Merge tag 'linux-watchdog-5.2-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - a new watchdog driver for the ROHM BD70528 watchdog block

 - a new watchdog driver for the i.MX system controller watchdog

 - conversions to use device managed functions and other improvements

 - refactor watchdog_init_timeout

 - make watchdog core configurable as module

 - pretimeout governors improvements

 - a lot of other fixes

* tag 'linux-watchdog-5.2-rc1' of git://www.linux-watchdog.org/linux-watchdog: (114 commits)
  watchdog: Enforce that at least one pretimeout governor is enabled
  watchdog: stm32: add dynamic prescaler support
  watchdog: Improve Kconfig entry ordering and dependencies
  watchdog: npcm: Enable modular builds
  watchdog: Make watchdog core configurable as module
  watchdog: Move pretimeout governor configuration up
  watchdog: Use depends instead of select for pretimeout governors
  watchdog: rtd119x: drop unused module.h include
  watchdog: intel_scu: make it explicitly non-modular
  watchdog: coh901327: make it explicitly non-modular
  watchdog: ziirave_wdt: drop warning after calling watchdog_init_timeout
  watchdog: xen_wdt: drop warning after calling watchdog_init_timeout
  watchdog: stm32_iwdg: drop warning after calling watchdog_init_timeout
  watchdog: st_lpc_wdt: drop warning after calling watchdog_init_timeout
  watchdog: sp5100_tco: drop warning after calling watchdog_init_timeout
  watchdog: renesas_wdt: drop warning after calling watchdog_init_timeout
  watchdog: nic7018_wdt: drop warning after calling watchdog_init_timeout
  watchdog: ni903x_wdt: drop warning after calling watchdog_init_timeout
  watchdog: imx_sc_wdt: drop warning after calling watchdog_init_timeout
  watchdog: i6300esb: drop warning after calling watchdog_init_timeout
  ...

99 files changed, 1490 insertions, 1537 deletions

diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt
new file mode 100644
index 000000000000..02b87e92ae68
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt
@@ -0,0 +1,24 @@
+* Freescale i.MX System Controller Watchdog
+
+i.MX system controller watchdog is for i.MX SoCs with system controller inside,
+the watchdog is managed by system controller, users can ONLY communicate with
+system controller from secure mode for watchdog operations, so Linux i.MX system
+controller watchdog driver will call ARM SMC API and trap into ARM-Trusted-Firmware
+for watchdog operations, ARM-Trusted-Firmware is running at secure EL3 mode and
+it will request system controller to execute the watchdog operation passed from
+Linux kernel.
+
+Required properties:
+- compatible:	Should be :
+		"fsl,imx8qxp-sc-wdt"
+		followed by "fsl,imx-sc-wdt";
+
+Optional properties:
+- timeout-sec : Contains the watchdog timeout in seconds.
+
+Examples:
+
+watchdog {
+	compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+	timeout-sec = <60>;
+};
diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index 8682d6a93e5b..fd380eb28df5 100644
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
@@ -9,6 +9,7 @@ Required properties:
 	"mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622
 	"mediatek,mt7623-wdt", "mediatek,mt6589-wdt": for MT7623
 	"mediatek,mt7629-wdt", "mediatek,mt6589-wdt": for MT7629
+	"mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516
 
 - reg : Specifies base physical address and size of the registers.
 
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 242eea859637..7ea60371bda0 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -30,7 +30,7 @@ menuconfig WATCHDOG
 if WATCHDOG
 
 config WATCHDOG_CORE
-	bool "WatchDog Timer Driver Core"
+	tristate "WatchDog Timer Driver Core"
 	---help---
 	  Say Y here if you want to use the new watchdog timer driver core.
 	  This driver provides a framework for all watchdog timer drivers
@@ -63,6 +63,66 @@ config WATCHDOG_SYSFS
 	  Say Y here if you want to enable watchdog device status read through
 	  sysfs attributes.
 
+comment "Watchdog Pretimeout Governors"
+
+config WATCHDOG_PRETIMEOUT_GOV
+	bool "Enable watchdog pretimeout governors"
+	depends on WATCHDOG_CORE
+	help
+	  The option allows to select watchdog pretimeout governors.
+
+config WATCHDOG_PRETIMEOUT_GOV_SEL
+	tristate
+	depends on WATCHDOG_PRETIMEOUT_GOV
+	default m
+	select WATCHDOG_PRETIMEOUT_GOV_PANIC if WATCHDOG_PRETIMEOUT_GOV_NOOP=n
+
+if WATCHDOG_PRETIMEOUT_GOV
+
+config WATCHDOG_PRETIMEOUT_GOV_NOOP
+	tristate "Noop watchdog pretimeout governor"
+	depends on WATCHDOG_CORE
+	default WATCHDOG_CORE
+	help
+	  Noop watchdog pretimeout governor, only an informational
+	  message is added to kernel log buffer.
+
+config WATCHDOG_PRETIMEOUT_GOV_PANIC
+	tristate "Panic watchdog pretimeout governor"
+	depends on WATCHDOG_CORE
+	default WATCHDOG_CORE
+	help
+	  Panic watchdog pretimeout governor, on watchdog pretimeout
+	  event put the kernel into panic.
+
+choice
+	prompt "Default Watchdog Pretimeout Governor"
+	default WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC
+	help
+	  This option selects a default watchdog pretimeout governor.
+	  The governor takes its action, if a watchdog is capable
+	  to report a pretimeout event.
+
+config WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP
+	bool "noop"
+	depends on WATCHDOG_PRETIMEOUT_GOV_NOOP
+	help
+	  Use noop watchdog pretimeout governor by default. If noop
+	  governor is selected by a user, write a short message to
+	  the kernel log buffer and don't do any system changes.
+
+config WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC
+	bool "panic"
+	depends on WATCHDOG_PRETIMEOUT_GOV_PANIC
+	help
+	  Use panic watchdog pretimeout governor by default, if
+	  a watchdog pretimeout event happens, consider that
+	  a watchdog feeder is dead and reboot is unavoidable.
+
+endchoice
+
+endif # WATCHDOG_PRETIMEOUT_GOV
+
 #
 # General Watchdog drivers
 #
@@ -90,6 +150,18 @@ config SOFT_WATCHDOG_PRETIMEOUT
 	  watchdog. Be aware that governors might affect the watchdog because it
 	  is purely software, e.g. the panic governor will stall it!
 
+config BD70528_WATCHDOG
+	tristate "ROHM BD70528 PMIC Watchdog"
+	depends on MFD_ROHM_BD70528
+	select WATCHDOG_CORE
+	help
+	  Support for the watchdog in the ROHM BD70528 PMIC. Watchdog trigger
+	  cause system reset.
+
+	  Say Y here to include support for the ROHM BD70528 watchdog.
+	  Alternatively say M to compile the driver as a module,
+	  which will be called bd70528_wdt.
+
 config DA9052_WATCHDOG
 	tristate "Dialog DA9052 Watchdog"
 	depends on PMIC_DA9052 || COMPILE_TEST
@@ -552,7 +624,7 @@ config COH901327_WATCHDOG
 	  compiled as a module.
 
 config NPCM7XX_WATCHDOG
-	bool "Nuvoton NPCM750 watchdog"
+	tristate "Nuvoton NPCM750 watchdog"
 	depends on ARCH_NPCM || COMPILE_TEST
 	default y if ARCH_NPCM7XX
 	select WATCHDOG_CORE
@@ -641,6 +713,22 @@ config IMX2_WDT
 	  To compile this driver as a module, choose M here: the
 	  module will be called imx2_wdt.
 
+config IMX_SC_WDT
+	tristate "IMX SC Watchdog"
+	depends on HAVE_ARM_SMCCC
+	select WATCHDOG_CORE
+	help
+	  This is the driver for the system controller watchdog
+	  on the NXP i.MX SoCs with system controller inside, the
+	  watchdog driver will call ARM SMC API and trap into
+	  ARM-Trusted-Firmware for operations, ARM-Trusted-Firmware
+	  will request system controller to execute the operations.
+	  If you have one of these processors and wish to have
+	  watchdog support enabled, say Y, otherwise say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called imx_sc_wdt.
+
 config UX500_WATCHDOG
 	tristate "ST-Ericsson Ux500 watchdog"
 	depends on MFD_DB8500_PRCMU
@@ -1179,6 +1267,15 @@ config HP_WATCHDOG
 	  To compile this driver as a module, choose M here: the module will be
 	  called hpwdt.
 
+config HPWDT_NMI_DECODING
+	bool "NMI support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
+	depends on HP_WATCHDOG
+	default y
+	help
+	  Enables the NMI handler for the watchdog pretimeout NMI and the iLO
+	  "Generate NMI to System" virtual button.  When an NMI is claimed
+	  by the driver, panic is called.
+
 config KEMPLD_WDT
 	tristate "Kontron COM Watchdog Timer"
 	depends on MFD_KEMPLD
@@ -1190,15 +1287,6 @@ config KEMPLD_WDT
 	  This driver can also be built as a module. If so, the module will be
 	  called kempld_wdt.
 
-config HPWDT_NMI_DECODING
-	bool "NMI support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
-	depends on HP_WATCHDOG
-	default y
-	help
-	  Enables the NMI handler for the watchdog pretimeout NMI and the iLO
-	  "Generate NMI to System" virtual button.  When an NMI is claimed
-	  by the driver, panic is called.
-
 config SC1200_WDT
 	tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
 	depends on X86
@@ -1647,7 +1735,7 @@ config BCM_KONA_WDT
 
 config BCM_KONA_WDT_DEBUG
 	bool "DEBUGFS support for BCM Kona Watchdog"
-	depends on BCM_KONA_WDT || COMPILE_TEST
+	depends on BCM_KONA_WDT
 	help
 	  If enabled, adds /sys/kernel/debug/bcm_kona_wdt/info which provides
 	  access to the driver's internal data structures as well as watchdog
@@ -2024,53 +2112,4 @@ config USBPCWATCHDOG
 
 	  Most people will say N.
 
-comment "Watchdog Pretimeout Governors"
-
-config WATCHDOG_PRETIMEOUT_GOV
-	bool "Enable watchdog pretimeout governors"
-	help
-	  The option allows to select watchdog pretimeout governors.
-
-if WATCHDOG_PRETIMEOUT_GOV
-
-choice
-	prompt "Default Watchdog Pretimeout Governor"
-	default WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC
-	help
-	  This option selects a default watchdog pretimeout governor.
-	  The governor takes its action, if a watchdog is capable
-	  to report a pretimeout event.
-
-config WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP
-	bool "noop"
-	select WATCHDOG_PRETIMEOUT_GOV_NOOP
-	help
-	  Use noop watchdog pretimeout governor by default. If noop
-	  governor is selected by a user, write a short message to
-	  the kernel log buffer and don't do any system changes.
-
-config WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC
-	bool "panic"
-	select WATCHDOG_PRETIMEOUT_GOV_PANIC
-	help
-	  Use panic watchdog pretimeout governor by default, if
-	  a watchdog pretimeout event happens, consider that
-	  a watchdog feeder is dead and reboot is unavoidable.
-
-endchoice
-
-config WATCHDOG_PRETIMEOUT_GOV_NOOP
-	tristate "Noop watchdog pretimeout governor"
-	help
-	  Noop watchdog pretimeout governor, only an informational
-	  message is added to kernel log buffer.
-
-config WATCHDOG_PRETIMEOUT_GOV_PANIC
-	tristate "Panic watchdog pretimeout governor"
-	help
-	  Panic watchdog pretimeout governor, on watchdog pretimeout
-	  event put the kernel into panic.
-
-endif # WATCHDOG_PRETIMEOUT_GOV
-
 endif # WATCHDOG
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index ba930e464657..7caa920e7e60 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
 obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o
 obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
 obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
+obj-$(CONFIG_IMX_SC_WDT) += imx_sc_wdt.o
 obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
 obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
 obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
@@ -205,6 +206,7 @@ obj-$(CONFIG_WATCHDOG_SUN4V)		+= sun4v_wdt.o
 obj-$(CONFIG_XEN_WDT) += xen_wdt.o
 
 # Architecture Independent
+obj-$(CONFIG_BD70528_WATCHDOG) += bd70528_wdt.o
 obj-$(CONFIG_DA9052_WATCHDOG)