Merge tag 'hwmon-for-linus-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - New driver for W83773G

 - Fan control support for PMBus drivers

 - Improvements and minor fixes in several drivers

* tag 'hwmon-for-linus-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (32 commits)
  hwmon: (dell-smm) Disable fan support for Dell Vostro 3360
  hwmon: (dell-smm) Disable fan support for Dell Inspiron 7720
  hwmon: (dell-smm) Enable broken functionality via "force" module param
  hwmon: (k10temp) Add temperature offset for Ryzen 1900X
  hwmon: (lm75) Fix trailing semicolon
  hwmon: (ina2xx) Fix access to uninitialized mutex
  hwmon: (pmbus/ir35221) Remove unnecessary scaling
  hwmon: (sht3x) wait predefined limits loading complete before access
  hwmon: (pmbus/ibm-cffps) Add dependency on LEDS_CLASS
  hwmon: (pmbus/cffps) Add led class device for power supply fault led
  hwmon: (pmbus) cffps: Add PMBUS_SKIP_STATUS_CHECK
  hwmon: (aspeed-pwm-tacho) Deassert reset in probe
  dt-bindings: hwmon: aspeed-pwm-tacho: Add reset node
  hwmon: (pmbus) cffps: Add debugfs entries
  hwmon: (pmbus) Export pmbus device debugfs directory entry
  hwmon: (w83773g) Fix fault detection and reporting
  hwmon: (hih6130) Fix documentation of struct hih6130
  hwmon: (iio_hwmon) Fix documentation of struct iio_hwmon_state
  hwmon: (sht15) Fix parameter documentation of sht15_crc8()
  hwmon: (sht21) Fix documentation of struct sht21
  ...

26 files changed, 1408 insertions, 382 deletions

diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
index 367c8203213b..3ac02988a1a5 100644
--- a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
+++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
@@ -22,8 +22,9 @@ Required properties for pwm-tacho node:
 - compatible : should be "aspeed,ast2400-pwm-tacho" for AST2400 and
 	       "aspeed,ast2500-pwm-tacho" for AST2500.
 
-- clocks : a fixed clock providing input clock frequency(PWM
-	   and Fan Tach clock)
+- clocks : phandle to clock provider with the clock number in the second cell
+
+- resets : phandle to reset controller with the reset number in the second cell
 
 fan subnode format:
 ===================
@@ -48,19 +49,14 @@ Required properties for each child node:
 
 Examples:
 
-pwm_tacho_fixed_clk: fixedclk {
-	compatible = "fixed-clock";
-	#clock-cells = <0>;
-	clock-frequency = <24000000>;
-};
-
 pwm_tacho: pwmtachocontroller@1e786000 {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	#cooling-cells = <2>;
 	reg = <0x1E786000 0x1000>;
 	compatible = "aspeed,ast2500-pwm-tacho";
-	clocks = <&pwm_tacho_fixed_clk>;
+	clocks = <&syscon ASPEED_CLK_APB>;
+	resets = <&syscon ASPEED_RESET_PWM>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
 
diff --git a/Documentation/hwmon/lm25066 b/Documentation/hwmon/lm25066
index 3fa6bf820c88..51b32aa203a8 100644
--- a/Documentation/hwmon/lm25066
+++ b/Documentation/hwmon/lm25066
@@ -8,11 +8,6 @@ Supported chips:
     Datasheets:
 	http://www.ti.com/lit/gpn/lm25056
 	http://www.ti.com/lit/gpn/lm25056a
-  * TI LM25063
-    Prefix: 'lm25063'
-    Addresses scanned: -
-    Datasheet:
-	To be announced
   * National Semiconductor LM25066
     Prefix: 'lm25066'
     Addresses scanned: -
@@ -42,7 +37,7 @@ Description
 -----------
 
 This driver supports hardware monitoring for National Semiconductor / TI LM25056,
-LM25063, LM25066, LM5064, and LM5066/LM5066I Power Management, Monitoring,
+LM25066, LM5064, and LM5066/LM5066I Power Management, Monitoring,
 Control, and Protection ICs.
 
 The driver is a client driver to the core PMBus driver. Please see
@@ -74,12 +69,8 @@ in1_input		Measured input voltage.
 in1_average		Average measured input voltage.
 in1_min			Minimum input voltage.
 in1_max			Maximum input voltage.
-in1_crit		Critical high input voltage (LM25063 only).
-in1_lcrit		Critical low input voltage (LM25063 only).
 in1_min_alarm		Input voltage low alarm.
 in1_max_alarm		Input voltage high alarm.
-in1_lcrit_alarm		Input voltage critical low alarm (LM25063 only).
-in1_crit_alarm		Input voltage critical high alarm. (LM25063 only).
 
 in2_label		"vmon"
 in2_input		Measured voltage on VAUX pin
@@ -94,16 +85,12 @@ in3_input		Measured output voltage.
 in3_average		Average measured output voltage.
 in3_min			Minimum output voltage.
 in3_min_alarm		Output voltage low alarm.
-in3_highest		Historical minimum output voltage (LM25063 only).
-in3_lowest		Historical maximum output voltage (LM25063 only).
 
 curr1_label		"iin"
 curr1_input		Measured input current.
 curr1_average		Average measured input current.
 curr1_max		Maximum input current.
-curr1_crit		Critical input current (LM25063 only).
 curr1_max_alarm		Input current high alarm.
-curr1_crit_alarm	Input current critical high alarm (LM25063 only).
 
 power1_label		"pin"
 power1_input		Measured input power.
@@ -113,11 +100,6 @@ power1_alarm		Input power alarm
 power1_input_highest	Historical maximum power.
 power1_reset_history	Write any value to reset maximum power history.
 
-power2_label		"pout". LM25063 only.
-power2_input		Measured output power.
-power2_max		Maximum output power limit.
-power2_crit		Critical output power limit.
-
 temp1_input		Measured temperature.
 temp1_max		Maximum temperature.
 temp1_crit		Critical high temperature.
diff --git a/Documentation/hwmon/max31785 b/Documentation/hwmon/max31785
index 45fb6093dec2..270c5f865261 100644
--- a/Documentation/hwmon/max31785
+++ b/Documentation/hwmon/max31785
@@ -17,8 +17,9 @@ management with temperature and remote voltage sensing. Various fan control
 features are provided, including PWM frequency control, temperature hysteresis,
 dual tachometer measurements, and fan health monitoring.
 
-For dual rotor fan configuration, the MAX31785 exposes the slowest rotor of the
-two in the fan[1-4]_input attributes.
+For dual-rotor configurations the MAX31785A exposes the second rotor tachometer
+readings in attributes fan[5-8]_input. By contrast the MAX31785 only exposes
+the slowest rotor measurement, and does so in the fan[1-4]_input attributes.
 
 Usage Notes
 -----------
@@ -31,7 +32,9 @@ Sysfs attributes
 
 fan[1-4]_alarm		Fan alarm.
 fan[1-4]_fault		Fan fault.
-fan[1-4]_input		Fan RPM.
+fan[1-8]_input		Fan RPM. On the MAX31785A, inputs 5-8 correspond to the
+			second rotor of fans 1-4
+fan[1-4]_target		Fan input target
 
 in[1-6]_crit		Critical maximum output voltage
 in[1-6]_crit_alarm	Output voltage critical high alarm
@@ -44,6 +47,12 @@ in[1-6]_max_alarm	Output voltage high alarm
 in[1-6]_min		Minimum output voltage
 in[1-6]_min_alarm	Output voltage low alarm
 
+pwm[1-4]		Fan target duty cycle (0..255)
+pwm[1-4]_enable		0: Full-speed
+			1: Manual PWM control
+			2: Automatic PWM (tach-feedback RPM fan-control)
+			3: Automatic closed-loop (temp-feedback fan-control)
+
 temp[1-11]_crit		Critical high temperature
 temp[1-11]_crit_alarm	Chip temperature critical high alarm
 temp[1-11]_input	Measured temperature
diff --git a/Documentation/hwmon/w83773g b/Documentation/hwmon/w83773g
new file mode 100644
index 000000000000..4cc6c0b8257f
--- /dev/null
+++ b/Documentation/hwmon/w83773g
@@ -0,0 +1,33 @@
+Kernel driver w83773g
+====================
+
+Supported chips:
+  * Nuvoton W83773G
+    Prefix: 'w83773g'
+    Addresses scanned: I2C 0x4c and 0x4d
+    Datasheet: https://www.nuvoton.com/resource-files/W83773G_SG_DatasheetV1_2.pdf
+
+Authors:
+	Lei YU <mine260309@gmail.com>
+
+Description
+-----------
+
+This driver implements support for Nuvoton W83773G temperature sensor
+chip. This chip implements one local and two remote sensors.
+The chip also features offsets for the two remote sensors which get added to
+the input readings. The chip does all the scaling by itself and the driver
+therefore reports true temperatures that don't need any user-space adjustments.
+Temperature is measured in degrees Celsius.
+The chip is wired over I2C/SMBus and specified over a temperature
+range of -40 to +125 degrees Celsius (for local sensor) and -40 to +127
+degrees Celsius (for remote sensors).
+Resolution for both the local and remote channels is 0.125 degree C.
+
+The chip supports only temperature measurement. The driver exports
+the temperature values via the following sysfs files:
+
+temp[1-3]_input
+temp[2-3]_fault
+temp[2-3]_offset
+update_interval
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 7ad017690e3a..ef23553ff5cb 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -26,11 +26,9 @@ if HWMON
 
 config HWMON_VID
 	tristate
-	default n
 
 config HWMON_DEBUG_CHIP
 	bool "Hardware Monitoring Chip debugging messages"
-	default n
 	help
 	  Say Y here if you want the I2C chip drivers to produce a bunch of
 	  debug messages to the system log.  Select this if you are having
@@ -42,7 +40,6 @@ comment "Native drivers"
 config SENSORS_AB8500
 	tristate "AB8500 thermal monitoring"
 	depends on AB8500_GPADC && AB8500_BM
-	default n
 	help
 	  If you say yes here you get support for the thermal sensor part
 	  of the AB8500 chip. The driver includes thermal management for
@@ -302,7 +299,6 @@ config SENSORS_APPLESMC
 	select NEW_LEDS
 	select LEDS_CLASS
 	select INPUT_POLLDEV
-	default n
 	help
 	  This driver provides support for the Apple System Management
 	  Controller, which provides an accelerometer (Apple Sudden Motion
@@ -678,7 +674,6 @@ config SENSORS_JC42
 config SENSORS_POWR1220
 	tristate "Lattice POWR1220 Power Monitoring"
 	depends on I2C
-	default n
 	help
 	  If you say yes here you get access to the hardware monitoring
 	  functions of the Lattice POWR1220 isp Power Supply Monitoring,
@@ -702,7 +697,6 @@ config SENSORS_LTC2945
 	tristate "Linear Technology LTC2945"
 	depends on I2C
 	select REGMAP_I2C
-	default n
 	help
 	  If you say yes here you get support for Linear Technology LTC2945
 	  I2C System Monitor.
@@ -727,7 +721,6 @@ config SENSORS_LTC2990
 config SENSORS_LTC4151
 	tristate "Linear Technology LTC4151"
 	depends on I2C
-	default n
 	help
 	  If you say yes here you get support for Linear Technology LTC4151
 	  High Voltage I2C Current and Voltage Monitor interface.
@@ -738,7 +731,6 @@ config SENSORS_LTC4151
 config SENSORS_LTC4215
 	tristate "Linear Technology LTC4215"
 	depends on I2C
-	default n
 	help
 	  If you say yes here you get support for Linear Technology LTC4215
 	  Hot Swap Controller I2C interface.
@@ -750,7 +742,6 @@ config SENSORS_LTC4222
 	tristate "Linear Technology LTC4222"
 	depends on I2C
 	select REGMAP_I2C
-	default n
 	help
 	  If you say yes here you get support for Linear Technology LTC4222
 	  Dual Hot Swap Controller I2C interface.
@@ -761,7 +752,6 @@ config SENSORS_LTC4222
 config SENSORS_LTC4245
 	tristate "Linear Technology LTC4245"
 	depends on I2C
-	default n
 	help
 	  If you say yes here you get support for Linear Technology LTC4245
 	  Multiple Supply Hot Swap Controller I2C interface.
@@ -773,7 +763,6 @@ config SENSORS_LTC4260
 	tristate "Linear Technology LTC4260"
 	depends on I2C
 	select REGMAP_I2C
-	default n
 	help
 	  If you say yes here you get support for Linear Technology LTC4260
 	  Positive Voltage Hot Swap Controller I2C interface.
@@ -784,7 +773,6 @@ config SENSORS_LTC4260
 config SENSORS_LTC4261
 	tristate "Linear Technology LTC4261"
 	depends on I2C
-	default n
 	help
 	  If you say yes here you get support for Linear Technology LTC4261
 	  Negative Voltage Hot Swap Controller I2C interface.
@@ -1276,7 +1264,6 @@ config SENSORS_NSA320
 config SENSORS_PCF8591
 	tristate "Philips PCF8591 ADC/DAC"
 	depends on I2C
-	default n
 	help
 	  If you say yes here you get support for Philips PCF8591 4-channel
 	  ADC, 1-channel DAC chips.
@@ -1459,7 +1446,6 @@ config SENSORS_SMSC47B397
 
 config SENSORS_SCH56XX_COMMON
 	tristate
-	default n
 
 config SENSORS_SCH5627
 	tristate "SMSC SCH5627"
@@ -1505,7 +1491,6 @@ config SENSORS_STTS751
 config SENSORS_SMM665
 	tristate "Summit Microelectronics SMM665"
 	depends on I2C
-	default n
 	help
 	  If you say yes here you get support for the hardware monitoring
 	  features of the Summit Microelectronics SMM665/SMM665B Six-Channel
@@ -1725,6 +1710,16 @@ config SENSORS_VT8231
 	  This driver can also be built as a module.  If so, the module
 	  will be called vt8231.
 
+config SENSORS_W83773G
+	tristate "Nuvoton W83773G"
+	depends on I2C
+	help
+	  If you say yes here you get support for the Nuvoton W83773G hardware
+	  monitoring chip.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called w83773g.
+
 config SENSORS_W83781D
 	tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
 	depends on I2C
@@ -1782,7 +1777,6 @@ config SENSORS_W83795
 config SENSORS_W83795_FANCTRL
 	bool "Include automatic fan control support (DANGEROUS)"
 	depends on SENSORS_W83795
-	default n
 	help
 	  If you say yes here, support for automatic fan speed control
 	  will be included in the driver.
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 0fe489fab663..f814b4ace138 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_SENSORS_ATK0110)	+= asus_atk0110.o
 # asb100, then w83781d go first, as they can override other drivers' addresses.
 obj-$(CONFIG_SENSORS_ASB100)	+= asb100.o
 obj-$(CONFIG_SENSORS_W83627HF)	+= w83627hf.o
+obj-$(CONFIG_SENSORS_W83773G)	+= w83773g.o
 obj-$(CONFIG_SENSORS_W83792D)	+= w83792d.o
 obj-$(CONFIG_SENSORS_W83793)	+= w83793.o
 obj-$(CONFIG_SENSORS_W83795)	+= w83795.o
diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c
index 63a95e23ca81..693a3d53cab5 100644
--- a/drivers/hwmon/aspeed-pwm-tacho.c
+++ b/drivers/hwmon/aspeed-pwm-tacho.c
@@ -19,6 +19,7 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/reset.h>
 #include <linux/sysfs.h>
 #include <linux/thermal.h>
 
@@ -181,6 +182,7 @@ struct aspeed_cooling_device {
 
 struct aspeed_pwm_tacho_data {
 	struct regmap *regmap;
+	struct reset_control *rst;
 	unsigned long clk_freq;
 	bool pwm_present[8];
 	bool fan_tach_present[16];
@@ -905,6 +907,13 @@ static int aspeed_create_fan(struct device *dev,
 	return 0;
 }
 
+static void aspeed_pwm_tacho_remove(void *data)
+{
+	struct aspeed_pwm_tacho_data *priv = data;
+
+	reset_control_assert(priv->rst);
+}
+
 static int aspeed_pwm_tacho_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -931,6 +940,19 @@ static int aspeed_pwm_tacho_probe(struct platform_device *pdev)
 			&aspeed_pwm_tacho_regmap_config);
 	if (IS_ERR(priv->regmap))
 		return PTR_ERR(priv->regmap);
+
+	priv->rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(priv->rst)) {
+		dev_err(dev,
+			"missing or invalid reset controller device tree entry");
+		return PTR_ERR(priv->rst);
+	}
+	reset_control_deassert(priv->rst);
+
+	ret = devm_add_action_or_reset(dev, aspeed_pwm_tacho_remove, priv);
+	if (ret)
+		return ret;
+
 	regmap_write(priv->regmap, ASPEED_PTCR_TACH_SOURCE, 0);
 	regmap_write(priv->regmap, ASPEED_PTCR_TACH_SOURCE_EXT, 0);
 
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index c13a4fd86b3c..4bdbf77f7197 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -246,7 +246,8 @@ static int adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
 	int err;
 	u32 eax, edx;
 	int i;
-	struct pci_dev *host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
+	u16 devfn = PCI_DEVFN(0, 0);
+	struct pci_dev *host_bridge = pci_get_domain_bus_and_slot(0, 0, devfn);
 
 	/*
 	 * Explicit tjmax table entries override heuristics.
diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
index c7c9e95e58a8..bf3bb7e1adab 100644
--- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -76,6 +76,7 @@ static uint i8k_fan_mult = I8K_FAN_MULT;
 static uint i8k_pwm_mult;
 static uint i8k_fan_max = I8K_FAN_HIGH;
 static bool disallow_fan_type_call;
+static bool disallow_fan_support;
 
 #define I8K_HWMON_HAVE_TEMP1	(1 << 0)
 #define I8K_HWMON_HAVE_TEMP2	(1 << 1)
@@ -242,6 +243,9 @@ static int i8k_get_fan_status(int fan)
 {
 	struct smm_regs regs = { .eax = I8K_SMM_GET_FAN, };
 
+	if (disallow_fan_support)
+		return -EINVAL;
+
 	regs.ebx = fan & 0xff;
 	return i8k_smm(&regs) ? : regs.eax & 0xff;
 }
@@ -253,6 +257,9 @@ static int i8k_get_fan_speed(int fan)
 {
 	struct smm_regs regs = { .eax = I8K_SMM_GET_SPEED, };
 
+	if (disallow_fan_support)
+		return -EINVAL;
+
 	regs.ebx = fan & 0xff;
 	return i8k_smm(&regs) ? : (regs.eax & 0xffff) * i8k_fan_mult;
 }
@@ -264,7 +271,7 @@ static int _i8k_get_fan_type(int fan)
 {
 	struct smm_regs regs = { .eax = I8K_SMM_GET_FAN_TYPE, };
 
-	if (disallow_fan_type_call)
+	if (disallow_fan_support || disallow_fan_type_call)
 		return -EINVAL;
 
 	regs.ebx = fan & 0xff;
@@ -289,6 +296,9 @@ static int i8k_get_fan_nominal_speed(int fan, int speed)
 {
 	struct smm_regs regs = { .eax = I8K_SMM_GET_NOM_SPEED, };
 
+	if (disallow_fan_support)
+		return -EINVAL;
+
 	regs.ebx = (fan & 0xff) | (speed << 8);
 	return i8k_smm(&regs) ? : (regs.eax & 0xffff) * i8k_fan_mult;
 }
@@ -300,6 +310,9 @@ static int i8k_set_fan(int fan, int speed)
 {
 	struct smm_regs regs = { .eax = I8K_SMM_SET_FAN, };
 
+	if (disallow_fan_support)
+		return -EINVAL;
+
 	speed = (speed < 0) ? 0 : ((speed > i8k_fan_max) ? i8k_fan_max : speed);
 	regs.ebx = (fan & 0xff) | (speed << 8);
 
@@ -772,6 +785,8 @@ static struct attribute *i8k_attrs[] = {
 static umode_t i8k_is_visible(struct kobject *kobj, struct attribute *attr,
 			      int index)
 {
+	if (disallow_fan_support && index >= 8)
+		return 0;
 	if (disallow_fan_type_call &&
 	    (index == 9 || index == 12 || index == 15))
 		return 0;
@@ -1039,6 +1054,30 @@ static const struct dmi_system_id i8k_blacklist_fan_type_dmi_table[] __initconst
 };
 
 /*
+ * On some machines all fan related SMM functions implemented by Dell BIOS
+ * firmware freeze kernel for about 500ms. Until Dell fixes these problems fan
+ * support for affected blacklisted Dell machines stay disabled.
+ * See bug: https://bugzilla.kernel.org/show_bug.cgi?id=195751
+ */
+static struct dmi_system_id i8k_blacklist_fan_support_dmi_table[] __initdata = {
+	{
+		.ident = "Dell Inspiron 7720",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Inspiron 7720"),
+		},
+	},
+	{
+		.ident = "Dell Vostro 3360",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Vostro 3360"),
+		},
+	},
+	{ }
+};
+
+/*
  * Probe for the presence of a supported laptop.
  */
 static int __init i8k_probe(void)
@@ -1060,8 +1099,17 @@ static int __init i8k_probe(void)
 			i8k_get_dmi_data(DMI_BIOS_VERSION));
 	}
 
-	if (dmi_check_system(i8k_blacklist_fan_type_dmi_table))
-		disallow_fan_type_call = true;
+	if (dmi_check_system(i8k_blacklist_fan_support_dmi_table)) {
+		pr_warn("broken Dell BIOS detected, disallow fan support\n");
+		if (!force)
+			disallow_fan_support = true;
+	}
+
+	if (dmi_check_system(i8k_blacklist_fan_type_dmi_table)) {
+		pr_warn("broken Dell BIOS detected, disallow fan type call\n");
+		if (!force)
+			disallow_fan_type_call = true;
+	}
 
 	strlcpy(bios_version, i8k_get_dmi_data(DMI_BIOS_VERSION),
 		sizeof(bios_version));
diff --git a/drivers/hwmon/hih6130.c b/drivers/hwmon/hih6130.c
index 7b73d2002d3e..0ae1ee1dbf76 100644
--- a/drivers/hwmon/hih6130.c
+++ b/drivers/hwmon/hih6130.c
@@ -37,7 +37,7 @@
 
 /**
  * struct hih6130 - HIH-6130 device specific data
- * @hwmon_dev: device registered with hwmon
+ * @client: pointer to I2C client device
  * @lock: mutex to protect measurement values
  * @valid: only false before first measurement is taken
  * @last_update: time of last update (jiffies)
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index af5123042990..32083e452cde 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -678,7 +678,7 @@ EXPORT_SYMBOL_GPL(hwmon_device_register_with_groups);
  * @dev: the parent device
  * @name: hwmon name attribute
  * @drvdata: driver data to attach to created device
- * @info: pointer to hwmon chip information
+ * @chip: pointer to hwmon chip information
  * @extra_groups: pointer to list of additional non-standard attribute groups
  *
  * hwmon_device_unregister() must be called when the device is no
@@ -785,11 +785,11 @@ EXPORT_SYMBOL_GPL(devm_hwmon_device_register_with_groups);
 
 /**
  * devm_hwmon_device_register_with_info - register w/ hwmon
- * @dev: the parent device
- * @name: hwmon name attribute
- * @drvdata: driver data to attach to created device
- * @info: Pointer to hwmon chip information
- * @groups - pointer to list of driver specific attribute groups
+ * @dev:	the parent device
+ * @name:	hwmon name attribute
+ * @drvdata:	driver data to attach to created device
+ * @chip:	pointer to hwmon chip information
+ * @groups:	pointer to list of driver specific attribute groups
  *
  * Returns the pointer to the new device. The new device is automatically
  * unregistered with the parent device.
diff --git a/drivers/hwmon/iio_hwmon.c b/drivers/hwmon/iio_hwmon.c
index f6a76679c650..5e5b32a1ec4b 100644
--- a/drivers/hwmon/iio_hwmon.c
+++ b/drivers/hwmon/iio_hwmon.c
@@ -23,7 +23,8 @@
  * @channels:		filled with array of channels from iio
  * @num_channels:	number of channels in channels (saves counting twice)
  * @hwmon_dev:		associated hwmon device
- * @attr_group:	the group of attributes
+ * @attr_group:		the group of attributes
+ * @groups:		null terminated array of attribute groups
  * @attrs:		null terminated array of attribute pointers.
  */
 struct iio_hwmon_state {
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index 62e38fa8cda2..e9e6aeabbf84 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -95,18 +95,20 @@ enum ina2xx_ids { ina219, ina226 };
 
 struct ina2xx_config {
 	u16 config_default;
-	int calibration_factor;
+	int calibration_value;
 	int registers;
 	int shunt_div;
 	int bus_voltage_shift;
 	int bus_voltage_lsb;	/* uV */
-	int power_lsb;		/* uW */
+	int power_lsb_factor;
 };
 
 struct ina2xx_data {
 	const struct ina2xx_config *config;
 
 	long rshunt;
+	long current_lsb_uA;
+	long power_lsb_uW;
 	struct mutex config_lock;
 	struct regmap *regmap;
 
@@ -116,21 +118,21 @@ struct ina2xx_data {
 static const struct ina2xx_config ina2xx_config[] = {
 	[ina219] = {
 		.config_default = INA219_CONFIG_DEFAULT,
-		.calibration_factor = 40960000,
+		.calibration_value = 4096,
 		.registers = INA219_REGISTERS,
 		.shunt_div = 100,
 		.bus_voltage_shift = 3,
 		.bus_voltage_lsb = 4000,
-		.power_lsb = 20000,
+		.power_lsb_factor = 20,
 	},
 	[ina226] = {
 		.config_default = INA226_CONFIG_DEFAULT,
-		.calibration_factor = 5120000,
+		.calibration_value = 2048,
 		.registers = INA226_REGISTERS,
 		.shunt_div = 400,
 		.bus_voltage_shift = 0,
 		.bus_voltage_lsb = 1250,
-		.power_lsb = 25000,
+		.power_lsb_factor = 25,
 	},
 };
 
@@ -169,12 +171,16 @@ static u16 ina226_interval_to_reg(int interval)
 	return INA226_SHIFT_AVG(avg_bits);
 }
 
+/*
+ * Calibration register is set to the best value, which eliminates
+ * truncation errors on calculating current register in hardware.
+ * According to datasheet (eq. 3) the best values are 2048 for
+ * ina226 and 4096 for ina219. They are hardcoded as calibration_value.
+ */
 static int ina2xx_calibrate(struct ina2xx_data *data)
 {
-	u16 val = DIV_ROUND_CLOSEST(data->config->calibration_factor,
-				    data->rshunt);
-
-	return regmap_write(data->regmap, INA2XX_CALIBRATION, val);
+	return regmap_write(data->regmap, INA2XX_CALIBRATION,
+			    data->config->calibration_value);
 }
 
 /*
@@ -187,10 +193,6 @@ static int ina2xx_init(struct ina2xx_data *data)
 	if (ret < 0)
 		return ret;
 
-	/*
-	 * Set current LSB to 1mA, shunt is in uOhms
-	 * (equation 13 in datasheet).
-	 */
 	return ina2xx_calibrate(data);
 }
 
@@ -268,15 +270,15 @@ static int ina2xx_get_value(struct ina2xx_data *data, u8 reg,
 		val = DIV_ROUND_CLOSEST(val, 1000);
 		break;
 	case INA2XX_POWER:
-		val = regval * data->config->power_lsb;
+		val = regval * data->power_lsb_uW;
 		break;
 	case INA2XX_CURRENT:
-		/* signed register, LSB=1mA (selected), in mA */
-		val = (s16)regval;
+		/* signed register, result in mA */
+		val = regval * data->current_lsb_uA;
+		val = DIV_ROUND_CLOSEST(val, 1000);
 		break;
 	case INA2XX_CALIBRATION:
-		val = DIV_ROUND_CLOSEST(data->config->calibration_factor,
-					regval);
+		val = regval;
 		break;
 	default:
 		/* programmer goofed */
@@ -304,9 +306,32 @@ static ssize_t ina2xx_show_value(struct device *dev,
 			ina2xx_get_value(data, attr->index, regval));
 }
 
-static ssize_t ina2xx_set_shunt(struct device *dev,
-				struct device_attribute *da,
-				const char *buf, size_t count)
+/*
+ * In order to keep calibration register value fixed, the product
+ * of current_lsb and shunt_resistor should also be fixed and equal
+ * to shunt_voltage_lsb = 1 / shunt_div multiplied by 10^9 in order
+ * to keep the scale.
+ */
+static int ina2xx_set_shunt(struct ina2xx_data *data, long val)
+{
+	unsigned int dividend = DIV_ROUND_CLOSEST(1000000000,
+						  data->config->shunt_div);
+	if (val <= 0 || val > dividend)
+		return -EINVAL;
+
+	mutex_lock(&data->config_lock);
+	data->rshunt = val;
+	data->current_lsb_uA = DIV_ROUND_CLOSEST(dividend, val);
+	data->power_lsb_uW = data->config->power_lsb_factor *
+			     data->current_lsb_uA;
+	mutex_unlock(&data->config_lock);
+
+	return 0;
+}
+
+static ssize_t ina2xx_store_shunt(struct device *dev,
+				  struct device_attribute *da,
+				  const char *buf, size_t count)
 {
 	unsigned long val;
 	int status;
@@ -316,18 +341,9 @@ static ssize_t ina2xx_set_shunt(struct device *dev,
 	if (status < 0)
 		return status;
 
-	if (val == 0 ||
-	    /* Values greater than the calibration factor make no sense. */
-	    val > data->config->calibration_factor)
-		return -EINVAL;
-
-	mutex_lock(&data->config_lock);
-	data->rshunt = val;
-	status = ina2xx_calibrate(data);
-	mutex_unlock(&data->config_lock);
+	status = ina2xx_set_shunt(data, val);
 	if (status < 0)
 		return status;
-
 	return count;
 }
 
@@ -387,7 +403,7 @@ static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ina2xx_show_value, NULL,
 
 /* shunt resistance */
 static SENSOR_DEVICE_ATTR(shunt_resistor, S_IRUGO | S_IWUSR,
-			  ina2xx_show_value, ina2xx_set_shunt,
+			  ina2xx_show_value, ina2xx_store_shunt,
 			  INA2XX_CALIBRATION);
 
 /* update interval (ina226 only) */
@@ -438,6 +454,7 @@ static int ina2xx_probe(struct i2c_client *client,
 
 	/* set the device type */
 	data->config = &ina2xx_config[chip];
+	mutex_init(&data->config_lock);
 
 	if (of_property_read_u32(dev->of_node, "shunt-resistor", &val) < 0) {
 		struct ina2xx_platform_data *pdata = dev_get_platdata(dev);
@@ -448,10 +465,7 @@ static int ina2xx_probe(struct i2c_client *client,
 			val = INA2XX_RSHUNT_DEFAULT;
 	}
 
-	if (val <= 0 || val > data->config->calibration_factor)
-		return -ENODEV;
-
-	data->rshunt = val;
+	ina2xx_set_shunt(data, val);
 
 	ina2xx_regmap_config.max_register = data->config->registers;
 
@@ -467,8 +481,6 @@ static int ina2xx_probe(struct i2c_client *client,
 		return -ENODEV;
 	}
 
-	mutex_init(&data->config_lock);
-
 	data->groups[group++] = &ina2xx_group;
 	if (id->driver_data == ina226)
 		data->groups[group++] = &ina226_group;
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 0721e175664a..06b4e1c78bd8 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -86,6 +86,7 @@ static const struct tctl_offset tctl_offset_table[] = {
 	{ 0x17, "AMD Ryzen 7 1800X", 20000 },
 	{ 0x17, "AMD Ryzen Threadripper 1950X", 27000 },
 	{ 0x17, "AMD Ryzen Threadripper 1920X", 27000 },
+	{ 0x17, "AMD Ryzen Threadripper 1900X", 27000 },
 	{ 0x17, "AMD Ryzen Threadripper 1950", 10000 },
 	{ 0x17, "AMD Ryzen Threadripper 1920", 10000 },
 	{ 0x17, "AMD Ryzen Threadripper 1910", 10000 },
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 005ffb5ffa92..49f4b33a5685 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -100,7 +100,7 @@ static int lm75_read(struct device *dev, enum hwmon_sensor_types type,
 		switch (attr) {
 		case hwmon_chip_update_interval:
 			*val = data->sample_time;
-			break;;
+			break;
 		default:
 			return -EINVAL;
 		}
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 08479006c7f9..6e4298e99222 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/