x86/xen: remove 32-bit Xen PV guest support

Xen is requiring 64-bit machines today and since Xen 4.14 it can be
built without 32-bit PV guest support. There is no need to carry the
burden of 32-bit PV guest support in the kernel any longer, as new
guests can be either HVM or PVH, or they can use a 64 bit kernel.

Remove the 32-bit Xen PV support from the kernel.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

18 files changed, 50 insertions, 840 deletions

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 2d0bd5d5f032..494d3224fa8a 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -449,8 +449,6 @@
 
 .macro SWITCH_TO_KERNEL_STACK
 
-	ALTERNATIVE     "", "jmp .Lend_\@", X86_FEATURE_XENPV
-
 	BUG_IF_WRONG_CR3
 
 	SWITCH_TO_KERNEL_CR3 scratch_reg=%eax
@@ -599,8 +597,6 @@
  */
 .macro SWITCH_TO_ENTRY_STACK
 
-	ALTERNATIVE     "", "jmp .Lend_\@", X86_FEATURE_XENPV
-
 	/* Bytes to copy */
 	movl	$PTREGS_SIZE, %ecx
 
@@ -872,17 +868,6 @@ SYM_ENTRY(__begin_SYSENTER_singlestep_region, SYM_L_GLOBAL, SYM_A_NONE)
  * will ignore all of the single-step traps generated in this range.
  */
 
-#ifdef CONFIG_XEN_PV
-/*
- * Xen doesn't set %esp to be precisely what the normal SYSENTER
- * entry point expects, so fix it up before using the normal path.
- */
-SYM_CODE_START(xen_sysenter_target)
-	addl	$5*4, %esp			/* remove xen-provided frame */
-	jmp	.Lsysenter_past_esp
-SYM_CODE_END(xen_sysenter_target)
-#endif
-
 /*
  * 32-bit SYSENTER entry.
  *
@@ -965,9 +950,8 @@ SYM_FUNC_START(entry_SYSENTER_32)
 
 	movl	%esp, %eax
 	call	do_SYSENTER_32
-	/* XEN PV guests always use IRET path */
-	ALTERNATIVE "testl %eax, %eax; jz .Lsyscall_32_done", \
-		    "jmp .Lsyscall_32_done", X86_FEATURE_XENPV
+	testl	%eax, %eax
+	jz	.Lsyscall_32_done
 
 	STACKLEAK_ERASE
 
@@ -1165,95 +1149,6 @@ SYM_FUNC_END(entry_INT80_32)
 #endif
 .endm
 
-#ifdef CONFIG_PARAVIRT
-SYM_CODE_START(native_iret)
-	iret
-	_ASM_EXTABLE(native_iret, asm_iret_error)
-SYM_CODE_END(native_iret)
-#endif
-
-#ifdef CONFIG_XEN_PV
-/*
- * See comment in entry_64.S for further explanation
- *
- * Note: This is not an actual IDT entry point. It's a XEN specific entry
- * point and therefore named to match the 64-bit trampoline counterpart.
- */
-SYM_FUNC_START(xen_asm_exc_xen_hypervisor_callback)
-	/*
-	 * Check to see if we got the event in the critical
-	 * region in xen_iret_direct, after we've reenabled
-	 * events and checked for pending events.  This simulates
-	 * iret instruction's behaviour where it delivers a
-	 * pending interrupt when enabling interrupts:
-	 */
-	cmpl	$xen_iret_start_crit, (%esp)
-	jb	1f
-	cmpl	$xen_iret_end_crit, (%esp)
-	jae	1f
-	call	xen_iret_crit_fixup
-1:
-	pushl	$-1				/* orig_ax = -1 => not a system call */
-	SAVE_ALL
-	ENCODE_FRAME_POINTER
-
-	mov	%esp, %eax
-	call	xen_pv_evtchn_do_upcall
-	jmp	handle_exception_return
-SYM_FUNC_END(xen_asm_exc_xen_hypervisor_callback)
-
-/*
- * Hypervisor uses this for application faults while it executes.
- * We get here for two reasons:
- *  1. Fault while reloading DS, ES, FS or GS
- *  2. Fault while executing IRET
- * Category 1 we fix up by reattempting the load, and zeroing the segment
- * register if the load fails.
- * Category 2 we fix up by jumping to do_iret_error. We cannot use the
- * normal Linux return path in this case because if we use the IRET hypercall
- * to pop the stack frame we end up in an infinite loop of failsafe callbacks.
- * We distinguish between categories by maintaining a status value in EAX.
- */
-SYM_FUNC_START(xen_failsafe_callback)
-	pushl	%eax
-	movl	$1, %eax
-1:	mov	4(%esp), %ds
-2:	mov	8(%esp), %es
-3:	mov	12(%esp), %fs
-4:	mov	16(%esp), %gs
-	/* EAX == 0 => Category 1 (Bad segment)
-	   EAX != 0 => Category 2 (Bad IRET) */
-	testl	%eax, %eax
-	popl	%eax
-	lea	16(%esp), %esp
-	jz	5f
-	jmp	asm_iret_error
-5:	pushl	$-1				/* orig_ax = -1 => not a system call */
-	SAVE_ALL
-	ENCODE_FRAME_POINTER
-	jmp	handle_exception_return
-
-.section .fixup, "ax"
-6:	xorl	%eax, %eax
-	movl	%eax, 4(%esp)
-	jmp	1b
-7:	xorl	%eax, %eax
-	movl	%eax, 8(%esp)
-	jmp	2b
-8:	xorl	%eax, %eax
-	movl	%eax, 12(%esp)
-	jmp	3b
-9:	xorl	%eax, %eax
-	movl	%eax, 16(%esp)
-	jmp	4b
-.previous
-	_ASM_EXTABLE(1b, 6b)
-	_ASM_EXTABLE(2b, 7b)
-	_ASM_EXTABLE(3b, 8b)
-	_ASM_EXTABLE(4b, 9b)
-SYM_FUNC_END(xen_failsafe_callback)
-#endif /* CONFIG_XEN_PV */
-
 SYM_CODE_START_LOCAL_NOALIGN(handle_exception)
 	/* the function address is in %gs's slot on the stack */
 	SAVE_ALL switch_stacks=1 skip_gs=1 unwind_espfix=1
diff --git a/arch/x86/entry/vdso/vdso32/note.S b/arch/x86/entry/vdso/vdso32/note.S
index e78047d119f6..2cbd39939dc6 100644
--- a/arch/x86/entry/vdso/vdso32/note.S
+++ b/arch/x86/entry/vdso/vdso32/note.S
@@ -16,33 +16,3 @@ ELFNOTE_START(Linux, 0, "a")
 ELFNOTE_END
 
 BUILD_SALT
-
-#ifdef CONFIG_XEN
-/*
- * Add a special note telling glibc's dynamic linker a fake hardware
- * flavor that it will use to choose the search path for libraries in the
- * same way it uses real hardware capabilities like "mmx".
- * We supply "nosegneg" as the fake capability, to indicate that we
- * do not like negative offsets in instructions using segment overrides,
- * since we implement those inefficiently.  This makes it possible to
- * install libraries optimized to avoid those access patterns in someplace
- * like /lib/i686/tls/nosegneg.  Note that an /etc/ld.so.conf.d/file
- * corresponding to the bits here is needed to make ldconfig work right.
- * It should contain:
- *	hwcap 1 nosegneg
- * to match the mapping of bit to name that we give here.
- *
- * At runtime, the fake hardware feature will be considered to be present
- * if its bit is set in the mask word.  So, we start with the mask 0, and
- * at boot time we set VDSO_NOTE_NONEGSEG_BIT if running under Xen.
- */
-
-#include "../../xen/vdso.h"	/* Defines VDSO_NOTE_NONEGSEG_BIT.  */
-
-ELFNOTE_START(GNU, 2, "a")
-	.long 1			/* ncaps */
-VDSO32_NOTE_MASK:		/* Symbol used by arch/x86/xen/setup.c */
-	.long 0			/* mask */
-	.byte VDSO_NOTE_NONEGSEG_BIT; .asciz "nosegneg"	/* bit, name */
-ELFNOTE_END
-#endif
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index 6e81788a30c1..28996fe19301 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -25,7 +25,7 @@ void entry_SYSENTER_compat(void);
 void __end_entry_SYSENTER_compat(void);
 void entry_SYSCALL_compat(void);
 void entry_INT80_compat(void);
-#if defined(CONFIG_X86_64) && defined(CONFIG_XEN_PV)
+#ifdef CONFIG_XEN_PV
 void xen_entry_INT80_compat(void);
 #endif
 #endif
diff --git a/arch/x86/include/asm/segment.h b/arch/x86/include/asm/segment.h
index 6669164abadc..9646c300f128 100644
--- a/arch/x86/include/asm/segment.h
+++ b/arch/x86/include/asm/segment.h
@@ -301,7 +301,7 @@ static inline void vdso_read_cpunode(unsigned *cpu, unsigned *node)
 extern const char early_idt_handler_array[NUM_EXCEPTION_VECTORS][EARLY_IDT_HANDLER_SIZE];
 extern void early_ignore_irq(void);
 
-#if defined(CONFIG_X86_64) && defined(CONFIG_XEN_PV)
+#ifdef CONFIG_XEN_PV
 extern const char xen_early_idt_handler_array[NUM_EXCEPTION_VECTORS][XEN_EARLY_IDT_HANDLER_SIZE];
 #endif
 
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index f66a6b90f954..7ed84c282233 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -134,38 +134,7 @@ SYM_CODE_START(startup_32)
 	movl %eax,pa(initial_page_table+0xffc)
 #endif
 
-#ifdef CONFIG_PARAVIRT
-	/* This is can only trip for a broken bootloader... */
-	cmpw $0x207, pa(boot_params + BP_version)
-	jb .Ldefault_entry
-
-	/* Paravirt-compatible boot parameters.  Look to see what architecture
-		we're booting under. */
-	movl pa(boot_params + BP_hardware_subarch), %eax
-	cmpl $num_subarch_entries, %eax
-	jae .Lbad_subarch
-
-	movl pa(subarch_entries)(,%eax,4), %eax
-	subl $__PAGE_OFFSET, %eax
-	jmp *%eax
-
-.Lbad_subarch:
-SYM_INNER_LABEL_ALIGN(xen_entry, SYM_L_WEAK)
-	/* Unknown implementation; there's really
-	   nothing we can do at this point. */
-	ud2a
-
-	__INITDATA
-
-subarch_entries:
-	.long .Ldefault_entry		/* normal x86/PC */
-	.long xen_entry			/* Xen hypervisor */
-	.long .Ldefault_entry		/* Moorestown MID */
-num_subarch_entries = (. - subarch_entries) / 4
-.previous
-#else
 	jmp .Ldefault_entry
-#endif /* CONFIG_PARAVIRT */
 SYM_CODE_END(startup_32)
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index 1aded63a95cb..218acbd5c7a0 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -19,6 +19,7 @@ config XEN_PV
 	bool "Xen PV guest support"
 	default y
 	depends on XEN
+	depends on X86_64
 	select PARAVIRT_XXL
 	select XEN_HAVE_PVMMU
 	select XEN_HAVE_VPMU
@@ -50,7 +51,7 @@ config XEN_PVHVM_SMP
 
 config XEN_512GB
 	bool "Limit Xen pv-domain memory to 512GB"
-	depends on XEN_PV && X86_64
+	depends on XEN_PV
 	default y
 	help
 	  Limit paravirtualized user domains to 512GB of RAM.
diff --git a/arch/x86/xen/apic.c b/arch/x86/xen/apic.c
index 5e53bfbe5823..ea6e9c54da9d 100644
--- a/arch/x86/xen/apic.c
+++ b/arch/x86/xen/apic.c
@@ -58,10 +58,6 @@ static u32 xen_apic_read(u32 reg)
 
 	if (reg == APIC_LVR)
 		return 0x14;
-#ifdef CONFIG_X86_32
-	if (reg == APIC_LDR)
-		return SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
-#endif
 	if (reg != APIC_ID)
 		return 0;
 
@@ -127,14 +123,6 @@ static int xen_phys_pkg_id(int initial_apic_id, int index_msb)
 	return initial_apic_id >> index_msb;
 }
 
-#ifdef CONFIG_X86_32
-static int xen_x86_32_early_logical_apicid(int cpu)
-{
-	/* Match with APIC_LDR read. Otherwise setup_local_APIC complains. */
-	return 1 << cpu;
-}
-#endif
-
 static void xen_noop(void)
 {
 }
@@ -197,11 +185,6 @@ static struct apic xen_pv_apic = {
 	.icr_write 			= xen_apic_icr_write,
 	.wait_icr_idle 			= xen_noop,
 	.safe_wait_icr_idle 		= xen_safe_apic_wait_icr_idle,
-
-#ifdef CONFIG_X86_32
-	/* generic_processor_info and setup_local_APIC. */
-	.x86_32_early_logical_apicid	= xen_x86_32_early_logical_apicid,
-#endif
 };
 
 static void __init xen_apic_check(void)
diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c
index c46b9f2e732f..2831f009ef78 100644
--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -119,14 +119,6 @@ static void __init xen_banner(void)
 	printk(KERN_INFO "Xen version: %d.%d%s%s\n",
 	       version >> 16, version & 0xffff, extra.extraversion,
 	       xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
-
-#ifdef CONFIG_X86_32
-	pr_warn("WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING!\n"
-		"Support for running as 32-bit PV-guest under Xen will soon be removed\n"
-		"from the Linux kernel!\n"
-		"Please use either a 64-bit kernel or switch to HVM or PVH mode!\n"
-		"WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING!\n");
-#endif
 }
 
 static void __init xen_pv_init_platform(void)
@@ -538,30 +530,12 @@ static void load_TLS_descriptor(struct thread_struct *t,
 static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
 {
 	/*
-	 * XXX sleazy hack: If we're being called in a lazy-cpu zone
-	 * and lazy gs handling is enabled, it means we're in a
-	 * context switch, and %gs has just been saved.  This means we
-	 * can zero it out to prevent faults on exit from the
-	 * hypervisor if the next process has no %gs.  Either way, it
-	 * has been saved, and the new value will get loaded properly.
-	 * This will go away as soon as Xen has been modified to not
-	 * save/restore %gs for normal hypercalls.
-	 *
-	 * On x86_64, this hack is not used for %gs, because gs points
-	 * to KERNEL_GS_BASE (and uses it for PDA references), so we
-	 * must not zero %gs on x86_64
-	 *
-	 * For x86_64, we need to zero %fs, otherwise we may get an
+	 * In lazy mode we need to zero %fs, otherwise we may get an
 	 * exception between the new %fs descriptor being loaded and
 	 * %fs being effectively cleared at __switch_to().
 	 */
-	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) {
-#ifdef CONFIG_X86_32
-		lazy_load_gs(0);
-#else
+	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU)
 		loadsegment(fs, 0);
-#endif
-	}
 
 	xen_mc_batch();
 
@@ -572,13 +546,11 @@ static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
 	xen_mc_issue(PARAVIRT_LAZY_CPU);
 }
 
-#ifdef CONFIG_X86_64
 static void xen_load_gs_index(unsigned int idx)
 {
 	if (HYPERVISOR_set_segment_base(SEGBASE_GS_USER_SEL, idx))
 		BUG();
 }
-#endif
 
 static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
 				const void *ptr)
@@ -597,7 +569,6 @@ static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
 	preempt_enable();
 }
 
-#ifdef CONFIG_X86_64
 void noist_exc_debug(struct pt_regs *regs);
 
 DEFINE_IDTENTRY_RAW(xenpv_exc_nmi)
@@ -697,7 +668,6 @@ static bool __ref get_trap_addr(void **addr, unsigned int ist)
 
 	return true;
 }
-#endif
 
 static int cvt_gate_to_trap(int vector, const gate_desc *val,
 			    struct trap_info *info)
@@ -710,10 +680,8 @@ static int cvt_gate_to_trap(int vector, const gate_desc *val,
 	info->vector = vector;
 
 	addr = gate_offset(val);
-#ifdef CONFIG_X86_64
 	if (!get_trap_addr((void **)&addr, val->bits.ist))
 		return 0;
-#endif	/* CONFIG_X86_64 */
 	info->address = addr;
 
 	info->cs = gate_segment(val);
@@ -958,15 +926,12 @@ static u64 xen_read_msr_safe(unsigned int msr, int *err)
 static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
 {
 	int ret;
-#ifdef CONFIG_X86_64
 	unsigned int which;
 	u64 base;
-#endif
 
 	ret = 0;
 
 	switch (msr) {
-#ifdef CONFIG_X86_64
 	case MSR_FS_BASE:		which = SEGBASE_FS; goto set;
 	case MSR_KERNEL_GS_BASE:	which = SEGBASE_GS_USER; goto set;
 	case MSR_GS_BASE:		which = SEGBASE_GS_KERNEL; goto set;
@@ -976,7 +941,6 @@ static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
 		if (HYPERVISOR_set_segment_base(which, base) != 0)
 			ret = -EIO;
 		break;
-#endif
 
 	case MSR_STAR:
 	case MSR_CSTAR:
@@ -1058,9 +1022,7 @@ void __init xen_setup_vcpu_info_placement(void)
 static const struct pv_info xen_info __initconst = {
 	.shared_kernel_pmd = 0,
 
-#ifdef CONFIG_X86_64
 	.extra_user_64bit_cs = FLAT_USER_CS64,
-#endif
 	.name = "Xen",
 };
 
@@ -1086,18 +1048,14 @@ static const struct pv_cpu_ops xen_cpu_ops __initconst = {
 	.read_pmc = xen_read_pmc,
 
 	.iret = xen_iret,
-#ifdef CONFIG_X86_64
 	.usergs_sysret64 = xen_sysret64,
-#endif
 
 	.load_tr_desc = paravirt_nop,
 	.set_ldt = xen_set_ldt,
 	.load_gdt = xen_load_gdt,
 	.load_idt = xen_load_idt,
 	.load_tls = xen_load_tls,
-#ifdef CONFIG_X86_64
 	.load_gs_index = xen_load_gs_index,
-#endif
 
 	.alloc_ldt = xen_alloc_ldt,
 	.free_ldt = xen_free_ldt,
@@ -1364,15 +1322,7 @@ asmlinkage __visible void __init xen_start_kernel(void)
 
 	/* keep using Xen gdt for now; no urgent need to change it */
 
-#ifdef CONFIG_X86_32
-	pv_info.kernel_rpl = 1;
-	if (xen_feature(XENFEAT_supervisor_mode_kernel))
-		pv_info.kernel_rpl = 0;
-#else
 	pv_info.kernel_rpl = 0;
-#endif
-	/* set the limit of our address space */
-	xen_reserve_top();
 
 	/*
 	 * We used to do this in xen_arch_setup, but that is too late
@@ -1384,12 +1334,6 @@ asmlinkage __visible void __init xen_start_kernel(void)
 	if (rc != 0)
 		xen_raw_printk("physdev_op failed %d\n", rc);
 
-#ifdef CONFIG_X86_32
-	/* set up basic CPUID stuff */
-	cpu_detect(&new_cpu_data);
-	set_cpu_cap(&new_cpu_data, X86_FEATURE_FPU);
-	new_cpu_data.x86_capability[CPUID_1_EDX] = cpuid_edx(1);
-#endif
 
 	if (xen_start_info->mod_start) {
 	    if (xen_start_info->flags & SIF_MOD_START_PFN)
@@ -1458,12 +1402,8 @@ asmlinkage __visible void __init xen_start_kernel(void)
 	xen_efi_init(&boot_params);
 
 	/* Start the world */
-#ifdef CONFIG_X86_32
-	i386_start_kernel();
-#else
 	cr4_init_shadow(); /* 32b kernel does this in i386_start_kernel() */
 	x86_64_start_reservations((char *)__pa_symbol(&boot_params));
-#endif
 }
 
 static int xen_cpu_up_prepare_pv(unsigned int cpu)
diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c
index a58d9c69807a..ff99e20a84e3 100644
--- a/arch/x86/xen/mmu_pv.c
+++ b/arch/x86/xen/mmu_pv.c
@@ -86,19 +86,8 @@
 #include "mmu.h"
 #include "debugfs.h"
 
-#ifdef CONFIG_X86_32
-/*
- * Identity map, in addition to plain kernel map.  This needs to be
- * large enough to allocate page table pages to allocate the rest.
- * Each page can map 2MB.
- */
-#define LEVEL1_IDENT_ENTRIES	(PTRS_PER_PTE * 4)
-static RESERVE_BRK_ARRAY(pte_t, level1_ident_pgt, LEVEL1_IDENT_ENTRIES);
-#endif
-#ifdef CONFIG_X86_64
 /* l3 pud for userspace vsyscall mapping */
 static pud_t level3_user_vsyscall[PTRS_PER_PUD] __page_aligned_bss;
-#endif /* CONFIG_X86_64 */
 
 /*
  * Protects atomic reservation decrease/increase against concurrent increases.
@@ -280,10 +269,7 @@ static inline void __xen_set_pte(pte_t *ptep, pte_t pteval)
 	if (!xen_batched_set_pte(ptep, pteval)) {
 		/*
 		 * Could call native_set_pte() here and trap and
-		 * emulate the PTE write but with 32-bit guests this
-		 * needs two traps (one for each of the two 32-bit
-		 * words in the PTE) so do one hypercall directly
-		 * instead.
+		 * emulate the PTE write, but a hypercall is much cheaper.
 		 */
 		struct mmu_update u;
 
@@ -439,26 +425,6 @@ static void xen_set_pud(pud_t *ptr, pud_t val)
 	xen_set_pud_hyper(ptr, val);
 }
 
-#ifdef CONFIG_X86_PAE
-static void xen_set_pte_atomic(pte_t *ptep, pte_t pte)
-{
-	trace_xen_mmu_set_pte_atomic(ptep, pte);
-	__xen_set_pte(ptep, pte);
-}
-
-static void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
-	trace_xen_mmu_pte_clear(mm, addr, ptep);
-	__xen_set_pte(ptep, native_make_pte(0));
-}
-
-static void xen_pmd_clear(pmd_t *pmdp)
-{
-	trace_xen_mmu_pmd_clear(pmdp);
-	set_pmd(pmdp, __pmd(0));
-}
-#endif	/* CONFIG_X86_PAE */
-
 __visible pmd_t xen_make_pmd(pmdval_t pmd)
 {
 	pmd = pte_pfn_to_mfn(pmd);
@@ -466,7 +432,6 @@ __visible pmd_t xen_make_pmd(pmdval_t pmd)
 }
 PV_CALLEE_SAVE_REGS_THUNK(xen_make_pmd);
 
-#ifdef CONFIG_X86_64
 __visible pudval_t xen_pud_val(pud_t pud)
 {
 	return pte_mfn_to_pfn(pud.pud);
@@ -571,7 +536,6 @@ __visible p4d_t xen_make_p4d(p4dval_t p4d)
 }
 PV_CALLEE_SAVE_REGS_THUNK(xen_make_p4d);
 #endif  /* CONFIG_PGTABLE_LEVELS >= 5 */
-#endif	/* CONFIG_X86_64 */
 
 static int xen_pmd_walk(struct mm_struct *mm, pmd_t *pmd,
 		int (*func)(struct mm_struct *mm, struct page *, enum pt_level),
@@ -636,11 +600,8 @@ static int xen_p4d_walk(struct mm_struct *mm, p4d_t *p4d,
  * will be STACK_TOP_MAX, but at boot we need to pin up to
  * FIXADDR_TOP.
  *
- * For 32-bit the important bit is that we don't pin beyond there,
- * because then we start getting into Xen's ptes.
- *
- * For 64-bit, we must skip the Xen hole in the middle of the address
- * space, just after the big x86-64 virtual hole.
+ * We must skip the Xen hole in the middle of the address space, just after
+ * the big x86-64 virtual hole.
  */
 static int __xen_pgd_walk(struct mm_struct *mm, pgd_t *pgd,
 			  int (*func)(struct mm_struct *mm, struct page *,
@@ -654,14 +615,12 @@ static int __xen_pgd_walk(struct mm_struct *mm, pgd_t *pgd,
 	limit--;
 	BUG_ON(limit >= FIXADDR_TOP);
 
-#ifdef CONFIG_X86_64
 	/*
 	 * 64-bit has a great big hole in the middle of the address
 	 * space, which contains the Xen mappings.
 	 */
 	hole_low = pgd_index(GUARD_HOLE_BASE_ADDR);
 	hole_high = pgd_index(GUARD_HOLE_END_ADDR);
-#endif
 
 	nr = pgd_index(limit) + 1;
 	for (i = 0; i < nr; i++) {
@@ -787,6 +746,8 @@ static int xen_pin_page(struct mm_struct *mm, struct page *page,
    read-only, and can be pinned. */
 static void __xen_pgd_pin(struct mm_struct *mm, pgd_t *pgd)
 {
+	pgd_t *user_pgd = xen_get_user_pgd(pgd);
+
 	trace_xen_mmu_pgd_pin(mm, pgd);
 
 	xen_mc_batch();
@@ -800,26 +761,14 @@ static void __xen_pgd_pin(struct mm_struct *mm, pgd_t *pgd)
 		xen_mc_batch();
 	}
 
-#ifdef CONFIG_X86_64
-	{
-		pgd_t *user_pgd = xen_get_user_pgd(pgd);
+	xen_do_pin(MMUEXT_PIN_L4_TABLE, PFN_DOWN(__pa(pgd)));
 
-		xen_do_pin(MMUEXT_PIN_L4_TABLE, PFN_DOWN(__pa(pgd)));
-
-		if (user_pgd) {
-			xen_pin_page(mm, virt_to_page(user_pgd), PT_PGD);
-			xen_do_pin(MMUEXT_PIN_L4_TABLE,
-				   PFN_DOWN(__pa(user_pgd)));
-		}
+	if (user_pgd) {
+		xen_pin_page(mm, virt_to_page(user_pgd), PT_PGD);
+		xen_do_pin(MMUEXT_PIN_L4_TABLE,
+			   PFN_DOWN(__pa(user_pgd)));
 	}
-#else /* CONFIG_X86_32 */
-#ifdef CONFIG_X86_PAE
-	/* Need to make sure unshared kernel PMD is pinnable */
-	xen_pin_page(mm, pgd_page(pgd[pgd_index(TASK_SIZE)]),
-		     PT_PMD);
-#endif
-	xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd)));
-#endif /* CONFIG_X86_64 */
+
 	xen_mc_issue(0);
 }
 
@@ -870,9 +819,7 @@ static int __init xen_mark_pinned(struct mm_struct *mm, struct page *page,
 static void __init xen_after_bootmem(void)
 {
 	static_branch_enable(&xen_struct_pages_ready);
-#ifdef CONFIG_X86_64
 	SetPagePinned(virt_to_page(level3_user_vsyscall));
-#endif
 	xen_pgd_walk(&init_mm, xen_mark_pinned, FIXADDR_TOP);
 }
 
@@ -919,29 +866,19 @@ static int xen_unpin_page(struct mm_struct *mm, struct page *page,
 /* Release a pagetables pages back as normal RW */
 static void __xen_pgd_unpin(struct mm_struct *mm, pgd_t *pgd)
 {
+	pgd_t *user_pgd = xen_get_user_pgd(pgd);
+
 	trace_xen_mmu_pgd_unpin(mm, pgd);
 
 	xen_mc_batch();
 
 	xen_do_pin(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
 
-#ifdef CONFIG_X86_64
-	{
-		pgd_t *user_pgd = xen_get_user_pgd(pgd);
-
-		if (user_pgd) {
-			xen_do_pin(MMUEXT_UNPIN_TABLE,
-				   PFN_DOWN(__pa(user_pgd)));
-			xen_unpin_page(mm, virt_to_page(user_pgd), PT_PGD);
-		}
+	if (user_pgd) {
+		xen_do_pin(MMUEXT_UNPIN_TABLE,
+			   PFN_DOWN(__pa(user_pgd)));
+		xen_unpin_page(mm, virt_to_page(user_pgd), PT_PGD);
 	}
-#endif
-
-#ifdef CONFIG_X86_PAE
-	/* Need to make sure unshared kernel PMD is unpinned */
-	xen_unpin_page(mm, pgd_page(pgd[pgd_index(TASK_SIZE)]),
-		       PT_PMD);
-#endif
 
 	__xen_pgd_walk(mm, pgd, xen_unpin_page, USER_LIMIT);
 
@@ -1089,7 +1026,6 @@ static void __init pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
 		BUG();
 }
 
-#ifdef CONFIG_X86_64
 static void __init xen_cleanhighmap(unsigned long vaddr,
 				    unsigned long vaddr_end)
 {
@@ -1273,17 +1209,15 @@ static void __init xen_pagetable_cleanhighmap(void)
 	xen_cleanhighmap(addr, roundup(addr + size, PMD_SIZE * 2));
 	xen_start_info->pt_base = (unsigned long)__va(__pa(xen_start_info->pt_base));
 }
-#endif
 
 static void __init xen_pagetable_p2m_setup(void)
 {
 	xen_vmalloc_p2m_tree();
 
-#ifdef CONFIG_X86_64
 	xen_pagetable_p2m_free();
 
 	xen_pagetable_cleanhighmap();
-#endif
+
 	/* And revector! Bye bye old array */
 	xen_start_info->mfn_list = (unsigned long)xen_p2m_addr;
 }
@@ -1420,6 +1354,8 @@ static void __xen_write_cr3(bool kernel, unsigned long cr3)
 }
 static void xen_write_cr3(unsigned long cr3)
 {
+	pgd_t *user_pgd = xen_get_user_pgd(__va(cr3));
+
 	BUG_ON(preemptible());
 
 	xen_mc_batch();  /* disables interrupts */
@@ -1430,20 +1366,14 @@ static void xen_write_cr3(unsigned long cr3)
 
 	__xen_write_cr3(true, cr3);
 
-#ifdef CONFIG_X86_64
-	{
-		pgd_t *user_pgd = xen_get_user_pgd(__va(cr3));
-		if (user_pgd)
-			__xen_write_cr3(false, __pa(user_pgd));
-		else
-			__xen_write_cr3(false, 0);
-	}
-#endif
+	if (user_pgd)
+		__xen_write_cr3(false, __pa(user_pgd));
+	else
+		__xen_write_cr3(false, 0);
 
 	xen_mc_issue(PARAVIRT_LAZY_CPU);  /* interrupts restored */
 }
 
-#ifdef CONFIG_X86_64
 /*
  * At the start of the day - when Xen launches a guest, it has already
  * built pagetables for the guest. We diligently look over them
@@ -1478,49 +1408,39 @@ static void __init xen_write_cr3_init(unsigned long cr3)
 
 	xen_mc_issue(PARAVIRT_LAZY_CPU);  /* interrupts restored */
 }
-#endif
 
 static int xen_pgd_alloc(struct mm_struct *mm)
 {
 	pgd_t *pgd = mm->pgd;
-	int ret = 0;
+	struct page *page = virt_to_page(pgd);
+	pgd_t *user_pgd;
+	int ret = -ENOMEM;
 
 	BUG_ON(PagePinned(virt_to_page(pgd)));
+	BUG_ON(page->private != 0);
 
-#ifdef CONFIG_X86_64
-	{
-		struct page *page = virt_to_page(pgd);
-		pgd_t *user_pgd;
-
-		BUG_ON(page->private != 0);
-
-		ret = -ENOMEM;
-
-		user_pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
-		page->private = (unsigned long)user_pgd;
+	user_pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+	page->private = (unsigned long)user_pgd;
 
-		if (user_pgd != NULL) {
+	if (user_pgd != NULL) {
 #ifdef CONFIG_X86_VSYSCALL_EMULATION
-			user_pgd[pgd_index(VSYSCALL_ADDR)] =
-				__pgd(__pa(level3_user_vsyscall) | _PAGE_TABLE);
+		user_pgd[pgd_index(VSYSCALL_ADDR)] =
+			__pgd(__pa(level3_user_vsyscall) | _PAGE_TABLE);
 #endif
-			ret = 0;
-		}
-
-		BUG_ON(PagePinned(virt_to_page(xen_get_user_pgd(pgd))));
+		ret = 0;
 	}
-#endif
+
+	BUG_ON(PagePinned(virt_to_page(xen_get_user_pgd(pgd))));
+
 	return ret;
 }
 
 static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
-#ifdef CONFIG_X86_64
 	pgd_t *user_pgd = xen_get_user_pgd(pgd);
 
 	if (user_pgd)
 		free_page((unsigned long)user_pgd);
-#endif
 }
 
 /*
@@ -1539,7 +1459,6 @@ static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
  */
 __visible pte_t xen_make_pte_init(pteval_t pte)
 {
-#ifdef CONFIG_X86_64
 	unsigned long pfn;
 
 	/*
@@ -1553,7 +1472,7 @@ __visible pte_t xen_make_pte_init(pteval_t pte)
 	    pfn >= xen_start_info->first_p2m_pfn &&
 	    pfn < xen_start_info->first_p2m_pfn + xen_start_info->nr_p2m_frames)
 		pte &= ~_PAGE_RW;
-#endif
+
 	pte = pte_pfn_to_mfn(pte);
 	return native_make_pte(pte);
 }
@@ -1561,13 +1480,6 @@ PV_CALLEE_SAVE_REGS_THUNK(xen_make_pte_init);
 
 static void __init xen_set_pte_init(pte_t *ptep, pte_t pte)
 {
-#ifdef CONFIG_X86_32
-	/* If there's an existing pte, then don't allow _PAGE_RW to be set */
-	if (pte_mfn(pte) != INVALID_P2M_ENTRY
-	    && pte_val_ma(*ptep) & _PAGE_PRESENT)
-		pte = __pte_ma(((pte_val_ma(*ptep) & _PAGE_RW) | ~_PAGE_RW) &
-			       pte_val_ma(pte));
-#endif
 	__xen_set_pte(ptep, pte);
 }
 
@@ -1702,7 +1614,6 @@ static void xen_release_pmd(unsigned long pfn)
 	xen_release_ptpage(pfn, PT_PMD);
 }
 
-#ifdef CONFIG_X86_64
 static void xen_alloc_pud(struct mm_struct *mm, unsigned long pfn)
 {
 	xen_alloc_ptpage(mm, pfn, PT_PUD);
@@ -1712,20 +1623,6 @@ static void xen_release_pud(unsigned long pfn)
 {
 	xen_release_ptpage(pfn, PT_PUD);
 }
-#endif
-
-void __init xen_reserve_top(void)
-{
-#ifdef CONFIG_X86_32
-	unsigned long top = HYPERVISOR_VIRT_START;
-	struct xen_platform_parameters pp;
-
-	if (HYPERVISOR_xen_version(XENVER_platform_parameters, &pp) == 0)
-		top = pp.virt_start;
-
-	reserve_top_address(-top);
-#endif	/* CONFIG_X86_32 */
-}
 
 /*
  * Like __va(), but returns address in the kernel mapping (which is
@@ -1733,11 +1630,7 @@ void __init xen_reserve_top(void)
  */
 static void * __init __ka(phys_addr_t paddr)
 {
-#ifdef CONFIG_X86_64
 	return (void *)(paddr + __START_KERNEL_map);
-#else
-	return __va(paddr);
-#endif
 }
 
 /* Convert a machine address to physical address */
@@ -1771,56 +1664,7 @@ static void __init set_page_prot(void *addr, pgprot_t prot)
 {
 	return set_page_prot_flags(addr, prot, UVMF_NONE);
 }
-#ifdef CONFIG_X86_32
-static void __init xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
-{
-	unsigned pmdidx, pteidx;
-	unsigned ident_pte;
-	unsigned long pfn;
-
-	level1_ident_pgt = extend_brk(sizeof(pte_t) * LEVEL1_IDENT_ENTRIES,
-				      PAGE_SIZE);
-
-	ident_pte = 0;
-	pfn = 0;
-	for (pmdidx = 0; pmdidx < PTRS_PER_PMD && pfn < max_pfn; pmdidx++) {
-		pte_t *pte_page;
-
-		/* Reuse or allocate a page of ptes */
-		if (pmd_present(pmd[pmdidx]))
-			pte_page = m2v(pmd[pmdidx].pmd);
-		else {
-			/* Check for free pte pages */
-			if (ident_pte == LEVEL1_IDENT_ENTRIES)
-				break;
-
-			pte_page = &level1_ident_pgt[ident_pte];
-			ident_pte += PTRS_PER_PTE;
-
-			pmd[pmdidx] = __pmd(__pa(pte_page) | _PAGE_TABLE);
-		}
-
-		/* Install mappings */
-		for (pteidx = 0; pteidx < PTRS_PER_PTE; pteidx++, pfn++) {
-			pte_t pte;
-
-			if (pfn > max_pfn_mapped)
-				max_pfn_mapped = pfn;
-
-			if (!pte_none(pte_page[pteidx]))
-				continue;
-
-			pte = pfn_pte(pfn, PAGE_KERNEL_EXEC);
-			pte_page[pteidx] = pte;
-		}
-	}
 
-	for (pteidx = 0; pteidx < ident_pte; pteidx += PTRS_PER_PTE)
-		set_page_prot(&level1_ident_pgt[pteidx], PAGE_KERNEL_RO);
-
-	set_page_prot(pmd, PAGE_KERNEL_RO);
-}
-#endif
 void __init xen_setup_machphys_mapping(void)
 {
 	struct xen_machphys_mapping mapping;
@@ -1831,13 +1675,8 @@ void __init xen_setup_machphys_mapping(void)
 	} else {
 		machine_to_phys_nr = MACH2PHYS_NR_ENTRIES;
 	}
-#ifdef CONFIG_X86_32
-	WARN_ON((machine_to_phys_mapping + (machine_to_phys_nr - 1))
-		< machine_to_phys_mapping);
-#endif
 }
 
-#ifdef CONFIG_X86_64
 static void __init convert_pfn_mfn(void *v)
 {
 	pte_t *pte = v;
@@ -2168,105 +2007,6 @@ void __init xen_relocate_p2m(void)
 	xen_start_info->nr_p2m_frames = n_frames;
 }
 
-#else	/* !CONFIG_X86_64 */
-static RESERVE_BRK_ARRAY(pmd_t, initial_kernel_pmd, PTRS_PER_PMD);
-static RESERVE_BRK_ARRAY(pmd_t, swapper_kernel_pmd, PTRS_PER_PMD);
-RESERVE_BRK(fixup_kernel_pmd, PAGE_SIZE);
-RESERVE_BRK(fixup_kernel_pte, PAGE_SIZE);
-
-static void __init xen_write_cr3_init(unsigned long cr3)
-{
-	unsigned long pfn = PFN_DOWN(__pa(swapper_pg_dir));
-
-	BUG_ON(read_cr3_pa() != __pa(initial_page_table));
-	BUG_ON(cr3 != __pa(swapper_pg_dir));
-
-	/*
-	 * We are switching to swapper_pg_dir for the first time (from
-	 * initial_page_table) and therefore need to mark that page
-	 * read-only and then pin it.
-	 *
-	 * Xen disallows sharing of kernel PMDs for PAE
-	 * guests. Therefore we must copy the kernel PM