Merge tag 'wireless-drivers-next-for-davem-2015-06-18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
Major changes:

mwifiex:

* enhancements for AP mode: support verbose information in station
  dump command and also information about AP link.
* enable power save by default

brcmfmac:

* fix module reload issue for PCIe
* improving msgbuf protocol for PCIe devices
* rework .get_station() cfg80211 callback operation
* determine interface combinations upon device feature support

ath9k:

* ath9k_htc: add support of channel switch

wil6210:

* add modparam for bcast ring size
* support hidden SSID
* add per-MCS Rx stats
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

86 files changed, 1740 insertions, 902 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index a7d9bfe04c6b..2e122946692c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8169,8 +8169,6 @@ P:	rt2x00 project
 M:	Stanislaw Gruszka <sgruszka@redhat.com>
 M:	Helmut Schaa <helmut.schaa@googlemail.com>
 L:	linux-wireless@vger.kernel.org
-L:	users@rt2x00.serialmonkey.com (moderated for non-subscribers)
-W:	http://rt2x00.serialmonkey.com/
 S:	Maintained
 F:	drivers/net/wireless/rt2x00/
 
diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
index fc6ffcfa8061..be5fffb6da24 100644
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -29,12 +29,6 @@ config BCMA_HOST_PCI
 	select BCMA_DRIVER_PCI
 	default y
 
-config BCMA_DRIVER_PCI_HOSTMODE
-	bool "Driver for PCI core working in hostmode"
-	depends on BCMA && MIPS && BCMA_HOST_PCI
-	help
-	  PCI core hostmode operation (external PCI bus).
-
 config BCMA_HOST_SOC
 	bool "Support for BCMA in a SoC"
 	depends on BCMA
@@ -61,6 +55,12 @@ config BCMA_DRIVER_PCI
 	  This driver is also prerequisite for a hostmode PCIe core
 	  support.
 
+config BCMA_DRIVER_PCI_HOSTMODE
+	bool "Driver for PCI core working in hostmode"
+	depends on BCMA && MIPS && BCMA_DRIVER_PCI
+	help
+	  PCI core hostmode operation (external PCI bus).
+
 config BCMA_DRIVER_MIPS
 	bool "BCMA Broadcom MIPS core driver"
 	depends on BCMA && MIPS
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index bcccae19325d..59496a90ad5e 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -48,6 +48,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.name = "qca988x hw2.0",
 		.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
 		.uart_pin = 7,
+		.has_shifted_cc_wraparound = true,
 		.fw = {
 			.dir = QCA988X_HW_2_0_FW_DIR,
 			.fw = QCA988X_HW_2_0_FW_FILE,
@@ -1084,6 +1085,22 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
 	if (status)
 		goto err;
 
+	/* Some of of qca988x solutions are having global reset issue
+         * during target initialization. Bypassing PLL setting before
+         * downloading firmware and letting the SoC run on REF_CLK is
+         * fixing the problem. Corresponding firmware change is also needed
+         * to set the clock source once the target is initialized.
+	 */
+	if (test_bit(ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT,
+		     ar->fw_features)) {
+		status = ath10k_bmi_write32(ar, hi_skip_clock_init, 1);
+		if (status) {
+			ath10k_err(ar, "could not write to skip_clock_init: %d\n",
+				   status);
+			goto err;
+		}
+	}
+
 	status = ath10k_download_fw(ar, mode);
 	if (status)
 		goto err;
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 70fcdc9c2758..78094f23c9dd 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -284,15 +284,6 @@ struct ath10k_sta {
 #endif
 };
 
-struct ath10k_chanctx {
-	/* Used to story copy of chanctx_conf to avoid inconsistencies. Ideally
-	 * mac80211 should allow some sort of explicit locking to guarantee
-	 * that the publicly available chanctx_conf can be accessed safely at
-	 * all times.
-	 */
-	struct ieee80211_chanctx_conf conf;
-};
-
 #define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5*HZ)
 
 enum ath10k_beacon_state {
@@ -468,6 +459,9 @@ enum ath10k_fw_features {
 	 */
 	ATH10K_FW_FEATURE_NO_NWIFI_DECAP_4ADDR_PADDING,
 
+	/* Firmware supports bypassing PLL setting on init. */
+	ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT = 9,
+
 	/* keep last */
 	ATH10K_FW_FEATURE_COUNT,
 };
@@ -577,6 +571,13 @@ struct ath10k {
 		u32 patch_load_addr;
 		int uart_pin;
 
+		/* This is true if given HW chip has a quirky Cycle Counter
+		 * wraparound which resets to 0x7fffffff instead of 0. All
+		 * other CC related counters (e.g. Rx Clear Count) are divided
+		 * by 2 so they never wraparound themselves.
+		 */
+		bool has_shifted_cc_wraparound;
+
 		struct ath10k_hw_params_fw {
 			const char *dir;
 			const char *fw;
@@ -694,6 +695,14 @@ struct ath10k {
 	u32 survey_last_cycle_count;
 	struct survey_info survey[ATH10K_NUM_CHANS];
 
+	/* Channel info events are expected to come in pairs without and with
+	 * COMPLETE flag set respectively for each channel visit during scan.
+	 *
+	 * However there are deviations from this rule. This flag is used to
+	 * avoid reporting garbage data.
+	 */
+	bool ch_info_can_report_survey;
+
 	struct dfs_pattern_detector *dfs_detector;
 
 	unsigned long tx_paused; /* see ATH10K_TX_PAUSE_ */
diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c
index 839a8791fb9e..5997f00afe3b 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/types.h>
+#include "core.h"
 #include "hw.h"
 
 const struct ath10k_hw_regs qca988x_regs = {
@@ -56,3 +57,23 @@ const struct ath10k_hw_regs qca6174_regs = {
 	.soc_chip_id_address			= 0x000f0,
 	.scratch_3_address			= 0x0028,
 };
+
+void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
+				u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev)
+{
+	u32 cc_fix = 0;
+
+	survey->filled |= SURVEY_INFO_TIME |
+			  SURVEY_INFO_TIME_BUSY;
+
+	if (ar->hw_params.has_shifted_cc_wraparound && cc < cc_prev) {
+		cc_fix = 0x7fffffff;
+		survey->filled &= ~SURVEY_INFO_TIME_BUSY;
+	}
+
+	cc -= cc_prev - cc_fix;
+	rcc -= rcc_prev;
+
+	survey->time = CCNT_TO_MSEC(cc);
+	survey->time_busy = CCNT_TO_MSEC(rcc);
+}
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 89e09cbeac19..85cca29375fe 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -169,6 +169,9 @@ struct ath10k_hw_regs {
 extern const struct ath10k_hw_regs qca988x_regs;
 extern const struct ath10k_hw_regs qca6174_regs;
 
+void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
+				u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev);
+
 #define QCA_REV_988X(ar) ((ar)->hw_rev == ATH10K_HW_QCA988X)
 #define QCA_REV_6174(ar) ((ar)->hw_rev == ATH10K_HW_QCA6174)
 
@@ -449,6 +452,9 @@ enum ath10k_hw_rate_cck {
 #define SCRATCH_3_ADDRESS			ar->regs->scratch_3_address
 #define CPU_INTR_ADDRESS			0x0010
 
+/* Cycle counters are running at 88MHz */
+#define CCNT_TO_MSEC(x) ((x) / 88000)
+
 /* Firmware indications to the Host via SCRATCH_3 register. */
 #define FW_INDICATOR_ADDRESS	(SOC_CORE_BASE_ADDRESS + SCRATCH_3_ADDRESS)
 #define FW_IND_EVENT_PENDING			1
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 609ca8619ebd..218b6af63447 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3949,83 +3949,6 @@ static int ath10k_config_ps(struct ath10k *ar)
 	return ret;
 }
 
-static void ath10k_mac_chan_reconfigure(struct ath10k *ar)
-{
-	struct ath10k_vif *arvif;
-	struct cfg80211_chan_def def;
-	int ret;
-
-	lockdep_assert_held(&ar->conf_mutex);
-
-	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac chan reconfigure\n");
-
-	/* First stop monitor interface. Some FW versions crash if there's a
-	 * lone monitor interface. */
-	if (ar->monitor_started)
-		ath10k_monitor_stop(ar);
-
-	list_for_each_entry(arvif, &ar->arvifs, list) {
-		if (!arvif->is_started)
-			continue;
-
-		if (!arvif->is_up)
-			continue;
-
-		if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
-			continue;
-
-		ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
-		if (ret) {
-			ath10k_warn(ar, "failed to down vdev %d: %d\n",
-				    arvif->vdev_id, ret);
-			continue;
-		}
-	}
-
-	/* all vdevs are downed now - attempt to restart and re-up them */
-
-	list_for_each_entry(arvif, &ar->arvifs, list) {
-		if (!arvif->is_started)
-			continue;
-
-		if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
-			continue;
-
-		ret = ath10k_mac_setup_bcn_tmpl(arvif);
-		if (ret)
-			ath10k_warn(ar, "failed to update bcn tmpl during csa: %d\n",
-				    ret);
-
-		ret = ath10k_mac_setup_prb_tmpl(arvif);
-		if (ret)
-			ath10k_warn(ar, "failed to update prb tmpl during csa: %d\n",
-				    ret);
-
-		if (WARN_ON(ath10k_mac_vif_chan(arvif->vif, &def)))
-			continue;
-
-		ret = ath10k_vdev_restart(arvif, &def);
-		if (ret) {
-			ath10k_warn(ar, "failed to restart vdev %d: %d\n",
-				    arvif->vdev_id, ret);
-			continue;
-		}
-
-		if (!arvif->is_up)
-			continue;
-
-		ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
-					 arvif->bssid);
-		if (ret) {
-			ath10k_warn(ar, "failed to bring vdev up %d: %d\n",
-				    arvif->vdev_id, ret);
-			continue;
-		}
-	}
-
-	ath10k_monitor_recalc(ar);
-}
-
 static int ath10k_mac_txpower_setup(struct ath10k *ar, int txpower)
 {
 	int ret;
@@ -6144,7 +6067,10 @@ static int ath10k_ampdu_action(struct ieee80211_hw *hw,
 }
 
 static void
-ath10k_mac_update_rx_channel(struct ath10k *ar)
+ath10k_mac_update_rx_channel(struct ath10k *ar,
+			     struct ieee80211_chanctx_conf *ctx,
+			     struct ieee80211_vif_chanctx_switch *vifs,
+			     int n_vifs)
 {
 	struct cfg80211_chan_def *def = NULL;
 
@@ -6154,6 +6080,9 @@ ath10k_mac_update_rx_channel(struct ath10k *ar)
 	lockdep_assert_held(&ar->conf_mutex);
 	lockdep_assert_held(&ar->data_lock);
 
+	WARN_ON(ctx && vifs);
+	WARN_ON(vifs && n_vifs != 1);
+
 	/* FIXME: Sort of an optimization and a workaround. Peers and vifs are
 	 * on a linked list now. Doing a lookup peer -> vif -> chanctx for each
 	 * ppdu on Rx may reduce performance on low-end systems. It should be
@@ -6165,36 +6094,28 @@ ath10k_mac_update_rx_channel(struct ath10k *ar)
 	 * affected much.
 	 */
 	rcu_read_lock();
-	if (ath10k_mac_num_chanctxs(ar) == 1) {
+	if (!ctx && ath10k_mac_num_chanctxs(ar) == 1) {
 		ieee80211_iter_chan_contexts_atomic(ar->hw,
 					ath10k_mac_get_any_chandef_iter,
 					&def);
+
+		if (vifs)
+			def = &vifs[0].new_ctx->def;
+
 		ar->rx_channel = def->chan;
+	} else if (ctx && ath10k_mac_num_chanctxs(ar) == 0) {
+		ar->rx_channel = ctx->def.chan;
 	} else {
 		ar->rx_channel = NULL;
 	}
 	rcu_read_unlock();
 }
 
-static void
-ath10k_mac_chan_ctx_init(struct ath10k *ar,
-			 struct ath10k_chanctx *arctx,
-			 struct ieee80211_chanctx_conf *conf)
-{
-	lockdep_assert_held(&ar->conf_mutex);
-	lockdep_assert_held(&ar->data_lock);
-
-	memset(arctx, 0, sizeof(*arctx));
-
-	arctx->conf = *conf;
-}
-
 static int
 ath10k_mac_op_add_chanctx(struct ieee80211_hw *hw,
 			  struct ieee80211_chanctx_conf *ctx)
 {
 	struct ath10k *ar = hw->priv;
-	struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
 
 	ath10k_dbg(ar, ATH10K_DBG_MAC,
 		   "mac chanctx add freq %hu width %d ptr %p\n",
@@ -6203,8 +6124,7 @@ ath10k_mac_op_add_chanctx(struct ieee80211_hw *hw,
 	mutex_lock(&ar->conf_mutex);
 
 	spin_lock_bh(&ar->data_lock);
-	ath10k_mac_chan_ctx_init(ar, arctx, ctx);
-	ath10k_mac_update_rx_channel(ar);
+	ath10k_mac_update_rx_channel(ar, ctx, NULL, 0);
 	spin_unlock_bh(&ar->data_lock);
 
 	ath10k_recalc_radar_detection(ar);
@@ -6228,7 +6148,7 @@ ath10k_mac_op_remove_chanctx(struct ieee80211_hw *hw,
 	mutex_lock(&ar->conf_mutex);
 
 	spin_lock_bh(&ar->data_lock);
-	ath10k_mac_update_rx_channel(ar);
+	ath10k_mac_update_rx_channel(ar, NULL, NULL, 0);
 	spin_unlock_bh(&ar->data_lock);
 
 	ath10k_recalc_radar_detection(ar);
@@ -6243,16 +6163,12 @@ ath10k_mac_op_change_chanctx(struct ieee80211_hw *hw,
 			     u32 changed)
 {
 	struct ath10k *ar = hw->priv;
-	struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
 
 	mutex_lock(&ar->conf_mutex);
 
 	ath10k_dbg(ar, ATH10K_DBG_MAC,
-