#! /usr/bin/env perl # Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved. # # Licensed under the OpenSSL license (the "License"). You may not use # this file except in compliance with the License. You can obtain a copy # in the file LICENSE in the source distribution or at # https://www.openssl.org/source/license.html use strict; use OpenSSL::Test qw/:DEFAULT cmdstr srctop_file srctop_dir bldtop_dir/; use OpenSSL::Test::Utils; use File::Temp qw(tempfile); use TLSProxy::Proxy; use checkhandshake qw(checkhandshake @handmessages @extensions); my $test_name = "test_tls13messages"; setup($test_name); plan skip_all => "TLSProxy isn't usable on $^O" if $^O =~ /^(VMS|MSWin32)$/; plan skip_all => "$test_name needs the dynamic engine feature enabled" if disabled("engine") || disabled("dynamic-engine"); plan skip_all => "$test_name needs the sock feature enabled" if disabled("sock"); plan skip_all => "$test_name needs TLSv1.3 enabled" if disabled("tls1_3"); $ENV{OPENSSL_ia32cap} = '~0x200000200000000'; $ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf"); @handmessages = ( [TLSProxy::Message::MT_CLIENT_HELLO, checkhandshake::ALL_HANDSHAKES], [TLSProxy::Message::MT_HELLO_RETRY_REQUEST, checkhandshake::HRR_HANDSHAKE | checkhandshake::HRR_RESUME_HANDSHAKE], [TLSProxy::Message::MT_CLIENT_HELLO, checkhandshake::HRR_HANDSHAKE | checkhandshake::HRR_RESUME_HANDSHAKE], [TLSProxy::Message::MT_SERVER_HELLO, checkhandshake::ALL_HANDSHAKES], [TLSProxy::Message::MT_ENCRYPTED_EXTENSIONS, checkhandshake::ALL_HANDSHAKES], [TLSProxy::Message::MT_CERTIFICATE_REQUEST, checkhandshake::CLIENT_AUTH_HANDSHAKE], [TLSProxy::Message::MT_CERTIFICATE, checkhandshake::ALL_HANDSHAKES & ~(checkhandshake::RESUME_HANDSHAKE | checkhandshake::HRR_RESUME_HANDSHAKE)], [TLSProxy::Message::MT_CERTIFICATE_VERIFY, checkhandshake::ALL_HANDSHAKES & ~(checkhandshake::RESUME_HANDSHAKE | checkhandshake::HRR_RESUME_HANDSHAKE)], [TLSProxy::Message::MT_FINISHED, checkhandshake::ALL_HANDSHAKES], [TLSProxy::Message::MT_CERTIFICATE, checkhandshake::CLIENT_AUTH_HANDSHAKE], [TLSProxy::Message::MT_CERTIFICATE_VERIFY, checkhandshake::CLIENT_AUTH_HANDSHAKE], [TLSProxy::Message::MT_FINISHED, checkhandshake::ALL_HANDSHAKES], [0, 0] ); @extensions = ( [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SERVER_NAME, checkhandshake::SERVER_NAME_CLI_EXTENSION], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_STATUS_REQUEST, checkhandshake::STATUS_REQUEST_CLI_EXTENSION], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_GROUPS, checkhandshake::DEFAULT_EXTENSIONS], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EC_POINT_FORMATS, checkhandshake::DEFAULT_EXTENSIONS], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SIG_ALGS, checkhandshake::DEFAULT_EXTENSIONS], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ALPN, checkhandshake::ALPN_CLI_EXTENSION], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SCT, checkhandshake::SCT_CLI_EXTENSION], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ENCRYPT_THEN_MAC, checkhandshake::DEFAULT_EXTENSIONS], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EXTENDED_MASTER_SECRET, checkhandshake::DEFAULT_EXTENSIONS], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SESSION_TICKET, checkhandshake::DEFAULT_EXTENSIONS], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_KEY_SHARE, checkhandshake::DEFAULT_EXTENSIONS], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_VERSIONS, checkhandshake::DEFAULT_EXTENSIONS], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK_KEX_MODES, checkhandshake::DEFAULT_EXTENSIONS], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK, checkhandshake::PSK_CLI_EXTENSION], [TLSProxy::Message::MT_HELLO_RETRY_REQUEST, TLSProxy::Message::EXT_KEY_SHARE, checkhandshake::KEY_SHARE_HRR_EXTENSION], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SERVER_NAME, checkhandshake::SERVER_NAME_CLI_EXTENSION], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_STATUS_REQUEST, checkhandshake::STATUS_REQUEST_CLI_EXTENSION], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_GROUPS, checkhandshake::DEFAULT_EXTENSIONS], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SIG_ALGS, checkhandshake::DEFAULT_EXTENSIONS], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ALPN, checkhandshake::ALPN_CLI_EXTENSION], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SCT, checkhandshake::SCT_CLI_EXTENSION], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_KEY_SHARE, checkhandshake::DEFAULT_EXTENSIONS], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_VERSIONS, checkhandshake::DEFAULT_EXTENSIONS], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK_KEX_MODES, checkhandshake::DEFAULT_EXTENSIONS], [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK, checkhandshake::PSK_CLI_EXTENSION], [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_KEY_SHARE, checkhandshake::DEFAULT_EXTENSIONS], [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_PSK, checkhandshake::PSK_SRV_EXTENSION], [TLSProxy::Message::MT_ENCRYPTED_EXTENSIONS, TLSProxy::Message::EXT_SERVER_NAME, checkhandshake::SERVER_NAME_SRV_EXTENSION], [TLSProxy::Message::MT_ENCRYPTED_EXTENSIONS, TLSProxy::Message::EXT_ALPN, checkhandshake::ALPN_SRV_EXTENSION], [TLSProxy::Message::MT_CERTIFICATE, TLSProxy::Message::EXT_STATUS_REQUEST, checkhandshake::STATUS_REQUEST_SRV_EXTENSION], [TLSProxy::Message::MT_CERTIFICATE, TLSProxy::Message::EXT_SCT, checkhandshake::SCT_SRV_EXTENSION], [0,0,0] ); my $proxy = TLSProxy::Proxy->new( undef, cmdstr(app(["openssl"]), display => 1), srctop_file("apps", "server.pem"), (!$ENV{HARNESS_ACTIVE} || $ENV{HARNESS_VERBOSE}) ); #Test 1: Check we get all the right messages for a default handshake (undef, my $session) = tempfile(); $proxy->serverconnects(2); $proxy->clientflags("-sess_out ".$session); $proxy->sessionfile($session); $proxy->start() or plan skip_all => "Unable to start up Proxy for tests"; plan tests => 15; checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE, checkhandshake::DEFAULT_EXTENSIONS, "Default handshake test"); #Test 2: Resumption handshake $proxy->clearClient(); $proxy->clientflags("-sess_in ".$session); $proxy->clientstart(); checkhandshake($proxy, checkhandshake::RESUME_HANDSHAKE, checkhandshake::DEFAULT_EXTENSIONS | checkhandshake::PSK_CLI_EXTENSION | checkhandshake::PSK_SRV_EXTENSION, "Resumption handshake test"); #Test 3: A status_request handshake (client request only) $proxy->clear(); $proxy->clientflags("-status"); $proxy->start(); checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE, checkhandshake::DEFAULT_EXTENSIONS | checkhandshake::STATUS_REQUEST_CLI_EXTENSION, "status_request handshake test (client)"); #Test 4: A status_request handshake (server support only) $proxy->clear(); $proxy->serverflags("-status_file " .srctop_file("test", "recipes", "ocsp-response.der")); $proxy->start(); checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE, checkhandshake::DEFAULT_EXTENSIONS, "status_request handshake test (server)"); #Test 5: A status_request handshake (client and server) #TODO(TLS1.3): TLS1.3 doesn't actually have CertificateStatus messages. This is #a temporary test until such time as we do proper TLS1.3 style certificate #status $proxy->clear(); $proxy->clientflags("-status"); $proxy->serverflags("-status_file " .srctop_file("test", "recipes", "ocsp-response.der")); $proxy->start(); checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE, checkhandshake::DEFAULT_EXTENSIONS | checkhandshake::STATUS_REQUEST_CLI_EXTENSION | checkhandshake::STATUS_REQUEST_SRV_EXTENSION, "status_request handshake test"); #Test 6: A client auth handshake $proxy->clear(); $proxy->clientflags("-cert ".srctop_file("apps", "server.pem")); $proxy->serverflags("-Verify 5"); $proxy->start(); checkhandshake($proxy, checkhandshake::CLIENT_AUTH_HANDSHAKE, checkhandshake::DEFAULT_EXTENSIONS, "Client auth handshake test"); #Test 7: Server name handshake (no client request) $proxy->clear(); $proxy->clientflags("-noservername"); $proxy->start(); checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE, checkhandshake::DEFAULT_EXTENSIONS & ~checkhandshake::SERVER_NAME_CLI_EXTENSION, "Server name handshake test (client)"); #Test 8: Server name handshake (server support only) $proxy->clear(); $proxy->clientflags("-noservername"); $proxy->serverflags("-servername testhost"); $proxy->start(); checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE, checkhandshake::DEFAULT_EXTENSIONS & ~checkhandshake::SERVER_NAME_CLI_EXTENSION, "Server name handshake test (server)"); #Test 9: Server name handshake (client and server) $proxy->clear(); $proxy->clientflags("-servername testhost"); $proxy->serverflags("-servername testhost"); $proxy->start(); checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE, checkhandshake::DEFAULT_EXTENSIONS | checkhandshake::SERVER_NAME_SRV_EXTENSION, "Server name handshake test"); #Test 10: ALPN handshake (client request only) $proxy->clear(); $proxy->clientflags("-alpn test"); $proxy->start(); checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE, checkhandshake::DEFAULT_EXTENSIONS | checkhandshake::ALPN_CLI_EXTENSION, "ALPN handshake test (client)"); #Test 11: ALPN handshake (server support only) $proxy->clear(); $proxy->serverflags("-alpn test"); $proxy->start(); checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE, checkhandshake::DEFAULT_EXTENSIONS, "ALPN handshake test (server)"); #Test 12: ALPN handshake (client and server) $proxy->clear(); $proxy->clientflags("-alpn test"); $proxy->serverflags("-alpn test"); $proxy->start(); checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE, checkhandshake::DEFAULT_EXTENSIONS | checkhandshake::ALPN_CLI_EXTENSION | checkhandshake::ALPN_SRV_EXTENSION, "ALPN handshake test"); SKIP: { skip "No CT, EC or OCSP support in this OpenSSL build", 1 if disabled("ct") || disabled("ec") || disabled("ocsp"); #Test 13: SCT handshake (client request only) $proxy->clear(); #Note: -ct also sends status_request $proxy->clientflags("-ct"); $proxy->serverflags("-status_file " .srctop_file("test", "recipes", "ocsp-response.der") ." -serverinfo ".srctop_file("test", "serverinfo2.pem")); $proxy->start(); checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE, checkhandshake::DEFAULT_EXTENSIONS | checkhandshake::SCT_CLI_EXTENSION | checkhandshake::SCT_SRV_EXTENSION | checkhandshake::STATUS_REQUEST_CLI_EXTENSION | checkhandshake::STATUS_REQUEST_SRV_EXTENSION, "SCT handshake test"); } #Test 14: HRR Handshake $proxy->clear(); $proxy->serverflags("-curves P-256"); $proxy->start(); checkhandshake($proxy, checkhandshake::HRR_HANDSHAKE, checkhandshake::DEFAULT_EXTENSIONS | checkhandshake::KEY_SHARE_HRR_EXTENSION, "HRR handshake test"); #Test 15: Resumption handshake with HRR $proxy->clear(); $proxy->clientflags("-sess_in ".$session); $proxy->serverflags("-curves P-256"); $proxy->start(); checkhandshake($proxy, checkhandshake::HRR_RESUME_HANDSHAKE, checkhandshake::DEFAULT_EXTENSIONS | checkhandshake::KEY_SHARE_HRR_EXTENSION | checkhandshake::PSK_CLI_EXTENSION | checkhandshake::PSK_SRV_EXTENSION, "Resumption handshake with HRR test"); unlink $session;