PCI: Change all drivers to use pci_device->revision

Instead of all drivers reading pci config space to get the revision
ID, they can now use the pci_device->revision member.

This exposes some issues where drivers where reading a word or a dword
for the revision number, and adding useless error-handling around the
read. Some drivers even just read it for no purpose of all.

In devices where the revision ID is being copied over and used in what
appears to be the equivalent of hotpath, I have left the copy code
and the cached copy as not to influence the driver's performance.

Compile tested with make all{yes,mod}config on x86_64 and i386.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

94 files changed, 190 insertions, 459 deletions

diff --git a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
index 0d49d73d1b71..66acd5039918 100644
--- a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -391,8 +391,6 @@ static struct cpufreq_driver nforce2_driver = {
  */
 static unsigned int nforce2_detect_chipset(void)
 {
-	u8 revision;
-
 	nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
 					PCI_DEVICE_ID_NVIDIA_NFORCE2,
 					PCI_ANY_ID, PCI_ANY_ID, NULL);
@@ -400,10 +398,8 @@ static unsigned int nforce2_detect_chipset(void)
 	if (nforce2_chipset_dev == NULL)
 		return -ENODEV;
 
-	pci_read_config_byte(nforce2_chipset_dev, PCI_REVISION_ID, &revision);
-
 	printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n",
-	       revision);
+	       nforce2_chipset_dev->revision);
 	printk(KERN_INFO
 	       "cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss.\n");
 
diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
index 6667e9cceb9f..194144539a6f 100644
--- a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
+++ b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
@@ -115,7 +115,6 @@ struct gxfreq_params {
 	u8 pci_suscfg;
 	u8 pci_pmer1;
 	u8 pci_pmer2;
-	u8 pci_rev;
 	struct pci_dev *cs55x0;
 };
 
@@ -276,7 +275,7 @@ static void gx_set_cpuspeed(unsigned int khz)
 			pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */
 			pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1);
 
-			if (gx_params->pci_rev < 0x10) {   /* CS5530(rev 1.2, 1.3) */
+			if (gx_params->cs55x0->revision < 0x10) {   /* CS5530(rev 1.2, 1.3) */
 				suscfg = gx_params->pci_suscfg | SUSMOD;
 			} else {                           /* CS5530A,B.. */
 				suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE;
@@ -471,7 +470,6 @@ static int __init cpufreq_gx_init(void)
 	pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
 	pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
 	pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration));
-	pci_read_config_byte(params->cs55x0, PCI_REVISION_ID, &params->pci_rev);
 
 	if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
 		kfree(params);
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
index 698f980eb443..a5b2346faf1f 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
@@ -205,7 +205,6 @@ static unsigned int speedstep_detect_chipset (void)
 		 * host brige. Abort on these systems.
 		 */
 		static struct pci_dev *hostbridge;
-		u8 rev = 0;
 
 		hostbridge  = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 			      PCI_DEVICE_ID_INTEL_82815_MC,
@@ -216,8 +215,7 @@ static unsigned int speedstep_detect_chipset (void)
 		if (!hostbridge)
 			return 2; /* 2-M */
 
-		pci_read_config_byte(hostbridge, PCI_REVISION_ID, &rev);
-		if (rev < 5) {
+		if (hostbridge->revision < 5) {
 			dprintk("hostbridge does not support speedstep\n");
 			speedstep_chipset_dev = NULL;
 			pci_dev_put(hostbridge);
diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
index b95b42950ed4..e7306dbf6c42 100644
--- a/arch/i386/pci/fixup.c
+++ b/arch/i386/pci/fixup.c
@@ -118,12 +118,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, pci
 static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
 {
 	u8 v;
-	u8 revision;
 	int where = 0x55;
 	int mask = 0x1f; /* clear bits 5, 6, 7 by default */
 
-	pci_read_config_byte(d, PCI_REVISION_ID, &revision);
-
 	if (d->device == PCI_DEVICE_ID_VIA_8367_0) {
 		/* fix pci bus latency issues resulted by NB bios error
 		   it appears on bug free^Wreduced kt266x's bios forces
@@ -133,8 +130,8 @@ static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
 		where = 0x95; /* the memory write queue timer register is 
 				different for the KT266x's: 0x95 not 0x55 */
 	} else if (d->device == PCI_DEVICE_ID_VIA_8363_0 &&
-			(revision == VIA_8363_KL133_REVISION_ID || 
-			revision == VIA_8363_KM133_REVISION_ID)) {
+			(d->revision == VIA_8363_KL133_REVISION_ID ||
+			d->revision == VIA_8363_KM133_REVISION_ID)) {
 			mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5
 					causes screen corruption on the KL133/KM133 */
 	}
@@ -142,7 +139,7 @@ static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
 	pci_read_config_byte(d, where, &v);
 	if (v & ~mask) {
 		printk(KERN_WARNING "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \
-			d->device, revision, where, v, mask, v & mask);
+			d->device, d->revision, where, v, mask, v & mask);
 		v &= mask;
 		pci_write_config_byte(d, where, v);
 	}
diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
index 7fc475f7eae5..76b4f0ffb1e5 100644
--- a/arch/mips/pci/fixup-cobalt.c
+++ b/arch/mips/pci/fixup-cobalt.c
@@ -58,8 +58,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
 
 static void qube_raq_galileo_fixup(struct pci_dev *dev)
 {
-	unsigned short galileo_id;
-
 	if (dev->devfn != PCI_DEVFN(0, 0))
 		return;
 
@@ -84,16 +82,14 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev)
 	 * Therefore we must set the disconnect/retry cycle values to
 	 * something sensible when using the new Galileo.
 	 */
-	pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id);
-	galileo_id &= 0xff;	/* mask off class info */
 
- 	printk(KERN_INFO "Galileo: revision %u\n", galileo_id);
+ 	printk(KERN_INFO "Galileo: revision %u\n", dev->revision);
 
 #if 0
-	if (galileo_id >= 0x10) {
+	if (dev->revision >= 0x10) {
 		/* New Galileo, assumes PCI stop line to VIA is connected. */
 		GT_WRITE(GT_PCI0_TOR_OFS, 0x4020);
-	} else if (galileo_id == 0x1 || galileo_id == 0x2)
+	} else if (dev->revision == 0x1 || dev->revision == 0x2)
 #endif
 	{
 		signed int timeo;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index f7de02a6f497..e1ca86dfdd66 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -115,7 +115,6 @@ struct acpi_processor_errata errata __read_mostly;
 
 static int acpi_processor_errata_piix4(struct pci_dev *dev)
 {
-	u8 rev = 0;
 	u8 value1 = 0;
 	u8 value2 = 0;
 
@@ -127,9 +126,7 @@ static int acpi_processor_errata_piix4(struct pci_dev *dev)
 	 * Note that 'dev' references the PIIX4 ACPI Controller.
 	 */
 
-	pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-
-	switch (rev) {
+	switch (dev->revision) {
 	case 0:
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
 		break;
@@ -147,7 +144,7 @@ static int acpi_processor_errata_piix4(struct pci_dev *dev)
 		break;
 	}
 
-	switch (rev) {
+	switch (dev->revision) {
 
 	case 0:		/* PIIX4 A-step */
 	case 1:		/* PIIX4 B-step */
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 6a3bfef58e13..2610db75f984 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -928,20 +928,18 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev)
 {
 	struct pci_dev *pdev = NULL;
 	u16 cfg;
-	u8 rev;
 	int no_piix_dma = 0;
 
 	while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL)
 	{
 		/* Look for 450NX PXB. Check for problem configurations
 		   A PCI quirk checks bit 6 already */
-		pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
 		pci_read_config_word(pdev, 0x41, &cfg);
 		/* Only on the original revision: IDE DMA can hang */
-		if (rev == 0x00)
+		if (pdev->revision == 0x00)
 			no_piix_dma = 1;
 		/* On all revisions below 5 PXB bus lock must be disabled for IDE */
-		else if (cfg & (1<<14) && rev < 5)
+		else if (cfg & (1<<14) && pdev->revision < 5)
 			no_piix_dma = 2;
 	}
 	if (no_piix_dma)
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 30c4276ec882..010436795d20 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -455,23 +455,21 @@ static struct ata_port_operations ali_c5_port_ops = {
 
 static void ali_init_chipset(struct pci_dev *pdev)
 {
-	u8 rev, tmp;
+	u8 tmp;
 	struct pci_dev *north, *isa_bridge;
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
 	/*
 	 * The chipset revision selects the driver operations and
 	 * mode data.
 	 */
 
-	if (rev >= 0x20 && rev < 0xC2) {
+	if (pdev->revision >= 0x20 && pdev->revision < 0xC2) {
 		/* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
 		pci_read_config_byte(pdev, 0x4B, &tmp);
 		/* Clear CD-ROM DMA write bit */
 		tmp &= 0x7F;
 		pci_write_config_byte(pdev, 0x4B, tmp);
-	} else if (rev >= 0xC2) {
+	} else if (pdev->revision >= 0xC2) {
 		/* Enable cable detection logic */
 		pci_read_config_byte(pdev, 0x4B, &tmp);
 		pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
@@ -483,21 +481,21 @@ static void ali_init_chipset(struct pci_dev *pdev)
 		/* Configure the ALi bridge logic. For non ALi rely on BIOS.
 		   Set the south bridge enable bit */
 		pci_read_config_byte(isa_bridge, 0x79, &tmp);
-		if (rev == 0xC2)
+		if (pdev->revision == 0xC2)
 			pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
-		else if (rev > 0xC2 && rev < 0xC5)
+		else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
 			pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
 	}
-	if (rev >= 0x20) {
+	if (pdev->revision >= 0x20) {
 		/*
 		 * CD_ROM DMA on (0x53 bit 0). Enable this even if we want
 		 * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
 		 * via 0x54/55.
 		 */
 		pci_read_config_byte(pdev, 0x53, &tmp);
-		if (rev <= 0x20)
+		if (pdev->revision <= 0x20)
 			tmp &= ~0x02;
-		if (rev >= 0xc7)
+		if (pdev->revision >= 0xc7)
 			tmp |= 0x03;
 		else
 			tmp |= 0x01;	/* CD_ROM enable for DMA */
@@ -579,25 +577,23 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 
 	const struct ata_port_info *ppi[] = { NULL, NULL };
-	u8 rev, tmp;
+	u8 tmp;
 	struct pci_dev *isa_bridge;
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
 	/*
 	 * The chipset revision selects the driver operations and
 	 * mode data.
 	 */
 
-	if (rev < 0x20) {
+	if (pdev->revision < 0x20) {
 		ppi[0] = &info_early;
-	} else if (rev < 0xC2) {
+	} else if (pdev->revision < 0xC2) {
         	ppi[0] = &info_20;
-	} else if (rev == 0xC2) {
+	} else if (pdev->revision == 0xC2) {
         	ppi[0] = &info_c2;
-	} else if (rev == 0xC3) {
+	} else if (pdev->revision == 0xC3) {
         	ppi[0] = &info_c3;
-	} else if (rev == 0xC4) {
+	} else if (pdev->revision == 0xC4) {
         	ppi[0] = &info_c4;
 	} else
         	ppi[0] = &info_c5;
@@ -605,7 +601,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	ali_init_chipset(pdev);
 
 	isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
-	if (isa_bridge && rev >= 0x20 && rev < 0xC2) {
+	if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
 		/* Are we paired with a UDMA capable chip */
 		pci_read_config_byte(isa_bridge, 0x5E, &tmp);
 		if ((tmp & 0x1E) == 0x12)
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index b9c44c575ce3..b09facad63e1 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -623,17 +623,15 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	const struct ata_port_info *ppi[] = { NULL, NULL };
 	static int printed_version;
 	int type = id->driver_data;
-	u8 rev;
 	u8 fifo;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
 	pci_read_config_byte(pdev, 0x41, &fifo);
 
 	/* Check for AMD7409 without swdma errata and if found adjust type */
-	if (type == 1 && rev > 0x7)
+	if (type == 1 && pdev->revision > 0x7)
 		type = 2;
 
 	/* Check for AMD7411 */
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index b67bbf6516ba..430673be1df7 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -587,8 +587,7 @@ static int it821x_port_start(struct ata_port *ap)
 	itdev->want[1][1] = ATA_ANY;
 	itdev->last_device = -1;
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &conf);
-	if (conf == 0x10) {
+	if (pdev->revision == 0x11) {
 		itdev->timing10 = 1;
 		/* Need to disable ATAPI DMA for this case */
 		if (!itdev->smart)
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 0231aba51ca4..89691541fe59 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -410,11 +410,8 @@ static int serverworks_fixup_osb4(struct pci_dev *pdev)
 
 static int serverworks_fixup_csb(struct pci_dev *pdev)
 {
-	u8 rev;
 	u8 btr;
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
 	/* Third Channel Test */
 	if (!(PCI_FUNC(pdev->devfn) & 1)) {
 		struct pci_dev * findev = NULL;
@@ -456,7 +453,7 @@ static int serverworks_fixup_csb(struct pci_dev *pdev)
 	if (!(PCI_FUNC(pdev->devfn) & 1))
 		btr |= 0x2;
 	else
-		btr |= (rev >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
+		btr |= (pdev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
 	pci_write_config_byte(pdev, 0x5A, btr);
 
 	return btr;
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 2b4508206a6c..74a021124f3c 100644
--- a/drivers/ata/pata_sis.c
+++