Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull more powerpc bits from Ben Herrenschmidt:
 "Here are a few more powerpc bits for this merge window.  The bulk is
  made of two pull requests from Scott and Anatolij that I had missed
  previously (they arrived while I was away).  Since both their branches
  are in -next independently, and the content has been around for a
  little while, they can still go in.

  The rest is mostly bug and regression fixes, a small series of
  cleanups to our pseries cpuidle code (including moving it to the right
  place), and one new cpuidle bakend for the powernv platform.  I also
  wired up the new sched_attr syscalls"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (37 commits)
  powerpc: Wire up sched_setattr and sched_getattr syscalls
  powerpc/hugetlb: Replace __get_cpu_var with get_cpu_var
  powerpc: Make sure "cache" directory is removed when offlining cpu
  powerpc/mm: Fix mmap errno when MAP_FIXED is set and mapping exceeds the allowed address space
  powerpc/powernv/cpuidle: Back-end cpuidle driver for powernv platform.
  powerpc/pseries/cpuidle: smt-snooze-delay cleanup.
  powerpc/pseries/cpuidle: Remove MAX_IDLE_STATE macro.
  powerpc/pseries/cpuidle: Make cpuidle-pseries backend driver a non-module.
  powerpc/pseries/cpuidle: Use cpuidle_register() for initialisation.
  powerpc/pseries/cpuidle: Move processor_idle.c to drivers/cpuidle.
  powerpc: Fix 32-bit frames for signals delivered when transactional
  powerpc/iommu: Fix initialisation of DART iommu table
  powerpc/numa: Fix decimal permissions
  powerpc/mm: Fix compile error of pgtable-ppc64.h
  powerpc: Fix hw breakpoints on !HAVE_HW_BREAKPOINT configurations
  clk: corenet: Adds the clock binding
  powerpc/booke64: Guard e6500 tlb handler with CONFIG_PPC_FSL_BOOK3E
  powerpc/512x: dts: add MPC5125 clock specs
  powerpc/512x: clk: support MPC5121/5123/5125 SoC variants
  powerpc/512x: clk: enforce even SDHC divider values
  ...

46 files changed, 2234 insertions, 1196 deletions

diff --git a/Documentation/devicetree/bindings/clock/corenet-clock.txt b/Documentation/devicetree/bindings/clock/corenet-clock.txt
new file mode 100644
index 000000000000..24711af48e30
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/corenet-clock.txt
@@ -0,0 +1,134 @@
+* Clock Block on Freescale CoreNet Platforms
+
+Freescale CoreNet chips take primary clocking input from the external
+SYSCLK signal. The SYSCLK input (frequency) is multiplied using
+multiple phase locked loops (PLL) to create a variety of frequencies
+which can then be passed to a variety of internal logic, including
+cores and peripheral IP blocks.
+Please refer to the Reference Manual for details.
+
+1. Clock Block Binding
+
+Required properties:
+- compatible: Should contain a specific clock block compatible string
+	and a single chassis clock compatible string.
+	Clock block strings include, but not limited to, one of the:
+	* "fsl,p2041-clockgen"
+	* "fsl,p3041-clockgen"
+	* "fsl,p4080-clockgen"
+	* "fsl,p5020-clockgen"
+	* "fsl,p5040-clockgen"
+	* "fsl,t4240-clockgen"
+	* "fsl,b4420-clockgen"
+	* "fsl,b4860-clockgen"
+	Chassis clock strings include:
+	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
+	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
+- reg: Describes the address of the device's resources within the
+	address space defined by its parent bus, and resource zero
+	represents the clock register set
+- clock-frequency: Input system clock frequency
+
+Recommended properties:
+- ranges: Allows valid translation between child's address space and
+	parent's. Must be present if the device has sub-nodes.
+- #address-cells: Specifies the number of cells used to represent
+	physical base addresses.  Must be present if the device has
+	sub-nodes and set to 1 if present
+- #size-cells: Specifies the number of cells used to represent
+	the size of an address. Must be present if the device has
+	sub-nodes and set to 1 if present
+
+2. Clock Provider/Consumer Binding
+
+Most of the bindings are from the common clock binding[1].
+ [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : Should include one of the following:
+	* "fsl,qoriq-core-pll-1.0" for core PLL clocks (v1.0)
+	* "fsl,qoriq-core-pll-2.0" for core PLL clocks (v2.0)
+	* "fsl,qoriq-core-mux-1.0" for core mux clocks (v1.0)
+	* "fsl,qoriq-core-mux-2.0" for core mux clocks (v2.0)
+	* "fsl,qoriq-sysclk-1.0": for input system clock (v1.0).
+		It takes parent's clock-frequency as its clock.
+	* "fsl,qoriq-sysclk-2.0": for input system clock (v2.0).
+		It takes parent's clock-frequency as its clock.
+- #clock-cells: From common clock binding. The number of cells in a
+	clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
+	clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
+	For "fsl,qoriq-core-pll-[1,2].0" clocks, the single
+	clock-specifier cell may take the following values:
+	* 0 - equal to the PLL frequency
+	* 1 - equal to the PLL frequency divided by 2
+	* 2 - equal to the PLL frequency divided by 4
+
+Recommended properties:
+- clocks: Should be the phandle of input parent clock
+- clock-names: From common clock binding, indicates the clock name
+- clock-output-names: From common clock binding, indicates the names of
+	output clocks
+- reg: Should be the offset and length of clock block base address.
+	The length should be 4.
+
+Example for clock block and clock provider:
+/ {
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+		ranges = <0x0 0xe1000 0x1000>;
+		clock-frequency = <133333333>;
+		reg = <0xe1000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysclk: sysclk {
+			#clock-cells = <0>;
+			compatible = "fsl,qoriq-sysclk-1.0";
+			clock-output-names = "sysclk";
+		}
+
+		pll0: pll0@800 {
+			#clock-cells = <1>;
+			reg = <0x800 0x4>;
+			compatible = "fsl,qoriq-core-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll0", "pll0-div2";
+		};
+
+		pll1: pll1@820 {
+			#clock-cells = <1>;
+			reg = <0x820 0x4>;
+			compatible = "fsl,qoriq-core-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll1", "pll1-div2";
+		};
+
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux0";
+		};
+
+		mux1: mux1@20 {
+			#clock-cells = <0>;
+			reg = <0x20 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux1";
+		};
+	};
+  }
+
+Example for clock consumer:
+
+/ {
+	cpu0: PowerPC,e5500@0 {
+		...
+		clocks = <&mux0>;
+		...
+	};
+  }
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 25493a0b174c..a5e5d2ec380b 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -532,6 +532,7 @@ config PPC_16K_PAGES
 
 config PPC_64K_PAGES
 	bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64
+	depends on !PPC_FSL_BOOK3E
 	select PPC_HAS_HASH_64K if PPC_STD_MMU_64
 
 config PPC_256K_PAGES
@@ -1045,11 +1046,6 @@ config KEYS_COMPAT
 
 source "crypto/Kconfig"
 
-config PPC_CLOCK
-	bool
-	default n
-	select HAVE_CLK
-
 config PPC_LIB_RHEAP
 	bool
 
diff --git a/arch/powerpc/boot/dts/ac14xx.dts b/arch/powerpc/boot/dts/ac14xx.dts
index a543c4088cba..a1b883730b31 100644
--- a/arch/powerpc/boot/dts/ac14xx.dts
+++ b/arch/powerpc/boot/dts/ac14xx.dts
@@ -139,7 +139,14 @@
 		};
 	};
 
+	clocks {
+		osc {
+			clock-frequency = <25000000>;
+		};
+	};
+
 	soc@80000000 {
+		bus-frequency = <80000000>;	/* 80 MHz ips bus */
 
 		clock@f00 {
 			compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock";
diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi
index 2d7cb04ac962..2c0e1552d20b 100644
--- a/arch/powerpc/boot/dts/mpc5121.dtsi
+++ b/arch/powerpc/boot/dts/mpc5121.dtsi
@@ -9,6 +9,8 @@
  * option) any later version.
  */
 
+#include <dt-bindings/clock/mpc512x-clock.h>
+
 /dts-v1/;
 
 / {
@@ -49,6 +51,10 @@
 		compatible = "fsl,mpc5121-mbx";
 		reg = <0x20000000 0x4000>;
 		interrupts = <66 0x8>;
+		clocks = <&clks MPC512x_CLK_MBX_BUS>,
+			 <&clks MPC512x_CLK_MBX_3D>,
+			 <&clks MPC512x_CLK_MBX>;
+		clock-names = "mbx-bus", "mbx-3d", "mbx";
 	};
 
 	sram@30000000 {
@@ -62,6 +68,8 @@
 		interrupts = <6 8>;
 		#address-cells = <1>;
 		#size-cells = <1>;
+		clocks = <&clks MPC512x_CLK_NFC>;
+		clock-names = "ipg";
 	};
 
 	localbus@80000020 {
@@ -73,6 +81,17 @@
 		ranges = <0x0 0x0 0xfc000000 0x04000000>;
 	};
 
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <33000000>;
+		};
+	};
+
 	soc@80000000 {
 		compatible = "fsl,mpc5121-immr";
 		#address-cells = <1>;
@@ -117,9 +136,12 @@
 		};
 
 		/* Clock control */
-		clock@f00 {
+		clks: clock@f00 {
 			compatible = "fsl,mpc5121-clock";
 			reg = <0xf00 0x100>;
+			#clock-cells = <1>;
+			clocks = <&osc>;
+			clock-names = "osc";
 		};
 
 		/* Power Management Controller */
@@ -139,12 +161,24 @@
 			compatible = "fsl,mpc5121-mscan";
 			reg = <0x1300 0x80>;
 			interrupts = <12 0x8>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN0_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
 		};
 
 		can@1380 {
 			compatible = "fsl,mpc5121-mscan";
 			reg = <0x1380 0x80>;
 			interrupts = <13 0x8>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN1_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
 		};
 
 		sdhc@1500 {
@@ -153,6 +187,9 @@
 			interrupts = <8 0x8>;
 			dmas = <&dma0 30>;
 			dma-names = "rx-tx";
+			clocks = <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SDHC>;
+			clock-names = "ipg", "per";
 		};
 
 		i2c@1700 {
@@ -161,6 +198,8 @@
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
 			reg = <0x1700 0x20>;
 			interrupts = <9 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
 		};
 
 		i2c@1720 {
@@ -169,6 +208,8 @@
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
 			reg = <0x1720 0x20>;
 			interrupts = <10 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
 		};
 
 		i2c@1740 {
@@ -177,6 +218,8 @@
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
 			reg = <0x1740 0x20>;
 			interrupts = <11 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
 		};
 
 		i2ccontrol@1760 {
@@ -188,30 +231,48 @@
 			compatible = "fsl,mpc5121-axe";
 			reg = <0x2000 0x100>;
 			interrupts = <42 0x8>;
+			clocks = <&clks MPC512x_CLK_AXE>;
+			clock-names = "ipg";
 		};
 
 		display@2100 {
 			compatible = "fsl,mpc5121-diu";
 			reg = <0x2100 0x100>;
 			interrupts = <64 0x8>;
+			clocks = <&clks MPC512x_CLK_DIU>;
+			clock-names = "ipg";
 		};
 
 		can@2300 {
 			compatible = "fsl,mpc5121-mscan";
 			reg = <0x2300 0x80>;
 			interrupts = <90 0x8>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN2_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
 		};
 
 		can@2380 {
 			compatible = "fsl,mpc5121-mscan";
 			reg = <0x2380 0x80>;
 			interrupts = <91 0x8>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN3_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
 		};
 
 		viu@2400 {
 			compatible = "fsl,mpc5121-viu";
 			reg = <0x2400 0x400>;
 			interrupts = <67 0x8>;
+			clocks = <&clks MPC512x_CLK_VIU>;
+			clock-names = "ipg";
 		};
 
 		mdio@2800 {
@@ -219,6 +280,8 @@
 			reg = <0x2800 0x800>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&clks MPC512x_CLK_FEC>;
+			clock-names = "per";
 		};
 
 		eth0: ethernet@2800 {
@@ -227,6 +290,8 @@
 			reg = <0x2800 0x800>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <4 0x8>;
+			clocks = <&clks MPC512x_CLK_FEC>;
+			clock-names = "per";
 		};
 
 		/* USB1 using external ULPI PHY */
@@ -238,6 +303,8 @@
 			interrupts = <43 0x8>;
 			dr_mode = "otg";
 			phy_type = "ulpi";
+			clocks = <&clks MPC512x_CLK_USB1>;
+			clock-names = "ipg";
 		};
 
 		/* USB0 using internal UTMI PHY */
@@ -249,6 +316,8 @@
 			interrupts = <44 0x8>;
 			dr_mode = "otg";
 			phy_type = "utmi_wide";
+			clocks = <&clks MPC512x_CLK_USB2>;
+			clock-names = "ipg";
 		};
 
 		/* IO control */
@@ -267,6 +336,8 @@
 			compatible = "fsl,mpc5121-pata";
 			reg = <0x10200 0x100>;
 			interrupts = <5 0x8>;
+			clocks = <&clks MPC512x_CLK_PATA>;
+			clock-names = "ipg";
 		};
 
 		/* 512x PSCs are not 52xx PSC compatible */
@@ -278,6 +349,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC0>,
+				 <&clks MPC512x_CLK_PSC0_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC1 */
@@ -287,6 +361,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC1>,
+				 <&clks MPC512x_CLK_PSC1_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC2 */
@@ -296,6 +373,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC2>,
+				 <&clks MPC512x_CLK_PSC2_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC3 */
@@ -305,6 +385,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC3>,
+				 <&clks MPC512x_CLK_PSC3_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC4 */
@@ -314,6 +397,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC4>,
+				 <&clks MPC512x_CLK_PSC4_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC5 */
@@ -323,6 +409,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC5>,
+				 <&clks MPC512x_CLK_PSC5_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC6 */
@@ -332,6 +421,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC6>,
+				 <&clks MPC512x_CLK_PSC6_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC7 */
@@ -341,6 +433,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC7>,
+				 <&clks MPC512x_CLK_PSC7_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC8 */
@@ -350,6 +445,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC8>,
+				 <&clks MPC512x_CLK_PSC8_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC9 */
@@ -359,6 +457,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC9>,
+				 <&clks MPC512x_CLK_PSC9_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC10 */
@@ -368,6 +469,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC10>,
+				 <&clks MPC512x_CLK_PSC10_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC11 */
@@ -377,12 +481,17 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC11>,
+				 <&clks MPC512x_CLK_PSC11_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		pscfifo@11f00 {
 			compatible = "fsl,mpc5121-psc-fifo";
 			reg = <0x11f00 0x100>;
 			interrupts = <40 0x8>;
+			clocks = <&clks MPC512x_CLK_PSC_FIFO>;
+			clock-names = "ipg";
 		};
 
 		dma0: dma@14000 {
@@ -400,6 +509,8 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
+		clocks = <&clks MPC512x_CLK_PCI>;
+		clock-names = "ipg";
 
 		reg = <0x80008500 0x100	/* internal registers */
 		       0x80008300 0x8>;	/* config space access registers */
diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts
index a618dfc13e4c..e4f297471748 100644
--- a/arch/powerpc/boot/dts/mpc5125twr.dts
+++ b/arch/powerpc/boot/dts/mpc5125twr.dts
@@ -12,6 +12,8 @@
  * option) any later version.
  */
 
+#include <dt-bindings/clock/mpc512x-clock.h>
+
 /dts-v1/;
 
 / {
@@ -54,6 +56,17 @@
 		reg = <0x30000000 0x08000>;		// 32K at 0x30000000
 	};
 
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <33000000>;
+		};
+	};
+
 	soc@80000000 {
 		compatible = "fsl,mpc5121-immr";
 		#address-cells = <1>;
@@ -87,9 +100,12 @@
 			reg = <0xe00 0x100>;
 		};
 
-		clock@f00 {	// Clock control
+		clks: clock@f00 {	// Clock control
 			compatible = "fsl,mpc5121-clock";
 			reg = <0xf00 0x100>;
+			#clock-cells = <1>;
+			clocks = <&osc>;
+			clock-names = "osc";
 		};
 
 		pmc@1000{  // Power Management Controller
@@ -114,18 +130,33 @@
 			compatible = "fsl,mpc5121-mscan";
 			interrupts = <12 0x8>;
 			reg = <0x1300 0x80>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN0_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
 		};
 
 		can@1380 {
 			compatible = "fsl,mpc5121-mscan";
 			interrupts = <13 0x8>;
 			reg = <0x1380 0x80>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN1_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
 		};
 
 		sdhc@1500 {
 			compatible = "fsl,mpc5121-sdhc";
 			interrupts = <8 0x8>;
 			reg = <0x1500 0x100>;
+			clocks = <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SDHC>;
+			clock-names = "ipg", "per";
 		};
 
 		i2c@1700 {
@@ -134,6 +165,8 @@
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
 			reg = <0x1700 0x20>;
 			interrupts = <0x9 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
 		};
 
 		i2c@1720 {
@@ -142,6 +175,8 @@
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
 			reg = <0x1720 0x20>;
 			interrupts = <0xa 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
 		};
 
 		i2c@1740 {
@@ -150,6 +185,8 @@
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
 			reg = <0x1740 0x20>;
 			interrupts = <0xb 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
 		};
 
 		i2ccontrol@1760 {
@@ -161,6 +198,8 @@
 			compatible = "fsl,mpc5121-diu";
 			reg = <0x2100 0x100>;
 			interrupts = <64 0x8>;
+			clocks = <&clks MPC512x_CLK_DIU>;
+			clock-names = "ipg";
 		};
 
 		mdio@2800 {
@@ -180,6 +219,8 @@
 			interrupts = <4 0x8>;
 			phy-handle = < &phy0 >;
 			phy-connection-type = "rmii";
+			clocks = <&clks MPC512x_CLK_FEC>;
+			clock-names = "per";
 		};
 
 		// IO control
@@ -200,6 +241,8 @@
 			interrupts = <43 0x8>;
 			dr_mode = "host";
 			phy_type = "ulpi";
+			clocks = <&clks MPC512x_CLK_USB1>;
+			clock-names = "ipg";
 			status = "disabled";
 		};
 
@@ -211,6 +254,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC1>,
+				 <&clks MPC512x_CLK_PSC1_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		// PSC9 uart1 aka ttyPSC1
@@ -220,12 +266,17 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC9>,
+				 <&clks MPC512x_CLK_PSC9_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		pscfifo@11f00 {
 			compatible = "fsl,mpc5121-psc-fifo";
 			reg = <0x11f00 0x100>;
 			interrupts = <40 0x8>;
+			clocks = <&clks MPC512x_CLK_PSC_FIFO>;
+			clock-names = "ipg";
 		};
 
 		dma@14000 {
diff --git a/arch/powerpc/include/asm/clk_interface.h b/arch/powerpc/include/asm/clk_interface.h
deleted file mode 100644
index ab1882c1e176..000000000000
--- a/arch/powerpc/include/asm/clk_interface.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_POWERPC_CLK_INTERFACE_H
-#define __ASM_POWERPC_CLK_INTERFACE_H
-
-#include <linux/clk.h>
-
-struct clk_interface {
-	struct clk*	(*clk_get)	(struct device *dev, const char *id);
-	int		(*clk_enable)	(struct clk *clk);
-	void		(*clk_disable)	(struct clk *clk);
-	unsigned long	(*clk_get_rate)	(struct clk *clk);
-	void		(*clk_put)	(struct clk *clk);
-	long		(*clk_round_rate) (struct clk *clk, unsigned long rate);
-	int 		(*clk_set_rate)	(struct clk *clk, unsigned long rate);
-	int		(*clk_set_parent) (struct clk *clk, struct clk *parent);
-	struct clk*	(*clk_get_parent) (struct clk *clk);
-};
-
-extern struct clk_interface clk_functions;
-
-#endif /* __ASM_POWERPC_CLK_INTERFACE_H */
diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h
index 887d3d6133e3..4a69cd1d5041 100644
--- a/arch/powerpc/include/asm/mpc5121.h
+++ b/arch/powerpc/include/asm/mpc5121.h
@@ -37,7 +37,12 @@ struct mpc512x_ccm {
 	u32	cccr;	/* CFM Clock Control Register */
 	u32	dccr;	/* DIU Clock Control Register */
 	u32	m