Age | Commit message (Collapse) | Author |
|
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12463)
|
|
The commit claimed to make things more consistent. In fact it makes it
less so. Revert back to the previous namig convention.
This reverts commit 765d04c9460a304c8119f57941341a149498b9db.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12186)
|
|
EVP_MAC_CTX_*"
The commit claimed to make things more consistent. In fact it makes it
less so. Revert back to the previous namig convention.
This reverts commit d9c2fd51e2e278bc3f7793a104ff7b4879f6d63a.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12186)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12226)
|
|
Deprecate SSL_get_peer_certificte() and replace with
SSL_get1_peer_certificate().
Add SSL_get0_peer_certificate.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8730)
|
|
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12311)
|
|
Added Algorithm names AES-128-CBC-CTS, AES-192-CBC-CTS and AES-256-CBC-CTS.
CS1, CS2 and CS3 variants are supported.
Only single shot updates are supported.
The cipher returns the mode EVP_CIPH_CBC_MODE (Internally it shares the aes_cbc cipher code). This
would allow existing code that uses AES_CBC to switch to the CTS variant without breaking code that
tests for this mode. Because it shares the aes_cbc code the cts128.c functions could not be used directly.
The cipher returns the flag EVP_CIPH_FLAG_CTS.
EVP_CIPH_FLAG_FIPS & EVP_CIPH_FLAG_NON_FIPS_ALLOW have been deprecated.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12094)
|
|
The existing wording didn't capture the reality of the default setup, this new
nomenclature attempts to improve the situation.
Reviewed-by: Mark J. Cox <mark@awe.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12366)
|
|
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12096)
|
|
This moves test/ossl_test_endian.h to include/internal/endian.h and
thereby makes the macros in there our standard way to check endianness
in run-time.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/12390)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12402)
|
|
Fixes #11864
- The dsa keygen assumed valid p, q, g values were being passed. If this is not correct then it is
possible that dsa keygen can either hang or segfault.
The fix was to do a partial validation of p, q, and g inside the keygen.
- Fixed a potential double free in the dsa keypair test in the case when in failed (It should never fail!).
It freed internal object members without setting them to NULL.
- Changed the FFC key validation to accept 1024 bit keys in non fips mode.
- Added tests that use both the default provider & fips provider to test these cases.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12176)
|
|
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12379)
|
|
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12379)
|
|
As long as we have at least one provider loaded which offers some
groups, it doesn't matter if we have others loaded that don't.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12292)
|
|
Some applications want even all plaintext copies beeing
zeroized. However, currently plaintext residuals are kept in rbuf
within the s3 record layer.
This patch add the option SSL_OP_CLEANSE_PLAINTEXT to its friends to
optionally enable cleansing of decrypted plaintext data.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12251)
|
|
Test separately EC parameters and EC key generation.
Some curves only support explicit params encoding.
For some curves we have had cases in which generating the parameters
under certain conditions failed, while generating and serializing a key
under the same conditions did not.
See <https://github.com/openssl/openssl/issues/12306> for more details.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12307)
|
|
sslcorrupttest was looking for a "decryption failed or bad record mac"
error in the queue. However if there were multiple errors on the queue
then it would fail to find it. We modify the test to check all errors.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
|
|
For CBC ciphersuites using Mac-then-encrypt we have to be careful about
removing the MAC from the record in constant time. Currently that happens
immediately before MAC verification. Instead we move this responsibility
to the various protocol "enc" functions so that MAC removal is handled at
the same time as padding removal.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
|
|
We now check that if libcrypto hasn't loaded the string for some particular
system error, it gives us "reason(nnn)" instead, where 'nnn' is the system
error number in decimal.
We go through all possible error macros that perl serves us, not only the
POSIX ones.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/12343)
|
|
test/errtest.c used the system error code 1 for EPERM. However, EPERM
may be coded differently on different systems, so we switch to using
EPERM instead. However, because we know that the ERR sub-system
truncates system error codes that occupy more than 24 bits, we check
that the reason code in the recorded error matches our EPERM, and skip
the test if not.
To be safe (even though the error string for that code is well defined
in POSIX), we also use strerror() to retrieve the string for that
error code instead of using a hard coded value.
Fixes #12276
Fixes #12217
Fixes #12354
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/12343)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12109)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12109)
|
|
[extended tests]
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12275)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12280)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12280)
|
|
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12279)
|
|
VFP modes
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12279)
|
|
Make the improved semantics of VFO replace the previous VF and remove VFO
Add warnings about overriding use of HARNESS_VERBOSE* variables
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12279)
|
|
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/12326)
|
|
The environment variable `HARNESS_JOBS` can be used to control how many
jobs to run in parallel. The default is still to run jobs sequentially.
This commit does not define custom `rules`, and different versions of
`TAP::Harness` come with different strategies regarding the default
`rules` that define which test recipes can be run in parallel.
In recent versions of Perl, unless specified otherwise any task can be
run in parallel.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/12326)
|
|
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10587)
|
|
Move check that cert signing is allowed from x509v3_cache_extensions() to
where it belongs: internal_verify(), generalize it for proxy cert signing.
Correct and simplify check_issued(), now checking self-issued (not: self-signed).
Add test case to 25-test_verify.t that demonstrates successful fix
Fixes #1418
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10587)
|
|
X25519 certs
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10587)
|
|
by adding CA basic constraints, CA key usage, and key IDs to the cert
and by add -partial_chain to the verify call that trusts this cert
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10587)
|
|
etc.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10587)
|
|
Change default FIPS HMAC KEY from all-zero's
Use default FIPSKEY if not given on command line.
Make all -macopt in fipsinstall optional
Make all tests, except fipsinstall, use the default -macopt and
-mac_name flags.
Define and use FIPSDIR variable on VMS/MMS.
Also use SRCDIR/BLDDIR in SRCTOP/BLDTOP.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12235)
|
|
references
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12232)
|
|
Even if a fibre changes the default libctx - or the main application code
changes it, the "current" default libctx should remain consistent.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12228)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12228)
|
|
This has as effect that SHA1 and MD5+SHA1 are no longer supported at
security level 1, and that TLS < 1.2 is no longer supported at the
default security level of 1, and that you need to set the security
level to 0 to use TLS < 1.2.
Reviewed-by: Tim Hudson <tjh@openssl.org>
GH: #10787
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
GH: #10787
|
|
There currently do not support 'ec_param_enc:explicit' with provider
side key generation. Reflect that by encoding the expected failure
with a Test::More TODO section for those particular tests.
Because the tests in this recipe are data driven, we implement this
mechanism with two functions, one for stuff that's supported and one
for stuff that isn't.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12080)
|
|
This commit adds a new recipe to test EC key generation with the
`genpkey` CLI app.
For each built-in curve, it tests key generation with text output, in
PEM and in DER format, using `explicit` and `named_curve` for parameters
encoding.
The list of built-in curves is static at the moment, as this allows to
differentiate between prime curves and binary curves to avoid failing
when ec2m is disabled.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12080)
|
|
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12273)
|
|
The new naming scheme consistently usese the `OSSL_FUNC_` prefix for all
functions which are dispatched between the core and providers.
This change includes in particular all up- and downcalls, i.e., the
dispatched functions passed from core to provider and vice versa.
- OSSL_core_ -> OSSL_FUNC_core_
- OSSL_provider_ -> OSSL_FUNC_core_
For operations and their function dispatch tables, the following convention
is used:
Type | Name (evp_generic_fetch(3)) |
---------------------|-----------------------------------|
operation | OSSL_OP_FOO |
function id | OSSL_FUNC_FOO_FUNCTION_NAME |
function "name" | OSSL_FUNC_foo_function_name |
function typedef | OSSL_FUNC_foo_function_name_fn |
function ptr getter | OSSL_FUNC_foo_function_name |
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12222)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12222)
|
|
THe EVP_RAND wrapper works with the underlying RNG to produce the amount of
random data requested even if it is larger than the largest single generation
the source allows. This test verified that this works.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11682)
|
|
[extended tests]
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11682)
|
|
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11682)
|