diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-08-12 12:19:49 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-08-12 12:19:49 -0700 |
commit | 05a5b5d8a2cd82e2bf5a01ad064efa396ec7fbef (patch) | |
tree | c746faccc9738de193960260ae79f5acbd033198 | |
parent | 4586039427fab2b8c4edd49c73002e13e04315cf (diff) | |
parent | dd9c697a944a02066877404b01e9fb7dcb3a2218 (diff) |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"Here's some more updates that missed the last pull request because I
happened to tag the tree at an earlier point in the history of
clk-next. I must have fat fingered it and checked out an older version
of clk-next on this second computer I'm using.
This time it actually includes more code for Qualcomm SoCs, the AT91
major updates, and some Rockchip SoC clk driver updates as well. I've
corrected this flow so this shouldn't happen again"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (83 commits)
clk: bcm2835: Do not use prediv with bcm2711's PLLs
clk: drop unused function __clk_get_flags
clk: hsdk: Fix bad dependency on IOMEM
dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180
clk: mmp: avoid missing prototype warning
clk: sparx5: Add Sparx5 SoC DPLL clock driver
dt-bindings: clock: sparx5: Add bindings include file
clk: qoriq: add LS1021A core pll mux options
clk: clk-atlas6: fix return value check in atlas6_clk_init()
clk: tegra: pll: Improve PLLM enable-state detection
clk: X1000: Add support for calculat REFCLK of USB PHY.
clk: JZ4780: Reformat the code to align it.
clk: JZ4780: Add functions for enable and disable USB PHY.
clk: Ingenic: Add RTC related clocks for Ingenic SoCs.
dt-bindings: clock: Add tabs to align code.
dt-bindings: clock: Add RTC related clocks for Ingenic SoCs.
clk: davinci: Use fallthrough pseudo-keyword
clk: imx: Use fallthrough pseudo-keyword
clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk
clk: qcom: gcc-sdm660: Add missing modem reset
...
82 files changed, 4778 insertions, 871 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml index b48ed875eb8e..17e4f20c8d39 100644 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -10,6 +10,15 @@ maintainers: - Eric Anholt <eric@anholt.net> - Stefan Wahren <wahrenst@gmx.net> +select: + properties: + compatible: + contains: + const: raspberrypi,bcm2835-firmware + + required: + - compatible + properties: compatible: items: diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt deleted file mode 100644 index 6165b6ddb1a9..000000000000 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt +++ /dev/null @@ -1,125 +0,0 @@ -Binding for IDT VersaClock 5,6 programmable i2c clock generators. - -The IDT VersaClock 5 and VersaClock 6 are programmable i2c clock -generators providing from 3 to 12 output clocks. - -==I2C device node== - -Required properties: -- compatible: shall be one of - "idt,5p49v5923" - "idt,5p49v5925" - "idt,5p49v5933" - "idt,5p49v5935" - "idt,5p49v6901" - "idt,5p49v6965" -- reg: i2c device address, shall be 0x68 or 0x6a. -- #clock-cells: from common clock binding; shall be set to 1. -- clocks: from common clock binding; list of parent clock handles, - - 5p49v5923 and - 5p49v5925 and - 5p49v6901: (required) either or both of XTAL or CLKIN - reference clock. - - 5p49v5933 and - - 5p49v5935: (optional) property not present (internal - Xtal used) or CLKIN reference - clock. -- clock-names: from common clock binding; clock input names, can be - - 5p49v5923 and - 5p49v5925 and - 5p49v6901: (required) either or both of "xin", "clkin". - - 5p49v5933 and - - 5p49v5935: (optional) property not present or "clkin". - -For all output ports, a corresponding, optional child node named OUT1, -OUT2, etc. can represent a each output, and the node can be used to -specify the following: - -- itd,mode: can be one of the following: - - VC5_LVPECL - - VC5_CMOS - - VC5_HCSL33 - - VC5_LVDS - - VC5_CMOS2 - - VC5_CMOSD - - VC5_HCSL25 - -- idt,voltage-microvolts: can be one of the following - - 1800000 - - 2500000 - - 3300000 -- idt,slew-percent: Percent of normal, can be one of - - 80 - - 85 - - 90 - - 100 - -==Mapping between clock specifier and physical pins== - -When referencing the provided clock in the DT using phandle and -clock specifier, the following mapping applies: - -5P49V5923: - 0 -- OUT0_SEL_I2CB - 1 -- OUT1 - 2 -- OUT2 - -5P49V5933: - 0 -- OUT0_SEL_I2CB - 1 -- OUT1 - 2 -- OUT4 - -5P49V5925 and -5P49V5935: - 0 -- OUT0_SEL_I2CB - 1 -- OUT1 - 2 -- OUT2 - 3 -- OUT3 - 4 -- OUT4 - -5P49V6901: - 0 -- OUT0_SEL_I2CB - 1 -- OUT1 - 2 -- OUT2 - 3 -- OUT3 - 4 -- OUT4 - -==Example== - -/* 25MHz reference crystal */ -ref25: ref25m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; -}; - -i2c-master-node { - - /* IDT 5P49V5923 i2c clock generator */ - vc5: clock-generator@6a { - compatible = "idt,5p49v5923"; - reg = <0x6a>; - #clock-cells = <1>; - - /* Connect XIN input to 25MHz reference */ - clocks = <&ref25m>; - clock-names = "xin"; - - OUT1 { - itd,mode = <VC5_CMOS>; - idt,voltage-microvolts = <1800000>; - idt,slew-percent = <80>; - }; - OUT2 { - ... - }; - ... - }; -}; - -/* Consumer referencing the 5P49V5923 pin OUT1 */ -consumer { - ... - clocks = <&vc5 1>; - ... -} diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml new file mode 100644 index 000000000000..3d4e1685cc55 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/idt,versaclock5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for IDT VersaClock 5 and 6 programmable I2C clock generators + +description: | + The IDT VersaClock 5 and VersaClock 6 are programmable I2C + clock generators providing from 3 to 12 output clocks. + + When referencing the provided clock in the DT using phandle and clock + specifier, the following mapping applies: + + - 5P49V5923: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT2 + + - 5P49V5933: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT4 + + - other parts: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT2 + 3 -- OUT3 + 4 -- OUT4 + +maintainers: + - Luca Ceresoli <luca@lucaceresoli.net> + +properties: + compatible: + enum: + - idt,5p49v5923 + - idt,5p49v5925 + - idt,5p49v5933 + - idt,5p49v5935 + - idt,5p49v6901 + - idt,5p49v6965 + + reg: + description: I2C device address + enum: [ 0x68, 0x6a ] + + '#clock-cells': + const: 1 + +patternProperties: + "^OUT[1-4]$": + type: object + description: + Description of one of the outputs (OUT1..OUT4). See "Clock1 Output + Configuration" in the Versaclock 5/6/6E Family Register Description + and Programming Guide. + properties: + idt,mode: + description: + The output drive mode. Values defined in dt-bindings/clk/versaclock.h + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 6 + idt,voltage-microvolt: + description: The output drive voltage. + enum: [ 1800000, 2500000, 3300000 ] + idt,slew-percent: + description: The Slew rate control for CMOS single-ended. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 80, 85, 90, 100 ] + +required: + - compatible + - reg + - '#clock-cells' + +allOf: + - if: + properties: + compatible: + enum: + - idt,5p49v5933 + - idt,5p49v5935 + then: + # Devices with builtin crystal + optional external input + properties: + clock-names: + const: clkin + clocks: + maxItems: 1 + else: + # Devices without builtin crystal + properties: + clock-names: + minItems: 1 + maxItems: 2 + items: + enum: [ xin, clkin ] + clocks: + minItems: 1 + maxItems: 2 + required: + - clock-names + - clocks + +examples: + - | + #include <dt-bindings/clk/versaclock.h> + + /* 25MHz reference crystal */ + ref25: ref25m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + /* IDT 5P49V5923 I2C clock generator */ + vc5: clock-generator@6a { + compatible = "idt,5p49v5923"; + reg = <0x6a>; + #clock-cells = <1>; + + /* Connect XIN input to 25MHz reference */ + clocks = <&ref25m>; + clock-names = "xin"; + + OUT1 { + idt,drive-mode = <VC5_CMOSD>; + idt,voltage-microvolts = <1800000>; + idt,slew-percent = <80>; + }; + + OUT4 { + idt,drive-mode = <VC5_LVDS>; + }; + }; + }; + + /* Consumer referencing the 5P49V5923 pin OUT1 */ + consumer { + /* ... */ + clocks = <&vc5 1>; + /* ... */ + }; + +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml index 8a0c576ba8b3..df943c4c3234 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml @@ -1,23 +1,31 @@ # SPDX-License-Identifier: GPL-2.0-only %YAML 1.2 --- -$id: http://devicetree.org/schemas/clock/qcom,sdm845-gpucc.yaml# +$id: http://devicetree.org/schemas/clock/qcom,gpucc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Graphics Clock & Reset Controller Binding for SDM845 +title: Qualcomm Graphics Clock & Reset Controller Binding maintainers: - Taniya Das <tdas@codeaurora.org> description: | Qualcomm graphics clock control module which supports the clocks, resets and - power domains on SDM845. + power domains on SDM845/SC7180/SM8150/SM8250. - See also dt-bindings/clock/qcom,gpucc-sdm845.h. + See also: + dt-bindings/clock/qcom,gpucc-sdm845.h + dt-bindings/clock/qcom,gpucc-sc7180.h + dt-bindings/clock/qcom,gpucc-sm8150.h + dt-bindings/clock/qcom,gpucc-sm8250.h properties: compatible: - const: qcom,sdm845-gpucc + enum: + - qcom,sdm845-gpucc + - qcom,sc7180-gpucc + - qcom,sm8150-gpucc + - qcom,sm8250-gpucc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml index d673edeed98d..a20cb10636dd 100644 --- a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only %YAML 1.2 --- -$id: http://devicetree.org/schemas/clock/qcom,kryocc.yaml# +$id: http://devicetree.org/schemas/clock/qcom,msm8996-apcc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm clock controller for MSM8996 CPUs @@ -46,11 +46,9 @@ required: additionalProperties: false examples: - # Example for msm8996 - | kryocc: clock-controller@6400000 { compatible = "qcom,msm8996-apcc"; reg = <0x6400000 0x90000>; #clock-cells = <1>; - }; -... + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml deleted file mode 100644 index fe08461fce05..000000000000 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml +++ /dev/null @@ -1,74 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/clock/qcom,sc7180-gpucc.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Graphics Clock & Reset Controller Binding for SC7180 - -maintainers: - - Taniya Das <tdas@codeaurora.org> - -description: | - Qualcomm graphics clock control module which supports the clocks, resets and - power domains on SC7180. - - See also dt-bindings/clock/qcom,gpucc-sc7180.h. - -properties: - compatible: - const: qcom,sc7180-gpucc - - clocks: - items: - - description: Board XO source - - description: GPLL0 main branch source - - description: GPLL0 div branch source - - clock-names: - items: - - const: bi_tcxo - - const: gcc_gpu_gpll0_clk_src - - const: gcc_gpu_gpll0_div_clk_src - - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - -required: - - compatible - - reg - - clocks - - clock-names - - '#clock-cells' - - '#reset-cells' - - '#power-domain-cells' - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,gcc-sc7180.h> - #include <dt-bindings/clock/qcom,rpmh.h> - clock-controller@5090000 { - compatible = "qcom,sc7180-gpucc"; - reg = <0x05090000 0x9000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_GPU_GPLL0_CLK_SRC>, - <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; - clock-names = "bi_tcxo", - "gcc_gpu_gpll0_clk_src", - "gcc_gpu_gpll0_div_clk_src"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells |