From 83975c80bbc3e84cc605e0491707a6517f5dd346 Mon Sep 17 00:00:00 2001 From: Matt Caswell Date: Mon, 5 Jan 2015 11:30:03 +0000 Subject: Re-align some comments after running the reformat script. This should be a one off operation (subsequent invokation of the script should not move them) This commit is for the 1.0.2 changes Reviewed-by: Tim Hudson --- ssl/s3_clnt.c | 152 +++++++++++++++++++++++++++++----------------------------- 1 file changed, 76 insertions(+), 76 deletions(-) (limited to 'ssl/s3_clnt.c') diff --git a/ssl/s3_clnt.c b/ssl/s3_clnt.c index 8960604090..f186c3cf97 100644 --- a/ssl/s3_clnt.c +++ b/ssl/s3_clnt.c @@ -723,36 +723,36 @@ int ssl3_client_hello(SSL *s) /* Do the message type and length last */ d = p = ssl_handshake_start(s); - /*- - * version indicates the negotiated version: for example from - * an SSLv2/v3 compatible client hello). The client_version - * field is the maximum version we permit and it is also - * used in RSA encrypted premaster secrets. Some servers can - * choke if we initially report a higher version then - * renegotiate to a lower one in the premaster secret. This - * didn't happen with TLS 1.0 as most servers supported it - * but it can with TLS 1.1 or later if the server only supports - * 1.0. - * - * Possible scenario with previous logic: - * 1. Client hello indicates TLS 1.2 - * 2. Server hello says TLS 1.0 - * 3. RSA encrypted premaster secret uses 1.2. - * 4. Handhaked proceeds using TLS 1.0. - * 5. Server sends hello request to renegotiate. - * 6. Client hello indicates TLS v1.0 as we now - * know that is maximum server supports. - * 7. Server chokes on RSA encrypted premaster secret - * containing version 1.0. - * - * For interoperability it should be OK to always use the - * maximum version we support in client hello and then rely - * on the checking of version to ensure the servers isn't - * being inconsistent: for example initially negotiating with - * TLS 1.0 and renegotiating with TLS 1.2. We do this by using - * client_version in client hello and not resetting it to - * the negotiated version. - */ + /*- + * version indicates the negotiated version: for example from + * an SSLv2/v3 compatible client hello). The client_version + * field is the maximum version we permit and it is also + * used in RSA encrypted premaster secrets. Some servers can + * choke if we initially report a higher version then + * renegotiate to a lower one in the premaster secret. This + * didn't happen with TLS 1.0 as most servers supported it + * but it can with TLS 1.1 or later if the server only supports + * 1.0. + * + * Possible scenario with previous logic: + * 1. Client hello indicates TLS 1.2 + * 2. Server hello says TLS 1.0 + * 3. RSA encrypted premaster secret uses 1.2. + * 4. Handhaked proceeds using TLS 1.0. + * 5. Server sends hello request to renegotiate. + * 6. Client hello indicates TLS v1.0 as we now + * know that is maximum server supports. + * 7. Server chokes on RSA encrypted premaster secret + * containing version 1.0. + * + * For interoperability it should be OK to always use the + * maximum version we support in client hello and then rely + * on the checking of version to ensure the servers isn't + * being inconsistent: for example initially negotiating with + * TLS 1.0 and renegotiating with TLS 1.2. We do this by using + * client_version in client hello and not resetting it to + * the negotiated version. + */ #if 0 *(p++) = s->version >> 8; *(p++) = s->version & 0xff; @@ -2449,25 +2449,25 @@ int ssl3_send_client_key_exchange(SSL *s) goto err; } - /*- - * 20010406 VRS - Earlier versions used KRB5 AP_REQ - * in place of RFC 2712 KerberosWrapper, as in: - * - * Send ticket (copy to *p, set n = length) - * n = krb5_ap_req.length; - * memcpy(p, krb5_ap_req.data, krb5_ap_req.length); - * if (krb5_ap_req.data) - * kssl_krb5_free_data_contents(NULL,&krb5_ap_req); - * - * Now using real RFC 2712 KerberosWrapper - * (Thanks to Simon Wilkinson ) - * Note: 2712 "opaque" types are here replaced - * with a 2-byte length followed by the value. - * Example: - * KerberosWrapper= xx xx asn1ticket 0 0 xx xx encpms - * Where "xx xx" = length bytes. Shown here with - * optional authenticator omitted. - */ + /*- + * 20010406 VRS - Earlier versions used KRB5 AP_REQ + * in place of RFC 2712 KerberosWrapper, as in: + * + * Send ticket (copy to *p, set n = length) + * n = krb5_ap_req.length; + * memcpy(p, krb5_ap_req.data, krb5_ap_req.length); + * if (krb5_ap_req.data) + * kssl_krb5_free_data_contents(NULL,&krb5_ap_req); + * + * Now using real RFC 2712 KerberosWrapper + * (Thanks to Simon Wilkinson ) + * Note: 2712 "opaque" types are here replaced + * with a 2-byte length followed by the value. + * Example: + * KerberosWrapper= xx xx asn1ticket 0 0 xx xx encpms + * Where "xx xx" = length bytes. Shown here with + * optional authenticator omitted. + */ /* KerberosWrapper.Ticket */ s2n(enc_ticket->length, p); @@ -2495,13 +2495,13 @@ int ssl3_send_client_key_exchange(SSL *s) if (RAND_bytes(&(tmp_buf[2]), sizeof tmp_buf - 2) <= 0) goto err; - /*- - * 20010420 VRS. Tried it this way; failed. - * EVP_EncryptInit_ex(&ciph_ctx,enc, NULL,NULL); - * EVP_CIPHER_CTX_set_key_length(&ciph_ctx, - * kssl_ctx->length); - * EVP_EncryptInit_ex(&ciph_ctx,NULL, key,iv); - */ + /*- + * 20010420 VRS. Tried it this way; failed. + * EVP_EncryptInit_ex(&ciph_ctx,enc, NULL,NULL); + * EVP_CIPHER_CTX_set_key_length(&ciph_ctx, + * kssl_ctx->length); + * EVP_EncryptInit_ex(&ciph_ctx,NULL, key,iv); + */ memset(iv, 0, sizeof iv); /* per RFC 1510 */ EVP_EncryptInit_ex(&ciph_ctx, enc, NULL, kssl_ctx->key, iv); @@ -2648,26 +2648,26 @@ int ssl3_send_client_key_exchange(SSL *s) * ecdh_clnt_cert to 1. */ if ((alg_k & (SSL_kECDHr | SSL_kECDHe)) && (s->cert != NULL)) { - /*- - * XXX: For now, we do not support client - * authentication using ECDH certificates. - * To add such support, one needs to add - * code that checks for appropriate - * conditions and sets ecdh_clnt_cert to 1. - * For example, the cert have an ECC - * key on the same curve as the server's - * and the key should be authorized for - * key agreement. - * - * One also needs to add code in ssl3_connect - * to skip sending the certificate verify - * message. - * - * if ((s->cert->key->privatekey != NULL) && - * (s->cert->key->privatekey->type == - * EVP_PKEY_EC) && ...) - * ecdh_clnt_cert = 1; - */ + /*- + * XXX: For now, we do not support client + * authentication using ECDH certificates. + * To add such support, one needs to add + * code that checks for appropriate + * conditions and sets ecdh_clnt_cert to 1. + * For example, the cert have an ECC + * key on the same curve as the server's + * and the key should be authorized for + * key agreement. + * + * One also needs to add code in ssl3_connect + * to skip sending the certificate verify + * message. + * + * if ((s->cert->key->privatekey != NULL) && + * (s->cert->key->privatekey->type == + * EVP_PKEY_EC) && ...) + * ecdh_clnt_cert = 1; + */ } if (s->session->sess_cert->peer_ecdh_tmp != NULL) { -- cgit v1.2.3