + + return ret; +} +EXPORT_SYMBOL_GPL(st_thermal_register); + +int st_thermal_unregister(struct platform_device *pdev) +{ + struct st_thermal_sensor *sensor = platform_get_drvdata(pdev); + + st_thermal_sensor_off(sensor); + thermal_zone_device_unregister(sensor->thermal_dev); + + return 0; +} +EXPORT_SYMBOL_GPL(st_thermal_unregister); + +static int st_thermal_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct st_thermal_sensor *sensor = platform_get_drvdata(pdev); + + return st_thermal_sensor_off(sensor); +} + +static int st_thermal_resume(struct device *dev) +{ + int ret; + struct platform_device *pdev = to_platform_device(dev); + struct st_thermal_sensor *sensor = platform_get_drvdata(pdev); + + ret = st_thermal_sensor_on(sensor); + if (ret) + return ret; + + ret = st_thermal_calibration(sensor); + if (ret) + return ret; + + if (sensor->ops->enable_irq) { + ret = sensor->ops->enable_irq(sensor); + if (ret) + return ret; + } + + return 0; +} +SIMPLE_DEV_PM_OPS(st_thermal_pm_ops, st_thermal_suspend, st_thermal_resume); +EXPORT_SYMBOL_GPL(st_thermal_pm_ops); + +MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/st/st_thermal.h b/drivers/thermal/st/st_thermal.h new file mode 100644 index 000000000000..fecafbe10fa7 --- /dev/null +++ b/drivers/thermal/st/st_thermal.h @@ -0,0 +1,104 @@ +/* + * ST Thermal Sensor Driver for STi series of SoCs + * Author: Ajit Pal Singh <ajitpal.singh@st.com> + * + * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __STI_THERMAL_SYSCFG_H +#define __STI_THERMAL_SYSCFG_H + +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/thermal.h> + +enum st_thermal_regfield_ids { + INT_THRESH_HI = 0, /* Top two regfield IDs are mutually exclusive */ + TEMP_PWR = 0, + DCORRECT, + OVERFLOW, + DATA, + INT_ENABLE, + + MAX_REGFIELDS +}; + +/* Thermal sensor power states */ +enum st_thermal_power_state { + POWER_OFF = 0, + POWER_ON +}; + +struct st_thermal_sensor; + +/** + * Description of private thermal sensor ops. + * + * @power_ctrl: Function for powering on/off a sensor. Clock to the + * sensor is also controlled from this function. + * @alloc_regfields: Allocate regmap register fields, specific to a sensor. + * @do_memmap_regmap: Memory map the thermal register space and init regmap + * instance or find regmap instance. + * @register_irq: Register an interrupt handler for a sensor. + */ +struct st_thermal_sensor_ops { + int (*power_ctrl)(struct st_thermal_sensor *, enum st_thermal_power_state); + int (*alloc_regfields)(struct st_thermal_sensor *); + int (*regmap_init)(struct st_thermal_sensor *); + int (*register_enable_irq)(struct st_thermal_sensor *); + int (*enable_irq)(struct st_thermal_sensor *); +}; + +/** + * Description of thermal driver compatible data. + * + * @reg_fields: Pointer to the regfields array for a sensor. + * @sys_compat: Pointer to the syscon node compatible string. + * @ops: Pointer to private thermal ops for a sensor. + * @calibration_val: Default calibration value to be written to the DCORRECT + * register field for a sensor. + * @temp_adjust_val: Value to be added/subtracted from the data read from + * the sensor. If value needs to be added please provide a + * positive value and if it is to be subtracted please + * provide a negative value. + * @crit_temp: The temperature beyond which the SoC should be shutdown + * to prevent damage. + */ +struct st_thermal_compat_data { + char *sys_compat; + const struct reg_field *reg_fields; + const struct st_thermal_sensor_ops *ops; + unsigned int calibration_val; + int temp_adjust_val; + int crit_temp; +}; + +struct st_thermal_sensor { + struct device *dev; + struct thermal_zone_device *thermal_dev; + const struct st_thermal_sensor_ops *ops; + const struct st_thermal_compat_data *cdata; + struct clk *clk; + struct regmap *regmap; + struct regmap_field *pwr; + struct regmap_field *dcorrect; + struct regmap_field *overflow; + struct regmap_field *temp_data; + struct regmap_field *int_thresh_hi; + struct regmap_field *int_enable; + int irq; + void __iomem *mmio_base; +}; + +extern int st_thermal_register(struct platform_device *pdev, + const struct of_device_id *st_thermal_of_match); +extern int st_thermal_unregister(struct platform_device *pdev); +extern const struct dev_pm_ops st_thermal_pm_ops; + +#endif /* __STI_RESET_SYSCFG_H */ diff --git a/drivers/thermal/st/st_thermal_memmap.c b/drivers/thermal/st/st_thermal_memmap.c new file mode 100644 index 000000000000..39896ce2ee00 --- /dev/null +++ b/drivers/thermal/st/st_thermal_memmap.c @@ -0,0 +1,209 @@ +/* + * ST Thermal Sensor Driver for memory mapped sensors. + * Author: Ajit Pal Singh <ajitpal.singh@st.com> + * + * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/of.h> +#include <linux/module.h> + +#include "st_thermal.h" + +#define STIH416_MPE_CONF 0x0 +#define STIH416_MPE_STATUS 0x4 +#define STIH416_MPE_INT_THRESH 0x8 +#define STIH416_MPE_INT_EN 0xC + +/* Power control bits for the memory mapped thermal sensor */ +#define THERMAL_PDN BIT(4) +#define THERMAL_SRSTN BIT(10) + +static const struct reg_field st_mmap_thermal_regfields[MAX_REGFIELDS] = { + /* + * According to the STIH416 MPE temp sensor data sheet - + * the PDN (Power Down Bit) and SRSTN (Soft Reset Bit) need to be + * written simultaneously for powering on and off the temperature + * sensor. regmap_update_bits() will be used to update the register. + */ + [INT_THRESH_HI] = REG_FIELD(STIH416_MPE_INT_THRESH, 0, 7), |