Merge tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains a handful of new features:

   - Partial support for the Kendryte K210.

     There are still a few outstanding issues that I have patches for,
     but I don't actually have a board to test them so they're not
     included yet.

   - SBI v0.2 support.

   - Fixes to support for building with LLVM-based toolchains. The
     resulting images are known not to boot yet.

  I don't anticipate a part two, but I'll probably have something early
  in the RCs to finish up the K210 support"

* tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
  riscv: create a loader.bin boot image for Kendryte SoC
  riscv: Kendryte K210 default config
  riscv: Add Kendryte K210 device tree
  riscv: Select required drivers for Kendryte SOC
  riscv: Add Kendryte K210 SoC support
  riscv: Add SOC early init support
  riscv: Unaligned load/store handling for M_MODE
  RISC-V: Support cpu hotplug
  RISC-V: Add supported for ordered booting method using HSM
  RISC-V: Add SBI HSM extension definitions
  RISC-V: Export SBI error to linux error mapping function
  RISC-V: Add cpu_ops and modify default booting method
  RISC-V: Move relocate and few other functions out of __init
  RISC-V: Implement new SBI v0.2 extensions
  RISC-V: Introduce a new config for SBI v0.1
  RISC-V: Add SBI v0.2 extension definitions
  RISC-V: Add basic support for SBI v0.2
  RISC-V: Mark existing SBI as 0.1 SBI.
  riscv: Use macro definition instead of magic number
  riscv: Add support to dump the kernel page tables
  ...

54 files changed, 3093 insertions, 294 deletions

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 8672e77a5b7a..a197258595ef 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -20,7 +20,6 @@ config RISCV
 	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_CPU_DEVICES
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
@@ -29,6 +28,7 @@ config RISCV
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_ATOMIC64 if !64BIT
 	select GENERIC_IOREMAP
+	select GENERIC_PTDUMP if MMU
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ASM_MODVERSIONS
@@ -58,6 +58,9 @@ config RISCV
 	select HAVE_EBPF_JIT
 	select EDAC_SUPPORT
 	select ARCH_HAS_GIGANTIC_PAGE
+	select ARCH_HAS_SET_DIRECT_MAP
+	select ARCH_HAS_SET_MEMORY
+	select ARCH_HAS_STRICT_KERNEL_RWX
 	select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
 	select SPARSEMEM_STATIC if 32BIT
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
@@ -129,6 +132,9 @@ config ARCH_SELECT_MEMORY_MODEL
 config ARCH_WANT_GENERAL_HUGETLB
 	def_bool y
 
+config ARCH_SUPPORTS_DEBUG_PAGEALLOC
+	def_bool y
+
 config SYS_SUPPORTS_HUGETLBFS
 	def_bool y
 
@@ -247,6 +253,17 @@ config NR_CPUS
 	depends on SMP
 	default "8"
 
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP
+	select GENERIC_IRQ_MIGRATION
+	help
+
+	  Say Y here to experiment with turning CPUs off and on.  CPUs
+	  can be controlled through /sys/devices/system/cpu.
+
+	  Say N if you want to disable CPU hotplug.
+
 choice
 	prompt "CPU Tuning"
 	default TUNE_GENERIC
@@ -307,6 +324,13 @@ config SECCOMP
 	  and the task is only allowed to execute a few safe syscalls
 	  defined by each seccomp mode.
 
+config RISCV_SBI_V01
+	bool "SBI v0.1 support"
+	default y
+	depends on RISCV_SBI
+	help
+	  This config allows kernel to use SBI v0.1 APIs. This will be
+	  deprecated in future once legacy M-mode software are no longer in use.
 endmenu
 
 menu "Boot options"
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index a131174a0a77..216286db81c9 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -20,4 +20,14 @@ config SOC_VIRT
        help
          This enables support for QEMU Virt Machine.
 
+config SOC_KENDRYTE
+	bool "Kendryte K210 SoC"
+	depends on !MMU
+	select BUILTIN_DTB
+	select SERIAL_SIFIVE if TTY
+	select SERIAL_SIFIVE_CONSOLE if TTY
+	select SIFIVE_PLIC
+	help
+	  This enables support for Kendryte K210 SoC platform hardware.
+
 endmenu
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 259cb53d7f20..fb6e37db836d 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -85,12 +85,12 @@ PHONY += vdso_install
 vdso_install:
 	$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
 
-ifeq ($(CONFIG_RISCV_M_MODE),y)
-KBUILD_IMAGE := $(boot)/loader
+ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_KENDRYTE),yy)
+KBUILD_IMAGE := $(boot)/loader.bin
 else
 KBUILD_IMAGE := $(boot)/Image.gz
 endif
-BOOT_TARGETS := Image Image.gz loader
+BOOT_TARGETS := Image Image.gz loader loader.bin
 
 all:	$(notdir $(KBUILD_IMAGE))
 
diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
index 36db8145f9f4..3530c59b3ea7 100644
--- a/arch/riscv/boot/Makefile
+++ b/arch/riscv/boot/Makefile
@@ -41,6 +41,9 @@ $(obj)/Image.lzma: $(obj)/Image FORCE
 $(obj)/Image.lzo: $(obj)/Image FORCE
 	$(call if_changed,lzo)
 
+$(obj)/loader.bin: $(obj)/loader FORCE
+	$(call if_changed,objcopy)
+
 install:
 	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index dcc3ada78455..557f0b519c8e 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 subdir-y += sifive
+subdir-y += kendryte
diff --git a/arch/riscv/boot/dts/kendryte/Makefile b/arch/riscv/boot/dts/kendryte/Makefile
new file mode 100644
index 000000000000..815444e69e89
--- /dev/null
+++ b/arch/riscv/boot/dts/kendryte/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_KENDRYTE) += k210.dtb
diff --git a/arch/riscv/boot/dts/kendryte/k210.dts b/arch/riscv/boot/dts/kendryte/k210.dts
new file mode 100644
index 000000000000..0d1f28fce6b2
--- /dev/null
+++ b/arch/riscv/boot/dts/kendryte/k210.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+/ {
+	model = "Kendryte K210 generic";
+	compatible = "kendryte,k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0";
+	};
+};
+
+&uarths0 {
+	status = "okay";
+};
+
diff --git a/arch/riscv/boot/dts/kendryte/k210.dtsi b/arch/riscv/boot/dts/kendryte/k210.dtsi
new file mode 100644
index 000000000000..c1df56ccb8d5
--- /dev/null
+++ b/arch/riscv/boot/dts/kendryte/k210.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+#include <dt-bindings/clock/k210-clk.h>
+
+/ {
+	/*
+	 * Although the K210 is a 64-bit CPU, the address bus is only 32-bits
+	 * wide, and the upper half of all addresses is ignored.
+	 */
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "kendryte,k210";
+
+	aliases {
+		serial0 = &uarths0;
+	};
+
+	/*
+	 * The K210 has an sv39 MMU following the priviledge specification v1.9.
+	 * Since this is a non-ratified draft specification, the kernel does not
+	 * support it and the K210 support enabled only for the !MMU case.
+	 * Be consistent with this by setting the CPUs MMU type to "none".
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <7800000>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
+			riscv,isa = "rv64imafdc";
+			mmu-type = "none";
+			i-cache-size = <0x8000>;
+			i-cache-block-size = <64>;
+			d-cache-size = <0x8000>;
+			d-cache-block-size = <64>;
+			clocks = <&sysctl K210_CLK_CPU>;
+			clock-frequency = <390000000>;
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			reg = <1>;
+			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
+			riscv,isa = "rv64imafdc";
+			mmu-type = "none";
+			i-cache-size = <0x8000>;
+			i-cache-block-size = <64>;
+			d-cache-size = <0x8000>;
+			d-cache-block-size = <64>;
+			clocks = <&sysctl K210_CLK_CPU>;
+			clock-frequency = <390000000>;
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+	};
+
+	sram: memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x400000>,
+		      <0x80400000 0x200000>,
+		      <0x80600000 0x200000>;
+		reg-names = "sram0", "sram1", "aisram";
+	};
+
+	clocks {
+		in0: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "kendryte,k210-soc", "simple-bus";
+		ranges;
+		interrupt-parent = <&plic0>;
+
+		sysctl: sysctl@50440000 {
+			compatible = "kendryte,k210-sysctl", "simple-mfd";
+			reg = <0x50440000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		clint0: interrupt-controller@2000000 {
+			compatible = "riscv,clint0";
+			reg = <0x2000000 0xC000>;
+			interrupts-extended = <&cpu0_intc 3>,  <&cpu1_intc 3>;
+			clocks = <&sysctl K210_CLK_ACLK>;
+		};
+
+		plic0: interrupt-controller@c000000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "kendryte,k210-plic0", "riscv,plic0";
+			reg = <0xC000000 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 0xffffffff>,
+					      <&cpu1_intc 11>, <&cpu1_intc 0xffffffff>;
+			riscv,ndev = <65>;
+			riscv,max-priority = <7>;
+		};
+
+		uarths0: serial@38000000 {
+			compatible = "kendryte,k210-uarths", "sifive,uart0";
+			reg = <0x38000000 0x1000>;
+			interrupts = <33>;
+			clocks = <&sysctl K210_CLK_CPU>;
+		};
+	};
+};
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 2557c5372a25..4da4886246a4 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -128,3 +128,4 @@ CONFIG_DEBUG_BLOCK_EXT_DEVT=y
 # CONFIG_FTRACE is not set
 # CONFIG_RUNTIME_TESTING_MENU is not set
 CONFIG_MEMTEST=y
+# CONFIG_SYSFS_SYSCALL is not set
diff --git a/arch/riscv/configs/nommu_k210_defconfig b/arch/riscv/configs/nommu_k210_defconfig
new file mode 100644
index 000000000000..632aa2f95e57
--- /dev/null
+++ b/arch/riscv/configs/nommu_k210_defconfig
@@ -0,0 +1,68 @@
+# CONFIG_CPU_ISOLATION is not set
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_FORCE=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+# CONFIG_BOOT_CONFIG is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_SYSFS_SYSCALL is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_IO_URING is not set
+# CONFIG_ADVISE_SYSCALLS is not set
+# CONFIG_MEMBARRIER is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+# CONFIG_SLAB_MERGE_DEFAULT is not set
+# CONFIG_MMU is not set
+CONFIG_SOC_KENDRYTE=y
+CONFIG_MAXPHYSMEM_2GB=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_CMDLINE="earlycon console=ttySIF0"
+CONFIG_CMDLINE_FORCE=y
+CONFIG_USE_BUILTIN_DTB=y
+CONFIG_BUILTIN_DTB_SOURCE="kendryte/k210"
+# CONFIG_BLOCK is not set
+CONFIG_BINFMT_FLAT=y
+# CONFIG_COREDUMP is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LDISC_AUTOLOAD is not set
+# CONFIG_DEVMEM is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_LSM="[]"
+CONFIG_PRINTK_TIME=y
+# CONFIG_DEBUG_MISC is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_RUNTIME_TESTING_MENU is not set
diff --git a/arch/riscv/configs/rv32_defconfig b/arch/riscv/configs/rv32_defconfig
index 0292879a9690..05bbf5240569 100644
--- a/arch/riscv/configs/rv32_defconfig
+++ b/arch/riscv/configs/rv32_defconfig
@@ -124,3 +124,4 @@ CONFIG_DEBUG_BLOCK_EXT_DEVT=y
 # CONFIG_FTRACE is not set
 # CONFIG_RUNTIME_TESTING_MENU is not set
 CONFIG_MEMTEST=y
+# CONFIG_SYSFS_SYSCALL is not set
diff --git a/arch/riscv/include/asm/bug.h b/arch/riscv/include/asm/bug.h
index 75604fec1b1b..d6f1ec08d97b 100644
--- a/arch/riscv/include/asm/bug.h
+++ b/arch/riscv/include/asm/bug.h
@@ -19,6 +19,14 @@
 #define __BUG_INSN_32	_UL(0x00100073) /* ebreak */
 #define __BUG_INSN_16	_UL(0x9002) /* c.ebreak */
 
+#define GET_INSN_LENGTH(insn)						\
+({									\
+	unsigned long __len;						\
+	__len = ((insn & __INSN_LENGTH_MASK) == __INSN_LENGTH_32) ?	\
+		4UL : 2UL;						\
+	__len;								\
+})
+
 typedef u32 bug_insn_t;
 
 #ifdef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
diff --git a/arch/riscv/include/asm/cacheflush.h b/arch/riscv/include/asm/cacheflush.h
index 555b20b11dc3..c8677c75f82c 100644
--- a/arch/riscv/include/asm/cacheflush.h
+++ b/arch/riscv/include/asm/cacheflush.h
@@ -85,7 +85,7 @@ static inline void flush_dcache_page(struct page *page)
  * so instead we just flush the whole thing.
  */
 #define flush_icache_range(start, end) flush_icache_all()
-#define flush_icache_user_range(vma, pg, addr, len) flush_icache_all()
+#define flush_icache_user_range(vma, pg, addr, len) flush_icache_mm(vma->vm_mm, 0)
 
 #ifndef CONFIG_SMP
 
diff --git a/arch/riscv/include/asm/cpu_ops.h b/arch/riscv/include/asm/cpu_ops.h
new file mode 100644
index 000000000000..a8ec3c5c1bd2
--- /dev/null
+++ b/arch/riscv/include/asm/cpu_ops.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ * Based on arch/arm64/include/asm/cpu_ops.h
+ */
+#ifndef __ASM_CPU_OPS_H
+#define __ASM_CPU_OPS_H
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/threads.h>
+
+/**
+ * struct cpu_operations - Callback operations for hotplugging CPUs.
+ *
+ * @name:		Name of the boot protocol.
+ * @cpu_prepare:	Early one-time preparation step for a cpu. If there
+ *			is a mechanism for doing so, tests whether it is
+ *			possible to boot the given HART.
+ * @cpu_start:		Boots a cpu into the kernel.
+ * @cpu_disable:	Prepares a cpu to die. May fail for some
+ *			mechanism-specific reason, which will cause the hot
+ *			unplug to be aborted. Called from the cpu to be killed.
+ * @cpu_stop:		Makes a cpu leave the kernel. Must not fail. Called from
+ *			the cpu being stopped.
+ * @cpu_is_stopped:	Ensures a cpu has left the kernel. Called from another
+ *			cpu.
+ */
+struct cpu_operations {
+	const char	*name;
+	int		(*cpu_prepare)(unsigned int cpu);
+	int		(*cpu_start)(unsigned int cpu,
+				     struct task_struct *tidle);
+#ifdef CONFIG_HOTPLUG_CPU
+	int		(*cpu_disable)(unsigned int cpu);
+	void		(*cpu_stop)(void);
+	int		(*cpu_is_stopped)(unsigned int cpu);
+#endif
+};
+
+extern const struct cpu_operations *cpu_ops[NR_CPUS];
+void __init cpu_set_ops(int cpu);
+void cpu_update_secondary_bootdata(unsigned int cpuid,
+				   struct task_struct *tidle);
+
+#endif /* ifndef __ASM_CPU_OPS_H */
diff --git a/arch/riscv/include/asm/current.h b/arch/riscv/include/asm/current.h
index dd973efe5d7c..1de233d8e8de 100644
--- a/arch/riscv/include/asm/current.h
+++ b/arch/riscv/include/asm/current.h
@@ -17,6 +17,8 @@
 
 struct task_struct;
 
+register struct task_struct *riscv_current_is_tp __asm__("tp");
+
 /*
  * This only works because "struct thread_info" is at offset 0 from "struct
  * task_struct".  This constraint seems to be necessary on other architectures
@@ -26,8 +28,7 @@ struct task_struct;
  */
 static __always_inline struct task_struct *get_current(void)
 {
-	register struct task_struct *tp __asm__("tp");
-	return tp;
+	return riscv_current_is_tp;
 }
 
 #define current get_current()
diff --git a/arch/riscv/include/asm/fixmap.h b/arch/riscv/include/asm/fixmap.h
index 42d2c42f3cc9..2368d49eb4ef 100644
--- a/arch/riscv/include/asm/fixmap.h
+++ b/arch/riscv/include/asm/fixmap.h
@@ -27,6 +27,8 @@ enum fixed_addresses {
 	FIX_FDT = FIX_FDT_END + FIX_FDT_SIZE / PAGE_SIZE - 1,
 	FIX_PTE,
 	FIX_PMD,
+	FIX_TEXT_POKE1,
+	FIX_TEXT_POKE0,
 	FIX_EARLYCON_MEM_BASE,
 	__end_of_fixed_addresses
 };
diff --git a/arch/riscv/include/asm/kasan.h b/arch/riscv/include/asm/kasan.h
index eee6e6588b12..b47045cb85ce 100644
--- a/arch/riscv/include/asm/kasan.h
+++ b/arch/riscv/include/asm/kasan.h
@@ -13,7 +13,7 @@
 #define KASAN_SHADOW_SCALE_SHIFT	3
 
 #define KASAN_SHADOW_SIZE	(UL(1) << (38 - KASAN_SHADOW_SCALE_SHIFT))
-#define KASAN_SHADOW_START	0xffffffc000000000 /* 2^64 - 2^38 */
+#define KASAN_SHADOW_START	KERN_VIRT_START /* 2^64 - 2^38 */
 #define KASAN_SHADOW_END	(KASAN_SHADOW_START + KASAN_SHADOW_SIZE)
 
 #define KASAN_SHADOW_OFFSET	(KASAN_SHADOW_END - (1ULL << \
diff --git a/arch/riscv/include/asm/patch.h b/arch/riscv/include/asm/patch.h
new file mode 100644
index 000000000000..b5918a6e0615
--- /dev/null
+++ b/arch/riscv/include/asm/patch.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 SiFive
+ */
+
+#ifndef _ASM_RISCV_PATCH_H
+#define _ASM_RISCV_PATCH_H
+
+int riscv_patch_text_nosync(void *addr, const void *insns, size_t len);
+int riscv_patch_text(void *addr, u32 insn);
+
+#endif /* _ASM_RISCV_PATCH_H */
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index 393f2014dfee..9c188ad2e52d 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -449,6 +449,16 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
 /*
+ * In the RV64 Linux scheme, we give the user half of the virtual-address space
+ * and give the kernel the other (upper) half.
+ */
+#ifdef CONFIG_64BIT
+#define KERN_VIRT_START	(-(BIT(CONFIG_VA_BITS)) + TASK_SIZE)
+#else
+#define KERN_VIRT_START	FIXADDR_START
+#endif
+
+/*
  * Task size is 0x4000000000 for RV64 or 0x9fc00000 for RV32.
  * Note that PGDIR_SIZE must evenly divide TASK_SIZE.
  */
diff --git a/arch/riscv/include/asm/ptdump.h b/arch/riscv/include/asm/ptdump.h
new file mode 100644
index 000000000000..e29af7191909
--- /dev/null
+++ b/arch/riscv/include/asm/ptdump.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 SiFive
+ */
+
+#ifndef _ASM_RISCV_PTDUMP_H
+#define _ASM_RISCV_PTDUMP_H
+
+void ptdump_check_wx(void);
+
+#endif /* _ASM_RISCV_PTDUMP_H */
diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index 2570c1e683d3..653edb25d495 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (C) 2015 Regents of the University of California
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
  */
 
 #ifndef _ASM_RISCV_SBI_H
@@ -9,96 +10,148 @@
 #include <linux/types.h>
 
 #ifdef CONFIG_RISCV_SBI
-#define SBI_SET_TIMER 0
-#define SBI_CONSOLE_PUTCHAR 1
-#define SBI_CONSOLE_GETCHAR 2
-#define SBI_CLEAR_IPI 3
-#define SBI_SEND_IPI 4
-#define SBI_REMOTE_FENCE_I 5
-#define SBI_REMOTE_SFENCE_VMA 6
-#define SBI_REMOTE_SFENCE_VMA_ASID 7
-#define SBI_SHUTDOWN 8
-
-#define SBI_CALL(which, arg0, arg1, arg2, arg3) ({		\
-	register uintptr_t a0 asm ("a0") = (uintptr_t)(arg0);	\
-	register uintptr_t a1 asm ("a1") = (uintptr_t)(arg1);	\
-	register uintptr_t a2 asm ("a2") = (uintptr_t)(arg2);	\
-	register uintptr_t a3 asm ("a3") = (uintptr_t)(arg3);	\
-	register uintptr_t a7 asm ("a7") = (uintptr_t)(which);	\
-	asm volatile ("ecall"					\
-		      : "+r" (a0)				\
-		      : "r" (a1), "r" (a2), "r" (a3), "r" (a7)	\
-		      : "memory");				\
-	a0;							\
-})
-
-/* Lazy implementations until SBI is finalized */
-#define SBI_CALL_0(which) SBI_CALL(which, 0, 0, 0, 0)
-#define SBI_CALL_1(which, arg0) SBI_CALL(which, arg0, 0, 0, 0)
-#define SBI_CALL_2(which, arg0, arg1) SBI_CALL(which, arg0, arg1, 0, 0)
-#define SBI_CALL_3(which, arg0, arg1, arg2) \
-		SBI_CALL(which, arg0, arg1, arg2, 0)
-#define SBI_CALL_4(which, arg0, arg1, arg2, arg3) \
-		SBI_CALL(which, arg0, arg1, arg2, arg3)
-
-static inline void sbi_console_putchar(int ch)
-{
-	SBI_CALL_1(SBI_CONSOLE_PUTCHAR, ch);
-}
+enum sbi_ex