x86, intel-mid: remove Intel MID specific serial support

Since we have a native 8250 driver carrying the Intel MID serial devices the
specific support is not needed anymore. This patch removes it for Intel MID.

Note that the console device name is changed from ttyMFDx to ttySx.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

10 files changed, 0 insertions, 1708 deletions

diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 20028da8ae18..72484a645f05 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -43,10 +43,6 @@ config EARLY_PRINTK
 	  with klogd/syslogd or the X server. You should normally N here,
 	  unless you want to debug such a crash.
 
-config EARLY_PRINTK_INTEL_MID
-	bool "Early printk for Intel MID platform support"
-	depends on EARLY_PRINTK && X86_INTEL_MID
-
 config EARLY_PRINTK_DBGP
 	bool "Early printk via EHCI debug port"
 	depends on EARLY_PRINTK && PCI
diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index 705d35708a50..7c5af123bdbd 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -136,9 +136,6 @@ extern enum intel_mid_timer_options intel_mid_timer_options;
 #define SFI_MTMR_MAX_NUM 8
 #define SFI_MRTC_MAX	8
 
-extern struct console early_hsu_console;
-extern void hsu_early_console_init(const char *);
-
 extern void intel_scu_devices_create(void);
 extern void intel_scu_devices_destroy(void);
 
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index a62536a1be88..f85e3fb50f28 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -375,12 +375,6 @@ static int __init setup_early_printk(char *buf)
 		if (!strncmp(buf, "xen", 3))
 			early_console_register(&xenboot_console, keep);
 #endif
-#ifdef CONFIG_EARLY_PRINTK_INTEL_MID
-		if (!strncmp(buf, "hsu", 3)) {
-			hsu_early_console_init(buf + 3);
-			early_console_register(&early_hsu_console, keep);
-		}
-#endif
 #ifdef CONFIG_EARLY_PRINTK_EFI
 		if (!strncmp(buf, "efi", 3))
 			early_console_register(&early_efi_console, keep);
diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile
index 0a8ee703b9fa..0ce1b1913673 100644
--- a/arch/x86/platform/intel-mid/Makefile
+++ b/arch/x86/platform/intel-mid/Makefile
@@ -1,5 +1,4 @@
 obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o mrfl.o
-obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_intel_mid.o
 
 # SFI specific code
 ifdef CONFIG_X86_INTEL_MID
diff --git a/arch/x86/platform/intel-mid/early_printk_intel_mid.c b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
deleted file mode 100644
index 4e720829ab90..000000000000
--- a/arch/x86/platform/intel-mid/early_printk_intel_mid.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * early_printk_intel_mid.c - early consoles for Intel MID platforms
- *
- * Copyright (c) 2008-2010, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-/*
- * This file implements early console named hsu.
- * hsu is based on a High Speed UART device which only exists in the Medfield
- * platform
- */
-
-#include <linux/serial_reg.h>
-#include <linux/serial_mfd.h>
-#include <linux/console.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/fixmap.h>
-#include <asm/pgtable.h>
-#include <asm/intel-mid.h>
-
-/*
- * Following is the early console based on Medfield HSU (High
- * Speed UART) device.
- */
-#define HSU_PORT_BASE		0xffa28080
-
-static void __iomem *phsu;
-
-void hsu_early_console_init(const char *s)
-{
-	unsigned long paddr, port = 0;
-	u8 lcr;
-
-	/*
-	 * Select the early HSU console port if specified by user in the
-	 * kernel command line.
-	 */
-	if (*s && !kstrtoul(s, 10, &port))
-		port = clamp_val(port, 0, 2);
-
-	paddr = HSU_PORT_BASE + port * 0x80;
-	phsu = (void __iomem *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr);
-
-	/* Disable FIFO */
-	writeb(0x0, phsu + UART_FCR);
-
-	/* Set to default 115200 bps, 8n1 */
-	lcr = readb(phsu + UART_LCR);
-	writeb((0x80 | lcr), phsu + UART_LCR);
-	writeb(0x18, phsu + UART_DLL);
-	writeb(lcr,  phsu + UART_LCR);
-	writel(0x3600, phsu + UART_MUL*4);
-
-	writeb(0x8, phsu + UART_MCR);
-	writeb(0x7, phsu + UART_FCR);
-	writeb(0x3, phsu + UART_LCR);
-
-	/* Clear IRQ status */
-	readb(phsu + UART_LSR);
-	readb(phsu + UART_RX);
-	readb(phsu + UART_IIR);
-	readb(phsu + UART_MSR);
-
-	/* Enable FIFO */
-	writeb(0x7, phsu + UART_FCR);
-}
-
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
-static void early_hsu_putc(char ch)
-{
-	unsigned int timeout = 10000; /* 10ms */
-	u8 status;
-
-	while (--timeout) {
-		status = readb(phsu + UART_LSR);
-		if (status & BOTH_EMPTY)
-			break;
-		udelay(1);
-	}
-
-	/* Only write the char when there was no timeout */
-	if (timeout)
-		writeb(ch, phsu + UART_TX);
-}
-
-static void early_hsu_write(struct console *con, const char *str, unsigned n)
-{
-	int i;
-
-	for (i = 0; i < n && *str; i++) {
-		if (*str == '\n')
-			early_hsu_putc('\r');
-		early_hsu_putc(*str);
-		str++;
-	}
-}
-
-struct console early_hsu_console = {
-	.name =		"earlyhsu",
-	.write =	early_hsu_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 60c368a5dbf1..c9dbc626038d 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -483,16 +483,6 @@ config SERIAL_SA1100_CONSOLE
 	  your boot loader (lilo or loadlin) about how to pass options to the
 	  kernel at boot time.)
 
-config SERIAL_MFD_HSU
-	tristate "Medfield High Speed UART support"
-	depends on PCI
-	select SERIAL_CORE
-
-config SERIAL_MFD_HSU_CONSOLE
-	bool "Medfield HSU serial console support"
-	depends on SERIAL_MFD_HSU=y
-	select SERIAL_CORE_CONSOLE
-
 config SERIAL_BFIN
 	tristate "Blackfin serial port support"
 	depends on BLACKFIN
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 599be4b05a26..f42b4f9845df 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -78,7 +78,6 @@ obj-$(CONFIG_SERIAL_TIMBERDALE)	+= timbuart.o
 obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
 obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
 obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o
-obj-$(CONFIG_SERIAL_MFD_HSU)	+= mfd.o
 obj-$(CONFIG_SERIAL_IFX6X60)  	+= ifx6x60.o
 obj-$(CONFIG_SERIAL_PCH_UART)	+= pch_uart.o
 obj-$(CONFIG_SERIAL_MSM_SMD)	+= msm_smd_tty.o
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
deleted file mode 100644
index 8fe4501d7565..000000000000
--- a/drivers/tty/serial/mfd.c
+++ /dev/null
@@ -1,1505 +0,0 @@
-/*
- * mfd.c: driver for High Speed UART device of Intel Medfield platform
- *
- * Refer pxa.c, 8250.c and some other drivers in drivers/serial/
- *
- * (C) Copyright 2010 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-/* Notes:
- * 1. DMA channel allocation: 0/1 channel are assigned to port 0,
- *    2/3 chan to port 1, 4/5 chan to port 3. Even number chans
- *    are used for RX, odd chans for TX
- *
- * 2. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always
- *    asserted, only when the HW is reset the DDCD and DDSR will
- *    be triggered
- */
-
-#if defined(CONFIG_SERIAL_MFD_HSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/slab.h>
-#include <linux/serial_reg.h>
-#include <linux/circ_buf.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-#include <linux/serial_mfd.h>
-#include <linux/dma-mapping.h>
-#include <linux/pci.h>
-#include <linux/nmi.h>
-#include <linux/io.h>
-#include <linux/debugfs.h>
-#include <linux/pm_runtime.h>
-
-#define HSU_DMA_BUF_SIZE	2048
-
-#define chan_readl(chan, offset)	readl(chan->reg + offset)
-#define chan_writel(chan, offset, val)	writel(val, chan->reg + offset)
-
-#define mfd_readl(obj, offset)		readl(obj->reg + offset)
-#define mfd_writel(obj, offset, val)	writel(val, obj->reg + offset)
-
-static int hsu_dma_enable;
-module_param(hsu_dma_enable, int, 0);
-MODULE_PARM_DESC(hsu_dma_enable,
-		 "It is a bitmap to set working mode, if bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode.");
-
-struct hsu_dma_buffer {
-	u8		*buf;
-	dma_addr_t	dma_addr;
-	u32		dma_size;
-	u32		ofs;
-};
-
-struct hsu_dma_chan {
-	u32	id;
-	enum dma_data_direction	dirt;
-	struct uart_hsu_port	*uport;
-	void __iomem		*reg;
-};
-
-struct uart_hsu_port {
-	struct uart_port        port;
-	unsigned char           ier;
-	unsigned char           lcr;
-	unsigned char           mcr;
-	unsigned int            lsr_break_flag;
-	char			name[12];
-	int			index;
-	struct device		*dev;
-
-	struct hsu_dma_chan	*txc;
-	struct hsu_dma_chan	*rxc;
-	struct hsu_dma_buffer	txbuf;
-	struct hsu_dma_buffer	rxbuf;
-	int			use_dma;	/* flag for DMA/PIO */
-	int			running;
-	int			dma_tx_on;
-};
-
-/* Top level data structure of HSU */
-struct hsu_port {
-	void __iomem	*reg;
-	unsigned long	paddr;
-	unsigned long	iolen;
-	u32		irq;
-
-	struct uart_hsu_port	port[3];
-	struct hsu_dma_chan	chans[10];
-
-	struct dentry *debugfs;
-};
-
-static inline unsigned int serial_in(struct uart_hsu_port *up, int offset)
-{
-	unsigned int val;
-
-	if (offset > UART_MSR) {
-		offset <<= 2;
-		val = readl(up->port.membase + offset);
-	} else
-		val = (unsigned int)readb(up->port.membase + offset);
-
-	return val;
-}
-
-static inline void serial_out(struct uart_hsu_port *up, int offset, int value)
-{
-	if (offset > UART_MSR) {
-		offset <<= 2;
-		writel(value, up->port.membase + offset);
-	} else {
-		unsigned char val = value & 0xff;
-		writeb(val, up->port.membase + offset);
-	}
-}
-
-#ifdef CONFIG_DEBUG_FS
-
-#define HSU_REGS_BUFSIZE	1024
-
-
-static ssize_t port_show_regs(struct file *file, char __user *user_buf,
-				size_t count, loff_t *ppos)
-{
-	struct uart_hsu_port *up = file->private_data;
-	char *buf;
-	u32 len = 0;
-	ssize_t ret;
-
-	buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL);
-	if (!buf)
-		return 0;
-
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"MFD HSU port[%d] regs:\n", up->index);
-
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"=================================\n");
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"IER: \t\t0x%08x\n", serial_in(up, UART_IER));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"IIR: \t\t0x%08x\n", serial_in(up, UART_IIR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"LCR: \t\t0x%08x\n", serial_in(up, UART_LCR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"MCR: \t\t0x%08x\n", serial_in(up, UART_MCR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"LSR: \t\t0x%08x\n", serial_in(up, UART_LSR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"MSR: \t\t0x%08x\n", serial_in(up, UART_MSR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"FOR: \t\t0x%08x\n", serial_in(up, UART_FOR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"PS: \t\t0x%08x\n", serial_in(up, UART_PS));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"MUL: \t\t0x%08x\n", serial_in(up, UART_MUL));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"DIV: \t\t0x%08x\n", serial_in(up, UART_DIV));
-
-	if (len > HSU_REGS_BUFSIZE)
-		len = HSU_REGS_BUFSIZE;
-
-	ret =  simple_read_from_buffer(user_buf, count, ppos, buf, len);
-	kfree(buf);
-	return ret;
-}
-
-static ssize_t dma_show_regs(struct file *file, char __user *user_buf,
-				size_t count, loff_t *ppos)
-{
-	struct hsu_dma_chan *chan = file->private_data;
-	char *buf;
-	u32 len = 0;
-	ssize_t ret;
-
-	buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL);
-	if (!buf)
-		return 0;
-
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"MFD HSU DMA channel [%d] regs:\n", chan->id);
-
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"=================================\n");
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"CR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_CR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"DCR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_DCR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"BSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_BSR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"MOTSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_MOTSR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0SAR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0TSR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1SAR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1TSR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2SAR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2TSR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3SAR));
-	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
-			"D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR));
-
-	if (len > HSU_REGS_BUFSIZE)
-		len = HSU_REGS_BUFSIZE;
-
-	ret =  simple_read_from_buffer(user_buf, count, ppos, buf, len);
-	kfree(buf);
-	return ret;
-}
-
-static const struct file_operations port_regs_ops = {
-	.owner		= THIS_MODULE,
-	.open		= simple_open,
-	.read		= port_show_regs,
-	.llseek		= default_llseek,
-};
-
-static const struct file_operations dma_regs_ops = {
-	.owner		= THIS_MODULE,
-	.open		= simple_open,
-	.read		= dma_show_regs,
-	.llseek		= default_llseek,
-};
-
-static int hsu_debugfs_init(struct hsu_port *hsu)
-{
-	int i;
-	char name[32];
-
-	hsu->debugfs = debugfs_create_dir("hsu", NULL);
-	if (!hsu->debugfs)
-		return -ENOMEM;
-
-	for (i = 0; i < 3; i++) {
-		snprintf(name, sizeof(name), "port_%d_regs", i);
-		debugfs_create_file(name, S_IFREG | S_IRUGO,
-			hsu->debugfs, (void *)(&hsu->port[i]), &port_regs_ops);
-	}
-
-	for (i = 0; i < 6; i++) {
-		snprintf(name, sizeof(name), "dma_chan_%d_regs", i);
-		debugfs_create_file(name, S_IFREG | S_IRUGO,
-			hsu->debugfs, (void *)&hsu->chans[i], &dma_regs_ops);
-	}
-
-	return 0;
-}
-
-static void hsu_debugfs_remove(struct hsu_port *hsu)
-{
-	if (hsu->debugfs)
-		debugfs_remove_recursive(hsu->debugfs);
-}
-
-#else
-static inline int hsu_debugfs_init(struct hsu_port *hsu)
-{
-	return 0;
-}
-
-static inline void hsu_debugfs_remove(struct hsu_port *hsu)
-{
-}
-#endif /* CONFIG_DEBUG_FS */
-
-static void serial_hsu_enable_ms(struct uart_port *port)
-{
-	struct uart_hsu_port *up =
-		container_of(port, struct uart_hsu_port, port);
-
-	up->ier |= UART_IER_MSI;
-	serial_out(up, UART_IER, up->ier);
-}
-
-static void hsu_dma_tx(struct uart_hsu_port *up)
-{
-	struct circ_buf *xmit = &up->port.state->xmit;
-	struct hsu_dma_buffer *dbuf = &up->txbuf;
-	int count;
-
-	/* test_and_set_bit may be better, but anyway it's in lock protected mode */
-	if (up->dma_tx_on)
-		return;
-
-	/* Update the circ buf info */
-	xmit->tail += dbuf->ofs;
-	xmit->tail &= UART_XMIT_SIZE - 1;
-
-	up->port.icount.tx += dbuf->ofs;
-	dbuf->ofs = 0;
-
-	/* Disable the channel */
-	chan_writel(up->txc, HSU_CH_CR, 0x0);
-
-	if (!uart_circ_empty(xmit) && !uart_tx_stopped(&up->port)) {
-		dma_sync_single_for_device(up->port.dev,
-					   dbuf->dma_addr,
-					   dbuf->dma_size,
-					   DMA_TO_DEVICE);
-
-		count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
-		dbuf->ofs = count;
-
-		/* Reprogram the channel */
-		chan_writel(up->txc, HSU_CH_D0SAR, dbuf->dma_addr + xmit->tail);
-		chan_writel(up->txc, HSU_CH_D0TSR, count);
-
-		/* Reenable the channel */
-		chan_writel(up->txc, HSU_CH_DCR, 0x1
-						 | (0x1 << 8)
-						 | (0x1 << 16)
-						 | (0x1 << 24));
-		up->dma_tx_on = 1;
-		chan_writel(up->txc, HSU_CH_CR, 0x1);
-	}
-
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(&up->port);
-}
-
-/* The buffer is already cache coherent */
-static void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc,
-					struct hsu_dma_buffer *dbuf)
-{
-	dbuf->ofs = 0;
-
-	chan_writel(rxc, HSU_CH_BSR, 32);
-	chan_writel(rxc, HSU_CH_MOTSR, 4);
-
-	chan_writel(rxc, HSU_CH_D0SAR, dbuf->dma_addr);
-	chan_writel(rxc, HSU_CH_D0TSR, dbuf->dma_size);
-	chan_writel(rxc, HSU_CH_DCR, 0x1 | (0x1 << 8)
-					 | (0x1 << 16)
-					 | (0x1 << 24)	/* timeout bit, see HSU Errata 1 */
-					 );
-	chan_writel(rxc, HSU_CH_CR, 0x3);
-}
-
-/* Protected by spin_lock_irqsave(port->lock) */
-static void serial_hsu_start_tx(struct uart_port *port)
-{
-	struct uart_hsu_port *up =
-		container_of(port, struct uart_hsu_port, port);
-
-	if (up->use_dma) {
-		hsu_dma_tx(up);
-	} else if (!(up->ier & UART_IER_THRI)) {
-		up->ier |= UART_IER_THRI;
-		serial_out(up, UART_IER, up->ier);
-	}
-}
-
-static void serial_hsu_stop_tx(struct uart_port *port)
-{
-	struct uart_hsu_port *up =
-		container_of(port, struct uart_hsu_port, port);
-	struct hsu_dma_chan *txc = up->txc;
-
-	if (up->use_dma)
-		chan_writel(txc, HSU_CH_CR, 0x0);
-	else if (up->ier & UART_IER_THRI) {
-		up->ier &= ~UART_IER_THRI;
-		serial_out(up, UART_IER, up->ier);
-	}
-}
-
-/* This is always called in spinlock protected mode, so
- * modify timeout timer is safe here */
-static void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts,
-			unsigned long *flags)
-{
-	struct hsu_dma_buffer *dbuf = &up->rxbuf;
-	struct hsu_dma_chan *chan = up->rxc;
-	struct uart_port *port = &up->port;
-	struct tty_port *tport = &port->state->port;
-	int count;
-
-	/*
-	 * First need to know how many is already transferred,
-	 * then check if its a timeout DMA irq, and return
-	 * the trail bytes out, push them up and reenable the
-	 * channel
-	 */
-
-	/* Timeout IRQ, need wait some time, see Errata 2 */
-	if (int_sts & 0xf00)
-		udelay(2);
-
-	/* Stop the channel */
-	chan_writel(chan, HSU_CH_CR, 0x0);
-
-	count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
-	if (!count) {
-		/* Restart the channel before we leave */
-		chan_writel(chan, HSU_CH_CR, 0x3);
-		return;
-	}
-
-	dma_sync_single_for_cpu(port->dev, dbuf->dma_addr,
-			dbuf->dma_size, DMA_FROM_DEVICE);
-
-	/*
-	 * Head will only wrap around when we recycle
-	 * the DMA buffer, and when that happens, we
-	 * explicitly set tail to 0. So head will
-	 * always be greater than tail.
-	 */
-	tty_insert_flip_string(tport, dbuf->buf, count);
-	port->icount.rx += count;
-
-	dma_sync_single_for_device(up->port.dev, dbuf->dma_addr,
-			dbuf->dma_size, DMA_FROM_DEVICE);
-
-	/* Reprogram the channel */
-	chan_writel(chan, HSU_CH_D0SAR, dbuf->dma_addr);
-	chan_writel(chan, HSU_CH_D0TSR, dbuf->dma_size);
-	chan_writel(chan, HSU_CH_DCR, 0x1
-					 | (0x1 << 8)
-					 | (0x1 << 16)
-					 | (0x1 << 24)	/* timeout bit, see HSU Errata 1 */
-					 );
-	spin_unlock_irqrestore(&up->port.lock, *flags);
-	tty_flip_buffer_push(tport);
-	spin_lock_irqsave(&up->port.lock, *flags);
-
-	chan_writel(chan, HSU_CH_CR, 0x3);
-
-}
-
-static void serial_hsu_stop_rx(struct uart_port *port)
-{
-	struct uart_hsu_port *up =
-		container_of(port, struct uart_hsu_port, port);
-	struct hsu_dma_chan *chan = up->rxc;
-
-	if (up->use_dma)
-		chan_writel(chan, HSU_CH_CR, 0x2);
-	else {
-		up->ier &= ~UART_IER_RLSI;
-		up->port.read_status_mask &= ~UART_LSR_DR;
-		serial_out(up, UART_IER, up->ier);
-	}
-}
-
-static inline void receive_chars(struct uart_hsu_port *up, int *status,
-		unsigned long *flags)
-{
-	unsigned int ch, flag;
-	unsigned int max_count = 256;
-
-	do {
-		ch = serial_in(up, UART_RX);
-		flag = TTY_NORMAL;
-		up->port.icount.rx++;
-
-		if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
-				       UART_LSR_FE | UART_LSR_OE))) {
-
-			dev_warn(up->dev, "We really rush into ERR/BI case"
-				"status = 0x%02x", *status);
-			/* For statistics only */
-			if (*status & UART_LSR_BI) {
-				*status &= ~(UART_LSR_FE | UART_LSR_PE);
-				up->port.icount.brk++;
-				/*
-				 * We do the SysRQ and SAK checking
-				 * here because otherwise the break
-				 * may get masked by ignore_status_mask
-				 * or read_status_mask.
-				 */
-				if (uart_handle_break(&up->port))
-					goto ignore_char;
-			} else if (*status & UART_LSR_PE)
-				up->port.icount.parity++;
-			else if (*status & UART_LSR_FE)
-				up->port.icount.frame++;
-			if (*status & UART_LSR_OE)
-				up->port.icount.overrun++;
-
-			/* Mask off conditions which should be ignored. */
-			*status &= up->port.read_status_mask;
-
-#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE
-			if (up->port.cons &&
-				up->port.cons->index == up->port.line) {
-				/* Recover the break flag from console xmit */
-				*status |= up->lsr_break_flag;
-				up->lsr_break_flag = 0;
-			}
-#endif
-			if (*status & UART_LSR_BI) {
-				flag = TTY_BREAK;
-			} else if (*status & UART_LSR_PE)
-				flag = TTY_PARITY;
-			else if (*status & UART_LSR_FE)
-				flag = TTY_FRAME;
-		}
-
-		if (uart_handle_sysrq_char(&up->port, ch))
-			goto ignore_char;
-
-		uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
-	ignore_char:
-		*status = serial_in(up, UART_LSR);
-	} while ((*status & UART_LSR_DR) && max_count--);
-
-	spin_unlock_irqrestore(&up->port.lock, *flags);
-	tty_flip_buffer_push(&up->port.state->port);
-	spin_lock_irqsave(&up->port.lock, *flags);
-}
-
-static void transmit_chars(struct uart_hsu_port *up)
-{
-	struct circ_buf *xmit = &up->port.state->xmit;
-	int count;
-
-	if (up->port.x_char) {
-		serial_out(up, UART_TX, up->port.x_char);
-		up->port.icount.tx++;
-		up->port.x_char = 0;
-		return;
-	}
-	if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
-		serial_hsu_stop_tx(&up->port);
-		return;
-	}
-
-	/* The IRQ is for TX FIFO half-empty */
-	count = up->port.fifosize / 2;
-
-	do {
-		serial_out(up, UART_TX, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-
-		up->port.icount.tx++;
-		if (uart_circ_empty(xmit))
-			break;
-	} while (--count > 0);
-
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(&up->port);
-
-	if (uart_circ_empty(xmit))
-		serial_hsu_stop_tx(&up->port);
-}
-
-static inline void check_modem_status(struct uart_hsu_port *up)
-{
-	int status;
-
-	status = serial_in(up, UART_MSR);
-
-	if ((status & UART_MSR_ANY_DELTA) == 0)
-		return;
-
-	if (status & UART_MSR_TERI)
-		up->port.icount.rng++;
-	if (status & UART_MSR_DDSR)
-		up->port.icount.dsr++;
-	/* We may only get DDCD when HW init and reset */
-	if (status & UART_MSR_DDCD)
-		uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
-	/* Will start/stop_tx accordingly */
-	if (status & UART_MSR_DCTS)
-		uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
-
-	wake_up_interruptible(&up->port.state->port.delta_msr_wait);
-}
-
-/*
- * This handles the interrupt from one port.
- */
-static irqreturn_t port_irq(int irq, void *dev_id)
-{
-	struct uart_hsu_port *up = dev_id;
-	unsigned int iir, lsr;
-	unsigned long flags;
-
-	if (unlikely(!up->running))
-		return IRQ_NONE;
-
-	spin_lock_irqsave(&up->port.lock, flags);
-	if (up->use_dma) {
-		lsr = serial_in(up, UART_LSR);
-		if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE |
-				       UART_LSR_FE | UART_LSR_OE)))
-			dev_warn(up->dev,
-				"Got lsr irq while using DMA, lsr = 0x%2x\n",
-				lsr);
-		check_modem_status(up);
-		spin_unlock_irqrestore(&up->port.lock, flags);
-		return IRQ_HANDLED;
-	}
-
-	iir = serial_in(up, UART_IIR);
-	if (iir & UART_IIR_NO_INT) {
-		spin_unlock_irqrestore(&up->port.lock, flags);
-		return IRQ_NONE;
-	}
-
-	lsr = serial_in(up, UART_LSR);
-	if (lsr & UART_LSR_DR)
-		receive_chars(up, &lsr, &flags);
-	check_modem_status(up);
-
-	/* lsr will be renewed during the receive_chars */
-	if (lsr & UART_LSR_THRE)
-		transmit_chars(up);
-
-	spin_unlock_irqrestore(&up->port.lock, flags);
-	return IRQ_HANDLED;
-}
-
-static inline void dma_chan_irq(struct hsu_dma_chan *chan)
-{
-	struct uart_hsu_port *up = chan->uport;
-	unsigned long flags;
-	u32 int_sts;
-
-	spin_lock_irqsave(&up->port.lock, flags);
-
-	if (!up->use_dma || !up->running)
-		goto exit;
-
-	/*
-	 * No matter what situation, need read clear the IRQ status
-	 * There is a bug, see Errata 5, HSD 2900918
-	 */
-	int_sts = chan_readl(chan, HSU_CH_SR);
-
-	/* Rx channel */
-	if (chan->dirt == DMA_FROM_DEVICE)
-		hsu_dma_rx(up, int_sts, &flags);
-
-	/* Tx channel */
-	if (chan->dirt == DMA_TO_DEVICE) {
-		chan_writel(chan, HSU_CH_CR, 0x0);
-		up->dma_tx_on = 0;
-		hsu_dma_tx(up);
-	}
-
-exit:
-	spin_unlock_irqrestore(&up->port.lock, flags);
-	return;
-}
-
-static irqreturn_t dma_irq(int irq, void *dev_id)
-{
-	struct hsu_port *hsu = dev_id;
-	u32 int_sts, i;
-
-	int_sts = mfd_readl(hsu, HSU_GBL_DMAISR);
-
-	/* Currently we only have 6 channels may be used */
-	for (i = 0; i < 6; i++) {
-		if (int_sts & 0x1)
-			dma_chan_irq(&hsu->chans[i]);
-		int_sts >>= 1;
-	}
-
-	return IRQ_HANDLED;
-}
-
-static unsigned int serial_hsu_tx_empty(struct uart_port *port)
-{
-	struct uart_hsu_port *up =
-		container_of(port, struct uart_hsu_port, port);
-	unsigned long flags;
-	unsigned int ret;
-
-	spin_lock_irqsave(&up->port.lock, flags);
-	ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
-	spin_unlock_irqrestore(&up->port.lock, flags);
-
-	return ret;
-}
-
-static unsigned int serial_hsu_get_mctrl(struct uart_port *port)
-{
-	struct uart_hsu_port *up =
-		container_of(port, struct uart_hsu_port, port);
-	unsigned char status;
-	unsigned int ret;
-
-	status = serial_in(up, UART_MSR);
-
-	ret = 0;
-	if (status & UART_MSR_DCD)
-		ret |= TIOCM_CAR;
-	if (status & UART_MSR_RI)
-		ret |= TIOCM_RNG;
-	if (status & UART_MSR_DSR)
-		ret |= TIOCM_DSR;
-	if (status & UART_MSR_CTS)
-		ret |= TIOCM_CTS;
-	return ret;
-}
-
-static void serial_hsu_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-	struct uart_hsu_port *up =
-		container_of(port, struct uart_hsu_port, port);
-	unsigned char mcr = 0;
-
-	if (mctrl & TIOCM_RTS)
-		mcr |= UART_MCR_RTS;
-	if (mctrl & TIOCM_DTR)
-		mcr |= UART_MCR_DTR;
-	if (mctrl & TIOCM_OUT1)
-		mcr |= UART_MCR_OUT1;
-	if (mctrl & TIOCM_OUT2)
-		mcr |= UART_MCR_OUT2;
-	if (mctrl & TIOCM_LOOP)
-		mcr |= UART_MCR_LOOP;
-
-	mcr |= up->mcr;
-
-	serial_out(up, UART_MCR, mcr);
-}
-
-static void serial_hsu_break_ctl(struct uart_port *port, int break_state)
-{
-	struct uart_hsu_port *up =
-		container_of(port, struct uart_hsu_port, port);
-	unsigned long flags;
-
-	spin_lock_irqsave(&up->port.lock, flags);
-	if (break_state == -1)
-		up->lcr |= UART_LCR_SBC;
-	else
-		up->lcr &= ~UART_LCR_SBC;
-	serial_out(up, UART_LCR, up->lcr);
-	spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-/*
- * What special to do:
- * 1. chose the 64B fifo mode
- * 2. start dma or pio depends on configuration
- * 3. we only allocate dma memory when needed
- */
-static int serial_hsu_startup(struct uart_port *port)
-{
-	struct uart_hsu_port *up =
-		container_of(port, struct uart_hsu_port, port);
-	unsigned long flags;
-
-	pm_runtime_get_sync(up->dev);
-
-	/*
-	 * Clear the FIFO buffers and disable them.
-	 * (they will be reenabled in set_termios())
-	 */
-	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
-	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
-			UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
-	serial_out(up, UART_FCR, 0);
-
-	/* Clear the interrupt registers. */
-	(void) serial_in(up, UART_LSR);
-	(void) serial_in(up, UART_RX);
-	(void) serial_in(up, UART_IIR);
-	(void) serial_in(up, UART_MSR);
-
-	/* Now, initialize the UART, default is 8n1 */
-	serial_out(up, UART_LCR, UART_LCR_WLEN8);
-
-	spin_lock_irqsave(&up->port.lock, flags);
-
-	up->port.mctrl |= TIOCM_OUT2;
-	serial_hsu_set_mctrl(&up->port, up->port.mctrl);
-
-	/*
-	 * Finally, enable interrupts.  Note: Modem status interrupts
-	 * are set via set_termios(), which will be occurring imminently
-	 * anyway, so we don't enable them here.
-	 */
-	if (!up->use_dma)
-		up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE;
-	else
-		up->ier = 0;
-	serial_out(up, UART_IER, up->ier);
-
-	spin_unlock_irqrestore(&up->port.lock, flags);
-
-	/* DMA init */
-	if (up->use_dma) {
-		struct hsu_dma_buffer *dbuf;
-		struct circ_buf *xmit = &port->state->xmit;
-
-		up->dma_tx_on = 0;
-
-		/* First allocate the RX buffer */
-		dbuf = &up->rxbuf;
-		dbuf->buf = kzalloc(HSU_DMA_BUF_SIZE, GFP_KERNEL);
-		if (!dbuf->buf) {
-			up->use_dma = 0;
-			goto exit;
-		}
-		dbuf->dma_addr = dma_map_single(port->dev,
-						dbuf->buf,
-						HSU_DMA_BUF_SIZE,
-						DMA_FROM_DEVICE);
-		dbuf->dma_size = HSU_DMA_BUF_SIZE;
-
-		/* Start the RX channel right now */
-		hsu_dma_start_rx_chan(up->rxc, dbuf);
-
-		/* Next init the TX DMA */
-		dbuf = &up->txbuf;
-		dbuf->buf = xmit->buf;
-		dbuf->dma_addr = dma_map_single(port->dev,
-					       dbuf->buf,
-					       UART_XMIT_SIZE,
-					       DMA_TO_DEVICE);
-		dbuf->dma_size = UART_XMIT_SIZE;
-
-		/* This should not be changed all around */
-		chan_writel(up->txc, HSU_CH_BSR, 32);
-		chan_writel(up->txc, HSU_CH_MOTSR, 4);
-		dbuf->ofs = 0;
-	}
-
-exit:
-	 /* And clear the interrupt registers again for luck. */
-	(void) serial_in(up, UART_LSR);
-	(void) serial_in(up, UART_RX);
-	(void) serial_in(up, UART_IIR);
-	(void) serial_in(up, UART_MSR);
-
-	up->running = 1;
-	return 0;
-}
-
-static void serial_hsu_shutdown(struct uart_port *port)
-{
-	struct uart_hsu_port *up =
-		container_of(port, struct uart_hsu_port, port);
-	unsigned long flags;
-
-	/* Disable interrupts from this port */
-	up->ier = 0;
-	serial_out(up, UAR