Merge tag 'omap-gpmc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC/OMAP GPMC driver cleanup and move from Arnd Bergmann:
 "The GPMC driver has traditionally been considered a part of the OMAP
  platform code and tightly interweaved with some of the boards.

  With this cleanup, it has finally come to the point where it makes
  sense to move it out of arch/arm into drivers/memory, where we already
  have other drivers for similar hardware.  The cleanups are still
  ongoing, with the goal of eventually having a standalone driver that
  does not require an interface to architecture code.

  This is a separate branch because of dependencies on multiple other
  branches, and to keep the drivers changes separate from the normal
  cleanups"

* tag 'omap-gpmc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  memory: gpmc: Move omap gpmc code to live under drivers
  ARM: OMAP2+: Move GPMC initcall to devices.c
  ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
  ARM: OMAP2+: Remove unnecesary include in GPMC driver
  ARM: OMAP2+: Drop board file for 3430sdp
  ARM: OMAP2+: Drop board file for ti8168evm
  ARM: OMAP2+: Drop legacy code for gpmc-smc91x.c
  ARM: OMAP2+: Require proper GPMC timings for devices
  ARM: OMAP2+: Show bootloader GPMC timings to allow configuring the .dts file
  ARM: OMAP2+: Fix support for multiple devices on a GPMC chip select
  ARM: OMAP2+: gpmc: Sanity check GPMC fck on probe
  ARM: OMAP2+: gpmc: Keep Chip Select disabled while configuring it
  ARM: OMAP2+: gpmc: Always enable A26-A11 for non NAND devices
  ARM: OMAP2+: gpmc: Error out if timings fail in gpmc_probe_generic_child()
  ARM: OMAP2+: gpmc: Print error message in set_gpmc_timing_reg()

26 files changed, 553 insertions, 1355 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index e3a96e42193c..0d6469a2cf70 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6702,6 +6702,14 @@ L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	sound/soc/omap/
 
+OMAP GENERAL PURPOSE MEMORY CONTROLLER SUPPORT
+M:	Roger Quadros <rogerq@ti.com>
+M:	Tony Lindgren <tony@atomide.com>
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/memory/omap-gpmc.c
+F:	arch/arm/mach-omap2/*gpmc*
+
 OMAP FRAMEBUFFER SUPPORT
 M:	Tomi Valkeinen <tomi.valkeinen@ti.com>
 L:	linux-fbdev@vger.kernel.org
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index f4d06aea8460..6e249324fdd7 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -79,7 +79,9 @@ config ARCH_OMAP2PLUS
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
 	select MACH_OMAP_GENERIC
+	select MEMORY
 	select OMAP_DM_TIMER
+	select OMAP_GPMC
 	select PINCTRL
 	select SOC_BUS
 	select TI_PRIV_EDMA
@@ -235,12 +237,6 @@ config MACH_TOUCHBOOK
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_OMAP_3430SDP
-	bool "OMAP 3430 SDP board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_NOKIA_N810
        bool
 
@@ -282,16 +278,6 @@ config MACH_SBC3530
 	default y
 	select OMAP_PACKAGE_CUS
 
-config MACH_TI8168EVM
-	bool "TI8168 Evaluation Module"
-	depends on SOC_TI81XX
-	default y
-
-config MACH_TI8148EVM
-	bool "TI8148 Evaluation Module"
-	depends on SOC_TI81XX
-	default y
-
 config OMAP3_EMU
 	bool "OMAP3 debugging peripherals"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 3b653b3ac268..08cc94474d17 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -6,7 +6,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 	-I$(srctree)/arch/arm/plat-omap/include
 
 # Common support
-obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \
+obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
 	 omap_device.o sram.o drm.o
 
@@ -246,7 +246,6 @@ obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
 obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
-obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o sdram-nokia.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-peripherals.o
@@ -260,8 +259,6 @@ obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
 obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o
 
 obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o
-obj-$(CONFIG_MACH_TI8168EVM)		+= board-ti8168evm.o
-obj-$(CONFIG_MACH_TI8148EVM)		+= board-ti8168evm.o
 
 # Platform specific device init code
 
@@ -284,9 +281,6 @@ obj-y					+= $(onenand-m) $(onenand-y)
 nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o
 obj-y					+= $(nand-m) $(nand-y)
 
-smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
-obj-y					+= $(smc91x-m) $(smc91x-y)
-
 smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
 obj-y					+= $(smsc911x-m) $(smsc911x-y)
 ifneq ($(CONFIG_HWSPINLOCK_OMAP),)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
deleted file mode 100644
index d21a3048d06b..000000000000
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ /dev/null
@@ -1,632 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-3430sdp.c
- *
- * Copyright (C) 2007 Texas Instruments
- *
- * Modified from mach-omap2/board-generic.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/omap-twl4030.h>
-#include <linux/usb/phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include <linux/omap-dma.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "gpmc.h"
-#include "gpmc-smc91x.h"
-
-#include "soc.h"
-#include "board-flash.h"
-#include "mux.h"
-#include "sdram-qimonda-hyb18m512160af-6.h"
-#include "hsmmc.h"
-#include "pm.h"
-#include "control.h"
-#include "common-board-devices.h"
-
-#define CONFIG_DISABLE_HFCLK 1
-
-#define SDP3430_TS_GPIO_IRQ_SDPV1	3
-#define SDP3430_TS_GPIO_IRQ_SDPV2	2
-
-#define ENABLE_VAUX3_DEDICATED	0x03
-#define ENABLE_VAUX3_DEV_GRP	0x20
-
-#define TWL4030_MSECURE_GPIO 22
-
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_A),
-	KEY(0, 3, KEY_B),
-	KEY(0, 4, KEY_C),
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_E),
-	KEY(1, 3, KEY_F),
-	KEY(1, 4, KEY_G),
-	KEY(2, 0, KEY_ENTER),
-	KEY(2, 1, KEY_I),
-	KEY(2, 2, KEY_J),
-	KEY(2, 3, KEY_K),
-	KEY(2, 4, KEY_3),
-	KEY(3, 0, KEY_M),
-	KEY(3, 1, KEY_N),
-	KEY(3, 2, KEY_O),
-	KEY(3, 3, KEY_P),
-	KEY(3, 4, KEY_Q),
-	KEY(4, 0, KEY_R),
-	KEY(4, 1, KEY_4),
-	KEY(4, 2, KEY_T),
-	KEY(4, 3, KEY_U),
-	KEY(4, 4, KEY_D),
-	KEY(5, 0, KEY_V),
-	KEY(5, 1, KEY_W),
-	KEY(5, 2, KEY_L),
-	KEY(5, 3, KEY_S),
-	KEY(5, 4, KEY_H),
-	0
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data sdp3430_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 5,
-	.cols		= 6,
-	.rep		= 1,
-};
-
-#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	8
-#define SDP3430_LCD_PANEL_ENABLE_GPIO		5
-
-static void __init sdp3430_display_init(void)
-{
-	int r;
-
-	/*
-	 * the backlight GPIO doesn't directly go to the panel, it enables
-	 * an internal circuit on 3430sdp to create the signal V_BKL_28V,
-	 * this is connected to LED+ pin of the sharp panel. This GPIO
-	 * is left enabled in the board file, and not passed to the panel
-	 * as platform_data.
-	 */
-	r = gpio_request_one(SDP3430_LCD_PANEL_BACKLIGHT_GPIO,
-				GPIOF_OUT_INIT_HIGH, "LCD Backlight");
-	if (r)
-		pr_err("failed to get LCD Backlight GPIO\n");
-
-}
-
-static struct panel_sharp_ls037v7dw01_platform_data sdp3430_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 16,
-
-	.resb_gpio		= SDP3430_LCD_PANEL_ENABLE_GPIO,
-	.ini_gpio		= -1,
-	.mo_gpio		= -1,
-	.lr_gpio		= -1,
-	.ud_gpio		= -1,
-};
-
-static struct platform_device sdp3430_lcd_device = {
-	.name                   = "panel-sharp-ls037v7dw01",
-	.id                     = 0,
-	.dev.platform_data      = &sdp3430_lcd_pdata,
-};
-
-static struct connector_dvi_platform_data sdp3430_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = -1,
-};
-
-static struct platform_device sdp3430_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &sdp3430_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data sdp3430_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = -1,
-};
-
-static struct platform_device sdp3430_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &sdp3430_tfp410_pdata,
-};
-
-static struct connector_atv_platform_data sdp3430_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.invert_polarity = false,
-};
-
-static struct platform_device sdp3430_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &sdp3430_tv_pdata,
-};
-
-static struct omap_dss_board_info sdp3430_dss_data = {
-	.default_display_name = "lcd",
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		/* 8 bits (default) requires S6.3 == ON,
-		 * so the SIM card isn't used; else 4 bits.
-		 */
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_wp	= 4,
-		.deferred	= true,
-	},
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_wp	= 7,
-		.deferred	= true,
-	},
-	{}	/* Terminator */
-};
-
-static struct omap_tw4030_pdata omap_twl4030_audio_data = {
-	.voice_connected = true,
-	.custom_routing	= true,
-
-	.has_hs		= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-	.has_hf		= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-
-	.has_mainmic	= true,
-	.has_submic	= true,
-	.has_hsmic	= true,
-	.has_linein	= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-};
-
-static int sdp3430_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	/* gpio + 0 is "mmc0_cd" (input/IRQ),
-	 * gpio + 1 is "mmc1_cd" (input/IRQ)
-	 */
-	mmc[0].gpio_cd = gpio + 0;
-	mmc[1].gpio_cd = gpio + 1;
-	omap_hsmmc_late_init(mmc);
-
-	/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
-	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl");
-
-	/* gpio + 15 is "sub_lcd_nRST" (output) */
-	gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST");
-
-	omap_twl4030_audio_data.jack_detect = gpio + 2;
-	omap_twl4030_audio_init("SDP3430", &omap_twl4030_audio_data);
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
-	.pulldowns	= BIT(2) | BIT(6) | BIT(8) | BIT(13)
-				| BIT(16) | BIT(17),
-	.setup		= sdp3430_twl_gpio_setup,
-};
-
-/* regulator consumer mappings */
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply sdp3430_vsim_supplies[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-/*
- * Apply all the fixed voltages since most versions of U-Boot
- * don't bother with that initialization.
- */
-
-/* VAUX1 for mainboard (irda and sub-lcd) */
-static struct regulator_init_data sdp3430_vaux1 = {
-	.constraints = {
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-/* VAUX2 for camera module */
-static struct regulator_init_data sdp3430_vaux2 = {
-	.constraints = {
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-/* VAUX3 for LCD board */
-static struct regulator_init_data sdp3430_vaux3 = {
-	.constraints = {
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(sdp3430_vaux3_supplies),
-	.consumer_supplies		= sdp3430_vaux3_supplies,
-};
-
-/* VAUX4 for OMAP VDD_CSI2 (camera) */
-static struct regulator_init_data sdp3430_vaux4 = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data sdp3430_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vmmc1_supplies),
-	.consumer_supplies	= sdp3430_vmmc1_supplies,
-};
-
-/* VMMC2 for MMC2 card */
-static struct regulator_init_data sdp3430_vmmc2 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 1850000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vmmc2_supplies),
-	.consumer_supplies	= sdp3430_vmmc2_supplies,
-};
-
-/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data sdp3430_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vsim_supplies),
-	.consumer_supplies	= sdp3430_vsim_supplies,
-};
-
-static struct twl4030_platform_data sdp3430_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &sdp3430_gpio_data,
-	.keypad		= &sdp3430_kp_data,
-
-	.vaux1		= &sdp3430_vaux1,
-	.vaux2		= &sdp3430_vaux2,
-	.vaux3		= &sdp3430_vaux3,
-	.vaux4		= &sdp3430_vaux4,
-	.vmmc1		= &sdp3430_vmmc1,
-	.vmmc2		= &sdp3430_vmmc2,
-	.vsim		= &sdp3430_vsim,
-};
-
-static int __init omap3430_i2c_init(void)
-{
-	/* i2c1 for PMIC only */
-	omap3_pmic_get_config(&sdp3430_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
-			TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-	sdp3430_twldata.vdac->constraints.apply_uV = true;
-	sdp3430_twldata.vpll2->constraints.apply_uV = true;
-	sdp3430_twldata.vpll2->constraints.name = "VDVI";
-
-	sdp3430_twldata.audio->codec->hs_extmute = 1;
-	sdp3430_twldata.audio->codec->hs_extmute_gpio = -EINVAL;
-
-	omap3_pmic_init("twl4030", &sdp3430_twldata);
-
-	/* i2c2 on camera connector (for sensor control) and optional isp1301 */
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	/* i2c3 on display connector (for DVI, tfp410) */
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-
-static struct omap_smc91x_platform_data board_smc91x_data = {
-	.cs		= 3,
-	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
-				IORESOURCE_IRQ_LOWLEVEL,
-};
-
-static void __init board_smc91x_init(void)
-{
-	if (omap_rev() > OMAP3430_REV_ES1_0)
-		board_smc91x_data.gpio_irq = 6;
-	else
-		board_smc91x_data.gpio_irq = 29;
-
-	gpmc_smc91x_init(&board_smc91x_data);
-}
-
-#else
-
-static inline void board_smc91x_init(void)
-{
-}
-
-#endif
-
-static void enable_board_wakeup_source(void)
-{
-	/* T2 interrupt line (keypad) */
-	omap_mux_init_signal("sys_nirq",
-		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 1,
-		.reset_gpio = 57,
-		.vcc_gpio = -EINVAL,
-	},
-	{
-		.port = 2,
-		.reset_gpio = 61,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define board_mux	NULL
-#endif
-
-/*
- * SDP3430 V2 Board CS organization
- * Different from SDP3430 V1. Now 4 switches used to specify CS
- *
- * See also the Switch S8 settings in the comments.
- */
-static char chip_sel_3430[][GPMC_CS_NUM] = {
-	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
-	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
-	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
-};
-
-static struct mtd_partition sdp_nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-		.name		= "Bootloader-NOR",
-		.offset		= 0,
-		.size		= SZ_256K,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-		.name		= "Params-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_256K,
-		.mask_flags	= 0,
-	},
-	/* kernel */
-	{
-		.name		= "Kernel-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0
-	},
-	/* file system */
-	{
-		.name		= "Filesystem-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct mtd_partition sdp_onenand_partitions[] = {
-	{
-		.name		= "X-Loader-OneNAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "U-Boot-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "U-Boot Environment-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * (64 * 2048),
-	},
-	{
-		.name		= "Kernel-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 16 * (64 * 2048),
-	},
-	{
-		.name		= "File System-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct mtd_partition sdp_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1c0000 */
-		.size		= 6 * (64 * 2048),
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
-		.size		= 40 * (64 * 2048),
-	},
-	{
-		.name		= "File System - NAND",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x780000 */
-	},
-};
-
-static struct flash_partitions sdp_flash_partitions[] = {
-	{
-		.parts = sdp_nor_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_nor_partitions),
-	},
-	{
-		.parts = sdp_onenand_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
-	},
-	{
-		.parts = sdp_nand_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_nand_partitions),
-	},
-};
-
-static void __init omap_3430sdp_init(void)
-{
-	int gpio_pendown;
-
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_hsmmc_init(mmc);
-	omap3430_i2c_init();
-	omap_display_init(&sdp3430_dss_data);
-	platform_device_register(&sdp3430_lcd_device);
-	platform_device_register(&sdp3430_tfp410_device);
-	platform_device_register(&sdp3430_dvi_connector_device);
-	platform_device_register(&sdp3430_tv_connector_device);
-
-	if (omap_rev() > OMAP3430_REV_ES1_0)
-		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
-	else
-		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
-	omap_ads7846_init(1, gpio_pendown, 310, NULL);
-	omap_serial_init();
-	omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-	board_smc91x_init();
-	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
-	sdp3430_display_init();
-	enable_board_wakeup_source();
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-}
-
-MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
-	/* Maintainer: Syed Khasim - Texas Instruments Inc */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= omap_3430sdp_init,
-	.init_late	= omap3430_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 212c3160de18..8168ddabaeda 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -24,6 +24,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/omap-gpmc.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index c6df8eec4553..91738a14ecbe 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -25,6 +25,7 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/omap-gpmc.h>
 #include <linux/platform_data/gpio-omap.h>
 
 #include <linux/platform_data/at24.h>
@@ -51,8 +52,6 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
-#include "gpmc.h"
-#include "gpmc-nand.h"
 
 #define CM_T35_GPIO_PENDOWN		57
 #define SB_T35_USB_HUB_RESET_GPIO	167
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 8a2c1677964c..794756df8529 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/omap-gpmc.h>
 #include <linux/rtc-v3020.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -41,7 +42,6 @@
 
 #include "common.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include "gpmc.h"
 
 #include "am35xx.h"
 
@@ -50,7 +50,6 @@
 #include "hsmmc.h"
 #include "common-board-devices.h"
 #include "am35xx-emac.h"
-#include "gpmc-nand.h"
 
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led cm_t3517_leds[] = {
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 2d245c2e641c..70b21cc279ba 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/omap-gpmc.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
@@ -23,8 +24,6 @@
 #include "soc.h"
 #include "common.h"
 #include "board-flash.h"
-#include "gpmc-onenand.h"
-#include "gpmc-nand.h"
 
 #define REG_FPGA_REV			0x10
 #define REG_FPGA_DIP_SWITCH_INPUT2	0x60
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index 2fb5d41a9fae..ea9aaebe11e7 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -12,7 +12,6 @@
  */
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include "gpmc.h"
 
 #define PDC_NOR		1
 #define PDC_NAND	2
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index e0ad64fde20e..b6443a4e0c78 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -23,7 +23,6 @@
 #include <linux/usb/musb.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
 #include <linux/platform_data/mmc-omap.h>
 #include <linux/mfd/menelaus.h>
 #include <sound/tlv320aic3x.h>
@@ -34,7 +33,6 @@
 #include "common.h"
 #include "mmc.h"
 #include "soc.h"
-#include "gpmc-onenand.h"
 #include "common-board-devices.h"
 
 #define TUSB6010_ASYNC_CS	1
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index f32201656cf3..7f1708738c30 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -24,6 +24,7 @@
 #include <linux/spi/spi.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
+#include <linux/omap-gpmc.h>
 #include <linux/wl12xx.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
@@ -51,7 +52,6 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
-#include "gpmc-nand.h"
 
 #define PANDORA_WIFI_IRQ_GPIO		21
 #define PANDORA_WIFI_NRESET_GPIO	23
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 3d5040f82e90..03502abe4f2e 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -23,6 +23,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
+#include <linux/omap-gpmc.h>
 #include <linux/mmc/host.h>
 #include <linux/power/isp1704_charger.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
@@ -32,7 +33,6 @@
 
 #include "common.h"
 #include <linux/omap-dma.h>
-#include "gpmc-smc91x.h"
 
 #include "board-rx51.h"
 
@@ -55,8 +55,6 @@
 #include "omap-pm.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"