dt-bindings:iio:pressure:hoperf,hp03 yaml conversion

One quirk in the txt file was that the xclr gpio was specified as
xclr-gpio rather than xclr-gpios. I've fixed that in the
yaml version.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20201031134110.724233-9-jic23@kernel.org

2 files changed, 47 insertions, 17 deletions

diff --git a/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml
new file mode 100644
index 000000000000..69a3759e23db
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/hoperf,hp03.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HopeRF HP03 digital pressure/temperature sensors
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  Digital pressure and temperature sensor with an I2C interface.
+
+properties:
+  compatible:
+    const: hoperf,hp03
+
+  reg:
+    maxItems: 1
+
+  xclr-gpios:
+    description:
+      The XCLR pin is a reset of the ADC in the chip, it must be pulled
+      HI before the conversion and readout of the value from the ADC
+      registers and pulled LO afterward.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@77 {
+            compatible = "hoperf,hp03";
+            reg = <0x77>;
+            xclr-gpios = <&portc 0 0x0>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/pressure/hp03.txt b/Documentation/devicetree/bindings/iio/pressure/hp03.txt
deleted file mode 100644
index 831dbee7a5c3..000000000000
--- a/Documentation/devicetree/bindings/iio/pressure/hp03.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-HopeRF HP03 digital pressure/temperature sensors
-
-Required properties:
-- compatible: must be "hoperf,hp03"
-- xclr-gpio: must be device tree identifier of the XCLR pin.
-             The XCLR pin is a reset of the ADC in the chip,
-             it must be pulled HI before the conversion and
-             readout of the value from the ADC registers and
-             pulled LO afterward.
-
-Example:
-
-hp03@77 {
-	compatible = "hoperf,hp03";
-	reg = <0x77>;
-	xclr-gpio = <&portc 0 0x0>;
-};