Go 1.16: embed and io/fs

1 files changed, 0 insertions, 183 deletions

diff --git a/translations/dicts/en_US.toml b/translations/dicts/en_US.toml
deleted file mode 100644
index bf1771b..0000000
--- a/translations/dicts/en_US.toml
+++ /dev/null
@@ -1,183 +0,0 @@
-configfile="Config file"
-usage="Usage: {0} [options]\n\nOptions:\n"
-total="Total"
-
-
-[help]
-paths="Loadable colorschemes & layouts, and the config file, are searched for, in order:"
-log="The log file is in {0}"
-written="Config written to {0}"
-help="""
-Quit: q or <C-c>
-
-Process navigation:
-  - k and <Up>: up
-  - j and <Down>: down
-  - <C-u>: half page up
-  - <C-d>: half page down
-  - <C-b>: full page up
-  - <C-f>: full page down
-  - gg and <Home>: jump to top
-  - G and <End>: jump to bottom
-
-Process actions:
-  - <Tab>: toggle process grouping
-  - dd: kill selected process or group of processes with SIGTERM (15)
-  - d3: kill selected process or group of processes with SIGQUIT (3)
-  - d9: kill selected process or group of processes with SIGKILL (9)
-
-Process sorting:
-  - c: CPU
-  - m: Mem
-  - p: PID
-
-Process filtering:
-  - /: start editing filter
-  - (while editing):
-    - <Enter>: accept filter
-    - <C-c> and <Escape>: clear filter
-
-CPU and Mem graph scaling:
-  - h: scale in
-  - l: scale out
-
-Network:
-  - b: toggle between mbps and scaled bytes per second
-"""
-# TRANSLATORS: Please don't translate the layout **names**
-layouts = """Built-in layouts:
-   default
-   minimal
-   battery
-   kitchensink"""
-# TRANSLATORS: Please don't translate the colorcheme **names**
-colorschemes = """Built-in colorschemes:
-   default
-   default-dark (for white background)
-   solarized
-   solarized16-dark
-   solarized16-light
-   monokai
-   vice
-   nord"""
-# TRANSLATORS: Please don't translate the widget **names**
-widgets = """Widgets that can be used in layouts:
-   cpu   - CPU load graph
-   mem   - Physical & swap memory use graph
-   temp  - Sensor temperatures
-   disk  - Physical disk partition use
-   power - A battery bar
-   net   - Network load
-   procs - Interactive process list"""
-
-
-[args]
-help="Show this screen."
-color="Set a colorscheme."
-scale="Graph scale factor, >0"
-version="Print version and exit."
-percpu="Show each CPU in the CPU widget."
-cpuavg="Show average CPU in the CPU widget."
-temp="Show temperatures in fahrenheit."
-statusbar="Show a statusbar with the time."
-rate="Refresh frequency. Most time units accepted.  \"1m\" = refresh every minute.  \"100ms\" = refresh every 100ms."
-layout="Name of layout spec file for the UI. Use \"-\" to pipe."
-net="Select network interface. Several interfaces can be defined using comma separated values. Interfaces can also be ignored using \"!\""
-export="Enable metrics for export on the specified port."
-mbps="Show network rate as mbps."
-test="Runs tests and exits with success/failure code."
-conffile="Config file to use instead of default (MUST BE FIRST ARGUMENT)"
-# TRANSLATORS: Please don't translate the **labels** ("devices", "layouts") as they don't change in the code.
-list="""
-List <devices|layouts|colorschemes|paths|keys|langs>
-   devices: Prints out device names for filterable widgets
-   layouts: Lists built-in layouts
-   colorschemes: Lists built-in colorschemes
-   paths: List out configuration file search paths
-   widgets: Widgets that can be used in a layout
-   keys: Show the keyboard bindings.
-   langs: Show supported language translations."""
-write="Write out a default config file."
-
-
-[config.err]
-configsyntax="0| bad config file syntax; should be KEY=VALUE, was {0}"
-deprecation="1| line {0}: '{1}' is deprecated.  Ignored {1}={2}"
-line="2| line #{0}: {1}"
-tempscale="3| invalid TempScale value {0}"
-
-
-[error]
-configparse="4| failed to parse config file: {0}"
-cliparse="5| parsing CLI args: {0}"
-logsetup="6| failed to setup log file: {0}"
-unknownopt="7| Unknown option \"{0}\"; try layouts, colorschemes, keys, paths, or devices\n"
-writefail="8| Failed to write configuration file: {0}"
-checklog="9| errors encountered; from {0}:"
-metricsetup="10| error setting up {0} metrics: {1}"
-nometrics="11| no metrics for {0} {1}"
-fatalfetch="12| fatal error fetching {0} info: {1}"
-recovfetch="13| recoverable error fetching {0} info; skipping {0}: {1}"
-nodevfound="14| no usable {0} found"
-setuperr="15| error setting up {0}: {1}"
-colorschemefile="16| failed to find colorscheme file {0} in {1}"
-colorschemeread="17| failed to read colorscheme file {0}: {1}"
-colorschemeparse="18| failed to parse colorscheme file: {0}"
-findlayout="19| failed to read colorscheme file {0}: {1}"
-logopen="20| failed to open log file {0}: {1}"
-table="21| table widget TopRow value less than 0. TopRow: {0}"
-nohostname="22| could not get hostname: {0}"
-
-[layout.error]
-widget="23| Invalid widget name {0}.  Must be one of {1}"
-format="24| Layout error on line {0}: format must be {1}. Error parsing {2} as a int. Word was {3}. Using a row height of 1."
-slashes="25| Layout warning on line {0}: too many '/' in word {1}; ignoring extra junk."
-
-[widget.label]
-disk=" Disk Usage "
-cpu=" CPU Usage "
-gauge=" Power Level "
-battery=" Battery Status "
-batt=" Battery "
-temp=" Temperatures "
-net=" Network Usage "
-netint=" Network Usage: {0} "
-mem=" Memory Usage "
-
-
-[widget.net.err]
-netactivity="26| failed to get network activity from gopsutil: {0}"
-negvalrecv="27| error: negative value for recently received network data from gopsutil. recentBytesRecv: {0}"
-negvalsent="28| error: negative value for recently sent network data from gopsutil. recentBytesSent: {0}"
-
-
-[widget.disk]
-disk="Disk"
-mount="Mount"
-used="Used"
-free="Free"
-rs="R/s"
-ws="W/s"
-
-
-[widget.proc]
-filter=" Filter: "
-label=" Processes "
-[widget.proc.header]
-count="Count"
-command="Command"
-cpu="CPU%"
-mem="Mem%"
-pid="PID"
-[widget.proc.err]
-count="29| failed to get CPU count from gopsutil: {0}"
-retrieve="30| failed to retrieve processes: {0}"
-ps="31| failed to execute 'ps' command: {0}"
-gopsutil="32| failed to get processes from gopsutil: {0}"
-pidconv="33| failed to convert PID to int: {0}. line: {1}"
-cpuconv="34| failed to convert CPU usage to float: {0}. line: {1}"
-memconv="35| failed to convert Mem usage to float: {0}. line: {1}"
-getcmd="36| failed to get process command from gopsutil: {0}. psProc: {1}. i: {2}. pid: {3}"
-cpupercent="37| failed to get process cpu usage from gopsutil: {0}. psProc: {1}. i: {2}. pid: {3}"
-mempercent="38| failed to get process memeory usage from gopsutil: {0}. psProc: {1}. i: {2}. pid: {3}"
-parse="39| failed to parse output: {0}"