sh: Add SH7785 Highlander board support (R7785RP).

This adds preliminary support for the SH7785-based Highlander board.
Some of the Highlander support code is reordered so that most of it
can be reused directly.

This also plugs in missing SH7785 checks in the places that need it,
as this is the first board to support the CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

27 files changed, 1896 insertions, 144 deletions

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 51d9d0ab39c6..9932d1aa8494 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -197,12 +197,8 @@ config SH_RTS7751R2D
 	  Select RTS7751R2D if configuring for a Renesas Technology
 	  Sales SH-Graphics board.
 
-config SH_R7780RP
-	bool "R7780RP-1"
-	select CPU_SUBTYPE_SH7780
-	help
-	  Select R7780RP-1 if configuring for a Renesas Solutions
-	  HIGHLANDER board.
+config SH_HIGHLANDER
+	bool "Highlander"
 
 config SH_EDOSK7705
 	bool "EDOSK7705"
@@ -262,6 +258,10 @@ config SH_UNKNOWN
 
 endchoice
 
+source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
+source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
+source "arch/sh/boards/renesas/r7780rp/Kconfig"
+
 source "arch/sh/mm/Kconfig"
 
 config CF_ENABLER
@@ -412,8 +412,9 @@ config CPU_HAS_PTEA
 
 endmenu
 
-menu "Timer support"
-depends on !GENERIC_TIME
+menu "Timer and clock configuration"
+
+if !GENERIC_TIME
 
 config SH_TMU
 	bool "TMU timer support"
@@ -436,17 +437,11 @@ config SH_MTU2
 	help
 	  This enables the use of the MTU2 as the system timer.
 
-endmenu
-
-source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
-
-source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
-
-source "arch/sh/boards/renesas/r7780rp/Kconfig"
+endif
 
 config SH_TIMER_IRQ
 	int
-	default "28" if CPU_SUBTYPE_SH7780
+	default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
 	default "86" if CPU_SUBTYPE_SH7619
 	default "140" if CPU_SUBTYPE_SH7206
 	default "16"
@@ -476,7 +471,8 @@ config SH_PCLK_FREQ
 	default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \
 			      CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
 			      CPU_SUBTYPE_SH7206
-	default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780
+	default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780 || \
+			      CPU_SUBTYPE_SH7785
 	default "60000000" if CPU_SUBTYPE_SH7751
 	default "66000000" if CPU_SUBTYPE_SH4_202
 	help
@@ -491,6 +487,8 @@ config SH_CLK_MD
 	help
 	  MD2 - MD0 pin setting.
 
+endmenu
+
 menu "CPU Frequency scaling"
 
 source "drivers/cpufreq/Kconfig"
@@ -509,21 +507,6 @@ config SH_CPU_FREQ
 
 endmenu
 
-source "arch/sh/drivers/dma/Kconfig"
-
-source "arch/sh/cchips/Kconfig"
-
-config HEARTBEAT
-	bool "Heartbeat LED"
-	depends on SH_MPC1211 || SH_SH03 || \
-		   SOLUTION_ENGINE || \
-		   SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK || \
-		   SH_R7780RP
-	help
-	  Use the power-on LED on your machine as a load meter.  The exact
-	  behavior is platform-dependent, but normally the flash frequency is
-	  a hyperbolic function of the 5-minute load average.
-
 source "arch/sh/drivers/Kconfig"
 
 endmenu
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 0fadde283368..7eef74b1cb7b 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -102,7 +102,7 @@ machdir-$(CONFIG_SH_HS7751RVOIP)		:= renesas/hs7751rvoip
 machdir-$(CONFIG_SH_RTS7751R2D)			:= renesas/rts7751r2d
 machdir-$(CONFIG_SH_7751_SYSTEMH)		:= renesas/systemh
 machdir-$(CONFIG_SH_EDOSK7705)			:= renesas/edosk7705
-machdir-$(CONFIG_SH_R7780RP)			:= renesas/r7780rp
+machdir-$(CONFIG_SH_HIGHLANDER)			:= renesas/r7780rp
 machdir-$(CONFIG_SH_7710VOIPGW)			:= renesas/sh7710voipgw
 machdir-$(CONFIG_SH_SH4202_MICRODEV)		:= superh/microdev
 machdir-$(CONFIG_SH_LANDISK)			:= landisk
diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/renesas/r7780rp/Kconfig
index c26d9813d239..9fb11641fe13 100644
--- a/arch/sh/boards/renesas/r7780rp/Kconfig
+++ b/arch/sh/boards/renesas/r7780rp/Kconfig
@@ -1,14 +1,24 @@
-if SH_R7780RP
+if SH_HIGHLANDER
 
-menu "R7780RP options"
+choice
+	prompt "Highlander options"
+	default SH_R7780MP
+
+config SH_R7780RP
+	bool "R7780RP-1 board support"
+	select CPU_SUBTYPE_SH7780
 
 config SH_R7780MP
 	bool "R7780MP board support"
-	default y
+	select CPU_SUBTYPE_SH7780
 	help
 	  Selecting this option will enable support for the mass-production
 	  version of the R7780RP. If in doubt, say Y.
 
-endmenu
+config SH_R7785RP
+	bool "R7785RP board support"
+	select CPU_SUBTYPE_SH7785
+
+endchoice
 
 endif
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile
index ed5f5a9a3b3e..609e5d50dde8 100644
--- a/arch/sh/boards/renesas/r7780rp/Makefile
+++ b/arch/sh/boards/renesas/r7780rp/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for the R7780RP-1 specific parts of the kernel
 #
-
-obj-y	 := setup.o irq.o
-
+irqinit-y			:= irq-r7780rp.o
+irqinit-$(CONFIG_SH_R7785RP)	:= irq-r7785rp.o
 obj-$(CONFIG_PUSH_SWITCH)	+= psw.o
+obj-y	 			:= setup.o irq.o $(irqinit-y)
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
new file mode 100644
index 000000000000..f5f358746c9e
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
@@ -0,0 +1,21 @@
+/*
+ * Renesas Solutions Highlander R7780RP-1 Support.
+ *
+ * Copyright (C) 2002  Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/r7780rp.h>
+
+void __init highlander_init_irq(void)
+{
+	int i;
+
+	for (i = 0; i < 15; i++)
+		make_r7780rp_irq(i);
+}
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
new file mode 100644
index 000000000000..dd6ec4ce44dc
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
@@ -0,0 +1,29 @@
+/*
+ * Renesas Solutions Highlander R7780RP-1 Support.
+ *
+ * Copyright (C) 2002  Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/r7780rp.h>
+
+void __init highlander_init_irq(void)
+{
+	ctrl_outw(0x0000, PA_IRLSSR1);	/* FPGA IRLSSR1(CF_CD clear) */
+
+	/* Setup the FPGA IRL */
+	ctrl_outw(0x0000, PA_IRLPRA);	/* FPGA IRLA */
+	ctrl_outw(0xe598, PA_IRLPRB);	/* FPGA IRLB */
+	ctrl_outw(0x7060, PA_IRLPRC);	/* FPGA IRLC */
+	ctrl_outw(0x0000, PA_IRLPRD);	/* FPGA IRLD */
+	ctrl_outw(0x4321, PA_IRLPRE);	/* FPGA IRLE */
+	ctrl_outw(0x0000, PA_IRLPRF);	/* FPGA IRLF */
+
+	make_r7780rp_irq(1);	/* CF card */
+	make_r7780rp_irq(10);	/* On-board ethernet */
+}
diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c
index cc381e197783..e0b8eb52f376 100644
--- a/arch/sh/boards/renesas/r7780rp/irq.c
+++ b/arch/sh/boards/renesas/r7780rp/irq.c
@@ -14,10 +14,12 @@
 #include <linux/io.h>
 #include <asm/r7780rp.h>
 
-#ifdef CONFIG_SH_R7780MP
-static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0};
-#else
+#ifdef CONFIG_SH_R7780RP
 static int mask_pos[] = {15, 14, 13, 12, 11, 10, 9, 8, 7, 5, 6, 4, 0, 1, 2, 0};
+#elif defined(CONFIG_SH_R7780MP)
+static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0};
+#elif defined(CONFIG_SH_R7785RP)
+static int mask_pos[] = {2, 11, 2, 2, 2, 2, 9, 8, 7, 5, 10, 2, 2, 2, 2, 2};
 #endif
 
 static void enable_r7780rp_irq(unsigned int irq)
@@ -40,17 +42,10 @@ static struct irq_chip r7780rp_irq_chip __read_mostly = {
 	.mask_ack	= disable_r7780rp_irq,
 };
 
-/*
- * Initialize IRQ setting
- */
-void __init init_r7780rp_IRQ(void)
+void make_r7780rp_irq(unsigned int irq)
 {
-	int i;
-
-	for (i = 0; i < 15; i++) {
-		disable_irq_nosync(i);
-		set_irq_chip_and_handler_name(i, &r7780rp_irq_chip,
-					      handle_level_irq, "level");
-		enable_r7780rp_irq(i);
-	}
+	disable_irq_nosync(irq);
+	set_irq_chip_and_handler_name(irq, &r7780rp_irq_chip,
+				      handle_level_irq, "level");
+	enable_r7780rp_irq(irq);
 }
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
index 2faba6679e64..6af0cc35ceb7 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -1,10 +1,13 @@
 /*
  * arch/sh/boards/renesas/r7780rp/setup.c
  *
+ * Renesas Solutions Highlander Support.
+ *
  * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
  * Copyright (C) 2005 - 2007 Paul Mundt
  *
- * Renesas Solutions Highlander R7780RP-1 Support.
+ * This contains support for the R7780RP-1, R7780MP, and R7785RP
+ * Highlander modules.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -18,32 +21,6 @@
 #include <asm/clock.h>
 #include <asm/io.h>
 
-extern void init_r7780rp_IRQ(void);
-
-static struct resource m66596_usb_host_resources[] = {
-	[0] = {
-		.start	= 0xa4800000,
-		.end	= 0xa4ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 6,		/* irq number */
-		.end	= 6,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device m66596_usb_host_device = {
-	.name		= "m66596-hcd",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= NULL,		/* don't use dma */
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(m66596_usb_host_resources),
-	.resource	= m66596_usb_host_resources,
-};
-
 static struct resource cf_ide_resources[] = {
 	[0] = {
 		.start	= PA_AREA5_IO + 0x1000,
@@ -56,10 +33,10 @@ static struct resource cf_ide_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[2] = {
-#ifdef CONFIG_SH_R7780MP
-		.start	= 1,
-#else
+#ifdef CONFIG_SH_R7780RP
 		.start	= 4,
+#else
+		.start	= 1,
 #endif
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -92,15 +69,18 @@ static struct resource heartbeat_resources[] = {
 static struct platform_device heartbeat_device = {
 	.name		= "heartbeat",
 	.id		= -1,
+
+	/* R7785RP has a slightly more sensible FPGA.. */
+#ifndef CONFIG_SH_R7785RP
 	.dev	= {
 		.platform_data	= heartbeat_bit_pos,
 	},
+#endif
 	.num_resources	= ARRAY_SIZE(heartbeat_resources),
 	.resource	= heartbeat_resources,
 };
 
 static struct platform_device *r7780rp_devices[] __initdata = {
-	&m66596_usb_host_device,
 	&cf_ide_device,
 	&heartbeat_device,
 };
@@ -110,6 +90,7 @@ static int __init r7780rp_devices_setup(void)
 	return platform_add_devices(r7780rp_devices,
 				    ARRAY_SIZE(r7780rp_devices));
 }
+device_initcall(r7780rp_devices_setup);
 
 /*
  * Platform specific clocks
@@ -140,22 +121,22 @@ static struct clk *r7780rp_clocks[] = {
 
 static void r7780rp_power_off(void)
 {
-#ifdef CONFIG_SH_R7780MP
-	ctrl_outw(0x0001, PA_POFF);
-#endif
+	if (mach_is_r7780mp() || mach_is_r7785rp())
+		ctrl_outw(0x0001, PA_POFF);
 }
 
 /*
  * Initialize the board
  */
-static void __init r7780rp_setup(char **cmdline_p)
+static void __init highlander_setup(char **cmdline_p)
 {
 	u16 ver = ctrl_inw(PA_VERREG);
 	int i;
 
-	device_initcall(r7780rp_devices_setup);
-
-	printk(KERN_INFO "Renesas Solutions Highlander R7780RP-1 support.\n");
+	printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
+			 mach_is_r7780rp() ? "R7780RP-1" :
+			 mach_is_r7780mp() ? "R7780MP"	 :
+					     "R7785RP");
 
 	printk(KERN_INFO "Board version: %d (revision %d), "
 			 "FPGA version: %d (revision %d)\n",
@@ -173,9 +154,10 @@ static void __init r7780rp_setup(char **cmdline_p)
 	}
 
 	ctrl_outw(0x0000, PA_OBLED);	/* Clear LED. */
-#ifndef CONFIG_SH_R7780MP
-	ctrl_outw(0x0001, PA_SDPOW);	/* SD Power ON */
-#endif
+
+	if (mach_is_r7780rp())
+		ctrl_outw(0x0001, PA_SDPOW);	/* SD Power ON */
+
 	ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL);	/* Si13112 */
 
 	pm_power_off = r7780rp_power_off;
@@ -184,10 +166,10 @@ static void __init r7780rp_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_r7780rp __initmv = {
-	.mv_name		= "Highlander R7780RP-1",
-	.mv_setup		= r7780rp_setup,
+struct sh_machine_vector mv_highlander __initmv = {
+	.mv_name		= "Highlander",
 	.mv_nr_irqs		= 109,
-	.mv_init_irq		= init_r7780rp_IRQ,
+	.mv_setup		= highlander_setup,
+	.mv_init_irq		= highlander_init_irq,
 };
-ALIAS_MV(r7780rp)
+ALIAS_MV(highlander)
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
new file mode 100644
index 000000000000..0f5ec649daf8
--- /dev/null
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -0,0 +1,1334 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-rc3
+# Mon Mar 12 14:26:33 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_7343_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+CONFIG_SH_HIGHLANDER=y
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
+# CONFIG_SH_UNKNOWN is not set
+# CONFIG_SH_R7780RP is not set
+# CONFIG_SH_R7780MP is not set
+CONFIG_SH_R7785RP=y
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+
+#
+# SH4AL-DSP Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_32BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+CONFIG_HUGETLB_PAGE_SIZE_1MB=y
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_DSP is not set
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_INTC2_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_NO_IDLE_HZ=y
+CONFIG_SH_PCLK_FREQ=50000000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+CONFIG_PUSH_SWITCH=y
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_KEXEC=y
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set