Age | Commit message (Collapse) | Author |
|
|
|
Credit to @okdana for catching this. This naming is a bit more
consistent with the existing --max-columns flag.
|
|
|
|
I went through every commit since the 0.10.0 release and added anything
that I thought was missing.
|
|
This flag, when set, will automatically dispatch to PCRE2 if the given
regex cannot be compiled by Rust's regex engine. If both engines fail to
compile the regex, then both errors are surfaced.
Closes #1155
|
|
The default stack size is 32KB, and this increases it to 10MB. 32KB is
pretty paltry in the environments in which ripgrep runs, and 10MB is
easily afforded as a maximum size. (The size limit we set for Rust's
regex engine is considerably larger.)
This was motivated due to the fack that JIT stack limits have been
observed to be hit in the wild:
https://github.com/Microsoft/vscode/issues/64606
|
|
This flag will output details about the version of PCRE2 that ripgrep
is using (if any).
|
|
This sets up the release announcement and briefly describes the
versioning change. The actual version change itself won't happen until
the release.
Closes #1172
|
|
Fixes #1189
|
|
This commit adds support for showing a preview of long lines. While the
default still remains as completely suppressing the entire line, this
new functionality will show the first N graphemes of a matching line,
including the number of matches that are suppressed.
This was unfortunately a fairly invasive change to the printer that
required a bit of refactoring. On the bright side, the single line
and multi-line coloring are now more unified than they were before.
Closes #1078
|
|
This commit attempts to surface binary filtering in a slightly more
user friendly way. Namely, before, ripgrep would silently stop
searching a file if it detected a NUL byte, even if it had previously
printed a match. This can lead to the user quite reasonably assuming
that there are no more matches, since a partial search is fairly
unintuitive. (ripgrep has this behavior by default because it really
wants to NOT search binary files at all, just like it doesn't search
gitignored or hidden files.)
With this commit, if a match has already been printed and ripgrep detects
a NUL byte, then it will print a warning message indicating that the search
stopped prematurely.
Moreover, this commit adds a new flag, --binary, which causes ripgrep to
stop filtering binary files, but in a way that still avoids dumping
binary data into terminals. That is, the --binary flag makes ripgrep
behave more like grep's default behavior.
For files explicitly specified in a search, e.g., `rg foo some-file`,
then no binary filtering is applied (just like no gitignore and no
hidden file filtering is applied). Instead, ripgrep behaves as if you
gave the --binary flag for all explicitly given files.
This was a fairly invasive change, and potentially increases the UX
complexity of ripgrep around binary files. (Before, there were two
binary modes, where as now there are three.) However, ripgrep is now a
bit louder with warning messages when binary file detection might
otherwise be hiding potential matches, so hopefully this is a net
improvement.
Finally, the `-uuu` convenience now maps to `--no-ignore --hidden
--binary`, since this is closer to the actualy intent of the
`--unrestricted` flag, i.e., to reduce ripgrep's smart filtering. As a
consequence, `rg -uuu foo` should now search roughly the same number of
bytes as `grep -r foo`, and `rg -uuua foo` should search roughly the
same number of bytes as `grep -ra foo`. (The "roughly" weasel word is
used because grep's and ripgrep's binary file detection might differ
somewhat---perhaps based on buffer sizes---which can impact exactly what
is and isn't searched.)
See the numerous tests in tests/binary.rs for intended behavior.
Fixes #306, Fixes #855
|
|
This makes the case of searching for a dictionary of a very large number
of literals much much faster. (~10x or so.) In particular, we achieve this
by short-circuiting the construction of a full regex when we know we have
a simple alternation of literals. Building the regex for a large dictionary
(>100,000 literals) turns out to be quite slow, even if it internally will
dispatch to Aho-Corasick.
Even that isn't quite enough. It turns out that even *parsing* such a regex
is quite slow. So when the -F/--fixed-strings flag is set, we short
circuit regex parsing completely and jump straight to Aho-Corasick.
We aren't quite as fast as GNU grep here, but it's much closer (less than
2x slower).
In general, this is somewhat of a hack. In particular, it seems plausible
that this optimization could be implemented entirely in the regex engine.
Unfortunately, the regex engine's internals are just not amenable to this
at all, so it would require a larger refactoring effort. For now, it's
good enough to add this fairly simple hack at a higher level.
Unfortunately, if you don't pass -F/--fixed-strings, then ripgrep will
be slower, because of the aforementioned missing optimization. Moreover,
passing flags like `-i` or `-S` will cause ripgrep to abandon this
optimization and fall back to something potentially much slower. Again,
this fix really needs to happen inside the regex engine, although we
might be able to special case -i when the input literals are pure ASCII
via Aho-Corasick's `ascii_case_insensitive`.
Fixes #497, Fixes #838
|
|
This brings in an updated `encoding_rs` crate that uses `packed_simd`,
which compiles on the latest nightly. Compilation times do appear to be
impacted significantly though.
Fixes #1175 (again)
|
|
This was fixed by bumping the MSRV above Rust 1.28.
Fixes #916
|
|
|
|
This fixes what appears to be a pretty egregious regression where the
`-F/--fixed-strings` flag wasn't be applied to patterns supplied via
the `-f/--file` flag. The same bug existed for the `-x/--line-regexp`
flag as well, which we fix here.
Fixes #1176
|
|
This changes how ripgrep emit exit status codes. In particular, any error
that occurs while searching will now cause ripgrep to emit a `2` exit
code, where as it previously would emit either a `0` or a `1` code based
on whether it matched or not. That is, ripgrep would only emit a `2` exit
code for a catastrophic error.
This tweak includes additional logic that GNU grep adheres to, which seems
like good sense. Namely, if -q/--quiet is given, and an error occurs and
a match occurs, then ripgrep will emit a `0` exit code.
Closes #1159
|
|
Previously, we relied on clap to handle printing either an error
message, or --help/--version output, in addition to setting the exit
status code. Unfortunately, for --help/--version output, clap was
panicking if the write failed, which can happen in fairly common
scenarios via a broken pipe error. e.g., `rg -h | head`.
We fix this by using clap's "safe" API and doing the printing ourselves.
We also set the exit code to `2` when an invalid command has been given.
Fixes #1125 and partially addresses #1159
|
|
Fixes #1091
|
|
Fixes #1103
|
|
|
|
This flag causes ripgrep to ignore `.ignore` files.
Closes #1138
|
|
Add a note about it to the README.
Also, remove mention of the avx-accel feature since it no longer exists.
(bytecount now uses runtime detection to enable SIMD support.)
Fixes #1175
|
|
|
|
Previously, `man gitignore` specified that `**` was invalid unless it
was used in one of a few specific circumstances, i.e., `**`, `a/**`,
`**/b` or `a/**/b`. That is, `**` always had to be surrounded by either
a path separator or the beginning/end of the pattern.
It turns out that git itself has treated `**` outside the above contexts
as valid for quite a while, so there was an inconsistency between the
spec `man gitignore` and the implementation, and it wasn't clear which
was actually correct.
@okdana filed a bug against git[1] and got this fixed. The spec was wrong,
which has now been fixed [2] and updated[2].
This commit brings ripgrep in line with git and treats `**` outside of
the above contexts as two consecutive `*` patterns. We deprecate the
`InvalidRecursive` error since it is no longer used.
Fixes #373, Fixes #1098
[1] - https://public-inbox.org/git/C16A9F17-0375-42F9-90A9-A92C9F3D8BBA@dana.is
[2] - https://github.com/git/git/commit/627186d0206dcb219c43f8e6670b4487802a4921
[3] - https://git-scm.com/docs/gitignore
|
|
|
|
|
|
|
|
This commit fixes a bug where both of the following commands always
reported an error:
rg --files-with-matches foo file
rg --files-without-match foo file
In particular, the printer was erroneously respecting the `path` option
even the the summary kind was `PathWithMatch` or `PathWithoutMatch`. The
documented behavior is that those summary kinds always require a path,
and thus, the `path` option has no effect. We fix this by correcting the
case analysis.
This also fixes a bug where the exit code for `--files-without-match`
was not set correctly. We update the printer's `has_match` method to
report the correct value.
Fixes #1106, Closes #1130
|
|
|
|
The --ignore-file-case-insensitive flag causes all
.gitignore/.rgignore/.ignore files to have their globs matched without
regard for case. Because this introduces a potentially significant
performance regression, this is always disabled by default. Users that
need case insensitive matching can enable it on a case by case basis.
Closes #1164, Closes #1170
|
|
|
|
|
|
The --pre-glob flag is like the --glob flag, except it applies to filtering
files through the preprocessor instead of for search. This makes it
possible to apply the preprocessor to only a small subset of files, which
can greatly reduce the process overhead of using a preprocessor when
searching large directories.
|
|
These flags provide granular control over ripgrep's buffering strategy.
The --line-buffered flag can be genuinely useful in certain types of shell
pipelines. The --block-buffered flag has a murkier use case, but we add it
for completeness.
|
|
This commit moves a lot of "utility" code from ripgrep core into
grep-cli. Any one of these things might not be worth creating a new
crate, but combining everything together results in a fair number of a
convenience routines that make up a decent sized crate.
There is potentially more we could move into the crate, but much of what
remains in ripgrep core is almost entirely dealing with the number of
flags we support.
In the course of doing moving things to the grep-cli crate, we clean up
a lot of gunk and improve failure modes in a number of cases. In
particular, we've fixed a bug where other processes could deadlock if
they write too much to stderr.
Fixes #990
|
|
|
|
This brings the changelog up to date with HEAD and rewords a few things.
|
|
Fuchsia is a pain to spell.
PR #1026
|
|
This commit fixes a bug where the first path always reported itself as
as symlink via `path_is_symlink`.
Part of this fix includes updating walkdir to 2.2.1, which also includes
a corresponding bug fix.
Fixes #984
|
|
This commit beefs up the package metadata used by the 'cargo deb' tool to
produce a binary dpkg. In particular, we now include ripgrep's man page.
This commit includes a new script, 'ci/build_deb.sh', which will handle
the build process for a dpkg, which has become a bit more nuanced than
just running 'cargo deb'. We don't (yet) run this script in CI.
Fixes #842
|
|
This also updates some code to make use of our more liberal versioning
requirement, including the use of crossbeam-channel instead of the MsQueue
from the older an unmaintained crossbeam 0.3. This does regrettably add
a sizable number of dependencies, however, compile times seem mostly
unaffected.
Closes #1019
|
|
This commit updates the CHANGELOG to reflect all the work done to make
libripgrep a reality.
* Closes #162 (libripgrep)
* Closes #176 (multiline search)
* Closes #188 (opt-in PCRE2 support)
* Closes #244 (JSON output)
* Closes #416 (Windows CRLF support)
* Closes #917 (trim prefix whitespace)
* Closes #993 (add --null-data flag)
* Closes #997 (--passthru works with --replace)
* Fixes #2 (memory maps and context handling work)
* Fixes #200 (ripgrep stops when pipe is closed)
* Fixes #389 (more intuitive `-w/--word-regexp`)
* Fixes #643 (detection of stdin on Windows is better)
* Fixes #441, Fixes #690, Fixes #980 (empty matching lines are weird)
* Fixes #764 (coalesce color escapes)
* Fixes #922 (memory maps failing is no big deal)
* Fixes #937 (color escapes no longer used for empty matches)
* Fixes #940 (--passthru does not impact exit status)
* Fixes #1013 (show runtime CPU features in --version output)
|
|
|
|
This commit updates the logic for finding the value of git's
`core.excludesFile` configuration parameter. Namely, we now check
`$XDG_CONFIG_DIR/git/config` in addition to `$HOME/.gitconfig` (where
the latter overrules the former on a knob-by-knob basis).
Fixes #995
|
|
Generally speaking, ripgrep prevents the case of not having any patterns
via its arg parsing. However, it is possible for users to provide a file
of patterns via the `-f` flag. If that file is empty, then ripgrep has
nothing to search for and therefore should not ever produce any match.
One way of fixing this might be to replace the absence of patterns with
a pattern that can never match, but this still requires opening and
searching through every file, which is quite a waste. Instead, we detect
this case explicitly and quit early.
Fixes #900
|
|
This commit tweaks the implementation of the --files flag to stop early
when --quiet is provided.
Fixes #907
|
|
This removes logic from the decompressor for skipping tar archives. This
logic was originally added under the assumption that we probably want to
avoid the cost of reading them. However, this is generally inconsistent
with how ripgrep treats files like tar archives: it should search them
and do binary detection like normal.
Fixes #918
|
|
This commit adds a new --no-ignore-global flag that permits disabling
the use of global gitignore filtering. Global gitignores are generally
found in `$HOME/.config/git/ignore`, but its location can be configured
via git's `core.excludesFile` option.
Closes #934
|
|
This commit fixes an interesting bug in the `ignore` crate where it
would basically respect any `.gitignore` file anywhere (including global
gitignores in `~/.config/git/ignore`), regardless of whether we were
searching in a git repository or not. This commit rectifies that
behavior to only respect gitignore rules when in a git repo.
The key change here is to move the logic of whether to traverse parents
into the directory matcher rather than putting the onus on the directory
traverser. In particular, we now need to traverse parent directories in
more cases than we previously did, since we need to determine whether
we're in a git repository or not.
Fixes #934
|