Merge tag 'regulator-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This is a fairly small release for the regulator API, there's quite a
  few new devices supported and some important improvements around
  coupled regulators in the core but mostly just small fixes and
  improvements otherwise.

  Summary:

   - Fixes and cleanups around the handling of coupled regulators.

   - A special driver for some Raspberry Pi panels with some unusually
     custom stuff around them.

   - Support for Qualcomm PM660/PM660L, PM8950 and PM8953, Richtek
     RT4801 and RTMV20, Rohm BD9576MUF and BD9573MUF"

* tag 'regulator-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (89 commits)
  regulator: bd9576: Fix print
  regulator: bd9576: fix regulator binfdings dt node names
  dt-bindings: regulator: document pm8950 and pm8953 smd regulators
  regulator: qcom_smd: add pm8953 regulators
  regulator: Make constraint debug processing conditional on DEBUG
  regulator: qcom: labibb: Constify static structs
  regulator: dt-bindings: Document the PM660/PM660L PMICs entries
  regulator: qcom_smd: Add PM660/PM660L regulator support
  regulator: dt-bindings: Document the PM660/660L SPMI PMIC entries
  regulator: qcom_spmi: Add PM660/PM660L regulators
  regulator: qcom_spmi: Add support for new regulator types
  regulator: core: Enlarge max OF property name length to 64 chars
  regulator: tps65910: use regmap accessors
  regulator: rtmv20: Add missing regcache cache only before marked as dirty
  regulator: rtmv20: Update DT binding document and property name parsing
  regulator: rtmv20: Add DT-binding document for Richtek RTMV20
  regulator: rtmv20: Adds support for Richtek RTMV20 load switch regulator
  regulator: resolve supply after creating regulator
  regulator: print symbolic errors in kernel messages
  regulator: print state at boot
  ...

77 files changed, 3498 insertions, 1033 deletions

diff --git a/Documentation/devicetree/bindings/regulator/mp886x.txt b/Documentation/devicetree/bindings/regulator/mp886x.txt
deleted file mode 100644
index 551867829459..000000000000
--- a/Documentation/devicetree/bindings/regulator/mp886x.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Monolithic Power Systems MP8867/MP8869 voltage regulator
-
-Required properties:
-- compatible: Must be one of the following.
-	"mps,mp8867"
-	"mps,mp8869"
-- reg: I2C slave address.
-- enable-gpios: enable gpios.
-- mps,fb-voltage-divider: An array of two integers containing the resistor
-  values R1 and R2 of the feedback voltage divider in kilo ohms.
-
-Any property defined as part of the core regulator binding, defined in
-./regulator.txt, can also be used.
-
-Example:
-
-	vcpu: regulator@62 {
-		compatible = "mps,mp8869";
-		regulator-name = "vcpu";
-		regulator-min-microvolt = <700000>;
-		regulator-max-microvolt = <850000>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>;
-		mps,fb-voltage-divider = <80 240>;
-		reg = <0x62>;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
new file mode 100644
index 000000000000..ba175b30f468
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mps,mp886x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power Systems MP8867/MP8869 voltage regulator
+
+maintainers:
+  - Jisheng Zhang <jszhang@kernel.org>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mps,mp8867
+      - mps,mp8869
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO to enable/disable the regulator.
+    maxItems: 1
+
+  mps,fb-voltage-divider:
+    description: An array of two integers containing the resistor
+      values R1 and R2 of the feedback voltage divider in kilo ohms.
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    maxItems: 2
+
+  mps,switch-frequency-hz:
+    description: The valid switch frequency in Hertz.
+    enum: [500000, 750000, 1000000, 1250000, 1500000]
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - mps,fb-voltage-divider
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        regulator@62 {
+          compatible = "mps,mp8869";
+          regulator-name = "vcpu";
+          regulator-min-microvolt = <800000>;
+          regulator-max-microvolt = <1150000>;
+          enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>;
+          mps,fb-voltage-divider = <80 240>;
+          reg = <0x62>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
new file mode 100644
index 000000000000..a462d99a25cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mt6360-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6360 Regulator from MediaTek Integrated
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  list of regulators provided by this controller, must be named
+  after their hardware counterparts buck1/2 or ldo1/2/3/5/6/7
+
+properties:
+  compatible:
+    const: mediatek,mt6360-regulator
+
+  LDO_VIN1-supply:
+    description: Input supply phandle(s) for LDO1/2/3
+  LDO_VIN2-supply:
+    description: Input supply phandle(s) for LDO5
+  LDO_VIN3-supply:
+    description: Input supply phandle(s) for LDO6/7
+
+patternProperties:
+  "^buck[12]$":
+    $ref: "regulator.yaml#"
+
+  "^ldo[123567]$":
+    $ref: "regulator.yaml#"
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+    regulator {
+      compatible = "mediatek,mt6360-regulator";
+      LDO_VIN3-supply = <&BUCK2>;
+      buck1 {
+        regulator-compatible = "BUCK1";
+        regulator-name = "mt6360,buck1";
+        regulator-min-microvolt = <300000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP
+             MT6360_OPMODE_ULP>;
+      };
+      BUCK2: buck2 {
+        regulator-compatible = "BUCK2";
+        regulator-name = "mt6360,buck2";
+        regulator-min-microvolt = <300000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP
+             MT6360_OPMODE_ULP>;
+      };
+      ldo6 {
+        regulator-compatible = "LDO6";
+        regulator-name = "mt6360,ldo6";
+        regulator-min-microvolt = <500000>;
+        regulator-max-microvolt = <2100000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo7 {
+        regulator-compatible = "LDO7";
+        regulator-name = "mt6360,ldo7";
+        regulator-min-microvolt = <500000>;
+        regulator-max-microvolt = <2100000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo1 {
+        regulator-compatible = "LDO1";
+        regulator-name = "mt6360,ldo1";
+        regulator-min-microvolt = <1200000>;
+        regulator-max-microvolt = <3600000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+        ldo2 {
+        regulator-compatible = "LDO2";
+        regulator-name = "mt6360,ldo2";
+        regulator-min-microvolt = <1200000>;
+        regulator-max-microvolt = <3600000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo3 {
+        regulator-compatible = "LDO3";
+        regulator-name = "mt6360,ldo3";
+        regulator-min-microvolt = <1200000>;
+        regulator-max-microvolt = <3600000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo5 {
+        regulator-compatible = "LDO5";
+        regulator-name = "mt6360,ldo5";
+        regulator-min-microvolt = <2700000>;
+        regulator-max-microvolt = <3600000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
deleted file mode 100644
index 4d3b12b92cb3..000000000000
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ /dev/null
@@ -1,394 +0,0 @@
-PFUZE100 family of regulators
-
-Required properties:
-- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000", "fsl,pfuze3001"
-- reg: I2C slave address
-
-Optional properties:
-- fsl,pfuze-support-disable-sw: Boolean, if present disable all unused switch
-  regulators to save power consumption. Attention, ensure that all important
-  regulators (e.g. DDR ref, DDR supply) has set the "regulator-always-on"
-  property. If not present, the switched regulators are always on and can't be
-  disabled. This binding is a workaround to keep backward compatibility with
-  old dtb's which rely on the fact that the switched regulators are always on
-  and don't mark them explicit as "regulator-always-on".
-- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all
-  power rails when PMIC_STBY_REQ line is asserted during the power off sequence.
-  Use this option if the SoC should be powered off by external power
-  management IC (PMIC) on PMIC_STBY_REQ signal.
-  As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal.
-
-Required child node:
-- regulators: This is the list of child nodes that specify the regulator
-  initialization data for defined regulators. Please refer to below doc
-  Documentation/devicetree/bindings/regulator/regulator.txt.
-
-  The valid names for regulators are:
-  --PFUZE100
-  sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
-  --PFUZE200
-  sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin
-  --PFUZE3000
-  sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4
-  --PFUZE3001
-  sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4
-
-Each regulator is defined using the standard binding for regulators.
-
-Example 1: PFUZE100
-
-	pfuze100: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-
-Example 2: PFUZE200
-
-	pfuze200: pmic@8 {
-		compatible = "fsl,pfuze200";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			coin_reg: coin {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-Example 3: PFUZE3000
-
-	pfuze3000: pmic@8 {
-		compatible = "fsl,pfuze3000";