diff options
author | QC <qball@gmpclient.org> | 2015-09-04 21:08:23 +0200 |
---|---|---|
committer | QC <qball@gmpclient.org> | 2015-09-04 21:08:23 +0200 |
commit | e10aa09f748fc927327479eafea67e25cc592076 (patch) | |
tree | 7e0d75aea48570871196e555b1cd1894c84cc073 /doc/rofi.1 | |
parent | 465d027c1e46814ae3e1a72eb56ec90e4332f825 (diff) |
Add hide scrollbar option.
Diffstat (limited to 'doc/rofi.1')
-rw-r--r-- | doc/rofi.1 | 415 |
1 files changed, 151 insertions, 264 deletions
@@ -1,7 +1,7 @@ .\" generated with Ronn/v0.7.3 .\" http://github.com/rtomayko/ronn/tree/0.7.3 . -.TH "ROFI\-MANPAGE" "" "August 2015" "" "" +.TH "ROFI\-MANPAGE" "" "September 2015" "" "" . .SH "NAME" \fBrofi\fR \- A window switcher, run launcher, ssh dialog and dmenu replacement @@ -16,26 +16,26 @@ \fBrofi\fR can be used in three ways, single\-shot; executes once and directly exits when done, as a daemon listening to specific key\-combination or emulating dmenu\. . .SS "Single\-shot mode" -To launch \fBrofi\fR directly in a certain mode, specifying \fBrofi \-show <mode>\fR\. To show the run dialog: +To launch \fBrofi\fR directly in a certain mode, specify a mode with \fBrofi \-show <mode>\fR\. To show the run dialog: . .IP "" 4 . .nf - rofi \-show run +rofi \-show run . .fi . .IP "" 0 . .SS "Daemon mode" -To launch \fBrofi\fR in daemon mode don\'t specify a mode to show (\fB\-show <mode>\fR), instead you can bind keys to launch a certain mode\. To have run mode open when pressing \fBF2\fR start \fBrofi\fR like: +To launch \fBrofi\fR in daemon mode don\'t specify any mode, instead keys can be bound to launch a certain mode\. To show run\-mode by pressing \fBF2\fR start \fBrofi\fR like this: . .IP "" 4 . .nf - rofi \-key\-run F2 +rofi \-key\-run F2 . .fi . @@ -65,26 +65,26 @@ Command\-line options: Arguments passed to \fBrofi\fR\. .IP "" 0 . .P -The Xresources options and the command\-line options are aliased\. So to set option X you would set: +The Xresources file expects options starting with \fBrofi\.\fR followed by it\'s name\. An Example to set the number of lines: . .IP "" 4 . .nf -rofi\.X: value +rofi\.lines: 10 . .fi . .IP "" 0 . .P -In the Xresources file, and to (override) this via the command\-line you would pass the same key prefixed with a \'\-\': +Command line options override settings from Xresources file\. The same option set as argument: prefixed with a \'\-\': . .IP "" 4 . .nf -rofi \-X value +rofi \-lines 10 . .fi . @@ -121,7 +121,7 @@ Boolean .IP "" 0 . .P -The boolean option has a non\-default command\-line syntax, to enable option X you do: +Boolean options have a non\-default command\-line syntax\. Example to enable option X: . .IP "" 4 . @@ -159,9 +159,9 @@ Set the key combination to display a {mode} in daemon mode\. . .nf - rofi \-key\-run F12 - rofi \-key\-ssh control+shift+s - rofi \-key\-window mod1+Tab +rofi \-key\-run F12 +rofi \-key\-ssh control+shift+s +rofi \-key\-window mod1+Tab . .fi . @@ -171,19 +171,13 @@ Set the key combination to display a {mode} in daemon mode\. \fB\-dmenu\fR . .P -Run \fBrofi\fR in dmenu mode\. Allowing it to be used for user interaction in scripts\. -. -.P -In \fBdmenu\fR mode, \fBrofi\fR will read input from STDIN, and will output to STDOUT by default\. -. -.P -Example to let the user choose between three pre\-defined options: +Run \fBrofi\fR in dmenu mode\. This allows for interactive scripts\. In \fBdmenu\fR mode, \fBrofi\fR reads from STDIN, and output to STDOUT\. A simple example, displaying 3 pre\-defined options: . .IP "" 4 . .nf - echo \-e "Option #1\enOption #2\enOption #3" | rofi \-dmenu +echo \-e "Option #1\enOption #2\enOption #3" | rofi \-dmenu . .fi . @@ -196,51 +190,42 @@ Or get the options from a script: . .nf - ~/my_script\.sh | rofi \-dmenu +~/my_script\.sh | rofi \-dmenu . .fi . .IP "" 0 . .P -Pressing \fBshift\-enter\fR will open the selected entries and move to the next entry\. +Pressing \fBshift\-enter\fR sends the selected entry to STDOUT and moves to the next entry\. . .P \fB\-show\fR \fImode\fR . .P -Open \fBrofi\fR in a certain mode\. -. -.P -For example to show the run\-dialog: +Open \fBrofi\fR in a certain mode\. Available modes are \fBwindow\fR, \fBrun\fR, \fBssh\fR To show the run\-dialog: . .IP "" 4 . .nf - rofi \-show run +rofi \-show run . .fi . .IP "" 0 . .P -This function deprecates \-rnow,\-snow and \-now -. -.P -\fB\-switchers\fR \fImode1,mode1\fR \fB\-modi\fR \fImode1,mode1\fR -. -.P -Give a comma separated list of modes to enable, in what order\. +\fB\-modi\fR \fImode1,mode1\fR . .P -For example to only show the run and ssh launcher (in that order): +Specify a ordered, comma separated list of modes to enable\. Enabled modes can be changed at runtime\. Default key is Ctrl+Tab\. If no modes are specified all modes will be enabled\. To only show the run and ssh launcher: . .IP "" 4 . .nf - rofi \-modi "run,ssh" \-show run +rofi \-modi "run,ssh" \-show run . .fi . @@ -253,20 +238,20 @@ Custom modes can be added using the internal \'script\' mode\. Each mode has two . .nf - <name>:<script> +<name>:<script> . .fi . .IP "" 0 . .P -So to have a mode \'Workspaces\' using the \fBi3_switch_workspace\.sh\fR script type: +Example: Have a mode \'Workspaces\' using the \fBi3_switch_workspace\.sh\fR script: . .IP "" 4 . .nf - rofi \-modi "window,run,ssh,Workspaces:i3_switch_workspaces\.sh" \-show Workspaces +rofi \-modi "window,run,ssh,Workspaces:i3_switch_workspaces\.sh" \-show Workspaces . .fi . @@ -287,31 +272,17 @@ Do not print any message when starting in daemon mode\. .P \fB\-fuzzy\fR . -.IP "" 4 -. -.nf - +.P Enable experimental fuzzy matching\. . -.fi -. -.IP "" 0 -. .P \fB\-filter\fR \fIfilter\fR . -.IP "" 4 -. -.nf - -Preset user filter to *filter* in the entry box and pre\-filter the list\. -. -.fi -. -.IP "" 0 +.P +Filter the list by setting text in input bar to \fIfilter\fR . .SS "Theming" -\fB\-bg\fR +All colors are either hex #rrggbb values or X11 color names\. \fB\-bg\fR . .P \fB\-bg\-active\fR @@ -320,13 +291,13 @@ Preset user filter to *filter* in the entry box and pre\-filter the list\. \fB\-bg\-urgent\fR . .P -Set the background text color (X11 named color or hex #rrggbb) for the menu\. +Set background color in menu\. . .IP "" 4 . .nf - rofi \-bg "#222222" +rofi \-bg "#222222" . .fi . @@ -339,13 +310,13 @@ Default: \fI#f2f1f0\fR \fB\-bgalt\fR . .P -Set the background text color for alternating rows (X11 named color or hex #rrggbb) for the menu\. +Set background color for alternating rows in menu\. . .IP "" 4 . .nf - rofi \-bgalt "#222222" +rofi \-bgalt "#222222" . .fi . @@ -358,13 +329,13 @@ Default: \fI#f2f1f0\fR \fB\-bc\fR . .P -Set the border color (X11 named color or hex #rrggbb) for the menu\. +Set border color for menu\. . .IP "" 4 . .nf - rofi \-bc black +rofi \-bc black . .fi . @@ -377,13 +348,13 @@ Default: \fIblack\fR \fB\-bw\fR . .P -Set the border width in pixels\. +Set border width in pixels\. . .IP "" 4 . .nf - rofi \-bw 1 +rofi \-bw 1 . .fi . @@ -402,13 +373,13 @@ Default: \fI1\fR \fB\-fg\-active\fR . .P -Set the foreground text color (X11 named color or hex #rrggbb) for the menu\. +Set foreground text color for the menu\. . .IP "" 4 . .nf - rofi \-fg "#cccccc" +rofi \-fg "#cccccc" . .fi . @@ -427,13 +398,13 @@ Default: \fI#222222\fR \fB\-hlbg\-urgent\fR . .P -Set the background text color (X11 named color or hex #rrggbb) for the highlighted item in the menu\. +Set background color for the highlighted item in the menu\. . .IP "" 4 . .nf - rofi \-hlbg "#005577" +rofi \-hlbg "#005577" . .fi . @@ -452,13 +423,13 @@ Default: \fI#005577\fR \fB\-hlfg\-urgent\fR . .P -Set the foreground text color (X11 named color or hex #rrggbb) for the highlighted item in the menu\. +Set foreground text color for the highlighted item in the menu\. . .IP "" 4 . .nf - rofi \-hlfg "#ffffff" +rofi \-hlfg "#ffffff" . .fi . @@ -471,13 +442,13 @@ Default: \fI#FFFFFF\fR \fB\-font\fR . .P -Pango font name for use by the menu\. +Specify a font\. Pango syntax is used\. . .IP "" 4 . .nf - rofi \-font monospace\e 14 +rofi \-font "Dejavu Sans Mono 14" . .fi . @@ -490,13 +461,13 @@ Default: \fImono 12\fR \fB\-opacity\fR . .P -Set the window opacity (0\-100)\. +Set window opacity (0\-100)\. . .IP "" 4 . .nf - rofi \-opacity "75" +rofi \-opacity "75" . .fi . @@ -515,7 +486,7 @@ The height of a field in lines\. e\.g\. . .nf - echo \-e "a\en3|b\en4|c\en5" | rofi \-sep \'|\' \-eh 2 \-dmenu +echo \-e "a\en3|b\en4|c\en5" | rofi \-sep \'|\' \-eh 2 \-dmenu . .fi . @@ -530,29 +501,15 @@ The following options are further explained in the theming section: .P \fB\-color\-enabled\fR . -.IP "" 4 -. -.nf - +.P Enable the exteneded coloring options\. . -.fi -. -.IP "" 0 -. .P \fB\-color\-window\fR \fIbackground\fR \fIborder color\fR \fIseparator color\fR/ . -.IP "" 4 -. -.nf - +.P Set window background, border and separator color\. . -.fi -. -.IP "" 0 -. .P \fB\-color\-normal\fR \fIbackground, foreground, background alt, highlight background, highlight foreground\fR . @@ -562,25 +519,19 @@ Set window background, border and separator color\. .P \fB\-color\-active\fR \fIbackground, foreground, background alt, highlight background, highlight foreground\fR . -.IP "" 4 -. -.nf - +.P Specify the colors used in a row per state (normal, active, urgent)\. . -.fi -. -.IP "" 0 -. .P \fB\-line\-margin\fR . +.P +Set the spacing between the rows\. +. .IP "" 4 . .nf -Set the spacing between the rows\. - Default: *3* Min: *3* Max: *50* @@ -592,29 +543,36 @@ Max: *50* .P \fB\-separator\-style\fR \fIstyle\fR . +.P +Set separator style\. Possible options are "solid" or "dash"\. +. .IP "" 4 . .nf -Set the separator style, either "solid" or "dash" - Default: *dash* . .fi . .IP "" 0 . +.P +\fB\-hide\-scrollbar\fR +. +.P +Hide the scrollbar\. +. .SS "Layout" \fB\-lines\fR . .P -Maximum number of lines the menu may show before scrolling\. +Maximum number of lines to show before scrolling\. . .IP "" 4 . .nf - rofi \-lines 25 +rofi \-lines 25 . .fi . @@ -627,13 +585,13 @@ Default: \fI15\fR \fB\-columns\fR . .P -The number of columns the menu may show before scrolling\. +Number of columns to show before scrolling\. . .IP "" 4 . .nf - rofi \-columns 2 +rofi \-columns 2 . .fi . @@ -646,39 +604,39 @@ Default: \fI1\fR \fB\-width\fR [value] . .P -Set the width of the menu as a percentage of the screen width\. +Set width of menu\. \fB[value]\fR is specified in percentage\. . .IP "" 4 . .nf - rofi \-width 60 +rofi \-width 60 . .fi . .IP "" 0 . .P -If value is larger then 100, the size is set in pixels\. e\.g\. to span a full hd monitor: +If \fB[value]\fR is larger then 100, size is set in pixels\. Example to span a full hd monitor: . .IP "" 4 . .nf - rofi \-width 1920 +rofi \-width 1920 . .fi . .IP "" 0 . .P -If the value is negative, it tries to estimates a character width\. To show 30 characters on a row: +If \fB[value]\fR is negative, it tries to estimates a character width\. To show 30 characters on a row: . .IP "" 4 . .nf - rofi \-width \-30 +rofi \-width \-30 . .fi . @@ -694,7 +652,7 @@ Default: \fI50\fR \fB\-location\fR . .P -Specify where the window should be located\. The numbers map to the following location on the monitor: +Specify where the window should be located\. The numbers map to the following locations on screen: . .IP "" 4 . @@ -729,14 +687,14 @@ Default: \fI5\fR .P \fB\-sidebar\-mode\fR . +.P +Open in sidebar\-mode\. In this mode a list of all enabled modes is shown at the bottom\. (See \fB\-modi\fR option) To show sidebar use: +. .IP "" 4 . .nf -Go into side\-bar mode, it will show list of modi at the bottom\. -To show sidebar use: - - rofi \-show run \-sidebar\-mode \-lines 0 +rofi \-show run \-sidebar\-mode \-lines 0 . .fi . @@ -754,25 +712,19 @@ Default: \fI5000\fR .P \fB\-auto\-select\fR . -.IP "" 4 -. -.nf - -When one entry is left, automatically select this\. -. -.fi -. -.IP "" 0 +.P +When one entry is left, automatically select it\. . .P \fB\-m\fR \fInum\fR \fB\-monitor\fR \fInum\fR . +.P +Select (Xinerama) monitor to display \fBrofi\fR on\. The special number \-1 denotes the currently focused monitor, the number \-2 denotes the currently focused window (i\.e\. rofi will be displayed on top of the focused window)\. +. .IP "" 4 . .nf -Select (Xinerama) monitor to display **rofi** on\. The special number \-1 denotes the currently focused monitor, the number \-2 denotes the currently focused window (i\.e\. rofi will be displayed on top of the focused window)\. - Default: *\-1* . .fi @@ -789,7 +741,7 @@ Specify what terminal to start\. . .nf - rofi \-terminal xterm +rofi \-terminal xterm . .fi . @@ -819,21 +771,14 @@ Default: \fI{terminal} \-e {ssh\-client} {host}\fR .P \fB\-parse\-hosts\fR . -.IP "" 4 -. -.nf - -Parse the `/etc/hosts` files for entries\. -. -.fi -. -.IP "" 0 +.P +Parse the \fB/etc/hosts\fR file for entries\. . .SS "Run settings" \fB\-run\-command\fR \fIcmd\fR . .P -Set the command (\fI{cmd}\fR) to execute when running an application\. See \fIPATTERN\fR\. +Set command (\fI{cmd}\fR) to execute when running an application\. See \fIPATTERN\fR\. . .P Default: \fI{cmd}\fR @@ -842,7 +787,7 @@ Default: \fI{cmd}\fR \fB\-run\-shell\-command\fR \fIcmd\fR . .P -Set the command to execute when running an application in a shell\. See \fIPATTERN\fR\. +Set command to execute when running an application in a shell\. See \fIPATTERN\fR\. . .P Default: \fI{terminal} \-e {cmd}\fR @@ -859,15 +804,14 @@ Default: \fI""\fR .SS "Combi settings" \fB\-combi\-modi\fR \fImode1,mode2\fR . +.P +The modi to combine in combi mode\. For syntax to see \fB\-modi\fR\. To get one merge view, of window,run,ssh: +. .IP "" 4 . .nf -The modi to combine in the combi mode\. -For syntax to see `\-modi`\. -To get one merge view, of window,run,ssh: - - rofi \-show combi \-combi\-modi "window,run,ssh" +rofi \-show combi \-combi\-modi "window,run,ssh" . .fi . @@ -888,13 +832,14 @@ When searching sort the result based on levenshtein distance\. .SS "Dmenu specific" \fB\-sep\fR \fIseparator\fR . +.P +Separator for dmenu\. Example: To show list \'a\' to \'e\' with \'|\' as separator: +. .IP "" 4 . .nf -Separator for dmenu\. For example to show list a to e with \'|\' as separator: - - echo "a|b|c|d|e" | rofi \-sep \'|\' \-dmenu +echo "a|b|c|d|e" | rofi \-sep \'|\' \-dmenu . .fi . @@ -903,34 +848,30 @@ Separator for dmenu\. For example to show list a to e with \'|\' as separator: .P \fB\-p\fR \fIprompt\fR . +.P +Specify the prompt to show in dmenu mode\. E\.g\. select monkey a,b,c,d or e\. +. .IP "" 4 . .nf -Specify the prompt to show in dmenu mode\. E\.g\. select monkey a,b,c,d or e\. - - echo "a|b|c|d|e" | rofi \-sep \'|\' \-dmenu \-p "monkey:" - -Default: *dmenu* +echo "a|b|c|d|e" | rofi \-sep \'|\' \-dmenu \-p "monkey:" . .fi . .IP "" 0 . .P -\fB\-selected\-row\fR \fIselected row\fR +Default: \fIdmenu\fR . -.IP "" 4 +.P +\fB\-selected\-row\fR \fIselected row\fR . -.nf - +.P Select a certain row\. - -Default: *0* . -.fi -. -.IP "" 0 +.P +Default: \fI0\fR . .P \fB\-l\fR \fInumber of lines to show\fR @@ -942,7 +883,7 @@ Maximum number of lines the menu may show before scrolling\. . .nf - rofi \-lines 25 +rofi \-lines 25 . .fi . @@ -954,113 +895,68 @@ Default: \fI15\fR .P \fB\-i\fR . -.IP "" 4 -. -.nf - -Makes dmenu match menu entries case insensitively\. -. -.fi -. -.IP "" 0 +.P +Makes dmenu searches case\-insensitive . .P \fB\-a\fR \fIX\fR . -.IP "" 4 -. -.nf - -Active row, mark row X as active\. (starting at 0) -You can specify single element: \-a 3 -A range: \-a 3\-8 -or a set of rows: \-a 0,2 -Or any combination: \-a 0,2\-3,9 -. -.fi -. -.IP "" 0 +.P +Active row, mark row X as active\. (starting at 0) You can specify single element: \-a 3 A range: \-a 3\-8 or a set of rows: \-a 0,2 or any combination: \-a 0,2\-3,9 . .P \fB\-u\fR \fIX\fR . -.IP "" 4 +.P +Urgent row, mark row X as urgent\. (starting at 0) You can specify single element: \-u 3 A range: \-u 3\-8 or a set of rows: \-u 0,2 or any combination: \-u 0,2\-3,9 . -.nf - -Urgent row, mark row X as urgent\. (starting at 0) -You can specify single element: \-u 3 -A range: \-u 3\-8 -or a set of rows: \-u 0,2 -Or any combination: \-u 0,2\-3,9 +.P +\fB\-only\-match\fR . -.fi +.P +Only return a selected item, do not allow custom entry\. This mode always returns an entry, or returns directly when no entries given\. . -.IP "" 0 +.P +\fB\-no\-custom\fR . .P -\fB\-only\-match\fR +Only return a selected item, do not allow custom entry\. This mode returns directly when no entries given\. . -.IP "" 4 +.P +\fB\-format\fR \fIformat\fR . -.nf - -Only return a selected item, do not allow custom entry\. -This mode always returns an entry, or returns directly when no entries given\. +.P +Allows the output of dmenu to be customized (N is total number of input entries): . -.fi +.IP "\(bu" 4 +\'s\' selected string\. . -.IP "" 0 +.IP "\(bu" 4 +\'i\' index (0 \- (N\-1))\. . -.P -\fB\-no\-custom\fR +.IP "\(bu" 4 +\'d\' index (1 \- N)\. . -.IP "" 4 +.IP "\(bu" 4 +\'q\' quote string\. . -.nf - -Only return a selected item, do not allow custom entry\. -This mode returns directly when no entries given\. +.IP "\(bu" 4 +\'f\' filter string (user input)\. . -.fi +.IP "\(bu" 4 +\'F\' quoted filter string (user input)\. . .IP "" 0 . .P -\fB\-format\fR \fIformat\fR -. -.IP "" 4 -. -.nf - -Allows the output of dmenu to be customized (N is total number of input entries): - - * \'s\' selected string\. - * \'i\' index (0 \- (N\-1))\. - * \'d\' index (1 \- N)\. - * \'q\' quote string\. - * \'f\' filter string (user input)\. - * \'F\' quoted filter string (user input)\. - Default: \'s\' . -.fi -. -.IP "" 0 -. .P \fB\-select\fR \fIstring\fR . -.IP "" 4 -. -.nf - +.P Select first line that matches the given string . -.fi -. -.IP "" 0 -. .P \fB\-mesg\fR \fIstring\fR . @@ -1070,30 +966,14 @@ Add a message line below the filter entry box\. Supports pango markup\. For more .SS "Message dialog" \fB\-e\fR \fImessage\fR . -.IP "" 4 -. -.nf - -Popup a message dialog (used internally for showing errors) with *message*\. -Message can be multi\-line\. -. -.fi -. -.IP "" 0 +.P +Popup a message dialog (used internally for showing errors) with \fImessage\fR\. Message can be multi\-line\. . .SS "Other" \'\-pid\' \fIpath\fR . -.IP "" 4 -. -.nf - -Make **rofi** create a pid file and check this on startup\. Avoiding multiple copies running -simultaneous\. This is useful when running **rofi** from a keybinding daemon\. -. -.fi -. -.IP "" 0 +.P +Make \fBrofi\fR create a pid file and check this on startup\. Avoiding multiple copies running simultaneously\. This is useful when running \fBrofi\fR from a keybinding daemon\. . .SS "Debug" \fB\-dump\-xresources\fR @@ -1222,13 +1102,20 @@ rofi \-color\-normal "#fdf6e3,#002b36,#eee8d5,#586e75,#eee8d5" .IP "" 0 . .SH "COLORS" -Rofi has an experimental mode for a \'nicer\' transparency\. The idea is that you can make the background of the window transparent but the text not\. This way, in contrast to the \fB\-opacity\fR option, the text is still fully visible and readable\. To use this there are 2 requirements: 1\. Your Xserver supports TrueColor, 2\. You are running a composite manager\. If this is satisfied you can use the following format for colors: +Rofi has an experimental mode for a \'nicer\' transparency\. The idea is to make the background of the window transparent, leaving the text opaque\. There are 2 requirements for this feature: 1\. Your Xserver supports TrueColor, 2\. You are running a composite manager\. If this is satisfied you can use the following format for colors: . -.P +.IP "" 4 +. +.nf + argb:FF444444 . +.fi +. +.IP "" 0 +. .P -The first two fields specify the alpha level\. This determines how much the background shines through the color (00 everything, FF nothing)\. E\.g\. \'argb:00FF0000\' gives you a bright red color with the background shining through\. If you want a dark greenish transparent color use: \'argb:dd2c3311\'\. This can be done for any color; it is therefore possible to have solid borders, the selected row solid, and the others slightly transparent\. +The first two fields specify the alpha level\. This determines the amount of transparency\. (00 everything, FF nothing)\. The other fields represent the actual color, in hex\. . .SH "KEYBINDINGS" \fBrofi\fR has the following key\-bindings: |