Merge tag 'gpio-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.1 development cycle:

   - A new GPIO hogging mechanism has been added.  This can be used on
     boards that want to drive some GPIO line high, low, or set it as
     input on boot and then never touch it again.  For some embedded
     systems this is bliss and simplifies things to a great extent.

   - Some API cleanup and closure: gpiod_get_array() and
     gpiod_put_array() has been added to get and put GPIOs in bulk as
     was possible with the non-descriptor API.

   - Encapsulate cross-calls to the pin control subsystem in
     <linux/gpio/driver.h>.  Now this should be the only header any GPIO
     driver needs to include or something is wrong.  Cleanups
     restricting drivers to this include are welcomed if tested.

   - Sort the GPIO Kconfig and split it into submenus, as it was
     becoming and unstructured, illogical and unnavigatable mess.  I
     hope this is easier to follow.  Menus that require a certain
     subsystem like I2C can now be hidden nicely for example, still
     working on others.

   - New drivers:

       - New driver for the Altera Soft GPIO.

       - The F7188x driver now handles the F71869 and F71869A variants.

       - The MIPS Loongson driver has been moved to drivers/gpio for
         consolidation and cleanup.

   - Cleanups:

       - The MAX732x is converted to use the GPIOLIB_IRQCHIP
         infrastructure.

       - The PCF857x is converted to use the GPIOLIB_IRQCHIP
         infrastructure.

       - Radical cleanup of the OMAP driver.

   - Misc:

       - Enable the DWAPB GPIO for all architectures.  This is a "hard
         IP" block from Synopsys which has started to turn up in so
         diverse architectures as X86 Quark, ARC and a slew of ARM
         systems.  So even though it's not an expander, it's generic
         enough to be available for all.

       - We add a mock GPIO on Crystalcove PMIC after a long discussion
         with Daniel Vetter et al, tracing back to the shootout at the
         kernel summit where DRM drivers and sub-componentization was
         discussed.  In this case a mock GPIO is assumed to be the best
         compromise gaining some reuse of infrastructure without making
         DRM drivers overly complex at the same time.  Let's see"

* tag 'gpio-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (62 commits)
  Revert "gpio: sch: use uapi/linux/pci_ids.h directly"
  gpio: dwapb: remove dependencies
  gpio: dwapb: enable for ARC
  gpio: removing kfree remove functionality
  gpio: mvebu: Fix mask/unmask managment per irq chip type
  gpio: split GPIO drivers in submenus
  gpio: move MFD GPIO drivers under their own comment
  gpio: move BCM Kona Kconfig option
  gpio: arrange SPI Kconfig symbols alphabetically
  gpio: arrange PCI GPIO controllers alphabetically
  gpio: arrange I2C Kconfig symbols alphabetically
  gpio: arrange Kconfig symbols alphabetically
  gpio: ich: Implement get_direction function
  gpio: use (!foo) instead of (foo == NULL)
  gpio: arizona: drop owner assignment from platform_drivers
  gpio: max7300: remove 'ret' variable
  gpio: use devm_kzalloc
  gpio: sch: use uapi/linux/pci_ids.h directly
  gpio: x-gene: fix devm_ioremap_resource() check
  gpio: loongson: Add Loongson-3A/3B GPIO driver support
  ...

45 files changed, 1952 insertions, 832 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera.txt b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
new file mode 100644
index 000000000000..12f50149e1ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
@@ -0,0 +1,43 @@
+Altera GPIO controller bindings
+
+Required properties:
+- compatible:
+  - "altr,pio-1.0"
+- reg: Physical base address and length of the controller's registers.
+- #gpio-cells : Should be 2
+  - The first cell is the gpio offset number.
+  - The second cell is reserved and is currently unused.
+- gpio-controller : Marks the device node as a GPIO controller.
+- interrupt-controller: Mark the device node as an interrupt controller
+- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
+  - The first cell is the GPIO offset number within the GPIO controller.
+- interrupts: Specify the interrupt.
+- altr,interrupt-trigger: Specifies the interrupt trigger type the GPIO
+  hardware is synthesized. This field is required if the Altera GPIO controller
+  used has IRQ enabled as the interrupt type is not software controlled,
+  but hardware synthesized. Required if GPIO is used as an interrupt
+  controller. The value is defined in <dt-bindings/interrupt-controller/irq.h>
+  Only the following flags are supported:
+    IRQ_TYPE_EDGE_RISING
+    IRQ_TYPE_EDGE_FALLING
+    IRQ_TYPE_EDGE_BOTH
+    IRQ_TYPE_LEVEL_HIGH
+
+Optional properties:
+- altr,ngpio: Width of the GPIO bank. This defines how many pins the
+  GPIO device has. Ranges between 1-32. Optional and defaults to 32 if not
+  specified.
+
+Example:
+
+gpio_altr: gpio@0xff200000 {
+	compatible = "altr,pio-1.0";
+	reg = <0xff200000 0x10>;
+	interrupts = <0 45 4>;
+	altr,ngpio = <32>;
+	altr,interrupt-trigger = <IRQ_TYPE_EDGE_RISING>;
+	#gpio-cells = <2>;
+	gpio-controller;
+	#interrupt-cells = <1>;
+	interrupt-controller;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index f7a158d85862..5788d5cf1252 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -116,6 +116,29 @@ Every GPIO controller node must contain both an empty "gpio-controller"
 property, and a #gpio-cells integer property, which indicates the number of
 cells in a gpio-specifier.
 
+The GPIO chip may contain GPIO hog definitions. GPIO hogging is a mechanism
+providing automatic GPIO request and configuration as part of the
+gpio-controller's driver probe function.
+
+Each GPIO hog definition is represented as a child node of the GPIO controller.
+Required properties:
+- gpio-hog:   A property specifying that this child node represent a GPIO hog.
+- gpios:      Store the GPIO information (id, flags, ...). Shall contain the
+	      number of cells specified in its parent node (GPIO controller
+	      node).
+Only one of the following properties scanned in the order shown below.
+This means that when multiple properties are present they will be searched
+in the order presented below and the first match is taken as the intended
+configuration.
+- input:      A property specifying to set the GPIO direction as input.
+- output-low  A property specifying to set the GPIO direction as output with
+	      the value low.
+- output-high A property specifying to set the GPIO direction as output with
+	      the value high.
+
+Optional properties:
+- line-name:  The GPIO label name. If not present the node name is used.
+
 Example of two SOC GPIO banks defined as gpio-controller nodes:
 
 	qe_pio_a: gpio-controller@1400 {
@@ -123,6 +146,13 @@ Example of two SOC GPIO banks defined as gpio-controller nodes:
 		reg = <0x1400 0x18>;
 		gpio-controller;
 		#gpio-cells = <2>;
+
+		line_b {
+			gpio-hog;
+			gpios = <6 0>;
+			output-low;
+			line-name = "foo-bar-gpio";
+		};
 	};
 
 	qe_pio_e: gpio-controller@1460 {
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
index 67a2e4e414a5..98d198396956 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -12,7 +12,7 @@ Required properties:
   gpio_mux.
 - interrupt-names : Should be the names of irq resources. Each interrupt
   uses its own interrupt name, so there should be as many interrupt names
-  as referenced interrups.
+  as referenced interrupts.
 - interrupt-controller : Identifies the node as an interrupt controller.
 - #interrupt-cells: Specifies the number of cells needed to encode an
   interrupt source.
diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
index d85fbae451ea..c21c1313f09e 100644
--- a/Documentation/gpio/consumer.txt
+++ b/Documentation/gpio/consumer.txt
@@ -58,7 +58,6 @@ pattern where a GPIO is optional, the gpiod_get_optional() and
 gpiod_get_index_optional() functions can be used. These functions return NULL
 instead of -ENOENT if no GPIO has been assigned to the requested function:
 
-
 	struct gpio_desc *gpiod_get_optional(struct device *dev,
 					     const char *con_id,
 					     enum gpiod_flags flags)
@@ -68,6 +67,27 @@ instead of -ENOENT if no GPIO has been assigned to the requested function:
 						   unsigned int index,
 						   enum gpiod_flags flags)
 
+For a function using multiple GPIOs all of those can be obtained with one call:
+
+	struct gpio_descs *gpiod_get_array(struct device *dev,
+					   const char *con_id,
+					   enum gpiod_flags flags)
+
+This function returns a struct gpio_descs which contains an array of
+descriptors:
+
+	struct gpio_descs {
+		unsigned int ndescs;
+		struct gpio_desc *desc[];
+	}
+
+The following function returns NULL instead of -ENOENT if no GPIOs have been
+assigned to the requested function:
+
+	struct gpio_descs *gpiod_get_array_optional(struct device *dev,
+						    const char *con_id,
+						    enum gpiod_flags flags)
+
 Device-managed variants of these functions are also defined:
 
 	struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id,
@@ -82,20 +102,37 @@ Device-managed variants of these functions are also defined:
 						  const char *con_id,
 						  enum gpiod_flags flags)
 
-	struct gpio_desc * devm_gpiod_get_index_optional(struct device *dev,
+	struct gpio_desc *devm_gpiod_get_index_optional(struct device *dev,
 							const char *con_id,
 							unsigned int index,
 							enum gpiod_flags flags)
 
+	struct gpio_descs *devm_gpiod_get_array(struct device *dev,
+						const char *con_id,
+						enum gpiod_flags flags)
+
+	struct gpio_descs *devm_gpiod_get_array_optional(struct device *dev,
+							 const char *con_id,
+							 enum gpiod_flags flags)
+
 A GPIO descriptor can be disposed of using the gpiod_put() function:
 
 	void gpiod_put(struct gpio_desc *desc)
 
-It is strictly forbidden to use a descriptor after calling this function. The
-device-managed variant is, unsurprisingly:
+For an array of GPIOs this function can be used:
+
+	void gpiod_put_array(struct gpio_descs *descs)
+
+It is strictly forbidden to use a descriptor after calling these functions.
+It is also not allowed to individually release descriptors (using gpiod_put())
+from an array acquired with gpiod_get_array().
+
+The device-managed variants are, unsurprisingly:
 
 	void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
 
+	void devm_gpiod_put_array(struct device *dev, struct gpio_descs *descs)
+
 
 Using GPIOs
 ===========
@@ -222,6 +259,26 @@ GPIOs belonging to the same bank or chip simultaneously if supported by the
 corresponding chip driver. In that case a significantly improved performance
 can be expected. If simultaneous setting is not possible the GPIOs will be set
 sequentially.
+
+The gpiod_set_array() functions take three arguments:
+	* array_size	- the number of array elements
+	* desc_array	- an array of GPIO descriptors
+	* value_array	- an array of values to assign to the GPIOs
+
+The descriptor array can be obtained using the gpiod_get_array() function
+or one of its variants. If the group of descriptors returned by that function
+matches the desired group of GPIOs, those GPIOs can be set by simply using
+the struct gpio_descs returned by gpiod_get_array():
+
+	struct gpio_descs *my_gpio_descs = gpiod_get_array(...);
+	gpiod_set_array(my_gpio_descs->ndescs, my_gpio_descs->desc,
+			my_gpio_values);
+
+It is also possible to set a completely arbitrary array of descriptors. The
+descriptors may be obtained using any combination of gpiod_get() and
+gpiod_get_array(). Afterwards the array of descriptors has to be setup
+manually before it can be used with gpiod_set_array().
+
 Note that for optimal performance GPIOs belonging to the same chip should be
 contiguous within the array of descriptors.
 
diff --git a/MAINTAINERS b/MAINTAINERS
index f7bbaece5649..f71079b8825c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -569,6 +569,12 @@ L:	nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/mailbox/mailbox-altera.c
 
+ALTERA PIO DRIVER
+M:	Tien Hock Loh <thloh@altera.com>
+L:	linux-gpio@vger.kernel.org
+S:	Maintained
+F:	drivers/gpio/gpio-altera.c
+
 ALTERA TRIPLE SPEED ETHERNET DRIVER
 M:	Vince Bridgers <vbridger@opensource.altera.com>
 L:	netdev@vger.kernel.org
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2198837c256f..f5016656494f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1288,6 +1288,7 @@ config CPU_LOONGSON3
 	select CPU_SUPPORTS_HUGEPAGES
 	select WEAK_ORDERING
 	select WEAK_REORDERING_BEYOND_LLSC
+	select ARCH_REQUIRE_GPIOLIB
 	help
 		The Loongson 3 processor implements the MIPS64R2 instruction
 		set with many extensions.
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index e51aad9a94b1..0cbc9863c7c8 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -171,6 +171,7 @@ CONFIG_SERIAL_8250_FOURPORT=y
 CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_HW_RANDOM=y
 CONFIG_RTC=y
+CONFIG_GPIO_LOONGSON=y
 CONFIG_THERMAL=y
 CONFIG_MEDIA_SUPPORT=m
 CONFIG_VIDEO_DEV=m
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 7eabcd2031ea..c8442997477b 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -243,6 +243,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_RAW_DRIVER=m
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_PIIX4=y
+CONFIG_GPIO_LOONGSON=y
 CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_LM93=m
 CONFIG_SENSORS_W83627HF=m
diff --git a/arch/mips/include/asm/mach-loongson/gpio.h b/arch/mips/include/asm/mach-loongson/gpio.h
index 211a7b7138fe..b3b216904a9a 100644
--- a/arch/mips/include/asm/mach-loongson/gpio.h
+++ b/arch/mips/include/asm/mach-loongson/gpio.h
@@ -1,8 +1,9 @@
 /*
- * STLS2F GPIO Support
+ * Loongson GPIO Support
  *
  * Copyright (c) 2008  Richard Liu, STMicroelectronics <richard.liu@st.com>
  * Copyright (c) 2008-2010  Arnaud Patard <apatard@mandriva.com>
+ * Copyright (c) 2014  Huacai Chen <chenhc@lemote.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -10,14 +11,14 @@
  * (at your option) any later version.
  */
 
-#ifndef __STLS2F_GPIO_H
-#define __STLS2F_GPIO_H
+#ifndef __LOONGSON_GPIO_H
+#define __LOONGSON_GPIO_H
 
 #include <asm-generic/gpio.h>
 
-extern void gpio_set_value(unsigned gpio, int value);
-extern int gpio_get_value(unsigned gpio);
-extern int gpio_cansleep(unsigned gpio);
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
 
 /* The chip can do interrupt
  * but it has not been tested and doc not clear
@@ -32,4 +33,4 @@ static inline int irq_to_gpio(int gpio)
 	return -EINVAL;
 }
 
-#endif				/* __STLS2F_GPIO_H */
+#endif	/* __LOONGSON_GPIO_H */
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
index d87e03330b29..e70c33fdb881 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson/common/Makefile
@@ -4,7 +4,6 @@
 
 obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
     bonito-irq.o mem.o machtype.o platform.o
-obj-$(CONFIG_GPIOLIB) += gpio.o
 obj-$(CONFIG_PCI) += pci.o
 
 #
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index dc1aaa83a347..38d875d0e4c8 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -90,27 +90,11 @@ config GPIO_GENERIC
 
 # put drivers in the right section, in alphabetical order
 
-config GPIO_DA9052
-	tristate "Dialog DA9052 GPIO"
-	depends on PMIC_DA9052
-	help
-	  Say yes here to enable the GPIO driver for the DA9052 chip.
-
-config GPIO_DA9055
-	tristate "Dialog Semiconductor DA9055 GPIO"
-	depends on MFD_DA9055
-	help
-	  Say yes here to enable the GPIO driver for the DA9055 chip.
-
-	  The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
-	  be controller by this driver.
-
-	  If driver is built as a module it will be called gpio-da9055.
-
+# This symbol is selected by both I2C and SPI expanders
 config GPIO_MAX730X
 	tristate
 
-comment "Memory mapped GPIO drivers:"
+menu "Memory mapped GPIO drivers"
 
 config GPIO_74XX_MMIO
 	tristate "GPIO driver for 74xx-ICs with MMIO access"
@@ -126,6 +110,22 @@ config GPIO_74XX_MMIO
 	    8 bits:	74244 (Input), 74273 (Output)
 	    16 bits:	741624 (Input), 7416374 (Output)
 
+config GPIO_ALTERA
+	tristate "Altera GPIO"
+	depends on OF_GPIO
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Say Y or M here to build support for the Altera PIO device.
+
+	  If driver is built as a module it will be called gpio-altera.
+
+config GPIO_BCM_KONA
+	bool "Broadcom Kona GPIO"
+	depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
+	help
+	  Turn on GPIO support for Broadcom "Kona" chips.
+
 config GPIO_CLPS711X
 	tristate "CLPS711X GPIO support"
 	depends on ARCH_CLPS711X || COMPILE_TEST
@@ -140,28 +140,14 @@ config GPIO_DAVINCI
 	help
 	  Say yes here to enable GPIO support for TI Davinci/Keystone SoCs.
 
-config GPIO_GENERIC_PLATFORM
-	tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
-	select GPIO_GENERIC
-	help
-	  Say yes here to support basic platform_device memory-mapped GPIO controllers.
-
 config GPIO_DWAPB
 	tristate "Synopsys DesignWare APB GPIO driver"
-	depends on ARM
-	depends on OF_GPIO
 	select GPIO_GENERIC
 	select GENERIC_IRQ_CHIP
 	help
 	  Say Y or M here to build support for the Synopsys DesignWare APB
 	  GPIO block.
 
-config GPIO_IT8761E
-	tristate "IT8761E GPIO support"
-	depends on X86  # unconditional access to IO space.
-	help
-	  Say yes here to support GPIO functionality of IT8761E super I/O chip.
-
 config GPIO_EM
 	tristate "Emma Mobile GPIO"
 	depends on ARM && OF_GPIO
@@ -173,36 +159,99 @@ config GPIO_EP93XX
 	depends on ARCH_EP93XX
 	select GPIO_GENERIC
 
-config GPIO_ZEVIO
-	bool "LSI ZEVIO SoC memory mapped GPIOs"
-	depends on ARM && OF_GPIO
-	help
-	  Say yes here to support the GPIO controller in LSI ZEVIO SoCs.
-
-config GPIO_MM_LANTIQ
-	bool "Lantiq Memory mapped GPIOs"
-	depends on LANTIQ && SOC_XWAY
-	help
-	  This enables support for memory mapped GPIOs on the External Bus Unit
-	  (EBU) found on Lantiq SoCs. The gpios are output only as they are
-	  created by attaching a 16bit latch to the bus.
-
 config GPIO_F7188X
-	tristate "F71882FG and F71889F GPIO support"
+	tristate "F71869, F71869A, F71882FG and F71889F GPIO support"
 	depends on X86
 	help
 	  This option enables support for GPIOs found on Fintek Super-I/O
-	  chips F71882FG and F71889F.
+	  chips F71869, F71869A, F71882FG and F71889F.
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called f7188x-gpio.
 
+config GPIO_GE_FPGA
+	bool "GE FPGA based GPIO"
+	depends on GE_FPGA
+	select GPIO_GENERIC
+	help
+	  Support for common GPIO functionality provided on some GE Single Board
+	  Computers.
+
+	  This driver provides basic support (configure as input or output, read
+	  and write pin state) for GPIO implemented in a number of GE single
+	  board computers.
+
+config GPIO_GENERIC_PLATFORM
+	tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
+	select GPIO_GENERIC
+	help
+	  Say yes here to support basic platform_device memory-mapped GPIO controllers.
+
+config GPIO_GRGPIO
+	tristate "Aeroflex Gaisler GRGPIO support"
+	depends on OF
+	select GPIO_GENERIC
+	select IRQ_DOMAIN
+	help
+	  Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
+	  VHDL IP core library.
+
+config GPIO_ICH
+	tristate "Intel ICH GPIO"
+	depends on PCI && X86
+	select MFD_CORE
+	select LPC_ICH
+	help
+	  Say yes here to support the GPIO functionality of a number of Intel
+	  ICH-based chipsets.  Currently supported devices: ICH6, ICH7, ICH8
+	  ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
+	  Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).
+
+	  If unsure, say N.
+
+config GPIO_IOP
+	tristate "Intel IOP GPIO"
+	depends on ARM && (ARCH_IOP32X || ARCH_IOP33X)
+	help
+	  Say yes here to support the GPIO functionality of a number of Intel
+	  IOP32X or IOP33X.
+
+	  If unsure, say N.
+
+config GPIO_IT8761E
+	tristate "IT8761E GPIO support"
+	depends on X86  # unconditional access to IO space.
+	help
+	  Say yes here to support GPIO functionality of IT8761E super I/O chip.
+
+config GPIO_LOONGSON
+	bool "Loongson-2/3 GPIO support"
+	depends on CPU_LOONGSON2 || CPU_LOONGSON3
+	help
+	  driver for GPIO functionality on Loongson-2F/3A/3B processors.
+
+config GPIO_LYNXPOINT
+	tristate "Intel Lynxpoint GPIO support"
+	depends on ACPI && X86
+	select GPIOLIB_IRQCHIP
+	help
+	  driver for GPIO functionality on Intel Lynxpoint PCH chipset
+	  Requires ACPI device enumeration code to set up a platform device.
+
 config GPIO_MB86S7X
 	bool "GPIO support for Fujitsu MB86S7x Platforms"
 	depends on ARCH_MB86S7X
 	help
 	  Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs.
 
+config GPIO_MM_LANTIQ
+	bool "Lantiq Memory mapped GPIOs"
+	depends on LANTIQ && SOC_XWAY
+	help
+	  This enables support for memory mapped GPIOs on the External Bus Unit
+	  (EBU) found on Lantiq SoCs. The gpios are output only as they are
+	  created by attaching a 16bit latch to the bus.
+
 config GPIO_MOXART
 	bool "MOXART GPIO support"
 	depends on ARCH_MOXART
@@ -303,6 +352,33 @@ config GPIO_SAMSUNG
 	  Legacy GPIO support. Use only for platforms without support for
 	  pinctrl.
 
+config GPIO_SCH
+	tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"
+	depends on PCI && X86
+	select MFD_CORE
+	select LPC_SCH
+	help
+	  Say yes here to support GPIO interface on Intel Poulsbo SCH,
+	  Intel Tunnel Creek processor, Intel Centerton processor or
+	  Intel Quark X1000 SoC.
+
+	  The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
+	  powered by the core power rail and are turned off during sleep
+	  modes (S3 and higher). The remaining four GPIOs are powered by
+	  the Intel SCH suspend power supply. These GPIOs remain
+	  active during S3. The suspend powered GPIOs can be used to wake the
+	  system from the Suspend-to-RAM state.
+
+	  The Intel Tunnel Creek processor has 5 GPIOs powered by the
+	  core power rail and 9 from suspend power supply.
+
+	  The Intel Centerton processor has a total of 30 GPIO pins.
+	  Twenty-one are powered by the core power rail and 9 from the
+	  suspend power supply.
+
+	  The Intel Quark X1000 SoC has 2 GPIOs powered by the core
+	  power well and 6 from the suspend power well.
+
 config GPIO_SCH311X
 	tristate "SMSC SCH311x SuperI/O GPIO"
 	help
@@ -327,12 +403,27 @@ config GPIO_STA2X11
 	  Say yes here to support the STA2x11/ConneXt GPIO device.
 	  The GPIO module has 128 GPIO pins with alternate functions.
 
+config GPIO_STP_XWAY
+	bool "XWAY STP GPIOs"
+	depends on SOC_XWAY
+	help
+	  This enables support for the Serial To Parallel (STP) unit found on
+	  XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
+	  that can be up to 24 bit. This peripheral is aimed at driving leds.
+	  Some of the gpios/leds can be auto updated by the soc with dsl and
+	  phy status.
+
 config GPIO_SYSCON
 	tristate "GPIO based on SYSCON"
 	depends on MFD_SYSCON && OF
 	help
 	  Say yes here to support GPIO functionality though SYSCON driver.
 
+config GPIO_TB10X
+	bool
+	select GENERIC_IRQ_CHIP
+	select OF_GPIO
+
 config GPIO_TS5500
 	tristate "TS-5500 DIO blocks and compatibles"
 	depends on TS5500 || COMPILE_TEST
@@ -364,6 +455,24 @@ config GPIO_VF610
 	help
 	  Say yes here to support Vybrid vf610 GPIOs.
 
+config GPIO_VR41XX
+	tristate "NEC VR4100 series General-purpose I/O Uint support"
+	depends on CPU_VR41XX
+	help
+	  Say yes here to support the NEC VR4100 series General-purpose I/O Uint
+
+config GPIO_VX855
+	tristate "VIA VX855/VX875 GPIO"
+	depends on PCI
+	select MFD_CORE
+	select MFD_VX855
+	help
+	  Support access to the VX855/VX875 GPIO lines through the gpio library.
+
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
 config GPIO_XGENE
 	bool "APM X-Gene GPIO controller support"
 	depends on ARM64 && OF_GPIO
@@ -387,13 +496,6 @@ config GPIO_XILINX
 	help
 	  Say yes here to support the Xilinx FPGA GPIO device
 
-config GPIO_ZYNQ
-	tristate "Xilinx Zynq GPIO support"
-	depends on ARCH_ZYNQ
-	select GPIOLIB_IRQCHIP
-	help
-	  Say yes here to support Xilinx Zynq GPIO controller.
-
 config GPIO_XTENSA
 	bool "Xtensa GPIO32 support"
 	depends on XTENSA
@@ -403,135 +505,49 @@ config GPIO_XTENSA
 	  Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input)
 	  and EXPSTATE (output) ports
 
-config GPIO_VR41XX
-	tristate "NEC VR4100 series General-purpose I/O Uint support"
-	depends on CPU_VR41XX
-	help
-	  Say yes here