[ALSA] Add echoaudio sound drivers

From: Giuliano Pochini <pochini@shiny.it>Add echoaudio sound drivers (darla20, darla24, echo3g, gina20, gina24,
indigo, indigodj, indigoio, layla20, lala24, mia, mona)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

35 files changed, 9949 insertions, 0 deletions

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 87d76a5c73d0..0846b455bcf2 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -472,6 +472,22 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-darla20
+  ------------------
+
+    Module for Echoaudio Darla20
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
+  Module snd-darla24
+  ------------------
+
+    Module for Echoaudio Darla24
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-dt019x
   -----------------
 
@@ -499,6 +515,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-echo3g
+  -----------------
+
+    Module for Echoaudio 3G cards (Gina3G/Layla3G)
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-emu10k1
   ------------------
 
@@ -657,6 +681,22 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     
     The power-management is supported.
 
+  Module snd-gina20
+  -----------------
+
+    Module for Echoaudio Gina20
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
+  Module snd-gina24
+  -----------------
+
+    Module for Echoaudio Gina24
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-gusclassic
   ---------------------
 
@@ -937,6 +977,30 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  driver isn't configured properly or you want to try another
 	  type for testing.
 
+  Module snd-indigo
+  -----------------
+
+    Module for Echoaudio Indigo
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
+  Module snd-indigodj
+  -------------------
+
+    Module for Echoaudio Indigo DJ
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
+  Module snd-indigoio
+  -------------------
+
+    Module for Echoaudio Indigo IO
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-intel8x0
   -------------------
 
@@ -1036,6 +1100,22 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports multiple cards.
 
+  Module snd-layla20
+  ------------------
+
+    Module for Echoaudio Layla20
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
+  Module snd-layla24
+  ------------------
+
+    Module for Echoaudio Layla24
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-maestro3
   -------------------
 
@@ -1056,6 +1136,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-mia
+  ---------------
+
+    Module for Echoaudio Mia
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-miro
   ---------------
 
@@ -1088,6 +1176,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     When no hotplug fw loader is available, you need to load the
     firmware via mixartloader utility in alsa-tools package.
 
+  Module snd-mona
+  ---------------
+
+    Module for Echoaudio Mona
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-mpu401
   -----------------
 
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 39162af7f19e..23e54cedfd4a 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -233,6 +233,143 @@ config SND_CS5535AUDIO
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-cs5535audio.
 
+config SND_DARLA20
+	tristate "(Echoaudio) Darla20"
+	depends on SND
+	depends on FW_LOADER
+	select SND_PCM
+	help
+	  Say 'Y' or 'M' to include support for Echoaudio Darla.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-darla20
+
+config SND_GINA20
+	tristate "(Echoaudio) Gina20"
+	depends on SND
+	depends on FW_LOADER
+	select SND_PCM
+	help
+	  Say 'Y' or 'M' to include support for Echoaudio Gina.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-gina20
+
+config SND_LAYLA20
+	tristate "(Echoaudio) Layla20"
+	depends on SND
+	depends on FW_LOADER
+	select SND_RAWMIDI
+	select SND_PCM
+	help
+	  Say 'Y' or 'M' to include support for Echoaudio Layla.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-layla20
+
+config SND_DARLA24
+	tristate "(Echoaudio) Darla24"
+	depends on SND
+	depends on FW_LOADER
+	select SND_PCM
+	help
+	  Say 'Y' or 'M' to include support for Echoaudio Darla24.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-darla24
+
+config SND_GINA24
+	tristate "(Echoaudio) Gina24"
+	depends on SND
+	depends on FW_LOADER
+	select SND_PCM
+	help
+	  Say 'Y' or 'M' to include support for Echoaudio Gina24.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-gina24
+
+config SND_LAYLA24
+	tristate "(Echoaudio) Layla24"
+	depends on SND
+	depends on FW_LOADER
+	select SND_RAWMIDI
+	select SND_PCM
+	help
+	  Say 'Y' or 'M' to include support for Echoaudio Layla24.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-layla24
+
+config SND_MONA
+	tristate "(Echoaudio) Mona"
+	depends on SND
+	depends on FW_LOADER
+	select SND_RAWMIDI
+	select SND_PCM
+	help
+	  Say 'Y' or 'M' to include support for Echoaudio Mona.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-mona
+
+config SND_MIA
+	tristate "(Echoaudio) Mia"
+	depends on SND
+	depends on FW_LOADER
+	select SND_RAWMIDI
+	select SND_PCM
+	help
+	  Say 'Y' or 'M' to include support for Echoaudio Mia and Mia-midi.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-mia
+
+config SND_ECHO3G
+	tristate "(Echoaudio) 3G cards"
+	depends on SND
+	depends on FW_LOADER
+	select SND_RAWMIDI
+	select SND_PCM
+	help
+	  Say 'Y' or 'M' to include support for Echoaudio Gina3G and Layla3G.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-echo3g
+
+config SND_INDIGO
+	tristate "(Echoaudio) Indigo"
+	depends on SND
+	depends on FW_LOADER
+	select SND_PCM
+	help
+	  Say 'Y' or 'M' to include support for Echoaudio Indigo.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-indigo
+
+config SND_INDIGOIO
+	tristate "(Echoaudio) Indigo IO"
+	depends on SND
+	depends on FW_LOADER
+	select SND_PCM
+	help
+	  Say 'Y' or 'M' to include support for Echoaudio Indigo IO.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-indigoio
+
+config SND_INDIGODJ
+	tristate "(Echoaudio) Indigo DJ"
+	depends on SND
+	depends on FW_LOADER
+	select SND_PCM
+	help
+	  Say 'Y' or 'M' to include support for Echoaudio Indigo DJ.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-indigodj
+
 config SND_EMU10K1
 	tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
 	depends on SND
diff --git a/sound/pci/Makefile b/sound/pci/Makefile
index cba5105aafea..e06736da9ef1 100644
--- a/sound/pci/Makefile
+++ b/sound/pci/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_SND) += \
 	ca0106/ \
 	cs46xx/ \
 	cs5535audio/ \
+	echoaudio/ \
 	emu10k1/ \
 	hda/ \
 	ice1712/ \
diff --git a/sound/pci/echoaudio/Makefile b/sound/pci/echoaudio/Makefile
new file mode 100644
index 000000000000..02ab0e5232b2
--- /dev/null
+++ b/sound/pci/echoaudio/Makefile
@@ -0,0 +1,17 @@
+#
+# Makefile for ALSA Echoaudio soundcard drivers
+# Copyright (c) 2003 by Giuliano Pochini <pochini@shiny.it>
+#
+
+snd-darla20-objs := darla20.o
+snd-gina20-objs := gina20.o
+snd-layla20-objs := layla20.o
+snd-darla24-objs := darla24.o
+snd-gina24-objs := gina24.o
+snd-layla24-objs := layla24.o
+snd-mona-objs := mona.o
+snd-mia-objs := mia.o
+snd-echo3g-objs := echo3g.o
+snd-indigo-objs := indigo.o
+snd-indigoio-objs := indigoio.o
+snd-indigodj-objs := indigodj.o
diff --git a/sound/pci/echoaudio/darla20.c b/sound/pci/echoaudio/darla20.c
new file mode 100644
index 000000000000..b7108e29a668
--- /dev/null
+++ b/sound/pci/echoaudio/darla20.c
@@ -0,0 +1,99 @@
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define ECHOGALS_FAMILY
+#define ECHOCARD_DARLA20
+#define ECHOCARD_NAME "Darla20"
+#define ECHOCARD_HAS_MONITOR
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0	/* 8 */
+#define PX_DIGITAL_OUT	8	/* 0 */
+#define PX_ANALOG_IN	8	/* 2 */
+#define PX_DIGITAL_IN	10	/* 0 */
+#define PX_NUM		10
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0	/* 8 */
+#define BX_DIGITAL_OUT	8	/* 0 */
+#define BX_ANALOG_IN	8	/* 2 */
+#define BX_DIGITAL_IN	10	/* 0 */
+#define BX_NUM		10
+
+
+#include <sound/driver.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include "echoaudio.h"
+
+#define FW_DARLA20_DSP	0
+
+static const struct firmware card_fw[] = {
+	{0, "darla20_dsp.fw"}
+};
+
+static struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x1801, 0xECC0, 0x0010, 0, 0, 0},	/* DSP 56301 Darla20 rev.0 */
+	{0,}
+};
+
+static struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
+	.rate_min = 44100,
+	.rate_max = 48000,
+	.channels_min = 1,
+	.channels_max = 2,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+	/* One page (4k) contains 512 instructions. I don't know if the hw
+	supports lists longer than this. In this case periods_max=220 is a
+	safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+
+#include "darla20_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
diff --git a/sound/pci/echoaudio/darla20_dsp.c b/sound/pci/echoaudio/darla20_dsp.c
new file mode 100644
index 000000000000..4159e3bc186f
--- /dev/null
+++ b/sound/pci/echoaudio/darla20_dsp.c
@@ -0,0 +1,125 @@
+/***************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	DE_INIT(("init_hw() - Darla20\n"));
+	snd_assert((subdevice_id & 0xfff0) == DARLA20, return -ENODEV);
+
+	if ((err = init_dsp_comm_page(chip))) {
+		DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = TRUE;
+	chip->dsp_code_to_load = &card_fw[FW_DARLA20_DSP];
+	chip->spdif_status = GD_SPDIF_STATUS_UNDEF;
+	chip->clock_state = GD_CLOCK_UNDEF;
+	/* Since this card has no ASIC, mark it as loaded so everything
+	   works OK */
+	chip->asic_loaded = TRUE;
+	chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL;
+
+	if ((err = load_firmware(chip)) < 0)
+		return err;
+	chip->bad_board = FALSE;
+
+	if ((err = init_line_levels(chip)) < 0)
+		return err;
+
+	DE_INIT(("init_hw done\n"));
+	return err;
+}
+
+
+
+/* The Darla20 has no external clock sources */
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	return ECHO_CLOCK_BIT_INTERNAL;
+}
+
+
+
+/* The Darla20 has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+	return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u8 clock_state, spdif_status;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	switch (rate) {
+	case 44100:
+		clock_state = GD_CLOCK_44;
+		spdif_status = GD_SPDIF_STATUS_44;
+		break;
+	case 48000:
+		clock_state = GD_CLOCK_48;
+		spdif_status = GD_SPDIF_STATUS_48;
+		break;
+	default:
+		clock_state = GD_CLOCK_NOCHANGE;
+		spdif_status = GD_SPDIF_STATUS_NOCHANGE;
+		break;
+	}
+
+	if (chip->clock_state == clock_state)
+		clock_state = GD_CLOCK_NOCHANGE;
+	if (spdif_status == chip->spdif_status)
+		spdif_status = GD_SPDIF_STATUS_NOCHANGE;
+
+	chip->comm_page->sample_rate = cpu_to_le32(rate);
+	chip->comm_page->gd_clock_state = clock_state;
+	chip->comm_page->gd_spdif_status = spdif_status;
+	chip->comm_page->gd_resampler_state = 3;	/* magic number - should always be 3 */
+
+	/* Save the new audio state if it changed */
+	if (clock_state != GD_CLOCK_NOCHANGE)
+		chip->clock_state = clock_state;
+	if (spdif_status != GD_SPDIF_STATUS_NOCHANGE)
+		chip->spdif_status = spdif_status;
+	chip->sample_rate = rate;
+
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_SET_GD_AUDIO_STATE);
+}
diff --git a/sound/pci/echoaudio/darla24.c b/sound/pci/echoaudio/darla24.c
new file mode 100644
index 000000000000..e59a982ee361
--- /dev/null
+++ b/sound/pci/echoaudio/darla24.c
@@ -0,0 +1,106 @@
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define ECHOGALS_FAMILY
+#define ECHOCARD_DARLA24
+#define ECHOCARD_NAME "Darla24"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0	/* 8 */
+#define PX_DIGITAL_OUT	8	/* 0 */
+#define PX_ANALOG_IN	8	/* 2 */
+#define PX_DIGITAL_IN	10	/* 0 */
+#define PX_NUM		10
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0	/* 8 */
+#define BX_DIGITAL_OUT	8	/* 0 */
+#define BX_ANALOG_IN	8	/* 2 */
+#define BX_DIGITAL_IN	10	/* 0 */
+#define BX_NUM		10
+
+
+#include <sound/driver.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include "echoaudio.h"
+
+#define FW_DARLA24_DSP	0
+
+static const struct firmware card_fw[] = {
+	{0, "darla24_dsp.fw"}
+};
+
+static struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x1801, 0xECC0, 0x0040, 0, 0, 0},	/* DSP 56301 Darla24 rev.0 */
+	{0x1057, 0x1801, 0xECC0, 0x0041, 0, 0, 0},	/* DSP 56301 Darla24 rev.1 */
+	{0,}
+};
+
+static struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates =	SNDRV_PCM_RATE_8000_48000 |
+			SNDRV_PCM_RATE_88200 |
+			SNDRV_PCM_RATE_96000,
+	.rate_min = 8000,
+	.rate_max = 96000,
+	.channels_min = 1,
+	.channels_max = 8,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+	/* One page (4k) contains 512 instructions. I don't know if the hw
+	supports lists longer than this. In this case periods_max=220 is a
+	safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+
+#include "darla24_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
diff --git a/sound/pci/echoaudio/darla24_dsp.c b/sound/pci/echoaudio/darla24_dsp.c
new file mode 100644
index 000000000000..79938eed7e9c
--- /dev/null
+++ b/sound/pci/echoaudio/darla24_dsp.c
@@ -0,0 +1,156 @@
+/***************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	DE_INIT(("init_hw() - Darla24\n"));
+	snd_assert((subdevice_id & 0xfff0) == DARLA24, return -ENODEV);
+
+	if ((err = init_dsp_comm_page(chip))) {
+		DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = TRUE;
+	chip->dsp_code_to_load = &card_fw[FW_DARLA24_DSP];
+	/* Since this card has no ASIC, mark it as loaded so everything
+	   works OK */
+	chip->asic_loaded = TRUE;
+	chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL |
+		ECHO_CLOCK_BIT_ESYNC;
+
+	if ((err = load_firmware(chip)) < 0)
+		return err;
+	chip->bad_board = FALSE;
+
+	if ((err = init_line_levels(chip)) < 0)
+		return err;
+
+	DE_INIT(("init_hw done\n"));
+	return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	u32 clocks_from_dsp, clock_bits;
+
+	/* Map the DSP clock detect bits to the generic driver clock
+	   detect bits */
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+	if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_ESYNC)
+		clock_bits |= ECHO_CLOCK_BIT_ESYNC;
+
+	return clock_bits;
+}
+
+
+
+/* The Darla24 has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+	return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u8 clock;
+
+	switch (rate) {
+	case 96000:
+		clock = GD24_96000;
+		break;
+	case 88200:
+		clock = GD24_88200;
+		break;
+	case 48000:
+		clock = GD24_48000;
+		break;
+	case 44100:
+		clock = GD24_44100;
+		break;
+	case 32000:
+		clock = GD24_32000;
+		break;
+	case 22050:
+		clock = GD24_22050;
+		break;
+	case 16000:
+		clock = GD24_16000;
+		break;
+	case 11025:
+		clock = GD24_11025;
+		break;
+	case 8000:
+		clock = GD24_8000;
+		break;
+	default:
+		DE_ACT(("set_sample_rate: Error, invalid sample rate %d\n",
+			rate));
+		return -EINVAL;
+	}
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	DE_ACT(("set_sample_rate: %d clock %d\n", rate, clock));
+	chip->sample_rate = rate;
+
+	/* Override the sample rate if this card is set to Echo sync. */
+	if (chip->input_clock == ECHO_CLOCK_ESYNC)
+		clock = GD24_EXT_SYNC;
+
+	chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP ? */
+	chip->comm_page->gd_clock_state = clock;
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_SET_GD_AUDIO_STATE);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+	snd_assert(clock == ECHO_CLOCK_INTERNAL ||
+		   clock == ECHO_CLOCK_ESYNC, return -EINVAL);
+	chip->input_clock = clock;
+	return set_sample_rate(chip, chip->sample_rate);
+}
+
diff --git a/sound/pci/echoaudio/echo3g.c b/sound/pci/echoaudio/echo3g.c
new file mode 100644
index 000000000000..12099fe1547d
--- /dev/null
+++ b/sound/pci/echoaudio/echo3g.c
@@ -0,0 +1,118 @@
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define ECHO3G_FAMILY
+#define ECHOCARD_ECHO3G
+#define ECHOCARD_NAME "Echo3G"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_ASIC
+#define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_DIGITAL_IO
+#define ECHOCARD_HAS_DIGITAL_MODE_SWITCH
+#define ECHOCARD_HAS_ADAT	6
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+#define ECHOCARD_HAS_MIDI
+#define ECHOCARD_HAS_PHANTOM_POWER