| Age | Commit message (Collapse) | Author |
|---|
|
PR#4462
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
No code change
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
The TLSProxy based tests don't work when TLS is disabled so we shouldn't
run them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Add tests for ASN.1 INTEGER: invalid tag, valid 0, 1, -1 and 0, -1 with
illegal padding.
Also add ASN1_ANY tests for 0, 1 and -1.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Fix some of the variables to be (s)size_t, so that more than 1GB of
secure memory can be allocated. The arena has to be a power of 2, and
2GB fails because it ends up being a negative 32-bit signed number.
The |too_late| flag is not strictly necessary; it is easy to figure
out if something is secure memory by looking at the arena. As before,
secure memory allocations will not fail, but now they can be freed
correctly. Once initialized, secure memory can still be used, even if
allocations occured before initialization.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Most of the tests already pass with EBCIDC but a few were trying to
write into read only memory.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/952)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Bad ASN.1 data should never be able to trigger a malloc failure so return
an error in d2i_test if a malloc failure occurs.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Using ASN1_ITEM tables in d2i_test: this then uses consistent names and
makes it easier to extend.
Add bio, reencode and compare tests.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Our main development platforms are of the Unix family, which doesn't
have the same strictness regarding a shared library being consistent
with the contents of the ld script (.map file, on Linux and Solaris)
as Windows is with the contents of the .def file or VMS is with the
linker symb_vector option.
To eliminate surprises, we therefore need to make sure to check that
the contents of the .map file is matched with the shared library, at
least to check that the shared library isn't missing any symbols that
should be present.
This test isn't absolutely perfect, as it will only check the symbols
that would be present on Linux / Solaris and will therefore miss those
that would only appear on Windows or VMS. On the other hand, those
platform specific are few and far apart in time, so it's not likely
they will pose a problem.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
The Unix build was the last to retain the classic build scheme. The
new unified scheme has matured enough, even though some details may
need polishing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Add copyright to most .pl files
This does NOT cover any .pl file that has other copyright in it.
Most of those are Andy's but some are public domain.
Fix typo's in some existing files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Give the API new names, document it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Make OBJ_name_cmp internal
Rename idea_xxx to IDEA_xxx
Rename get_rfc_xxx to BN_get_rfc_xxx
Rename v3_addr and v3_asid functions to X509v3_...
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Make X509_OBJECT, X509_STORE_CTX, X509_STORE, X509_LOOKUP,
and X509_LOOKUP_METHOD opaque.
Remove unused X509_CERT_FILE_CTX
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
|
|
no-stdio does not work with the apps. Since the tests also need the apps
it doesn't support that either. Therefore we disable building of both.
no-autoalginit is not compatible with the apps because it requires explicit
loading of the algorithms, and the apps don't do that. Therefore we disable
building the apps for this option. Similarly the tests depend on the apps
so we also disable the tests. Finally the whole point about no-autoalginit
is to avoid excessive executable sizes when doing static linking. Therefore
we disable "shared" if this option is selected.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
During Configure we attempt to check the kernel version of this platform
to see whether we can compile the AFALG engine. If the kernel version
looks recent enough then we enable AFALG. However when we compile
e_afalg.c we check the version of the linux headers. If there is a
mismatch between the linux headers and the currently running kernel then
we don't compile the AFLAG engine and continue. This was causing a link
error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
The above config options were failing in test_ssl_old.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
The no-tls option was failing in the tests. This fixes it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Misc fixes to get no-nextprotoneg config option working again.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
The simple reason is that the pre-generated files are mainly for Unix.
The VMS variants look slightly different, so comparing will always fail.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Don't add / in file specs on VMS. The directory "separator" is part
of the directory spec.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Move the dh_st structure into an internal header file and provide
relevant accessors for the internal fields.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Suppress CT callbacks with aNULL or PSK ciphersuites that involve
no certificates. Ditto when the certificate chain is validated via
DANE-TA(2) or DANE-EE(3) TLSA records. Also skip SCT processing
when the chain is fails verification.
Move and consolidate CT callbacks from libcrypto to libssl. We
also simplify the interface to SSL_{,CTX_}_enable_ct() which can
specify either a permissive mode that just collects information or
a strict mode that requires at least one valid SCT or else asks to
abort the connection.
Simplified SCT processing and options in s_client(1) which now has
just a simple pair of "-noct" vs. "-ct" options, the latter enables
the permissive callback so that we can complete the handshake and
report all relevant information. When printing SCTs, print the
validation status if set and not valid.
Signed-off-by: Rob Percival <robpercival@google.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
The environment variables TOP, SRCTOP, BLDTOP, ... are used to affect
the testing framework. However, subprocesses may want to use them as
well, and therefore need their values corrected when we move to a
different directory.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Move rsa_st away from public headers.
Add accessor/writer functions for the public RSA data.
Adapt all other source to use the accessors and writers.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Misc fixes for no-ocsp
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
ssltest_old.c is deprecated. New tests should use ssl_test.c, and the
recipes in 80-test_ssl_new.t
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Require that test methods return 1 on success (not 0). This is more
customary for OpenSSL.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Currently, SSL tests are configured via command-line switches to
ssltest.c. This results in a lot of duplication between ssltest.c and
apps, and a complex setup. ssltest.c is also simply old and needs
maintenance.
Instead, we already have a way to configure SSL servers and clients, so
we leverage that. SSL tests can now be configured from a configuration
file. Test servers and clients are configured using the standard
ssl_conf module. Additional test settings are configured via a test
configuration.
Moreover, since the CONF language involves unnecessary boilerplate, the
test conf itself is generated from a shorter Perl syntax.
The generated testcase files are checked in to the repo to make
it easier to verify that the intended test cases are in fact run; and to
simplify debugging failures.
To demonstrate the approach, min/max protocol tests are converted to the
new format. This change also fixes MinProtocol and MaxProtocol
handling. It was previously requested that an SSL_CTX have both the
server and client flags set for these commands; this clearly can never work.
Guide to this PR:
- test/ssl_test.c - test framework
- test/ssl_test_ctx.* - test configuration structure
- test/handshake_helper.* - new SSL test handshaking code
- test/ssl-tests/ - test configurations
- test/generate_ssl_tests.pl - script for generating CONF-style test
configurations from perl inputs
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
This reverts commit 620d540bd47a96fb6905fbbdd8ea5167a8841a3e.
It wasn't reviewed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
These leaks affect 1.1.0 dev branch only; introduced around commit
f93ad22f6adb00e722c130e792799467f3927b56
Found with LibFuzzer
Reviewed-by: Ben Laurie <ben@openssl.org>
|
|
A new X509_VERIFY_PARAM_set_auth_level() function sets the
authentication security level. For verification of SSL peers, this
is automatically set from the SSL security level. Otherwise, for
now, the authentication security level remains at (effectively) 0
by default.
The new "-auth_level" verify(1) option is available in all the
command-line tools that support the standard verify(1) options.
New verify(1) tests added to check enforcement of chain signature
and public key security levels. Also added new tests of enforcement
of the verify_depth limit.
Updated documentation.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
|
|
Move the dsa_method structure out of the public header file, and provide
getter and setter functions for creating and modifying custom DSA_METHODs.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
|
|
Move the dsa_st structure out of the public header file. Add some accessor
functions to enable access to the internal fields, and update all internal
usage to use the new functions.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
|
