Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - update the ili210x touchscreen driver, refreshing the code and adding
   support for ILI251X line

 - add support for st1633 to the st1232 touchscreen driver

 - add support for sx8650 to the the sx8654 touchscreen driver

 - add support for Evervision FT5726 to the edt-ft5x06 touchscreen
   driver

 - add support for gt5688 to the Goodix touchscreen driver

 - new vibrator driver for MSM SOCs

 - miscellaneous fixes for the rest of input drivers

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits)
  Input: wacom_serial4 - add support for Wacom ArtPad II tablet
  Input: elan_i2c - add id for touchpad found in Lenovo s21e-20
  Input: raspberrypi-ts - select CONFIG_INPUT_POLLDEV
  Input: msm-vibrator - use correct gpio header
  Input: ti_am335x_tsc - remove set but not used variable 'tscadc_dev'
  Input: i8042 - rework DT node name comparisons
  Input: goodix - print values in case of inconsistencies
  Input: goodix - refer to touchscreen.txt in device tree bindings
  Input: goodix - support Goodix gt5688
  Input: synaptics_i2c - remove redundant spinlock
  Input: db9 - mark expected switch fall-through
  Input: qt2160 - remove redundant spinlock
  Input: st1232 - handle common DT bindings
  Input: ims-pcu - switch to using brightness_set_blocking()
  Input: st1232 - switch to gpiod API
  Input: ili210x - fetch touchscreen geometry from DT
  Input: msm-vibrator - tweak an error message
  Input: tm2-touchkey - acknowledge that setting brightness is a blocking call
  Input: stmfts - acknowledge that setting brightness is a blocking call
  Input: ili210x - switch to using devm_device_add_group()
  ...

33 files changed, 1207 insertions, 367 deletions

diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
index 0c252d9306da..ef2ae729718f 100644
--- a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
+++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
@@ -1,13 +1,19 @@
 Samsung tm2-touchkey
 
 Required properties:
-- compatible: must be "cypress,tm2-touchkey"
+- compatible:
+    * "cypress,tm2-touchkey" - for the touchkey found on the tm2 board
+    * "cypress,midas-touchkey" - for the touchkey found on midas boards
+    * "cypress,aries-touchkey" - for the touchkey found on aries boards
 - reg: I2C address of the chip.
 - interrupts: interrupt to which the chip is connected (see interrupt
 	binding[0]).
 - vcc-supply : internal regulator output. 1.8V
 - vdd-supply : power supply for IC 3.3V
 
+Optional properties:
+- linux,keycodes: array of keycodes (max 4), default KEY_PHONE and KEY_BACK
+
 [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 
 Example:
@@ -21,5 +27,6 @@ Example:
 			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 			vcc-supply=<&ldo32_reg>;
 			vdd-supply=<&ldo33_reg>;
+			linux,keycodes = <KEY_PHONE KEY_BACK>;
 		};
 	};
diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
new file mode 100644
index 000000000000..b2a76301e632
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
@@ -0,0 +1,25 @@
+Ilitek ILI210x/ILI251x touchscreen controller
+
+Required properties:
+- compatible:
+    ilitek,ili210x for ILI210x
+    ilitek,ili251x for ILI251x
+
+- reg: The I2C address of the device
+
+- interrupts: The sink for the touchscreen's IRQ output
+    See ../interrupt-controller/interrupts.txt
+
+Optional properties for main touchpad device:
+
+- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
+
+Example:
+
+	touchscreen@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+	};
diff --git a/Documentation/devicetree/bindings/input/msm-vibrator.txt b/Documentation/devicetree/bindings/input/msm-vibrator.txt
new file mode 100644
index 000000000000..8dcf014ef2e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/msm-vibrator.txt
@@ -0,0 +1,36 @@
+* Device tree bindings for the Qualcomm MSM vibrator
+
+Required properties:
+
+  - compatible: Should be one of
+		"qcom,msm8226-vibrator"
+		"qcom,msm8974-vibrator"
+  - reg: the base address and length of the IO memory for the registers.
+  - pinctrl-names: set to default.
+  - pinctrl-0: phandles pointing to pin configuration nodes. See
+               Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+  - clock-names: set to pwm
+  - clocks: phandle of the clock. See
+            Documentation/devicetree/bindings/clock/clock-bindings.txt
+  - enable-gpios: GPIO that enables the vibrator.
+
+Optional properties:
+
+  - vcc-supply: phandle to the regulator that provides power to the sensor.
+
+Example from a LG Nexus 5 (hammerhead) phone:
+
+vibrator@fd8c3450 {
+	reg = <0xfd8c3450 0x400>;
+	compatible = "qcom,msm8974-vibrator";
+
+	vcc-supply = <&pm8941_l19>;
+
+	clocks = <&mmcc CAMSS_GP1_CLK>;
+	clock-names = "pwm";
+
+	enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&vibrator_pin>;
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
index da2dc5d6c98b..870b8c5cce9b 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
@@ -1,11 +1,12 @@
 FocalTech EDT-FT5x06 Polytouch driver
 =====================================
 
-There are 3 variants of the chip for various touch panel sizes
+There are 5 variants of the chip for various touch panel sizes
 FT5206GE1  2.8" .. 3.8"
 FT5306DE4  4.3" .. 7"
 FT5406EE8  7"   .. 8.9"
 FT5506EEG  7"   .. 8.9"
+FT5726NEI  5.7” .. 11.6"
 
 The software interface is identical for all those chips, so that
 currently there is no need for the driver to distinguish between the
@@ -19,6 +20,7 @@ Required properties:
            or:  "edt,edt-ft5306"
            or:  "edt,edt-ft5406"
            or:  "edt,edt-ft5506"
+           or:  "evervision,ev-ft5726"
            or:  "focaltech,ft6236"
 
  - reg:         I2C slave address of the chip (0x38)
@@ -42,6 +44,15 @@ Optional properties:
 
  - offset:      allows setting the edge compensation in the range from
                 0 to 31.
+
+ - offset-x:    Same as offset, but applies only to the horizontal position.
+                Range from 0 to 80, only supported by evervision,ev-ft5726
+                devices.
+
+ - offset-y:    Same as offset, but applies only to the vertical position.
+                Range from 0 to 80, only supported by evervision,ev-ft5726
+                devices.
+
  - touchscreen-size-x	   : See touchscreen.txt
  - touchscreen-size-y	   : See touchscreen.txt
  - touchscreen-fuzz-x      : See touchscreen.txt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
index f7e95c52f3c7..8cf0b4d38a7e 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
@@ -3,6 +3,7 @@ Device tree bindings for Goodix GT9xx series touchscreen controller
 Required properties:
 
  - compatible		: Should be "goodix,gt1151"
+				 or "goodix,gt5688"
 				 or "goodix,gt911"
 				 or "goodix,gt9110"
 				 or "goodix,gt912"
@@ -18,11 +19,14 @@ Optional properties:
  - irq-gpios		: GPIO pin used for IRQ. The driver uses the
 			  interrupt gpio pin as output to reset the device.
  - reset-gpios		: GPIO pin used for reset
-
- - touchscreen-inverted-x  : X axis is inverted (boolean)
- - touchscreen-inverted-y  : Y axis is inverted (boolean)
- - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
-                             (swapping is done after inverting the axis)
+ - touchscreen-inverted-x
+ - touchscreen-inverted-y
+ - touchscreen-size-x
+ - touchscreen-size-y
+ - touchscreen-swapped-x-y
+
+The touchscreen-* properties are documented in touchscreen.txt in this
+directory.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
index 64ad48b824a2..019373253b28 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
@@ -1,13 +1,17 @@
-* Sitronix st1232 touchscreen controller
+* Sitronix st1232 or st1633 touchscreen controller
 
 Required properties:
-- compatible: must be "sitronix,st1232"
+- compatible: must contain one of
+  * "sitronix,st1232"
+  * "sitronix,st1633"
 - reg: I2C address of the chip
 - interrupts: interrupt to which the chip is connected
 
 Optional properties:
 - gpios: a phandle to the reset GPIO
 
+For additional optional properties see: touchscreen.txt
+
 Example:
 
 	i2c@00000000 {
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
index 4886c4aa2906..0ebe6dd043c7 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -1,10 +1,17 @@
 * Semtech SX8654 I2C Touchscreen Controller
 
 Required properties:
-- compatible: must be "semtech,sx8654"
+- compatible: must be one of the following, depending on the model:
+	"semtech,sx8650"
+	"semtech,sx8654"
+	"semtech,sx8655"
+	"semtech,sx8656"
 - reg: i2c slave address
 - interrupts: touch controller interrupt
 
+Optional properties:
+ - reset-gpios: GPIO specification for the NRST input
+
 Example:
 
 	sx8654@48 {
@@ -12,4 +19,5 @@ Example:
 		reg = <0x48>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
 	};
diff --git a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c
index 804b1b80a8be..5a52b65bef9a 100644
--- a/drivers/input/joystick/db9.c
+++ b/drivers/input/joystick/db9.c
@@ -259,7 +259,7 @@ static unsigned char db9_saturn_read_packet(struct parport *port, unsigned char
 			db9_saturn_write_sub(port, type, 3, powered, 0);
 			return data[0] = 0xe3;
 		}
-		/* else: fall through */
+		/* fall through */
 	default:
 		return data[0];
 	}
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 492a971b95b5..6cd199e8a370 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -1015,8 +1015,18 @@ static int __maybe_unused gpio_keys_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(gpio_keys_pm_ops, gpio_keys_suspend, gpio_keys_resume);
 
+static void gpio_keys_shutdown(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = gpio_keys_suspend(&pdev->dev);
+	if (ret)
+		dev_err(&pdev->dev, "failed to shutdown\n");
+}
+
 static struct platform_driver gpio_keys_device_driver = {
 	.probe		= gpio_keys_probe,
+	.shutdown	= gpio_keys_shutdown,
 	.driver		= {
 		.name	= "gpio-keys",
 		.pm	= &gpio_keys_pm_ops,
diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c
index be56d4f262a7..b132662201a4 100644
--- a/drivers/input/keyboard/mcs_touchkey.c
+++ b/drivers/input/keyboard/mcs_touchkey.c
@@ -113,9 +113,8 @@ static int mcs_touchkey_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	data = kzalloc(sizeof(struct mcs_touchkey_data) +
-			sizeof(data->keycodes[0]) * (pdata->key_maxval + 1),
-			GFP_KERNEL);
+	data = kzalloc(struct_size(data, keycodes, pdata->key_maxval + 1),
+		       GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!data || !input_dev) {
 		dev_err(&client->dev, "Failed to allocate memory\n");
diff --git a/drivers/input/keyboard/mtk-pmic-keys.c b/drivers/input/keyboard/mtk-pmic-keys.c
index 02c67a1749fc..8e6ebab05ab4 100644
--- a/drivers/input/keyboard/mtk-pmic-keys.c
+++ b/drivers/input/keyboard/mtk-pmic-keys.c
@@ -14,18 +14,17 @@
  *
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
-#include <linux/platform_device.h>
 #include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/regmap.h>
 #include <linux/mfd/mt6323/registers.h>
-#include <linux/mfd/mt6397/registers.h>
 #include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6397/registers.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
 
 #define MTK_PMIC_PWRKEY_RST_EN_MASK	0x1
 #define MTK_PMIC_PWRKEY_RST_EN_SHIFT	6
diff --git a/drivers/input/keyboard/qt2160.c b/drivers/input/keyboard/qt2160.c
index d466bc07aebb..6a43895b28e7 100644
--- a/drivers/input/keyboard/qt2160.c
+++ b/drivers/input/keyboard/qt2160.c
@@ -68,7 +68,6 @@ struct qt2160_data {
 	struct i2c_client *client;
 	struct input_dev *input;
 	struct delayed_work dwork;
-	spinlock_t lock;        /* Protects canceling/rescheduling of dwork */
 	unsigned short keycodes[ARRAY_SIZE(qt2160_key2code)];
 	u16 key_matrix;
 #ifdef CONFIG_LEDS_CLASS
@@ -212,22 +211,15 @@ static int qt2160_get_key_matrix(struct qt2160_data *qt2160)
 static irqreturn_t qt2160_irq(int irq, void *_qt2160)
 {
 	struct qt2160_data *qt2160 = _qt2160;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qt2160->lock, flags);
 
 	mod_delayed_work(system_wq, &qt2160->dwork, 0);
 
-	spin_unlock_irqrestore(&qt2160->lock, flags);
-
 	return IRQ_HANDLED;
 }
 
 static void qt2160_schedule_read(struct qt2160_data *qt2160)
 {
-	spin_lock_irq(&qt2160->lock);
 	schedule_delayed_work(&qt2160->dwork, QT2160_CYCLE_INTERVAL);
-	spin_unlock_irq(&qt2160->lock);
 }
 
 static void qt2160_worker(struct work_struct *work)
@@ -391,7 +383,6 @@ static int qt2160_probe(struct i2c_client *client,
 	qt2160->client = client;
 	qt2160->input = input;
 	INIT_DELAYED_WORK(&qt2160->dwork, qt2160_worker);
-	spin_lock_init(&qt2160->lock);
 
 	input->name = "AT42QT2160 Touch Sense Keyboard";
 	input->id.bustype = BUS_I2C;
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
index dc983ab6c0ad..cdeef180aead 100644
--- a/drivers/input/keyboard/tca6416-keypad.c
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -219,9 +219,7 @@ static int tca6416_keypad_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	chip = kzalloc(sizeof(struct tca6416_keypad_chip) +
-		       pdata->nbuttons * sizeof(struct tca6416_button),
-		       GFP_KERNEL);
+	chip = kzalloc(struct_size(chip, buttons, pdata->nbuttons), GFP_KERNEL);
 	input = input_allocate_device();
 	if (!chip || !input) {
 		error = -ENOMEM;
diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c
index abc266e40e17..d4455f3a5cf1 100644
--- a/drivers/input/keyboard/tm2-touchkey.c
+++ b/drivers/input/keyboard/tm2-touchkey.c
@@ -22,12 +22,14 @@
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/pm.h>
 #include <linux/regulator/consumer.h>
 
 #define TM2_TOUCHKEY_DEV_NAME		"tm2-touchkey"
-#define TM2_TOUCHKEY_KEYCODE_REG	0x03
-#define TM2_TOUCHKEY_BASE_REG		0x00
+
+#define ARIES_TOUCHKEY_CMD_LED_ON	0x1
+#define ARIES_TOUCHKEY_CMD_LED_OFF	0x2
 #define TM2_TOUCHKEY_CMD_LED_ON		0x10
 #define TM2_TOUCHKEY_CMD_LED_OFF	0x20
 #define TM2_TOUCHKEY_BIT_PRESS_EV	BIT(3)
@@ -35,9 +37,13 @@
 #define TM2_TOUCHKEY_LED_VOLTAGE_MIN	2500000
 #define TM2_TOUCHKEY_LED_VOLTAGE_MAX	3300000
 
-enum {
-	TM2_TOUCHKEY_KEY_MENU = 0x1,
-	TM2_TOUCHKEY_KEY_BACK,
+struct touchkey_variant {
+	u8 keycode_reg;
+	u8 base_reg;
+	u8 cmd_led_on;
+	u8 cmd_led_off;
+	bool no_reg;
+	bool fixed_regulator;
 };
 
 struct tm2_touchkey_data {
@@ -46,9 +52,33 @@ struct tm2_touchkey_data {
 	struct led_classdev led_dev;
 	struct regulator *vdd;
 	struct regulator_bulk_data regulators[2];
+	const struct touchkey_variant *variant;
+	u32 keycodes[4];
+	int num_keycodes;
+};
+
+static const struct touchkey_variant tm2_touchkey_variant = {
+	.keycode_reg = 0x03,
+	.base_reg = 0x00,
+	.cmd_led_on = TM2_TOUCHKEY_CMD_LED_ON,
+	.cmd_led_off = TM2_TOUCHKEY_CMD_LED_OFF,
+};
+
+static const struct touchkey_variant midas_touchkey_variant = {
+	.keycode_reg = 0x00,
+	.base_reg = 0x00,
+	.cmd_led_on = TM2_TOUCHKEY_CMD_LED_ON,
+	.cmd_led_off = TM2_TOUCHKEY_CMD_LED_OFF,
 };
 
-static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
+static struct touchkey_variant aries_touchkey_variant = {
+	.no_reg = true,
+	.fixed_regulator = true,
+	.cmd_led_on = ARIES_TOUCHKEY_CMD_LED_ON,
+	.cmd_led_off = ARIES_TOUCHKEY_CMD_LED_OFF,
+};
+
+static int tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
 					    enum led_brightness brightness)
 {
 	struct tm2_touchkey_data *touchkey =
@@ -58,15 +88,19 @@ static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
 
 	if (brightness == LED_OFF) {
 		volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN;
-		data = TM2_TOUCHKEY_CMD_LED_OFF;
+		data = touchkey->variant->cmd_led_off;
 	} else {
 		volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX;
-		data = TM2_TOUCHKEY_CMD_LED_ON;
+		data = touchkey->variant->cmd_led_on;
 	}
 
-	regulator_set_voltage(touchkey->vdd, volt, volt);
-	i2c_smbus_write_byte_data(touchkey->client,
-				  TM2_TOUCHKEY_BASE_REG, data);
+	if (!touchkey->variant->fixed_regulator)
+		regulator_set_voltage(touchkey->vdd, volt, volt);
+
+	return touchkey->variant->no_reg ?
+		i2c_smbus_write_byte(touchkey->client, data) :
+		i2c_smbus_write_byte_data(touchkey->client,
+					  touchkey->variant->base_reg, data);
 }
 
 static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey)
@@ -96,49 +130,57 @@ static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
 {
 	struct tm2_touchkey_data *touchkey = devid;
 	int data;
-	int key;
-
-	data = i2c_smbus_read_byte_data(touchkey->client,
-					TM2_TOUCHKEY_KEYCODE_REG);
+	int index;
+	int i;
+
+	if (touchkey->variant->no_reg)
+		data = i2c_smbus_read_byte(touchkey->client);
+	else
+		data = i2c_smbus_read_byte_data(touchkey->client,
+						touchkey->variant->keycode_reg);
 	if (data < 0) {
 		dev_err(&touchkey->client->dev,
 			"failed to read i2c data: %d\n", data);
 		goto out;
 	}
 
-	switch (data & TM2_TOUCHKEY_BIT_KEYCODE) {
-	case TM2_TOUCHKEY_KEY_MENU:
-		key = KEY_PHONE;
-		break;
-
-	case TM2_TOUCHKEY_KEY_BACK:
-		key = KEY_BACK;
-		break;
-
-	default:
+	index = (data & TM2_TOUCHKEY_BIT_KEYCODE) - 1;
+	if (index < 0 || index >= touchkey->num_keycodes) {
 		dev_warn(&touchkey->client->dev,
-			 "unhandled keycode, data %#02x\n", data);
+			 "invalid keycode index %d\n", index);
 		goto out;
 	}
 
 	if (data & TM2_TOUCHKEY_BIT_PRESS_EV) {
-		input_report_key(touchkey->input_dev, KEY_PHONE, 0);
-		input_report_key(touchkey->input_dev, KEY_BACK, 0);
+		for (i = 0; i < touchkey->num_keycodes; i++)
+			input_report_key(touchkey->input_dev,
+					 touchkey->keycodes[i], 0);
 	} else {
-		input_report_key(touchkey->input_dev, key, 1);
+		input_report_key(touchkey->input_dev,
+				 touchkey->keycodes[index], 1);
 	}
 
 	input_sync(touchkey->input_dev);
 
 out:
+	if (touchkey->variant->fixed_regulator &&
+				data & TM2_TOUCHKEY_BIT_PRESS_EV) {
+		/* touch turns backlight on, so make sure we're in sync */
+		if (touchkey->led_dev.brightness == LED_OFF)
+			tm2_touchkey_led_brightness_set(&touchkey->led_dev,
+							LED_OFF);
+	}
+
 	return IRQ_HANDLED;
 }
 
 static int tm2_touchkey_probe(struct i2c_client *client,
 			      const struct i2c_device_id *id)
 {
+	struct device_node *np = client->dev.of_node;
 	struct tm2_touchkey_data *touchkey;
 	int error;
+	int i;
 
 	if (!i2c_check_functionality(client->adapter,
 			I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA)) {
@@ -153,6 +195,8 @@ static int tm2_touchkey_probe(struct i2c_client *client,
 	touchkey->client = client;
 	i2c_set_clientdata(client, touchkey);
 
+	touchkey->variant = of_device_get_match_data(&client->dev);
+
 	touchkey->regulators[0].supply = "vcc";
 	touchkey->regulators[1].supply = "vdd";
 	error = devm_regulator_bulk_get(&client->dev,
@@ -166,6 +210,16 @@ static int tm2_touchkey_probe(struct i2c_client *client,
 	/* Save VDD for easy access */
 	touchkey->vdd = touchkey->regulators[1].consumer;
 
+	touchkey->num_keycodes = of_property_read_variable_u32_array(np,
+					"linux,keycodes", touchkey->keycodes, 0,
+					ARRAY_SIZE(touchkey->keycodes));
+	if (touchkey->num_keycodes <= 0) {
+		/* default keycodes */
+		touchkey->keycodes[0] = KEY_PHONE;
+		touchkey->keycodes[1] = KEY_BACK;
+		touchkey->num_keycodes = 2;
+	}
+
 	error = tm2_touchkey_power_enable(touchkey);
 	if (error) {
 		dev_err(&client->dev, "failed to power up device: %d\n", error);
@@ -190,8 +244,9 @@ static int tm2_touchkey_probe(struct i2c_client *client,
 	touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME;
 	touchkey->input_dev->id.bustype = BUS_I2C;
 
-	input_set_capability(touchkey->input_dev, EV_KEY, KEY_PHONE);
-	input_set_capability(touchkey->input_dev, EV_KEY, KEY_BACK);
+	for (i = 0; i < touchkey->num_keycodes; i++)
+		input_set_capability(touchkey->input_dev, EV_KEY,
+				     touchkey->keycodes[i]);
 
 	error = input_register_device(touchkey->input_dev);
 	if (error) {
@@ -212,9 +267,10 @@ static int tm2_touchkey_probe(struct i2c_client *client,
 
 	/* led device */
 	touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME;
-	touchkey->led_dev.brightness = LED_FULL;
+	touchkey->led_dev.brightness = LED_ON;
 	touchkey->led_dev.max_brightness = LED_ON;
-	touchkey->led_dev.brightness_set = tm2_touchkey_led_brightness_set;
+	touchkey->led_dev.brightness_set_blocking =
+					tm2_touchkey_led_brightness_set;
 
 	error = devm_led_classdev_register(&client->dev, &touchkey->led_dev);
 	if (error) {
@@ -223,6 +279,9 @@ static int tm2_touchkey_probe(struct i2c_client *client,
 		return error;
 	}
 
+	if (touchkey->variant->fixed_regulator)
+		tm2_touchkey_led_brightness_set(&touchkey->led_dev, LED_ON);
+
 	return 0;
 }
 
@@ -262,7 +321,16 @@ static const struct i2c_device_id tm2_touchkey_id_table[] = {
 MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table);
 
 static const struct of_device_id tm2_touchkey_of_match[] = {
-	{ .compatible = "cypress,tm2-touchkey", },
+	{
+		.compatible = "cypress,tm2-touchkey",
+		.data = &tm2_touchkey_variant,
+	}, {
+		.compatible = "cypress,midas-touchkey",
+		.data = &midas_touchkey_variant,
+	}, {
+		.compatible = "cypress,aries-touchkey",
+		.data = &aries_touchkey_variant,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match);
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 279fb02a0f14..e15ed1bb8558 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -117,6 +117,16 @@ config INPUT_E3X0_BUTTON
 	  To compile this driver as a module, choose M here: the
 	  module will be called e3x0_button.
 
+config INPUT_MSM_VIBRATOR
+	tristate "Qualcomm MSM vibrator driver"
+	select INPUT_FF_MEMLESS
+	help
+	  Support for the vibrator that is found on various Qualcomm MSM
+	  SOCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called msm_vibrator.
+
 config INPUT_PCSPKR
 	tristate "PC Speaker support"
 	depends on PCSPKR_PLATFORM
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 1b44202ad8f7..b936c5b1d4ac 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_INPUT_MAX8925_ONKEY)	+= max8925_onkey.o
 obj-$(CONFIG_INPUT_MAX8997_HAPTIC)	+= max8997_haptic.o
 obj-$(CONFIG_INPUT_MC13783_PWRBUTTON)	+= mc13783-pwrbutton.o
 obj-$(CONFIG_INPUT_MMA8450)		+= mma8450.o
+obj-$(CONFIG_INPUT_MSM_VIBRATOR)	+= msm-vibrator.o
 obj-$(CONFIG_INPUT_PALMAS_PWRBUTTON)	+= palmas-pwrbutton.o
 obj-$(CONFIG_INPUT_PCAP)		+= pcap_keys.o
 obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c
index 3d51175c4d72..74cf3b612f05 100644
--- a/drivers/input/misc/ims-pcu.c
+++ b/drivers/input/misc/ims-pcu.c
@@ -39,8 +39,6 @@ struct ims_pcu_gamepad {
 
 struct ims_pcu_backlight {
 	struct led_classdev cdev;
-	struct work_struct work;
-	enum led_brightness desired_brightness;
 	char name[32];
 };
 
@@ -949,14 +947,14 @@ out:
 
 #define IMS_PCU_MAX_BRIGHTNESS		31998
 
-static void ims_pcu_backlight_work(struct work_struct *work)
+static int ims_pcu_backlight_set_brightness(struct led_classdev *cdev,
+					    enum led_brightness value)
 {
 	struct ims_pcu_backlight *backlight =
-			container_of(work, struct ims_pcu_backlight, work);
+			container_of(cdev, struct ims_pcu_backlight, cdev);
 	struct ims_pcu *pcu =
 			container_of(backlight, struct ims_pcu, backlight);
-	int desired_brightness = backlight->desired_brightness;
-	__le16 br_val = cpu_to_le16(desired_brightness);
+	__le16 br_val = cpu_to_le16(value);
 	int error;
 
 	mutex_lock(&pcu->cmd_mutex);
@@ -966,19 +964,11 @@ static void ims_pcu_backlight_work(struct work_struct *work)
 	if (error && error != -ENODEV)
 		dev_warn(pcu->dev,
 			 "Failed to set desired brightness %u, error: %d\n",
-			 desired_brightness, error);
+			 value, error);
 
 	mutex_unlock(&pcu->cmd_mutex);
-}
 
-static void ims_pcu_backlight_set_brightness(struct led_classdev *cdev,
-					     enum led_brightness value)
-{
-	struct ims_pcu_backlight *backlight =
-			container_of(cdev, struct ims_pcu_backlight, cdev);
-
-	backlight->desired_brightness = value;
-	schedule_work(&backlight->work);
+	return error;
 }
 
 static enum led_brightness
@@ -1015,14 +1005,14 @@ static int ims_pcu_setup_backlight(struct ims_pcu *pcu)
 	struct ims_pcu_backlight *backlight = &pcu->backlight;
 	int error;
 
-	INIT_WORK(&backlight->work, ims_pcu_backlight_work);
 	snprintf(backlight->name, sizeof(backlight->name),
 		 "pcu%d::kbd_backlight", pcu->device_no);
 
 	b